PIQInfo.rsc!:\system\OPL\PIQInfo.rscPIQInfo.opo!:\system\OPL\PIQInfo.opoPIQInfo.mbm!:\system\OPL\PIQInfo.mbmPocket IQ Library!
Copyright
Version:Visit us at www.PocketIQ.comPocket IQ information noticeThis file is an essential shared elementof Pocket IQ applications. Please do notdelete or alter in way, as doing so mayaffect applications in the Pocket IQ range.ContinuePutting the IQ back in shareware
h:\Editor\data\Editor.mBW!:\System\Apps\Editor\Editor.mbmh:\epoc32\release\MARM\rel\Editor.rSC!:\System\Apps\Editor\Editor.rsch:\Editor\aif\Editor.aif!:\System\Apps\Editor\Editor.aifh:\epoc32\release\MARM\rel\Editor.app!:\System\Apps\Editor\Editor.appC:\System\Apps\Editor\Editor.iniSymbian Text Editor7
9d9GT
Editor.txt
Spell
Find
Recent
files
Spell
Find
Format
Tools
Create new file
Open file
Printing
Recent files
Close
Page setup
Print setup
Print preview
Print
Save as
Revert to saved
Import text file
Paste
Select all
Insert special character
Find again
Replace
Zoom in
Zoom out
Show toolbar
Show scroll bars
Vertical
Horizontal
Indentation
Wrapping
View preferences
Spell check
Word count
Infrared
Help on Editor
About Editor
Receive
Indentation
Tabs every
characters
Automatically indent
Wrapping
Continuous wrapping
Wrap width
characters
Spell checking
Progress
Spell: Unrecognised word
Spell: Word is too long to check
Unrecognised word:
Skip all
Add to
dictionary
Correct
Skip all
Correct
Spell: Correcting a word
Word to correct:
Correction
Suggestions
Cancel
Correct all
Correct
View preferences
General
Advanced
Show tabs
Show spaces
Show non-breaking spaces
Show paragraph ends
Show forced line breaks
Show hard hyphens
Show 'System' folder
About Editor
EPOC Text Editor
!Copyright
Symbian Ltd 1998-2000
All rights reserved.
"Editor program - Version 1.36(043)
Revert to saved?
All changes will be lost
File has not changedNo suggestionsEnter a correctionUnrecognised word "%S"1 unrecognised word%D unrecognised words1 unrecognised word in the selection%D unrecognised words in the selectionOpening dictionaries... Personal dictionary is not enabledPersonal dictionary is not availableSpell checking selectionCannot start spell checkerInformationNo words to spell checkCreate new fileSavedNo recent filesWords: %dEditor.hlpHelp file not foundEditor Help is already openSwitch to Help using the list of open filesThis file is read-only
export.dbf select formatset, file,format,field,lastfield,prefile,postfile,prerecord,postrecord,startrecord,prefield,postfield,Note_NoOfLines,Note_LineWidth from format
FORMATSET$
FILE$
FORMAT%
FIELD$
LASTFIELD%
PREFILE$
POSTFILE$
PRERECORD$
POSTRECORD$
STARTRECORD%
PREFIELD$
POSTFIELD$
NOTE_NOOFLINES%
NOTE_LINEWIDTH%
FORMATSET$#
Import/Export parametersO
+ <No Sets>
FORMATSET$#
,...K
FORMATSET$#
SetOs+
FormatOf+
LabelOl+
CabinetOc+
NotesOn+
ExportOx+
ImportOm+
CancelO
FORMATSET$#
FILE$#
FORMAT%
STARTRECORD%
FIELD$#
LASTFIELD%
PREFILE$#
+ POSTFILE$#
PRERECORD$#
POSTRECORD$#
STARTRECORD%
+ PREFIELD$#
POSTFIELD$#
NOTE_NOOFLINES%
NOTE_LINEWIDTH%
Export
Import
Import/Export canceled
ExportC[
Enter file to exportO
ExportO
Export canceled
Exporting
+Iexport.dbf select name, prompt from export where seq<>'9999' order by seq
NAME$
PROMPT$
Exporting :+
NAME$#
PROMPT$#
NAME$#
PROMPT$#
ImportC[(
Enter file to importO
ImportO
Import canceled
Importing
Opening
+Iexport.dbf select name, prompt from export where seq<>'9999' order by seq
NAME$
PROMPT$
<EOF>C
<EOF>Cd[
<EOF>C
<EOF>C[
PROMPT$#
NotesC[+
PROMPT$#
PROMPT$#
PROMPT$#
NotesC[+
PROMPT$#
<EOF>C[
PROMPT$#
PROMPT$#
NotesC[+
PROMPT$#
<EOF>C[
PROMPT$#
Importing O
ElemSequenceO
F10$'
F11%$
F14$'
F15&%
F16$'
F17$'
F18$'
F19&%
F20$'
ETYPE$'
NOTESO
.dbfKO
<EOF>C[
Could not import this file. W
- KW
R {IO
NOOFACTIVESCREENS%
PROMPT$
IMPORTDATA$
SHOWERROR
Expected:
(length: K
) - Found: K
(length: K
SETUPMULTILINE
GETMULTILINE$
export.dbf select file,format,field,lastfield,prefile,postfile,prerecord,postrecord,startrecord,prefield,postfield,Note_NoOfLines,Note_LineWidth from format where formatset='
FILE$
FORMAT%
FIELD$
LASTFIELD%
PREFILE$
POSTFILE$
PRERECORD$
POSTRECORD$
STARTRECORD%
PREFIELD$
POSTFIELD$
NOTE_NOOFLINES%
NOTE_LINEWIDTH%
PREFILE$#
+ POSTFILE$#
PRERECORD$#
POSTRECORD$#
+ PREFIELD$#
POSTFIELD$#
FORMAT%
STARTRECORD%
FIELD$#
LASTFIELD%
Export formatO
Format+ List,Form
+ File HeadO
+ File FootO
Before RecordO
After RecordO
End with 'After Record'
Field separator
End with field separator
Before FieldO
After FieldO
SaveOs+
CancelO
W7Os@[
FORMAT%$
PREFILE$'
+ POSTFILE$'
PRERECORD$'
POSTRECORD$'
+ PREFIELD$'
POSTFIELD$'
STARTRECORD%$
FIELD$'
LASTFIELD%$
DATESTR$
EXPORTNOTE
WRITETOKEN
PROMPT$
F10$#
F11%
F14$#
F15&!
F16$#
F17$#
F18$#
F19&!
F20$#
NotesC[0
+<export.dbf select name,prompt, seq from export where ftype='
' order by seqK
NAME$
PROMPT$
+)Field sequence (empty fields are skipped)O
SEQ$#
9999C[
SEQ$#
NAME$#
PROMPT$#
CancelO
SEQ$'
SEQ$'
+Kexport.dbf select name,prompt, seq from export where ftype='N' order by seq
NAME$
PROMPT$
+Nexport.dbf select note_NoOfLines, Note_LineWidth from format where formatset='
NOTE_NOOFLINES%
NOTE_LINEWIDTH%
SEQ$#
9999C[
SEQ$#
NOTE_NOOFLINES%
NOTE_LINEWIDTH%
Settings for export of notesO
Sequence No
Number Of LinesO
Line WidthO
CancelO
SEQ$'
SEQ$'
NOTE_NOOFLINES%$
NOTE_LINEWIDTH%$
WRITETOKEN
FETCHTEXT&
MAXNOTESIZE%
APPSHORT$
+Nexport.dbf select note_NoOfLines, Note_LineWidth from format where formatset='
NOTE_NOOFLINES%
NOTE_LINEWIDTH%
NOTESO
.dbfKO
NOTE_NOOFLINES%
NOTE_NOOFLINES%
@`\[V
NOTE_LINEWIDTH%
NOTE_LINEWIDTH%
0\d[!
