home *** CD-ROM | disk | FTP | other *** search
-
- PRESCHOOL PACK INSTALLATION INSTRUCTIONS
- Make a directory on your hard drive for Preschool Pack, then change to
- that directory. The PPK files are compressed into the two files PPK1.EXE
- and PPK2.EXE. These files will be found on 2 disks in the 5 1/4" version,
- or may be on a single disk if using 3 1/2" disks. The required files are
- then extracted by typing PPK1 and PPK2. This may sound complicated, but
- really isn't. At the DOS prompt, type the following commands, pressing
- ENTER after each command. The information in ()'s should not be typed.
-
- MD \PPK
- CD \PPK
- (Insert disk1) A:PPK1
- (Insert disk2, if using 2 disks) A:PPK2
-
- You must run PPK2 whether you are installing from 1 or 2 disks. If you
- have 2 PPK disks, insert the second disk before running PPK2, otherwise
- just leave the single disk in the drive. PPK may be installed from any
- drive. If installing from a drive other than A, substitute that drive
- letter where you see A: above. Run Preschool Pack by typing PPK from
- the Preschool Pack directory. Please take a few minutes to read the brief
- program documentation found in the file PPK.DOC. This file may be printed
- by typing: COPY PPK.DOC PRN
-