Usenet 1994 January

home *** CD-ROM | disk | FTP | other *** search

/ Usenet 1994 January / usenetsourcesnewsgroupsinfomagicjanuary1994.iso / sources / unix / volume14 / vplot / part13 < prev next >

Wrap

Internet Message Format | 1988-03-31 | 54.9 KB

Subject: v14i018: Device-independant graphics system, with drivers Newsgroups: comp.sources.unix Sender: sources Approved: rsalz@uunet.UU.NET Submitted-by: Joe Dellinger <joe@hanauma.STANFORD.EDU> Posting-number: Volume 14, Issue 18 Archive-name: vplot/part13 #! /bin/sh # This is a shell archive. Remove anything before this line, then unpack # it by saving it into a file and typing "sh file". To overwrite existing # files, type "sh file -c". You can also feed this as standard input via # unshar, or by typing "sh <file", e.g.. If this archive is complete, you # will see the following message at the end: # "End of archive 13 (of 24)." # Wrapped by rsalz@fig.bbn.com on Fri Mar 25 11:47:20 1988 PATH=/bin:/usr/bin:/usr/ucb ; export PATH if test -f 'Imagen_device/imaglib/imagopen.c' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'Imagen_device/imaglib/imagopen.c'\" else echo shar: Extracting \"'Imagen_device/imaglib/imagopen.c'\" $5164 characters$ sed "s/^X//" >'Imagen_device/imaglib/imagopen.c' <<'END_OF_FILE' X/* X * Copyright 1987 the Board of Trustees of the Leland Stanford Junior X * University. Official permission to use this software is included in X * the documentation. It authorizes you to use this file for any X * non-commercial purpose, provided that this copyright notice is not X * removed and that any modifications made to this file are commented X * and dated in the style of my example below. X */ X X/* X * X * source file: ./filters/imaglib/imagopen.c X * X * Joe Dellinger (SEP), June 11 1987 X * Inserted this sample edit history entry. X * Please log any further modifications made to this file: X * Stew Levin (SEP), July 2, 1987 X * Added ncopies= command line option. X */ X X/* X * get Imagen specific parameters and go X */ X#include <stdio.h> X#include "../include/err.h" X#include "../include/enum.h" X#include "../include/extern.h" X#include "../include/params.h" X X#define BRUTE_DEFAULT YES X X#ifdef SEP X#define GETPAR fetch X#else X#define GETPAR getpar X#endif X int file_created = NO; int stripped = NO; int tex = NO; int brute_force = BRUTE_DEFAULT; int ncopies_document = 1; char label[100]; char string[80]; X char mapfile[100] = "default"; char holdreason[100]; char scratch_file[100]; X X/* X * The option "strip=y" was created for use with TEX, allowing plots X * to be included with text. The output is not indented, does not have X * any job control information at the start, has no erases, no "end of X * form" marker at the end, and does not attempt to put in a label. X * The option "tex=y" does everything that strip does but also rotates X * the coordinates (as appropriate for dviimp), and saves and restores X * all settings. "hold=reason" to insert document control to tell the X * imagen not to print the job until a "release jobs" (rj) is issued X * at the imagen control console. This makes it easier to insert X * special paper for example. X */ X imagopen () X{ char name[50]; char date[50]; X X/* X * physical device parameters X */ X dev_xmin = 45; X dev_ymin = 90; X pixels_per_inch = 300.; X aspect_ratio = 1.0; X X/* X * device capabilities X */ X need_end_erase = YES; X buffer_output = YES; X smart_clip = NO; X num_col = 0; X mono = 1; X dither = 3; X pixc = 0.6; X greyc = -0.5; X X/* Since this is a hard copy device, might as well use a nice font */ X txfont = DEFAULT_HARDCOPY_FONT; X txprec = DEFAULT_HARDCOPY_PREC; X X if (!GETPAR ("label", "s", label)) X { X getname (name); X getdate (date); X sprintf (label, "%s, %s", name, date); X } X else X { X if ((strcmp (label, "no") == 0) || (strcmp (label, "n") == 0) X || (strcmp (label, " ") == 0) || (strcmp (label, "") == 0)) X label[0] = '\0'; X } X X if (isatty (fileno (pltout))) X { X file_created = YES; X sprintf (scratch_file, "%s%s", IPEN_SPOOL, "/Impress_XXXXXX"); X mktemp (scratch_file); X pltout = fopen (scratch_file, "w"); X if (pltout == NULL) X { X ERR (FATAL, name, "could not open scratch file %s!", X scratch_file); X } X } X X if (GETPAR ("paper", "s", string)) X { X if (strcmp (string, "legal") == 0) X { X dev_xmax = 4032 - 20; X dev_ymax = 2416 - 1; X } X else X if (strcmp (string, "letter") == 0) X { X dev_xmax = 3296 - 20; X dev_ymax = 2416 - 1; X } X else X { X ERR (FATAL, name, "don't recognize paper type %s!", string); X } X } X else X { X /* letter */ X dev_xmax = 3296 - 20; X dev_ymax = 2416 - 1; X } X X if (GETPAR ("tex", "s", string)) X { X if ((string[0] == 'y') || (string[0] == 'Y')) X stripped = YES; X } X else X if (GETPAR ("strip", "s", string)) X { X if ((string[0] == 'y') || (string[0] == 'Y')) X stripped = YES; X } X X if (stripped == YES) X { X /* Don't leave space at edge of plot */ X dev_xmax -= dev_xmin; X dev_xmin = 0; X/* X * Make plotting surface big enough that no matter which way they X * may use the plot, nothing will be clipped. The imagen is SUPPOSED X * to be able to handle stuff going off the page anyway. X */ X dev_ymax = dev_xmax; X dev_ymin = dev_xmin; X X /* TEX shifts plot 1 inch to the right; undo this */ X dev_xmax -= 300; X