NOTE_NOOFLINES%
READLINE$
SHOWERROR
+Nexport.dbf select note_NoOfLines, Note_LineWidth from format where formatset='
NOTE_NOOFLINES%
NOTE_LINEWIDTH%
NOTE_NOOFLINES%
NOTE_NOOFLINES%
NOTE_LINEWIDTH%
O$h@[
NOTE_LINEWIDTH%
CHOICEDIALOG$
+2Export.dbf select formatset, formatset from formatO
New Name
+*Enter name of new export/import format set
export.dbf select formatset, file,format,field,lastfield,prefile,postfile,prerecord,postrecord,startrecord,prefield,postfield,Note_NoOfLines,Note_LineWidth from format
FORMATSET$
FILE$
FORMAT%
FIELD$
LASTFIELD%
PREFILE$
POSTFILE$
PRERECORD$
POSTRECORD$
STARTRECORD%
PREFIELD$
POSTFIELD$
NOTE_NOOFLINES%
NOTE_LINEWIDTH%
FORMATSET$'
+9export.dbf select formatset from format where formatset='
FORMATSET$
+"Edit export/import format set name
FORMATSET$'
export.dbf select formatset, file,format,field,lastfield,prefile,postfile,prerecord,postrecord,startrecord,prefield,postfield,Note_NoOfLines,Note_LineWidth from format where formatset='
FORMATSET$
FILE$
FORMAT%
FIELD$
LASTFIELD%
PREFILE$
POSTFILE$
PRERECORD$
POSTRECORD$
STARTRECORD%
PREFIELD$
POSTFIELD$
NOTE_NOOFLINES%
NOTE_LINEWIDTH%
EXPORT
IMPORTFIELD
IMPORTERROR
EXPORTFORMAT
WRITEFIELD
EXPORTFIELDSl
EXPORTNOTES
EXPORTNOTE>
IMPORTNOTEP
CHANGESET$
SYSRAM1
SYSTEM\
D:\programs\Cabinet\cabinet.opl
File: CABINET.OPO
Version: 2.1.2
+0 This file cannot be executed by itself
+; Copyright
1998-2000 Marc de Oliveira & PocketIQ
EVENT
PROCESS
ERROR_HANDLER
SHIFT%
CONTROL%
APPTITLE$
APPVER$
EMAIL$
TBAROFFER%
POINTER_EVENT
FINDLAST
FINDFIRST
ACTIVEWINDOWS
FINDNEXT
FINDPREVIOUS
NEXTELEM
PREVIOUSELEM
DISPLAY_MENU
ACTION_KEY
SHIFT%
CONTROL%
{A`[n
'{A`[
TOOLSWITCH
ABOUT
REREGISTER
FINDNEXT
FINDPREVIOUS
FINDLAST
FINDFIRST
DOPERSONALINFO
DOBOTTLEINFO
DOLISTVIEW
BOTTLENOTES
DELETEELEM
NEWBOTTLE
ACTIVEWINDOWS
DOSELECTELEMTYPE
FINDELEM
FINDNOTE
SFINDELEM
DOEXPORT
SHOWPRICES
FINDSPACE
EDITRATINGS
DOEDITTAPE
EDITTAPES
PREFERENCES
REG_KEY$
APPSHORT$
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
0123456789
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
VideoC[
O`L{A[:
WineC[
VideoC[
O`L{A[)
VideoC[
F17$#
O`L{A[
O {A[
RESETPRINTING
PAGESETUPDIALOG
PRINT
PRINTPREVIEWDIALOG
O`L{A[
O`L{A[
Printer not connected
REREGISTER
PATH$
APPSHORT$
REG_NAME$
REG_KEY$
PREF_RATING%
.iniKW
.iniK
PATH$
APPSHORT$
REG_NAME$
REG_KEY$
PREF_RATING%
.iniK
.iniK
REGISTER$
SETUP_SCREEN
APPTITLE$
REG_NAME$
REG_KEY$
NAGWIN%
Unregistered
0123456789
FIELDNAME$
WRAPLINE$
SETUP_TOOLBAR
DEVICE
FINDOPO$
CREATEINDEX
NEXTID$
LOAD_INI_FILE
OPENELEMS
OPENELEMTYPES
TBARBUTT
FALSE
FIELDLIST1$
FIELDLIST2$
FIELDLIST3$
NOOFACTIVESCREENS%
INUSE%
PROMPT$
APPSHORT$
PATH$
ICON$
GELEM1&
GELEM2&
GELEM3&
GELEM4&
MAINTOOL&
DELTOOL&
NEWTOOL&
HELPID&
MAINTABLE$
MAINELEMS$
MAINELEM$
REG_NAME$
CU_POS&
CU_COUNT&
Fields:
c:\system\apps\
.appKW
c:\system\apps\
\system\apps\
d:\system\apps\
.appKW
d:\system\apps\
\system\apps\
.mbmK
Graphics not found:
.dbfKW
+'First time installation, please wait...
.dbf fields ID(10)K
(250)K
(10)K
(250)K
(250)K
(250)K
(250)K
(250)K
(250)K
(30)K
(30)K
(30)K
(250)K
to K
IDIndK
.dbfK
F1IndK
.dbfK
F2IndK
.dbfK
F3IndK
.dbfK
F4IndK
.dbfK
F5IndK
.dbfK
F6IndK
.dbfK
F7IndK
.dbfK
F8IndK
.dbfK
F11IndK
.dbfK
F12IndK
.dbfK
F13IndK
.dbfK
F14IndK
.dbfK
F15IndK
.dbfK
F16IndK
.dbfK
F17IndK
.dbfK
F18IndK
.dbfK
F19IndK
.dbfK
F20IndK
.dbfK
VideoC[]
+ upg21.opoO
+ upg22.opoO
MusicC[S
BandO
YearO
MainIndK
.dbfK
+*.dbf fields ID(10), EType(30) to ElemTypesK
ETYPE$
+ TypeIdInd
.dbfK+ ElemTypes
EtypeO
TypeEtypeInd
.dbfK+ ElemTypes
+4.dbf fields ID(10), L, TType(10), Text(250) to TextsK
TTYPE$
TEXT$
TTypeO
+ TextIdInd
.dbfK+
Texts
+#.dbf fields NextVal TO ElemSequenceK
SEQ&%
+#.dbf fields NextVal TO TextSequenceK
SEQ&%
+".dbf fields name(30) TO RegisteredK
NAME$
NAME$'
Unregistered
+4.dbf fields id(10), Name(30), clause(255) TO ClausesK
NAME$
CLAUSE$
+ ClauseIndK
.dbfK+
Clauses
NameO
ClauseNameIndK
.dbfK+
Clauses
+).dbf select id, name, clause from clausesK
NAME$
CLAUSE$
ElemSequenceO
BookC[\
NAME$'
Lent Out
CLAUSE$'
+'amount>0 and LentTo<>'' order by LentTo
VideoC[
NAME$'
Lent out
CLAUSE$'
+1amount>0 and LentTo<>'' order by TapeNo, StartPos
ElemSequenceO
NAME$'
Motion Pictures
CLAUSE$'
+Iamount>0 and Categories like '*Motion Picture*' order by TapeNo, StartPos
MusicC[h
NAME$'
Lent out
CLAUSE$'
amount>0 and LentTo<>''
ElemSequenceO
ArtC[
NAME$'
Lent out
CLAUSE$'
Elements>0 and LentTo<>''
ElemSequenceO
NAME$'
No Location
CLAUSE$'
Elements>0 and Location=''
WineC[
NAME$'
Ready To Drink
CLAUSE$'
+0amount>0 and ReadyYear<'2000' order by ReadyYear
ElemSequenceO
NAME$'
French Wines
CLAUSE$'
+.amount>0 and area like '*France' order by area
ElemSequenceO
NAME$'
Californian Wines
CLAUSE$'
+3amount>0 and area like '*California*' order by area
ElemSequenceO
NAME$'
Portuguese Wines
CLAUSE$'
+0amount>0 and area like '*Portugal' order by area
export.dbfW
+Bexport.dbf Fields name(20), prompt(20), seq(5), ftype(1) to export
NAME$
PROMPT$
FTYPE$
NAME$'
PROMPT$'
SEQ$'
SEQ$'
FTYPE$'
FTYPE$'
NAME$'
Notes
PROMPT$'
Notes
SEQ$'
FTYPE$'
+ ExpSeqInd
Export.dbf+
Export
export.dbf fields formatset(20), file(255), format, field(20), lastfield, prefile(255), postfile(255), prerecord(255), postrecord(255), startrecord, prefield(255), postfield(255), Note_NoOfLines, Note_LineWidth to format
FORMATSET$
FILE$
FORMAT%
FIELD$
LASTFIELD%
PREFILE$
POSTFILE$
PRERECORD$
POSTRECORD$
STARTRECORD%
PREFIELD$
POSTFIELD$
NOTE_NOOFLINES%
NOTE_LINEWIDTH%
FORMATSET$'
HTML Export
FILE$'
.expK
FORMAT%$
PREFILE$'
<html><head><title>
K+& List</title></head><body><center><h1>K
K+n List</h1><h2>Send queries and coments to <a href="mailto:My@Email.address">My@Email.address</a></h2></center>K
+ POSTFILE$'
<hr><i>Last updated on W
by K
</i></body></html>K
FIELD$'
<li><b>
+ PREFIELD$'
+ </b>: <i>
POSTFIELD$'
LASTFIELD%$
PRERECORD$'
<hr><ul>
POSTRECORD$'
</ul>
STARTRECORD%$
NOTE_NOOFLINES%$
NOTE_LINEWIDTH%$
FORMATSET$'
Sheet Export
FILE$'
.expK
FORMAT%$
PREFILE$'
+ POSTFILE$'
FIELD$'
+ PREFIELD$'
POSTFIELD$'
LASTFIELD%$
PRERECORD$'
POSTRECORD$'
STARTRECORD%$
NOTE_NOOFLINES%$
NOTE_LINEWIDTH%$
NoteO
HelpO
area='K
and(
area='K
and(
and area is null
ADDWHERE$
ALERT_INFO
SFIND$
MAINTABLE$
APPSHORT$
MAINELEMS$
where
.dbf select * from K
The Where-Clause is
characters too longKO
SETUP_SCREEN
PREF_RATING%
Preferences
Rating Style+SAsterix Scale (0-5),10 Point Scale,20 Point Scale,100 Point Scale, Description, Off
CancelO
REGISTER$
APPSHORT$
APPTITLE$
+ .dbf select name from RegisteredK
NAME$
NAME$#
UnregisteredC[
NAME$'
TBARINIT
TBARHIDE
TBARSHOW
APPSHORT$
TOOLBAR%
SCREENWIDTH%
W.OFL
DOBOTTLEINFO
NEWBOTTLE
BOTTLENOTES
DOBOTTLEINFO
DOSELECTELEMTYPE
DOPERSONALINFO
BOTTLENOTES
MAINSCN%
SCREEN%
{A` O
{A` O
{A` O
{A` O
{A` O
{A` O
{A` O
{A` O
{A` O
{A` O
{A` O
{A` O
{A` O
TBARHIDE
TBARSHOW
SETUP_SCREEN
TOOLBAR%
SCREENWIDTH%
DATESTR$
FETCHRATING$
WRAPLINE$
SCREEN%
SCREENW%
SCREENX%
SCREENWIDTH%
SCREENY%
SCREENH%
INUSE%
FONT&
ALIGNMENT%
PROMPT$
APPSHORT$
CU_POS&
CU_COUNT&
REG_NAME$
GELEM1&
GELEM2&
GELEM3&
GELEM4&
ETYPE$#
No Id
<No O
WineC+
WineC[*
% alc.K
StampC[!
WineC[(
ArtC[5
O @[j
ArtC[
StampC["
F10$#
F11%
F14$#
F15&!
F16$#
F17$#
F18$#
HomeC
StampC`[
F19&!
F19&!
{U}WB
F19&!
QMO<{U}WB
F19&!
QMO<{
QM}WB
F20$#
WineC[
+&.dbf select text from texts where ID='K+
K+"' and TType='NOTES' order by id, lK
TEXT$
TEXT$#
Find:
O$@[)
WineC[
Area Rating:
TBARSETTITLE
DEVICE
PATH$
APPSHORT$
HELPTHREAD&
.hlpKO
.hlpK
Help file (
.hlp) not foundK
EXIT$
SAVE_INI_FILE
FINDOPO$
HELPTHREAD&
Closing, please wait...
cabinet.opoO
pythia.opoO
SETUP_SCREEN
NOOFACTIVESCREENS%
NOOFSCREENS%
INUSE%
SETUP_SCREEN
NOOFACTIVESCREENS%
INUSE%
FALSE
BOTTLEINFO
SETUP_SCREEN
INUSE%
PERSONALINFO
SETUP_SCREEN
INUSE%
SETUPMULTILINE
GETMULTILINE$
DOPERSONALINFO
BOTTLENOTES
DOSELECTELEMTYPE
INUSE%
MAINELEM$
PROMPT$
CU_LIST%
CU_LIST$
to maintainK
F10$#
+ Maintain
InformationKO
<No O
ETYPE$#
,...K
ETYPE$#
SaveOsO
Collection InfoOa+
NotesOn
F10$'
Os@[^
SETUPMULTILINE
GETMULTILINE$
MAINELEM$
INUSE%
PROMPT$
APPSHORT$
to maintainK
O"{WK
O"{WK
O"{WK
F14$#
F16$#
F17$#
F18$#
F20$#
F11%
F15&!
F19&!