dev_xmin -= 300; X X /* Turn off label */ X label[0] = '\0'; X } X else X { X if (GETPAR ("brute", "s", string)) X { X if ((string[0] == 'n') || (string[0] == 'N')) X brute_force = NO; X else X brute_force = YES; X } X } X X if (!GETPAR ("hold", "s", holdreason)) X { X holdreason[0] = '\0'; X } X X if (!GETPAR ("ncopies copies", "i", &ncopies_document)) X { X ncopies_document = 1; X } X X epause = 0; X endpause = NO; X size = ABSOLUTE; X} X X X/* X * get the login name of the person running the program. X */ getname (name) X char *name; X{ char line[100]; int i; X getpw (getuid (), line); X i = 0; X while ((name[i] = line[i]) != ':') X i++; X name[i] = '\0'; X} X X/* X * get the date X */ X#include <sys/time.h> getdate (date) X char *date; X{ long time (); long clock; struct tm *localtime (); char *asctime (); X X clock = time (0); X sprintf (date, "%.16s", asctime (localtime (&clock))); X} END_OF_FILE if test 5164 -ne `wc -c <'Imagen_device/imaglib/imagopen.c'`; then echo shar: \"'Imagen_device/imaglib/imagopen.c'\" unpacked with wrong size! fi # end of 'Imagen_device/imaglib/imagopen.c' fi if test -f 'Imagen_device/imaglib/ipen.mn' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'Imagen_device/imaglib/ipen.mn'\" else echo shar: Extracting \"'Imagen_device/imaglib/ipen.mn'\" $5710 characters$ sed "s/^X//" >'Imagen_device/imaglib/ipen.mn' <<'END_OF_FILE' X.TH Ipen 9 "April 6 1986" X.SH NAME ipen \- VPLOT filter for Imagen X.PP X.SH SYNOPSIS ipen plot_file1 [plot_file2 ...] [options] X.PP Seplib version: Ipen < Plot1.h [Plot2.h ...] [options] X.PP X.SH DESCRIPTION All X.B pen filters accept input in the X.B vplot graphical metalanguage, and either cause a plot to appear on a device or write a file which if sent to that device will create a plot. X.B Ipen is the filter for the Imagen 8/300 laser printer. It translates from vplot to the imPRESS language understood by the printer. If called without redirected output, it creates a temporary file with a unique name, spools the plot, and removes the temporary file upon exiting. The location and name of the temporary file are set when ipen is compiled, by editing an include file. If the output is redirected, the imPRESS output is written to standard out (or to out= for Seplib) and no spooling is done. X.PP X.SH OPTIONS X.PP Only Imagen-specific options are covered here. For a list of all generic pen options, which also apply to ipen, do ``man 9 pen''. X.PP X.TP X.B paper=letter Paper size. Paper=legal is also possible. X.PP X.TP X.B label=string By default, plots are labeled with the username of the person making the plot and the time and date. This can be replaced with some other label by using this option. The label may obscure part of the plot, as it whites out a rectangle in the area it will occupy before writing text over it. X.B label=``'' or X.B label=no turns off the label and the white-out rectangle. X.PP X.TP X.B strip=no tex=no If strip=y, then the output imPRESS file has no label or document control language prepended, and additional imPRESS commands to save and restore the Imagen state are prepended and appended to the file. This makes the output imPRESS file useful for inclusion into a paper via the `plot' macro of TeX. This allows your figures and text to come out of the machine together, and eliminates cutting and pasting. X(TeX is a typesetting language similar to, but newer than, troff. Troff can also be used in a similar manner, but nobody has bothered to figure out how). X.PP X.TP X.B brute=y The Imagen is quite buggy, and complicated plots will give it a nervous breakdown, which results in it chopping up your plot into little pieces and scattering them through the next person's Imagen output. Imagen seems incapable of fixing this very serious bug. The current version of the Imagen operating system has a special document control language option which turns on a brute-force rasterization technique, which seems to avoid this bug. The X.B brute=y option of ipen turns this on, which also has the effect of slightly slowing down the printing of the plot. It's worth it, though! X.PP X.TP X.B hold=message This parameter tells the Imagen to print the message on the Imagen control console and wait for the ``rj'' (Release Job) command to be issued at the console. Typical usage is hold=``insert transparency''. X.PP X.TP X.B ncopies=1 This parameter is used to save time and effort by printing multiple copies of the plot on the Imagen. X.PP X.TP X.B dither=3 Dithering is a means of representing a continuous-tone grey image on a hardcopy device such as the Imagen. The default dithering method is the minimized average error algorithm. See the Vplotraster manual page for a complete discussion of dithering options. X.PP X.TP X.B greyc=-0.5 This parameter applies only when using dithering as described above. Greyc is discussed in the Pen manual page and more thoroughly in the Vplotraster manual page. To repeat some of the discussion found elsewhere, grey scale reproduction on a hardcopy device is quite different from that on a display device. The transition from black to white occurs more abruptly on a display device, leaving both ends of the grey scale clipped at black or white. This nonlinearity in the perceived grey scale is a useful feature that can be