Maintain Collection InformationO
HomeC
StampC`[
SaveOs+
CancelO
F14$'
F16$'
F17$'
F18$'
F20$'
F11%$
F15&%
F19&%
Os@[J
MAINTAINBOTTLENOTES
SETUP_SCREEN
FETCHTEXT&
STORETEXT
MAINELEM$
APPSHORT$
to maintainK
Notes for +
- K+
NOTESO
.dbfKO
SaveOs
Os@[-
NOTESO
.dbfKO
OPENELEMS
OPENELEMTYPES
ACTIVEWINDOWS
CU_POS&
Jumping to first
Jumping to first
ACTIVEWINDOWS
CU_POS&
CU_COUNT&
Jumping to last
NEXTID$
ALERT_YESNOCANCEL$
OPENELEMS
BOTTLEINFO
ACTIVEWINDOWS
APPSHORT$
MAINELEM$
SFIND$
CU_COUNT&
CU_POS&
ElemSequenceO
Copy fields from +
into new K
+E(To avoid a bug in OPL your current where clause will now be cleared)O
F10$#
F11%
F14$#
F15&!
F16$#
F17$#
F18$#
F19&!
F20$#
WineC[#
F10$'
F11%$
F15&%
F14$'
F16$'
F17$'
F18$'
F19&%
F20$'
ALERT_OK$
ACTIVEWINDOWS
MAINELEM$
CU_COUNT&
CU_POS&
DeletingO
to deleteK
+ deleted.K
SELECTELEMTYPE$
SETUP_SCREEN
MAINELEM$
to updateK
NEWELEMTYPE$
EDITELEMTYPE$
DELETEELEMTYPE%
PROMPT$
MAINELEM$
CU_LIST%
CU_LIST$
Selection for current K
type not found (K
<No O
ETYPE$#
),...K
ETYPE$#
SelectO
EditOe+
NewOn+
DeleteOd+
CancelO
MAINELEM$
PROMPT$
NEW ID
TypeK
Create new O
CreateO
CancelO
ETYPE$'
REOPENELEMTYPES
CHANGEELEMTYPE
PROMPT$
not foundK
ETYPE$#
Edit O
SaveO
CancelO
ETYPE$'
CHANGEELEMTYPE
MAINELEM$
type not foundK
Another
type exists with this id (K
FIELDNAME$
REOPENELEMS
APPSHORT$
PROMPT$
MAINELEMS$
MAINELEM$
.dbf select id, KO
from K
where KO
cleared of this K
typeK
FINDFIRST
SCREEN%
FIND$
ACTIVEWINDOWS
CU_POS&
FIND$
MAINELEMS$
Jumping to first
Jumping to first
No more
ACTIVEWINDOWS
CU_POS&
CU_COUNT&
FIND$
MAINELEMS$
Jumping to last
No more
ACTIVEWINDOWS
FIND$
CU_POS&
+ Not found
ACTIVEWINDOWS
FIND$
CU_POS&
+ Not found
File,Folder,DiskK
CancelO
OPENELEMS
FIELDNAME$
PROMPT$
FIND$
APPSHORT$
MAINELEM$
Calculating...
> 0KO
MusicC
ArtC`[$
F11%
F11%
F11%
MusicC
ArtC`[#
Item Count:
Count:K
Title Count:
Total Spending:
Total Value:
Total Surplus:
Average Spending:
Average Value:
Total Surplus %:Od|
SETUPMULTILINE
FIELDNAME$
CHOICEDIALOG$
ALERT_INFO
NEXTID$
EDITCLAUSE
GETMULTILINE$
OPENELEMS
ACTIVEWINDOWS
ERROR_HANDLER
SFIND$
PROMPT$
APPSHORT$
FIELDLIST1$
FIELDLIST2$
FIELDLIST3$
TESTING%
CU_POS&
CU_COUNT&
MAINELEMS$
APPTITLE$
APPVER$
EMAIL$
+5Type in an SQL where clause (without the WHERE token)O
+6Abbreviations: (must be first character in the string)
a: O
o: order by
VideoC[)
ot: order by TapeNo, StartPos
ListOl+
SaveOs+
CancelO
Ol@[B
QueryO
+/.dbf select id, name from Clauses order by nameKO
+*.dbf select clause from Clauses where id='K
CLAUSE$
CLAUSE$#
ErrorO
Could not find selected clauseO
+).dbf select id, name, clause from ClausesK
NAME$
CLAUSE$
ElemSequenceO
NAME$'
New Clause
+*.dbf select clause from Clauses where id='K
CLAUSE$
ErrorO
Could not find selected clauseO
Os@[<
@`\['
o C["
order by
otC[!
order by TapeNo,StartPos
found, please retypeK
Bad query - please, retype W
SETUPMULTILINE
GETMULTILINE$
APPSHORT$
+4.dbf select id, name, clause from Clauses where id='K
NAME$
CLAUSE$
NAME$#
CLAUSE$#
Edit Clause:
ClauseO
SaveOs+
CancelO
W7Os@[1
NAME$'
CLAUSE$'
FINDOPO$
EXPORT
export.opoO
APPSHORT$
+3.dbf select ID, EType from ElemTypes order by etypeK
ETYPE$
ALERT_INFO
REOPENELEMS
ACTIVEWINDOWS
MAINELEMS$
SFIND$
APPSHORT$
CU_POS&
CU_COUNT&
+ Find Note
Set+$Find Note can only fetch sets of 12
+%Specify the set that you want to see.
1-12, 2: K
13-24 etc)K
Search for NoteO
CancelO
+<.dbf select id, l, ttype, text from texts where text like '*K
TTYPE$
TEXT$
id='K+
WarningO
could not be fetched. Try using a more precise search string or view the remaining sets separately. You will now be viewing set K
InformationO
No matching notes were foundO
Canceled
ADDWHERE$
FIELDNAME$
CHOICEDIALOG$
DOBOTTLEINFO
NEWBOTTLE
DELETEELEM
ACTIVEWINDOWS
SFIND$
APPSHORT$
PROMPT$
MAINELEMS$
CU_POS&
+%Enter field name to view in list view
+ List ViewO
.dbf select id,KO
from K
+ ORDER BY C[
and K
+ ORDER BY C[
where
DORUN
PROCESSy
ACTION_KEY
PRINTKEY
EVENTM
LOAD_INI_FILE
SAVE_INI_FILEC
REREGISTER
GETLISTORS$
OPENELEMS
PREFERENCES(,
TJEKREGISTRATION
SETUP_TOOLBAR
CMDA%
CMDB%7.
CMDC%Y.
CMDD%}.
POINTER_EVENT
TOOLSWITCH
SETUP_SCREEN
TOOLBARTITLEo;
BACKGROUND
FOREGROUND
STATICWINDOWS
ACTIVEWINDOWS%>
DEVICE
DOBOTTLEINFO
DOPERSONALINFO_?
BOTTLEINFO
PERSONALINFO
BOTTLENOTES8J
MAINTAINBOTTLENOTESzJ
REOPENELEMS
REOPENELEMTYPES
NEXTELEM
PREVIOUSELEMrL
NEWBOTTLE
DELETEELEM
DOSELECTELEMTYPE
SELECTELEMTYPE$OR
NEWELEMTYPE$
EDITELEMTYPE$
DELETEELEMTYPE%
CHANGEELEMTYPE
FINDELEM
FINDNEXT1Y
FINDPREVIOUS
FINDFIRST
FINDLAST:[
GETFILENAME$
SHOWPRICES
SFINDELEM
EDITCLAUSEXe
FIELDNAME$
DOEXPORT
OPENELEMTYPEScg
FINDNOTE
DOLISTVIEW
ADDWHERE$.m
DBASE[
SYSRAM1
SYSTEM\
D:\programs\Pythia\pythia
File: PYTHIA.OPO
Version: 1.8.1
+0 This file cannot be executed by itself
+= Copyright
1999-2000 PocketIQ & PYTHIA Information
ALERT_OK$
Exit programO
Shutting down...
SHOWERROR
APPSHORT$
C:\SYSTEM\OPL\
C:\SYSTEM\OPL\
D:\SYSTEM\OPL\
D:\SYSTEM\OPL\
+ The file
K+- is not found in \system\opl or \system\apps\K
APPSHORT$
APPYEAR$
APPAUTHOR$
SPLASHID&
SPLASHXPOS%
SPLASHYPOS%
APPTITLE$
APPVER$
APPEMAIL$
C:\SYSTEM\OPL\PIQInfo.rscW
C:\SYSTEM\OPL\PIQInfo.rsc
D:\SYSTEM\OPL\PIQInfo.rscW
D:\SYSTEM\OPL\PIQInfo.rsc
E:\SYSTEM\OPL\PIQInfo.rscW
E:\SYSTEM\OPL\PIQInfo.rsc
C:\SYSTEM\OPL\PIQInfo.mbmW
C:\SYSTEM\OPL\PIQInfo.mbm
D:\SYSTEM\OPL\PIQInfo.mbmW
D:\SYSTEM\OPL\PIQInfo.mbm
E:\SYSTEM\OPL\PIQInfo.mbmW
E:\SYSTEM\OPL\PIQInfo.mbm
C:\SYSTEM\APPS\
.aifKW
C:\SYSTEM\APPS\
.mbmK
D:\SYSTEM\APPS\
.aifKW
D:\SYSTEM\APPS\
.mbmK
E:\SYSTEM\APPS\
.aifKW
E:\SYSTEM\APPS\
.mbmK
& Pocket IQK
OxO,O
SHOWSPLASH
SPLASHID&
APPTITLE$
APPVER$
APPYEAR$
APPAUTHOR$
APPEMAIL$
C:\SYSTEM\OPL\PIQInfo.opoW
C:\SYSTEM\OPL\PIQInfo.opo
D:\SYSTEM\OPL\PIQInfo.opoW
D:\SYSTEM\OPL\PIQInfo.opo
E:\SYSTEM\OPL\PIQInfo.opoW
E:\SYSTEM\OPL\PIQInfo.opo
About
+ version K
Copyright (C)
& Pocket IQKO
http://www.pocketIQ.comO
FINDOPO$
ABOUTPALM
pscape.opoO
+'Sorry, an unexpected error has occured.
Please E-mail me at:
andK
++tell me the exact circumstances and the key
presses that led to this error.
++I will also need the following information:
- W
- W
ContinueO
.dbf select nextval from K
SEQ&!
SEQ&%
ALERT_INFO
ErrorO
HTMLC[
<TITLE>
</TITLE>K
HTMLC[
<IMG SRC="
HTMLC[3
HTMLC[
</i>K
HTMLC[
</b>K
HTMLC[
HTMLC[!
<center>
K+ </center>K
CollectionC[
Cabinet Suite
Registering
+:Type in the name that you have registered and the key that
+c<i>This page was last updated by <a href="mailto:Pythia@Palmscape.com">Marc de Oliveira</a> on </i>
INITSTRING$'
HEADSTRING$'
HEADGRAPHIC$'
DEFAULTFILE$'
Default
CREATEDB
DBASE[
?<0tw
"DATA.APP
Table1
ColA1
ColB1
ColA2
ColB2
ColA3
ColB3
ColA4
ColB4
Index1
ColA2
jjvpjf>
jU:Compiled for PSIONtm Series 5 by Igor Akaev (akaev@aha.ru)
"Copyright information"LCopyright
1995, 1996 Kevin Werbach. Noncommercial redistribution permitted.bThis Guide is not a product of Bare Bones Software; the similarity of names is purely coincidental
BASIC ELEMENTS <BODY></BODY> (bulk of the page)
Document Type
BASIC ELEMENTS)<HTML></HTML> (beginning and end of file)
Header
BASIC ELEMENTS/<HEAD></HEAD> (descriptive info, such as title)
Title
BASIC ELEMENTS"<TITLE></TITLE>(must be in header)U
Active Link
Bkgrounds & Colors
<BODY ALINK="#$$$$$$">8(More info at http://werbach.com/web/wwwhelp.html#color)U
Bkground Color
Bkgrounds & Colors
<BODY BGCOLOR="#$$$$$$">
(order is red/green/blue)
Link Color
Bkgrounds & Colors
<BODY LINK="#$$$$$$">
Text Color
Bkgrounds & Colors
<BODY TEXT="#$$$$$$">
Tiled Bkground
Bkgrounds & Colors
<BODY BACKGROUND="URL">
Visited Link
Bkgrounds & Colors
<BODY VLINK="#$$$$$$">
Align Text
Dividers
<P ALIGN=LEFT|CENTER|RIGHT></P>
Clear Textwrap
Dividers
<BR CLEAR=LEFT|RIGHT|ALL>
Horizontal Rule
Dividers
Horizontal Rule Alignment
Dividers
<HR ALIGN=LEFT|RIGHT|CENTER>
Line Break
Dividers
<BR> (a single carriage return)
zx~XR
No Break
Dividers
<NOBR></NOBR>
N1.0 (prevents line breaks)U Paragraph
Dividers
<P></P>
(closing tag often unnecessary)U
Solid Line
Dividers
<HR NOSHADE>
(without the 3D cutout look)
Thickness
Dividers
<HR SIZE=?> (in pixels)
Width
Dividers
<HR WIDTH=?> (in pixels)U
Width Percent
Dividers.<HR WIDTH="%"> (as a percentage of page width)
N1.0U
Word Break
Dividers
<WBR>&N1.0 (where to break a line if needed)U
Base Font Size
Formatting*<BASEFONT SIZE=?> (from 1-7; default is 3)
N1.0U
Blinking
Formatting
<BLINK></BLINK> N1.0 (the most derided tag ever)
Formatting
<B></B>U
Center
Formatting
<CENTER></CENTER>
(for both text and images)
Change Font Size
Formatting
<FONT SIZE="+|-?"></FONT>U
Column Gutter
Formatting5<MULTICOL GUTTER=?></MULTICOL> (default is 10 pixels)
If you tick the Raw Convertion checkbox the Source File is also converted into an HTML file containing Document Title, Document Headline and Made By as described previously in the Standard Convert section.
Everything else is rewritten in the HTML File as it was in the Source File with the only exception that all ocurences of chr(10) are converted to <P>.
This convertion is good for long raw text documents that you just want to add to your home page without adding too much formatting.
This section describes how the HTML Converter is intended to be used.
1.1 The Idea
The idea behind the HTML Converter is that you should be able to make consistent and nice looking web pages while confronted with as little HTML code as possible.
The aim is to be able to maintain the text of your web pages in simple ascii format without having to see all of the HTML code.
1.2 The Files
Your web files are divided into two categories:
1) The Source Files. These are the ascii text files you will create and maintain (with a minimum of HTML coding).