simulated on the Imagen using the greyc parameter. Greyc=-0.5 seems to give grey scale reproduction on the Imagen comparable to many graphics displays, though further experimentation might be required to bring the Imagen output into agreement with a particular device. greyc=1. disables this correction. See the X.B vplotraster manual page for more details. X.PP X.TP X.B pixc=0.6 Pixc also applies only when using dithering as described above. Grey rasters seem significantly darker when plotted on the Imagen than when displayed on a graphics screen. Assuming that this darkening is caused by the overlapping of dots on the Imagen, this parameter compensates for that overlap by shifting the grey color scale toward white. Pixc=0.6 seems to give greyscale reproduction on the Imagen that is comparable to many graphics displays. pixc=1. disables this correction. See the Vplotraster manual page for more details. X.SH SEE ALSO vppen, pen, vplot, vplotraster X.PP X.SH COPYRIGHT The Vplot source is copyrighted. Please read the copyright which can be found in the accompanying Vplot manual page. X.PP X.SH AUTHOR The device-dependent code of Ipen was written by Joe Dellinger, although persons unknown seem to have also made some minor changes to it. Stew Levin has fixed some bugs and added some options. Doug Wilson wrote most of imagpoly.c. X.PP X.SH BUGS The code for ipen is quite complicated, but much of the complexity is to work around various Imagen hardware bugs in software. You should try to draw raster blocks as the first things on the imagen, as the imagen may erase a little beyond the background of the raster block if the overlay mode is ``no''. There's no easy way to correct for this imagen limitation in software. In order to use the brute=y option you have to pay for extra memory on the Imagen. END_OF_FILE if test 5710 -ne `wc -c <'Imagen_device/imaglib/ipen.mn'`; then echo shar: \"'Imagen_device/imaglib/ipen.mn'\" unpacked with wrong size! fi # end of 'Imagen_device/imaglib/ipen.mn' fi if test -f 'Vplot_Kernel/filters/Tests/libvplot_example.c' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'Vplot_Kernel/filters/Tests/libvplot_example.c'\" else echo shar: Extracting \"'Vplot_Kernel/filters/Tests/libvplot_example.c'\" $5043 characters$ sed "s/^X//" >'Vplot_Kernel/filters/Tests/libvplot_example.c' <<'END_OF_FILE' X/* X * Copyright 1987 the Board of Trustees of the Leland Stanford Junior X * University. Official permission to use this software is included in X * the documentation. It authorizes you to use this file for any X * non-commercial purpose, provided that this copyright notice is not X * removed and that any modifications made to this file are commented X * and dated in the style of my example below. X */ X X/* X * X * source file: ./filters/Tests/libvplot_example.c X * X * Joe Dellinger (SEP), June 11 1987 X * Inserted this sample edit history entry. X * Please log any further modifications made to this file: X */ X X#include <math.h> X#include <vplot.h> X#include <stdio.h> X X/* X * Sample program to demonstrate simple libvplot usage. X * Excerpted from 'legend.c', by C. R. Karish: X * format entries for a legend for a geologic map. X * To compile: X * cc -o example vplot_example.c -lvplot -lm X * To run: X * example < infile > outfile X * tube outfile X * Sample input: (remove asterisks) X * unit "Qa" "Quaternary alluvium" X * unit "Tb" "Tertiary basalt" X * unit "Kg" "biotite monzogranite" X * unit "Krp" "rhyolite porphyry" X * unit "Krd" "biotite rhyodacite" X */ X X/* X * external parameters, used by many subroutines X */ float boxsz[2]; /* size of the symbol box, in inches */ float tab[2]; /* locations of tab stops, in inches */ int charsz; /* text size used for explanations (in vplot size X * units) */ float vspace; /* vertical spacing for rock unit entries */ float vpos; /* present location on the page (inches) */ X main () X{ char command[30], line[125], symbol[30], text[90]; int count; X X /* X * set global geometric parameters X */ X X vpos = 10.3; /* start at 10.3 inches from bottom of page */ X vspace = 0.90; /* base line spacing = 0.90 inches */ X charsz = 10; /* default text size = .30 inches */ X boxsz[0] = 1.0; /* default box: 1.0 x 0.70 inches */ X boxsz[1] = 0.70; X tab[0] = 1.0; /* default tabs: 1.0 and 3.5 inches */ X tab[1] = 3.5; X X /* X * set up a vplot output stream and coordinate system X */ X vp_filep (stdout); /* initialize pc structure and open stream */ X vp_style (STANDARD); /* origin at lower left; y axis vertical */ X vp_clip (0., 0., 8.5, 11.0);/* set clipping window */ X /* (wider than screen!) */ X vp_tfont (1, STROKE, 0); /* use Roman simplex, full precision, */ X /* no special overlay processing */ X vp_fat ((int) (charsz / 2));/* set line width, scaled to text size */ X vp_orig (0., 0.); /* set the user origin to coincide with */ X /* the device origin (same as default) */ X X /* X * main loop: read and interpret input file X */ X while (gets (line) != NULL) X { X if (sscanf (line, "%s", command) == 0) /* skip blank lines */ X continue; X if (command[0] == '#') /* ... and comments */ X continue; X if ((count = sscanf (line, /* parse strings from input */ X "%*s \"%[^\"]\" \"%[^\"]\"", symbol, text)) != 2) X { X fprintf (stderr, "unit count = %d\n", count); X fprintf (stderr, "%s\n", line); /* complain if argument */ X continue; /* count is wrong */ X } X mapunit (symbol, text); /* produce some output */ X } /* end of main loop */ X vp_endplot (); /* close output stream */ X} X mapunit (symbol, text) /* produce an entry for a map legend */ X char *symbol, *text; X{ X if (vpos < 1.0) /* leave 1" bottom margin */ X feedpage (); X vpos -= vspace / 2; /* space down a half line */ X if (strcmp (symbol, "nobox")) /* strcmp==TRUE means `no match' */ X { X drawbox (tab[0], vpos); /* draw the box */ X vp_tjust (TH_CENTER, TV_HALF); /* center the symbol in the box */ X vp_fat ((int) ((charsz - 1) / 2)); /* pick a good text fatness */ X vp_text (tab[0] + (boxsz[0] / 2), X vpos, charsz - 1, 0, symbol); /* write the map symbol */ X } X vp_fat ((int) (charsz / 2)); X vp_tjust (TH_LEFT, TV_HALF);/* reset left justification */ X vp_text (tab[1], vpos, charsz, 0, text); /* write the explanation */ X vpos -= vspace / 2; /* space down a half line */ X} X X X/* X * draw a box, boxsz[0] by boxsz[1] inches, left edge at xpos, X * centered vertically at ypos: X */ X drawbox (xpos, ypos) X float xpos, ypos; X{ X vp_fat ((int) (charsz / 2));/* set linewidth, same as for text */ X vp_move (xpos, ypos - (boxsz[1] / 2)); /* move to the upper left X * corner */ X vp_draw (xpos + boxsz[0], ypos - (boxsz[1] / 2)); /* draw it. */ X vp_draw (xpos + boxsz[0], ypos + (boxsz[1] / 2)); X vp_draw (xpos, ypos + (boxsz[1] / 2)); X vp_draw (xpos, ypos - (boxsz[1] / 2)); X} X feedpage () X{ X vp_erase (); /* feed a page, and reset defaults */ X vp_clip (0., 0., 8.0, 11.0);/* reset our clipping window */ X vp_tfont (1, STROKE, 0); /* reset our font */ X vp_fat ((int) (charsz / 2));/* reset our fatness */ X vp_orig (0., 0.); /* reset our origin */ X vpos = 10.3; /* start at the top of the page */ X} END_OF_FILE if test 5043 -ne `wc -c <'Vplot_Kernel/filters/Tests/libvplot_example.c'`; then echo shar: \"'Vplot_Kernel/filters/Tests/libvplot_example.c'\" unpacked with wrong size! fi # end of 'Vplot_Kernel/filters/Tests/libvplot_example.c' fi if test -f 'Vplot_Kernel/filters/genlib/genhatch.c' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'Vplot_Kernel/filters/genlib/genhatch.c'\" else echo shar: Extracting \"'Vplot_Kernel/filters/genlib/genhatch.c'\" $5398 characters$ sed "s/^X//" >'Vplot_Kernel/filters/genlib/genhatch.c' <<'END_OF_FILE' X/* X * Copyright 1987 the Board of Trustees of the Leland Stanford Junior X * University. Official permission to use this software is included in X * the documentation. It authorizes you to use this file for any X * non-commercial purpose, provided that this copyright notice is not X * removed and that any modifications made to this file are commented X * and dated in the style of my example below. X */ X X/* X * X * source file: ./filters/genlib/genhatch.c X * X * Joe Dellinger (SEP), June 11 1987 X * Inserted this sample edit history entry. X * Please log any further modifications made to this file: X * Joe Dellinger, Feb 16 1988 X * Make number of arguments to dev.attributes consistent. X */ X X#include <stdio.h> X#include <math.h> X#include "../include/enum.h" X#include "../include/vertex.h" X#include "../include/params.h" X#include "../include/extern.h" X#include "../include/attrcom.h" X extern int cur_color; extern int need_devcolor; extern char *malloc (); X genhatch (npts, numhatch, angle, hafat, hacol, haoff, hasiz, head) X int npts, numhatch; X struct vertex *head; X float angle; X int *hafat, *hacol, *haoff, *hasiz; X{ register int x, y, i; int xstr, xend, ystr, yend, y1, y2, x1, x2, start; int xa[4], ya[4], xwmin_r, xwmax_r, ywmin_r, ywmax_r; int skip, which_time; int ncross; int vminx, vmaxx, vminy, vmaxy; struct vertex *xhead, *yhead, *v; int *crosses; int cur_color_save; X X cur_color_save = cur_color; X X v = head; X for (i = 0; i < npts; i++) X { X poly_rot (angle, &v->x, &v->y); X v++; X } X X /* X * allocate storage for scan line cross points X */ X crosses = (int *) malloc ((unsigned) npts * sizeof (int)); X X /* X * double link the vertices. (head) is set to the node with the maximum X * x-value so that intersect() will not eliminate 'head' while casting X * off vertices. X */ X vminx = head->x; X vmaxx = head->x; X vminy = head->y; X vmaxy = head->y; X xhead = head; X yhead = head; X X v = head; X for (i = 0; i < npts; i++) X { X if (v->x > vmaxx) X { X vmaxx = v->x; X xhead = v; X } X if (v->y > vmaxy) X { X vmaxy = v->y; X yhead = v; X } X if (v->x < vminx) X vminx = v->x; X if (v->y < vminy) X vminy = v->y; X v++; X } X X/* X * Find a new window which contains the old, rotated window X */ X xwmin_r = xa[0] = xa[1] = xwmin; X xwmax_r = xa[2] = xa[3] = xwmax; X ywmin_r = ya[0] = ya[3] = ywmin; X ywmax_r = ya[1] = ya[2] = ywmax; X for (i = 0; i < 4; i++) X { X poly_rot (angle, &xa[i], &ya[i]); X if (xwmin_r > xa[i]) X xwmin_r = xa[i]; X if (ywmin_r > ya[i]) X ywmin_r = ya[i]; X if (xwmax_r < xa[i]) X xwmax_r = xa[i]; X if (ywmax_r < ya[i]) X ywmax_r = ya[i]; X } X X if (vmaxx > xwmax_r) X vmaxx = xwmax_r; X if (vminx < xwmin_r) X vminx = xwmin_r; X if (vmaxy > ywmax_r) X vmaxy = ywmax_r; X if (vminy < ywmin_r) X vminy = ywmin_r; X X /* stretch polygon in y-direction */ X v = yhead; X do X { X v->y = 2 * (v->y) + 1; X v = v->next; X } while (v != yhead); X X for (which_time = numhatch; which_time < 2 * numhatch; which_time++) X { X if (hasiz[which_time] > 0) X { X if (cur_color != hacol[which_time] || need_devcolor) X { X cur_color = hacol[which_time]; X dev.attributes (SET_COLOR, cur_color, 0, 0, 0); X need_devcolor = NO; X } X X skip = hasiz[which_time]; X start = haoff[which_time] + skip * (int) (vminy / skip); X for (y = start; y <= vmaxy; y += skip) X { X ncross = intersect (2 * y, crosses, yhead, 1); X sort (crosses, ncross); X for (i = 0; i < ncross; i += 2) X { X xstr = crosses[i]; X xend = crosses[i + 1]; X y1 = y2 = y; X poly_rot (-angle, &xstr, &y1); X poly_rot (-angle, &xend, &y2); X dev.vector (xstr, y1, xend, y2, hafat[which_time], 0); X } X } X } X } X /* shrink in y */ X v = yhead; X do X { X v->y = ((v->y - 1) / 2); X v = v->next; X } while (v != yhead); X X /* X * expand in x X */ X v = xhead; X do X { X v->x = 2 * v->x + 1; X v = v->next; X } while (v != xhead); X X for (which_time = 0; which_time < numhatch; which_time++) X { X if (hasiz[which_time] > 1) X { X if (cur_color != hacol[which_time] || need_devcolor) X { X cur_color = hacol[which_time]; X dev.attributes (SET_COLOR, cur_color, 0, 0, 0); X need_devcolor = NO; X } X X skip = hasiz[which_time]; X start = haoff[which_time] + skip * (int) (vminx / skip); X for (x = start; x <= vmaxx; x += skip) X { X ncross = intersect (2 * x, crosses, xhead, 0); X sort (crosses, ncross); X for (i = 0; i < ncross; i += 2) X { X ystr = crosses[i]; X yend = crosses[i + 1]; X x1 = x2 = x; X poly_rot (-angle, &x1, &ystr); X poly_rot (-angle, &x2, ¥d); X dev.vector (x1, ystr, x2, yend, hafat[which_time], 0); X } X } X X } X } X /* X * shrink in x X */ X v = xhead; X do X { X v->x = ((v->x - 1) / 2); X v = v->next; X } while (v != xhead); X X free ((char *) crosses); X X if (cur_color != cur_color_save) X { X cur_color = cur_color_save; X need_devcolor = YES; X } X} X poly_rot (angle, x, y) X float angle; X int *x, *y; X{ int temp; X temp = (*x * cos (angle) - *y * sin (angle)) + .5; X *y = (*x * sin (angle) + *y * cos (angle)) + .5; X *x = temp; X} END_OF_FILE if test 5398 -ne `wc -c <'Vplot_Kernel/filters/genlib/genhatch.c'`; then echo shar: \"'Vplot_Kernel/filters/genlib/genhatch.c'\" unpacked with wrong size! fi # end of 'Vplot_Kernel/filters/genlib/genhatch.c' fi if test -f 'Vplot_Kernel/filters/include/attrcom.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'Vplot_Kernel/filters/include/attrcom.h'\" else echo shar: Extracting \"'Vplot_Kernel/filters/include/attrcom.h'\" $5514 characters$ sed "s/^X//" >'Vplot_Kernel/filters/include/attrcom.h' <<'END_OF_FILE' X/* X * commands to the device's "attributes" routine X */ X X#define SET_COLOR 1 X#define SET_COLOR_TABLE 2 X#define SET_WINDOW 3 X#define NEW_DASH 4 X#define NEW_PAT 5 X#define NEW_FONT 6 X#define NEW_OVERLAY 7 X#define NEW_ALIGN 8 X#define NEW_FAT 9 X#define BEGIN_GROUP 10 X#define END_GROUP 11 X X#define DOVPLOT_CONT 0 /* MUST be zero */ X#define DOVPLOT_EXIT 1 X X/* X * Uses: X * Dummy arguments are not used, but should be listed to make some finicky X * compilers happy, even if you don't use any of the commands that require X * all 4 arguments. By the same token, you should explicitly declare a X * return value of 0 even for those calls that don't use the return value. X * X * dev.attributes(SET_COLOR, col, dummy1, dummy2, dummy3) X * X * Set the current drawing color to col. The device is assumed to X * start out with the current drawing color 7 = WHITE. X * X * dev.attributes(SET_COLOR_TABLE, col, red, green, blue) X * X * Set color number col to have the color (red,green,blue). X * Red, green, and blue are in the range from 0 to MAX_GUN (255), X * with 0 being off and MAX_GUN being fully on. X * Thus, (0,0,0) is black, (128,128,128) is grey, (255,255,255) is white, X * (255,0,0) is red, (255,255,0) is yellow, etc... The device is assumed X * to start out with colors 0 through 7 set as in the vplot standard. X * X * dev.attributes(SET_WINDOW, xmin, ymin, xmax, ymax) X * X * Set current clipping window. (xmin,ymin) is the lower-leftmost X * displayable point. (xmax,ymax) is the upper-rightmost displayable point. X * Only necessary to support this if smart_clip=YES, smart_raster=YES, or X * you don't use a generic routine (genarea) to clip polygons for you. X * After dev.reset has been called, dovplot assumes that the clipping X * window is set by the device to the edge of the device's screen. X * Dev.attributes(SET_WINDOW, ...) will thereafter be called whenever X * the clipping window is changed from its previous setting. (Thus, X * if no clipping window is ever set at all, dev.attributes(SET_WINDOW, ...) X * will never be called.) It is possible for xmin > xmax or ymin > ymax. X * If this happens everything should be clipped away. X * X * dev.attributes(NEW_DASH, dashon, dummy1, dummy2, dummy3) X * X * Warn the device that the current dashed line pattern has just X * been changed. "dashon" is the new value of the external variable X * dashon. (See the dev.vector documentation.) X * X * dev.attributes(NEW_PAT, ipat, dummy1, dummy2, dummy3) X * X * Warn the device that raster pattern "ipat" has been defined X * or redefined. The device does not have to allow re-definition X * of defined patterns. (See the dev.area documentation