2) The Destination files. These are the HTML files you will upload to your web server.
These two categories are held in seperate directories making it simpe to distinguish between files that should be uploaded and the Source files.
Each Source file is converted to a destination file in HTML format but you can have more destination files than Source files.
All graphic files, files for download etc are placed together with the destination files.
1.3 Usage
To make a destination HTML file do the following:
1) Make directories for your Source files and your destination files (using the Shift-Ctrl-N on tthe system screen)
2) Start the HTML Converter
3) Setup a HTML Converter Style (see section 2)
4) Open the Convert dialog (Press Enter or click the Conv button)
5) Enter the name of the source file you want to convert in the File Name field
6) Edit the Source file by pressing the Edit button (if the file does not exist it will be created for you0
7) Save the Source File (from the editor, Ctrl-S)
8) Convert the Source File to a HTML file by pressing the Convert button
9) Now, the generated file is automatically launched in the web browser (proviided that you have installed it)
5. Contacting PocketIQ5
6. How to register5
PocketIQ can be contacted in a number of ways, for either support or registering your software.
Internet:
http://www.PocketIQ.com
Telephone / Fax:
+44 (0)1234 353970
Email:
Pythia@PocketIQ.com
support@PocketIQ.com
Post:
44 Harpur Street
Bedford
Bedfordshire
MK40 2QT
England
Registered users of HTML Converter are entitled to receive free upgrades via the internet or on floppy disk, as they become available.
For details on how to get latest version see "Contacting PocketIQ". If you do not have access to the internet send a stamped addressed envelope with a PC formatted floppy disk to the address shown.
Please note that the free upgrades offer excludes postage fees & hardware costs.
The Pocket IQ End User Licence Agreement (EULA) is a legal agreement between you and Pocket IQ Limited. By downloading or installing this SOFTWARE, you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, remove this SOFTWARE immediately.
Pocket IQ END USER LICENCE AGREEMENT (EULA)
This licence refers to any product which is distributed by Pocket IQ.
GRANT OF LICENCE
This Pocket IQ Licence Agreement ("Licence") permits you to use one copy of this product, on multiple machines which may include user documentation provided in electronic form ("SOFTWARE"), providing it is for the sole, exclusive use of the registered user. The SOFTWARE is licensed as a single product. Its component parts may not be separated for use on more than one computer or by more than one user at any one time.
COPYRIGHT
The SOFTWARE (including any images and text incorporated into the product) is owned by Pocket IQ and the independent application author, or its suppliers and is protected by English copyright laws and international treaty provisions.
REVERSE TRANSLATION
The SOFTWARE, including all related program files may not be altered in any way. Reverse Translation is expressly forbidden without written permission of the Pocket IQ and the independent application author.
LIMITED WARRANTY
To the maximum extent permitted by applicable law, Pocket IQ and the independent application author disclaims all warranties, either express or implied, including but not limited to warranties of merchantability and fitness for a particular purpose. In no event shall Pocket IQ, the independent application author or its suppliers be liable for any damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business information, or other pecuniary loss) arising out of the use or inability to use this Pocket IQ product.
The SOFTWARE is supplied 'as is' and no advice or technical support is guaranteed from Pocket IQ or any third party.
0. HTML ConverterE
1999-2000 Marc de Oliveira & PocketIQ
Internet: http://www.PocketIQ.com
E-mail: Pythia@PocketIQ.com
The following section describes how to setup the HTML Converter.
2.1 Document Style
The HTML Converter supports multible setup definitions. If you are managing different home pages with different look and feel you can define a seperate setup for each home page.
The Document Style field is used to distinguish between your setup definitions.
You can either select a setup definition by pressing the Left and Right keys (or Left and Right arrow icons), or you can create a new Document Style from the Style dialog (Shift-Ctrl-S or click the Style button on the toolbar).
You can edit the current Document Style by pressing the Space bar (you can also access the current Document Style by clicking the Curr button on the toolbar or the Edit button on the Style dialog).
2.2 From Dir
This field holds the path to the source files of the current Document Style.
This is where your simple text files are stored.
The From File field is saved as part of the setup for that specific Document Type.
2.3 To Dir
This field holds the path to your destination files.
This is where the converted HTML-files are placed by the program.
The To File field is saved as part of the setup for that specific Document Type.
2.4 Made By
The content of this field will be added to the bottom of each file during convertion followed by the curent date.
This field should include something like:
<I>Last updated by <A HREF="mailto:[YOUR E-MAIL]">[YOUR NAME]</A> on</I>
but you can also include anything else that you want to place at the end of each page.
The Made By field is saved as part of the setup for that specific Document Type.
2.5 Horisontal Ruler
The content of this field is always inserted on the following places on every HTML document:
1) after the Page Heading
2) at the end of the page (just before the contents of the Made By field)
3) everywhere the keyword <HR> is found in the Source Document
The field will usually contain something like:
<CENTER><IMG SRC="hr.gif"></CENTER>
The Horisontal Ruler field is saved as part of the setup for that specific Document Type.
2.6 Init String
The content of this field is inserted at the begining of every HTML document.
Here you can specify the initialization string of the HTML page (background graphic,
The content of this field is inserted at the begining of every HTML document.
The field will usually contain something like:
<IMG SRC="head.gif">
If this field is blank the Document Title will be shown at the top of the HTML document instead of the graphic.
If you do not want any heading (neither title nor graphic) set this field to
<REM>
or something else that will not be shown on the page.
The Head Graphic field is saved as part of the setup for that specific Document Type.
2.9 Defalut File Name
This field holds the name of the file that you will usually want to work with (without path or extention).
The Default File Name is saved as part of the setup for that specific Document Type.
Pocket IQ applications can be registered exclusively through Palmscape, the leading online store for the EPOC platform.
To register this product simply visit the Pocket IQ internet site and follow the registration instructions.
Alternatively you can register directly with Palmscape in any of the following ways:
Online Orders:
Purchase online via Palmscape's secure online service. Simply visit www.palmscape.com, and select the "Buy now" link. Palmscape accept most major credit cards (see below).
Telephone \ Fax orders:
Palmscape accept telephone orders via the United Kingdom office which can be reached on +44 (0)1234 353970.
Postal Orders:
Payment can be made by UK Cheque, Cash or Credit Card direct to the Palmscape office, located at:
44 Harpur Street
Bedford
Bedfordshire
MK40 2QT
England.
Please mark clearly that you wish to purchase this application.
Payment types:
Palmscape accept major Credit cards, Switch, Delta as well as UK Cheque, Eurocheque and Cash. If you are paying in any currency other than GB Pounds please add 10% to cover conversion fees.
To convert a simple text document to an advanced HTML document you must open the Convert File dialog using Shift-Ctrl-C (you can also press Enter or click the Conv toolbar button).
The Convert button on the Convert File dialog will convert the text file to HTML. If the Raw Convertion field is not tagged the convertion will be a Standard Convertion. If the field is tagged the convertion will be a Raw Convertion (the raw convertion is described in the next section).
When the Convert button is pressed the text file
<From Dir>\<File Name>.txt
is converted to the following HTML file:
<To Dir>\<File Name>.htm
if the Default checkbox is checked a file named "default.html" will be generated instead.