for a X * description of how patterns are stored.) X * X * dev.attributes(NEW_FONT, txfont, txprec, txovly, dummy1) X * X * Warn the device that the text font, precision, or overlay may have X * been changed. A value of "-1" means no change from the previous value, X * which may be a device-dependent default. This form of dev.attributes X * will be called whenever the user uses the "set text font and precision" X * vplot command (and only then), so you probably should check to see if X * anything really changed before bothering the device. Even better, X * only check these variables at the time that you output hardware text, X * and don't bother with this option in dev.attributes at all. X * X * dev.attributes(NEW_OVERLAY, overlay, dummy1, dummy2, dummy3) X * X * Warn the device that the overlay mode may have been changed. Again, X * most devices will ignore this dev.attributes call, and check the X * external variable overlay only when they actually need to know what X * it is. X * X * dev.attributes(NEW_ALIGN, txalign.hor, txalign.ver, dummy1, dummy2) X * X * Warn the device that the text alignment mode has been changed. Again, X * most devices will ignore this call and just check the alignment X * when hardware text is drawn. X * X * dev.attributes(NEW_FAT, fat, dummy1, dummy2, dummy3) X * X * Warn the device that the fatness has been changed. Again, most devices X * should ignore this call and just check the fatness before processing X * any of the 3 things in which it is used: vectors, text, markers. X * Check the dev.vector documentation for caveats similar to those for X * the NEW_PAT case. X * X * dev.attributes(BEGIN_GROUP, group_number, pos, dummy1, dummy2) X * dev.attributes(END_GROUP, group_number, dummy1, dummy2, dummy3) X * X * extern char group_name[MAXFLEN+1]; X * X * return iflag X * X * Everything between these calls is grouped as one "object". X * Objects may be nested. Objects may not extend across erases, X * breaks, or files. The name of the most recently begun object is X * stored in the external variable group_name. Group_name is defined X * in extern.h. "group_number" gives the heirarchical order of the X * object. Each plot frame is itself an object of group number 0. X * "pos" gives the offset from the start of the file of the start of X * this object. If "pos" is negative, then the input file is one X * for which seeks don't work. Dev.attributes(END_GROUP,...) returns X * "iflag" to tell dovplot what it should do next. X * If "iflag" is DOVPLOT_CONT (=0), then dovplot should continue exactly X * as normal. If "iflag" is DOVPLOT_EXIT, then dovplot will exit upon the X * return of this call. Note that K+R says that failing to declare X * a return value returns garbage, so you MUST declare a return value X * for dev.attributes(END_GROUP,...). To help make sure you do this, X * dovplot will issue a warning message if an unknown return value is X * given. X * X */ END_OF_FILE if test 5514 -ne `wc -c <'Vplot_Kernel/filters/include/attrcom.h'`; then echo shar: \"'Vplot_Kernel/filters/include/attrcom.h'\" unpacked with wrong size! fi # end of 'Vplot_Kernel/filters/include/attrcom.h' fi if test -f 'Vplot_Kernel/filters/loclib/getpar_scan.l' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'Vplot_Kernel/filters/loclib/getpar_scan.l'\" else echo shar: Extracting \"'Vplot_Kernel/filters/loclib/getpar_scan.l'\" $5332 characters$ sed "s/^X//" >'Vplot_Kernel/filters/loclib/getpar_scan.l' <<'END_OF_FILE' X%C NONWHITE [^ \t\n] ALPHA [A-Za-z] ALPHANUM [A-Za-z0-9_-] TAG {ALPHA}{ALPHANUM}*= SQ \'([^'\n]*\'\')*[^'\n]*['\n] DQ \"([^"\n]*\"\")*[^"\n]*["\n] X%{ X/* lexical scanning for fast getpar */ X/* Revised 3-8-86 stew Added time stamp to enable older method of handling X * multiple tags. Moved par= intiialization to X * separate routine to avoid code duplication. X */ X#include <ctype.h> X#include "fastpar.h" X#undef input X#define input() ((int) *(input_stack[input_depth]++)) X#undef unput X/* The redundant =(c) insures side effects of expressions occur */ X#define unput(c) (*(--(input_stack[input_depth]))=(c)) X#define yywrap() getpar_pop_input() X#define yylex() getpar_lexscan() X#define yylook() getpar_yylook() X X#define MAX_INPUT_DEPTH 10 static int input_depth = -1; static char *input_stack[MAX_INPUT_DEPTH]; static char *dealloc_stack[MAX_INPUT_DEPTH]; X static struct { X char *tag; int tlen; X char *val; int vlen; X } yy; X X static int SMALLBLOCK = 4096; static char X*suballoc (size) int size; X{ X static char *myblock = (char *) NULL; static int bytesleft = 0; X char *ptr; extern char *alloc(); X X if(size > SMALLBLOCK) return(alloc(size)); X else X { X if(bytesleft < size) X { X myblock = alloc (SMALLBLOCK); X bytesleft = SMALLBLOCK - size; X } X else X { X bytesleft -= size; X } X ptr = myblock; X myblock += size; X return(ptr); X } X} X static int prime[10] = {31,29,23,19,17,13,11,7,5,3}; int getpar_hash(array,len) register char *array; register int len; X{ X register int hash; X register int i; X if(len >10) len=10; X hash=0; X for(i=0; i<len; i++) X hash += array[i]*prime[i]; X return(hash); X} X X/* workhorse to decode par files; shell already parses command line */ getpar_scan(queue,qlen) register hash_item **queue; register int qlen; X{ X extern int yylex(); X X while(yylex()) { X