You can change the name of the default file from the Preference screen (Ctrl-K).
The convertion follows the following structure:
3.1 Document Title
The first line of the Source File is interpreted as the Document Title.
The Document Title is specified in the heading of the HTML document.
If the Head Graphic field is empty the Docuemnt Title is also added as a Headline (<H1>) with a link to the page "default.html" at the top of the document body.
3.1.2 Document Headline
The second line of the Source File is interpreted as the Docuemnt Headline.
The Document Headline is placed on the top of the HTML body (after the Head Graphic, if there is one).
3.1.3 Other Headlines
You can define headlines in the Source File by adding blank lines.
Blank lines are interpreted in the following way:
1 blank line converts the following line to a bold line (<B>).
2 blank lines converts the following line to a level 3 heading (<H3>)
3 blank lines converts the following line to a level 2 heading (<H2>)
4 blank lines converts the following line to a level 1 heading (<H1>)
This text:
"This is some text.
This is coverted to bold
While this will remain normal text."
will be converted to this:
"This is some text.
This is coverted to bold
While this will remain normal text."
3.1.4 Tables
You can specify simple tables in the Source File by using the keyword <MDOTAB> in the following way:
"<MDOTAB>"
<No Of Rows> <No Of Columns> <Border Width>
<Cell 1>
<Cell 2>
<Cell 3>
...
To make a table containing translations (three rows, to columns) you could do this:
<MDOTAB>
3 2 10
English
Danish
House
Hus
Wine
Vin
The above section will be converted to the following HTML code:
<table width=10>
<tr><td>English</td><td>Danish</td></tr>
<tr><td>House</td><td>Hus</td></tr>
<tr><td>Wine</td><td>Vin</td></tr>
</table>
3.1.5 Lines
Each line in the Source file will be implemented as a paragraph in the converted HTML file (<P>).
As the converter can only read 250 characters of a line, longer paragrahs must be made using the ">" token.
A line beginning with the ">" token is interpreted as the continuation of the previous line (ie there will not be added a <P> keyword to that line).
These two lines
>will be interpreted as one paragraph.
But these two lines
will be interpreted as two paragraphs.
3.1.6 Lists
Lists are specified using indentation.
If you add a space charater at the begining of a line, that line will be converted to a bullet in an unnumbered list (<UL>).
The following lines will be added to that bullet.
All succeeding lines begining with a space character will be added as succeeding bullets to the list.
To make sub lists you just increse the number of space characters in the begining of the lines.
Note 1: You can only change one level at a time (you cannot go from level
3 directly to level 1).
Note 2: To end the list you have to use the </UL> token (must be in upper case) on a seperate line.
If you do not remember this the rest of the text will be inserted under the last bullet point of the list.
RHTML Converter 1.3 for the Psion Series 5 and 5mx (C) Marc de Oliveira & PocketIQ 1999-2000
1) Execute the HTMLConv.sis file on your pc or Psion.
2) Choose C or D drive for the installation (make sure that there is enought disk space).
3) The program will install itself.
Installation from ZIP file:
1) Make sure the \System folder is shown on your Series 5 system screen. If it's not, enable it in the 'Preferences' dialogue.
2) Using PsiWin copy the files PYTHIA.OPO, PIQInfo.OPO, PIQInfo.RSC and PIQInfo.MBM to the folder \system\opl (you might have to create the folder)
3) Go into \System\Apps on C: or D: and make a new folder called "HTMLConv"
4) Using PsiWin, copy the following files to the new \System\Apps\HTMLConv folder:
HTMLConv.app
HTMLConv.aif
HTMLConv.mbm
HTMLConv.hlp
HTMLCrea.opo
4) Copy the files systinfo.opx and sysram1.opx in the folder \system\opx
5) A new icon should appear on your Extras bar
Problems
--------
1. Read only files
Some times files become read only while being installed. None of the files should be read only. If you get any errors like the program is unable to write information to your Psion go through the program files to see if some of them are read only.
In the system-view you can open the file property window by selecting (highlighting) a file and pressing Ctrl-P. In the property window you can see and set/clear the read only checkbox.
2. Copying between C and D
Be very careful when you move or copy applications between the C and D drives. It seems that the Psion is not correctly updated when applicaions are copied from C to D or vice versa.
Always delete the application directory from one drive before reinstalling on the other drive.
3. Low on battery
When starting up this program for the first time a lot of writing is done to the disk. If your machine is low on battery these writes can go wrong and turn the application files bad. This should only be an issue when running the application the first time.
4. Not enough memory
This program needs up to 300 Kb of free memory on the C drive. If you try to run the program with less than 300 Kb of free memory on the C drive it may not behave as expected.
Usage:
------
Press Ctrl+Shift+H to see help file.
Bugs:
-----
- When opening the same HTML file twice with the Web Browser it might be cashed and, hence, not automatically reloaded. To reload the file press Ctrl-R.
Registering:
------------
Registering the program will give you the following benefits:
1) The register window will not pop up on startup
2) You get free support via e-mail (Pythia@PocketIQ.com)
3) Your suggestions to new functionalities will be implemented (as far as resources permits it)
How to register
Go to the PocketIQ home page at:
http://www.PocketIQ.com
Here you can register using credit card or cheque.
After receiving your registering fee I will mail you a Key that you can use to register the program.
Made by:
--------
Marc de Oliveira
for Pythia Information & PocketIQ
Web: http://www.PocketIQ.com
E-mail: Pythia@PocketIQ.com
History:
--------
1999.08.14: Version 1.0
1999.08.29: Version 1.0.1
- Installation bug fixed
1999.09.11: Version 1.1.4
- Source files can now be selected for editing or convertion from a pop-list.
- The name of the default file can now be defined as a preference (Ctrl-K).
- The delay needed when starting up the web browser can be setup in the preference screen (default is 120).
- When opening a HTML document in the web browser a reload is made to prevent a previously cached version to be displayed.
- Bug fix: Last character is duplicated.
- Bug fix: Using a source folder with no .TXT files gave an error.
2000.01.20: Version 1.2
- Released through PocketIQ.
- Graphics are adjusted to the current screen size, so that it should work on any EPOC machine.
- After agreement with Igor Akaev the HTML.S5 help file is shipped with HTML Converter. You can open the file by pressing Shift-Ctrl-I.
2000.04.06: Version 1.2.1
- A new preference lets you set up your default converter (Standard or Raw).
2000.05.01: Version 1.2.2
- The maksimum size of Ascii source files is increased from 2Kb to 10Kb.
2000.07.31: Version 1.3
- "Editor" by Symbian is integrated in HTML Converter as the editor for maintaining text files. This removes the size restriction of text files and adds features like search, zoom etc.