getpar_hash_store(queue,qlen,yy.tag,yy.val,yy.tlen,yy.vlen); X if(yy.tlen == 3 && 0 == bcmp(yy.tag,"par",3)) X getpar_stack_par(yy.val); X } X} X X/* read parfile into core and put buffer on scan input stack */ getpar_stack_par(val) char *val; X{ X register char *buffer; X register int fd, len; X extern int file(), fsize(); X extern char *alloc(); X X fd = file(val,0); X len = fsize(fd); X buffer=alloc(len+3); X buffer[0]='\n'; X read(fd,buffer+1,len); X buffer[len+1]='\n'; X buffer[len+2]='\0'; X getpar_push_input(buffer,1); X close(fd); X} X X /* return 1 if match; 0 otherwise */ X#define getpar_hash_compare(next1,tag1,tlen1) \ X ((next1)->tlen == (tlen1) && 0 == bcmp((next1)->tag,tag1,tlen1)) X getpar_hash_store(q,qlen,tag,val,tlen,vlen) hash_item **q; register char *tag, *val; register int tlen; int qlen, vlen; X{ X register hash_item *hold, *next; X static int storetime = 0; X X hold=(hash_item *) (q+getpar_hash(tag,tlen)%qlen); X next=hold->next; X X while(next != ((hash_item *) NULL)) { X if(getpar_hash_compare(next,tag,tlen) ) { X next->val = val; next->vlen = vlen; X next->timestamp = storetime++; return; X } X hold = next; next = next->next; X } X X hold->next = next = (hash_item *) suballoc(sizeof(hash_item)); X next->next = (hash_item *) NULL; X next->tlen = tlen; X next->tag = tag; X next->vlen = vlen; X next->val = val; X next->timestamp = storetime++; X} X hash_item *getpar_hash_lookup(q,qlen,tag,tlen) register hash_item **q; register char *tag; register int tlen; register int qlen; X{ X register hash_item *next; X X next = *(q + getpar_hash(tag,tlen)%qlen); X X while(next != ((hash_item *) NULL) ) { X if(getpar_hash_compare(next,tag,tlen)) break; X next = next->next; X } X return(next); X} X X%} X%S FOUNDTAG X%% X<FOUNDTAG>{SQ} { X yy.vlen = yyleng-2; yy.val=suballoc(yy.vlen+1); X yy.vlen = massage(yytext+1,yy.val,yy.vlen,yytext[0]); X yy.val[yy.vlen]='\0'; BEGIN 0; return(FOUNDTAG); X } X<FOUNDTAG>{DQ} { X yy.vlen = yyleng-2; yy.val=suballoc(yy.vlen+1); X yy.vlen = massage(yytext+1,yy.val,yy.vlen,yytext[0]); X yy.val[yy.vlen]='\0'; BEGIN 0; return(FOUNDTAG); X } X<FOUNDTAG>[^'"]{NONWHITE}* { X yy.vlen=yyleng; yy.val=suballoc(yy.vlen+1); X bcopy(yytext,yy.val,yy.vlen+1); BEGIN 0; X return(FOUNDTAG); X } X^{TAG}/{NONWHITE} { X yy.tlen=yyleng-1; yy.tag=suballoc(yy.tlen+1); X bcopy(yytext,yy.tag,yy.tlen); X yy.tag[yy.tlen]='\0'; BEGIN FOUNDTAG; X } X([ \t]{TAG})/{NONWHITE} { X yy.tlen=yyleng-2; yy.tag=suballoc(yy.tlen+1); X bcopy(yytext+1,yy.tag,yy.tlen); X yy.tag[yy.tlen]='\0'; BEGIN FOUNDTAG; X } X^\#.* /* skip comment lines */; X. | X\n ; X%% X getpar_push_input(buffer,dealloc) X register char *buffer; X register int dealloc; X { X if(input_depth++ == MAX_INPUT_DEPTH) X err("too many nested par files\n"); X input_stack[input_depth] = buffer; X if(dealloc) dealloc_stack[input_depth] = buffer; X else dealloc_stack[input_depth] = (char *) NULL; X } X X int X yywrap() X { X if(((char *) NULL) != dealloc_stack[input_depth]) { X free(dealloc_stack[input_depth]); X dealloc_stack[input_depth] = (char *) NULL; X } X input_stack[input_depth--] = (char *) NULL; X if(input_depth < 0) return(1); X return(0); X } X X static int X massage(string,out,len,quote) X register char *string, *out; X register int len, quote; X { X register int i,j; X X for(i=0,j=0; i<len-1; j++) { X out[j]=string[i++]; X if(out[j]==quote) /* compress doubled quotes */ X if(string[i]==quote) i++; X } X if(i<len) out[j++] = string[i]; X return(j); X } END_OF_FILE if test 5332 -ne `wc -c <'Vplot_Kernel/filters/loclib/getpar_scan.l'`; then echo shar: \"'Vplot_Kernel/filters/loclib/getpar_scan.l'\" unpacked with wrong size! fi # end of 'Vplot_Kernel/filters/loclib/getpar_scan.l' fi if test -f 'Vplot_Kernel/filters/utilities/dither.c' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'Vplot_Kernel/filters/utilities/dither.c'\" else echo shar: Extracting \"'Vplot_Kernel/filters/utilities/dither.c'\" $5256 characters$ sed "s/^X//" >'Vplot_Kernel/filters/utilities/dither.c' <<'END_OF_FILE' X/* X * Copyright 1987 the Board of Trustees of the Leland Stanford Junior X * University. Official permission to use this software is included in X * the documentation. It authorizes you to use this file for any X * non-commercial purpose, provided that this copyright notice is not X * removed and that any modifications made to this file are commented X * and dated in the style of my example below. X */ X X/* X * X * source file: ./filters/utilities/dither.c X * X * Joe Dellinger (SEP), June 11 1987 X * Inserted this sample edit history entry. X * Please log any further modifications made to this file: X * Steve Cole (SEP), September 1 1987 X * Added method 4 (digital halftoning). X */ X X/* X * this subroutine converts a single raster line to single bit X * using one of the following algorithms: X * X * 1 random threshold X * 2 256 element ordered dither (oriented at 0 degrees) X * 3 Floyd-Steinberg minimized average error method X * 4 32 element halftone (oriented at 45 degrees) X * X * Steve Cole, April 1987 X * X */ X#include <stdio.h> X#include "../include/err.h" X#include "../include/params.h" X#include "../include/extern.h" static int pix_on, pix_off; char *malloc (); static float *errline; static int ialloc; static float alpha = 