Courier
Courier
Courier
Courier
7. FREE Upgrades !5
8. Licence agreement5
2. Style SetupE
3. Standard ConvertionE
4. Raw ConvertionE
1. General UsageE
9. Readme.txt5
Sketch
jffVUU
ffUUef
kffVUU
&Paint.app
?"HTMLConv"HTMLConv
!D:\programs\HTMLConv\HTMLConv.opl
TBARLINK
Z:\SYSTEM\OPL\TOOLBAR.OPO
MainO
APPTITLE$
APPVER$
APPEMAIL$
APPYEAR$
APPAUTHOR$
REG_KEY$
REG_NAME$
SHOW_ETYPE$
SHOW_ETYPE%
TOOLBAR%
G_FIND$
CONTROL%
SHIFT%
FALSE
MINIT%
MAINSCN%
SCREEN%
SCREENX%
SCREENY%
SCREENW%
SCREENH%
ALIGNMENT%
ICON$
PATH$
DATA$
THREAD&
HTMLTHREAD&
EDITORTHREAD&
UPID&
DOWNID&
SLIDERID&
FINDID&
HELPID&
GENID&
INVID&
CUSTID&
7 LEFTICON&
RIGHTICON&
LEFTWIN%
C RIGHTWIN%
CU_INV$
CU_ELEMTYPE%
S CU_GROUP$
CU_CUSTOMER$
DOCDIR$
p APPSHORT$
PBUFFADDR&
PLEN&
PTEXT&
DEFAULTFILENAME$
BROWSERDELAY$
TEMP1$
TEMP2$
BYTECOUNT&
FILEHANDLE%
BYTE%
ITED&
JTED%
DEFAULTCONVERTER$
SCREENHEIGHT%
SCREENWIDTH%
SPLASHID&
SPLASHXPOS%
SPLASHYPOS%
SHOWSPLASH
EVENT
HTML Converter
HTMLConv
Marc de Oliveira
+ 1999-2000
Pythia@PocketIQ.com
Starting up
c:\system\opl\pythia.opoW
c:\system\opl\pythia.opo
d:\system\opl\pythia.opoW
d:\system\opl\pythia.opo
+(Could not find PYTHIA.OPO in \system\opl
EVENT
BACKGROUND
FOREGROUND
PROCESS
ERROR_HANDLER
SHIFT%
CONTROL%
APPTITLE$
APPVER$
APPEMAIL$
TBAROFFER%
POINTER_EVENT
GOTOEND
GOTOBEGIN
GOTONEXT
GOTOPREVIOUS
DISPLAY_MENU
ACTION_KEY
SHIFT%
CONTROL%
@B` s
{A`[n
'{A[$
Cut/Copy/Paste unsupported
InfraRed unsupported
Zoom in unsupported
Zoom out unsupported
'{A`[
APPTITLE$
MINIT%
CONTROL%
Setup+
NewON+
RegisterOR+
CloseOe
Tools+
Edit stylesOS+
Convert to HTMLOC+
PreferencesOkh+
About
HTML Converter HelpOH+ HTML HelpOI
W:O`L{
ABOUT
DOCONVERT
HTMLHELP
PREFERENCES
REREGISTER
DOEDIT
TOOLSWITCH
ALERT_OK$
INSTRUCTIONS
ALERT_INFO
REG_KEY$
SHIFT%
CONTROL%
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
O`L{A[
0123456789
O`L{A[
O`L{A[
Shift+
O {A[
WarningO
The Style '+
NAME$#
' will be deleted.KO
O {A[g
InformationO
+2There is no HTML style to edit. Please, create oneO
K+-' does not exist. Press OK to create the fileKO
TODIR$#
TODIR$#
+ Not foundO
The file '
K+-' does not exist. Press OK to create the fileKO
OPENFILE%
WRITELINE
READLINE$
MAKETABLE$
DATESTR$
ALERT_OK$
RUNAPPLICATION&
SENDSTRING
SENDTOKEN
DEFAULTFILENAME$
BROWSERDELAY$
Generating '
'...K
<HTML>O
<HEAD>O
<EOF>G[
<TITLE>
</TITLE>
HEADSTRING$#
</HEAD>O
<BODY>O
INITSTRING$#
HEADGRAPHIC$#
<CENTER><H1><A HREF="
</A></H1></CENTER>
<CENTER>
+ </CENTER>
HEADGRAPHIC$#
<CENTER><H2>
</H2></CENTER>
<EOF>G
<P><EOF>G\[_
</UL>C[
<MDOTAB>C[
<H3>K
</H3>
<H2>K
</H2>
<H1>K
</H1>
<UL><LI>
+ </UL><LI>
MADEBY$#
<I>KW
</I>KO
</BODY>O
</HTML>O
Convertion CompletedO
" has been made. It will now be opened using the Web Browser. If the page is not loaded the first time the browser is activated try increasing the Browser Delay on the Preferences screen.KO
{=\[.
BrowserO
TODIR$#
file:///
file:///+
TODIR$#
EnterO
{OR{c
Canceled
READTOKEN$
READLINE$
WRITELINE
<TABLE BORDER=
<EOF>G\[
<TR VALIGN=TOP>O
<EOF>G\[g
<TD ALIGN=LEFT>
</TD>
</TR>O
</TABLE>O
OPENFILE%
WRITELINE
READLINE$
DATESTR$
DEFAULTFILENAME$
Raw Converting...
<HTML>O
<HEAD>O
<EOF>G[
<TITLE>
</TITLE>
HEADSTRING$#
</HEAD>O
<BODY>O
INITSTRING$#
HEADGRAPHIC$#
<CENTER><H1><A HREF="
</A></H1></CENTER>
<CENTER>+
HEADGRAPHIC$#
K+ </CENTER>KO
<CENTER><H2>
</H2></CENTER>
MADEBY$#
<I>KW
</I>KO
</BODY>O
</HTML>O
INSTRUCTIONS
Jump to first Style
INSTRUCTIONS
Jump to last Style
INSTRUCTIONS
Jump to first Style
INSTRUCTIONS
Jump to last Style
RUNAPPLICATION&
EDITORTHREAD&
EditorO
DEFAULTCONVERTER$
DEFAULTFILENAME$
BROWSERDELAY$
HTML Converter preferences
Default File Name
Browser Delay
Default Converter+
Standard,Raw
SaveOs+
CloseO
W7Os@[
START6
MAIN{
PROCESS'
DISPLAY_MENU
ACTION_KEY
PRINTKEY
EVENT
LOAD_INI_FILE
SAVE_INI_FILE
REREGISTER
TJEKREGISTRATION*
SETUP_TOOLBAR
CMDA%=
CMDB%m
CMDC%
CMDD%
POINTER_EVENT
TOOLSWITCH
SETUP_SCREEN
TOOLBARTITLE
BACKGROUNDk#
FOREGROUND~#
HTMLHELPJ$
INSTRUCTIONS]%
DEVICE
DOEDITr(
DOCONVERTd.
CONVERT
MAKETABLE$
RAWCONVERTd=
GOTONEXT5A
GOTOPREVIOUSzA
GOTOBEGIN
GOTOEND
EDITORMAINAB
PREFERENCES
SYSTEM\
SYSRAM1
Thank you for trying this program.
This application, including all related program files
may not be altered in any way. Reverse Translation
is expressly forbidden without written permission of
the author.
Registered users may install the software on an
unlimited number of machines so long as they are
for their own use exclusively.
Although this application is shareware, you are
encouraged to pass the distribution file to your
friends and colleague, registered copies may not
be lent, sold or rented without the express written
permission of the author.
PocketIQ and Pythia Information cannot and does
not accept any liability for loss caused by error,
defect or failure of the software including any loss
of any kind.
No guarantee is either offered or implied by
PocketIQ or Pythia Information. Use of this software
is entirely at your own risk.
If you cannot accept these conditions, please, press