0.4375; static float beta = 0.1875; static float gamma = 0.3125; static float delta = 0.0625; static int dith256[256] = { X 1, 128, 32, 160, 8, 136, 40, 168, 2, 130, 34, 162, 10, 138, 42, 170, X 192, 64, 224, 96, 200, 72, 232, 104, 194, 66, 226, 98, 202, 74, 234, 106, X 48, 176, 16, 144, 56, 184, 24, 152, 50, 178, 18, 146, 58, 186, 26, 154, X 240, 112, 208, 80, 248, 120, 216, 88, 242, 114, 210, 82, 250, 122, 218, 90, X 12, 140, 44, 172, 4, 132, 36, 164, 14, 142, 46, 174, 6, 134, 38, 166, X 204, 76, 236, 108, 196, 68, 228, 100, 206, 78, 238, 110, 198, 70, 230, 102, X 60, 188, 28, 156, 52, 180, 20, 148, 62, 190, 30, 158, 54, 182, 22, 150, X 252, 124, 220, 92, 244, 116, 212, 84, 254, 126, 222, 94, 246, 118, 214, 86, X 3, 131, 35, 163, 11, 139, 43, 171, 1, 129, 33, 161, 9, 137, 41, 169, X 195, 67, 227, 99, 203, 75, 235, 107, 193, 65, 225, 97, 201, 73, 233, 105, X 51, 179, 19, 147, 59, 187, 27, 155, 49, 177, 17, 145, 57, 185, 25, 153, X 243, 115, 211, 83, 251, 123, 219, 91, 241, 113, 209, 81, 249, 121, 217, 89, X 15, 143, 47, 175, 7, 135, 39, 167, 13, 141, 45, 173, 5, 133, 37, 165, X 207, 79, 239, 111, 199, 71, 231, 103, 205, 77, 237, 109, 197, 69, 229, 101, X 63, 191, 31, 159, 55, 183, 23, 151, 61, 189, 29, 157, 53, 181, 21, 149, X 254, 127, 223, 95, 247, 119, 215, 87, 253, 125, 221, 93, 245, 117, 213, 85 X}; static int halftone32[64] = { X 92, 100, 124, 148, 164, 156, 132, 108, X 28, 20, 76, 220, 228, 236, 180, 36, X 4, 12, 84, 212, 252, 244, 172, 44, X 52, 60, 116, 188, 204, 196, 140, 68, X 164, 156, 132, 108, 92, 100, 124, 148, X 228, 236, 180, 36, 28, 20, 76, 220, X 252, 244, 172, 44, 4, 12, 84, 212, X 204, 196, 140, 68, 52, 60, 116, 188 X}; X X dithline (inline, outline, npixels, linenum, imethod) X unsigned char *inline, *outline; X int npixels, linenum, imethod; X{ int greydata; int i1, ipoint, jpoint; float pixel, pixerr, nexterr; int irand; X X/* set polarity */ X if (linenum == 1) X { X if (invras) X { X pix_off = 0; X pix_on = 7; X } X else X { X pix_off = 7; X pix_on = 0; X } X } X X/* Random Dither */ X if (imethod == 1) X { X for (i1 = 0; i1 < npixels; i1++) X { X greydata = inline[i1]; X irand = (random () & 255); X if (greydata > irand) X { X outline[i1] = pix_off; X } X else X { X outline[i1] = pix_on; X } X } X } X X/* Ordered Dither */ X if (imethod == 2) X { X for (i1 = 0; i1 < npixels; i1++) X { X greydata = inline[i1]; X ipoint = i1 % 16; X jpoint = linenum % 16; X ipoint = ipoint * 16 + jpoint; X if (greydata > dith256[ipoint]) X { X outline[i1] = pix_off; X } X else X { X outline[i1] = pix_on; X } X } X } X X/* Floyd-Steinberg */ X if (imethod == 3) X { X if (ialloc != 1) X { X if ((errline = (float *) malloc ((unsigned) npixels * sizeof (float))) == NULL) X { X ERR (FATAL, name, "Can't allocate space for Floyd-Steinberg\n"); X return; X } X ialloc = 1; X for (i1 = 0; i1 < npixels; i1++) X { X errline[i1] = 0.; X } X } X nexterr = errline[0]; X for (i1 = 0; i1 < npixels; i1++) X { X pixel = inline[i1]; X pixel += nexterr; X if (pixel < 128) X { X outline[i1] = pix_on; X pixerr = pixel; X } X else X { X outline[i1] = pix_off; X pixerr = pixel - 255; X } X if (i1 < npixels) X { X nexterr = errline[i1 + 1] + pixerr * alpha; X errline[i1 + 1] = pixerr * delta; X } X if (i1 > 0) X { X errline[i1 - 1] += pixerr * beta; X } X errline[i1] += pixerr * gamma; X if (i1 == 0) X errline[i1] = pixerr * gamma; X } X } X X X/* 32 element halftone at 45 degrees */ X if (imethod == 4) X { X for (i1 = 0; i1 < npixels; i1++) X { X greydata = inline[i1]; X ipoint = i1 % 8; X jpoint = linenum % 8; X ipoint = ipoint * 8 + jpoint; X if (greydata > halftone32[ipoint]) X { X outline[i1] = pix_off; X } X else X { X outline[i1] = pix_on; X } X } X } X X} END_OF_FILE if test 5256 -ne `wc -c <'Vplot_Kernel/filters/utilities/dither.c'`; then echo shar: \"'Vplot_Kernel/filters/utilities/dither.c'\" unpacked with wrong size! fi # end of 'Vplot_Kernel/filters/utilities/dither.c' fi if test -f 'Vplot_Kernel/filters/utilities/fatvec.c' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'Vplot_Kernel/filters/utilities/fatvec.c'\" else echo shar: Extracting \"'Vplot_Kernel/filters/utilities/fatvec.c'\" $5227 characters$ sed "s/^X//" >'Vplot_Kernel/filters/utilities/fatvec.c' <<'END_OF_FILE' X/* X * Copyright 1987 the Board of Trustees of the Leland Stanford Junior X * University. Official permission to use this software is included in X * the documentation. It authorizes you to use this file for any X * non-commercial purpose, provided that this copyright notice is not X * removed and that any modifications made to this file are commented X * and dated in the style of my example below. X */ X X/* X * X * source file: ./filters/utilities/fatvec.c X * X * Joe Dellinger (SEP), June 11 1987 X * Inserted this sample edit history entry. X * Please log any further modifications made to this file: X */ X X/* X * Utility routine to make fat vectors from several thin ones. X * Should ONLY be called if nfat > 0 and dashon = 0 X * X * Algorithm by Glenn Kroeger X * Changes added by Joe Dellinger to make it more efficient when plotting X */ X X#include <stdio.h> X#include <math.h> X#include "../include/extern.h" X fatvec (x1, y1, x2, y2, nfat, dashon) X int x1, y1, x2, y2; X int nfat, dashon; X{ register int i; register int fplus, fminus; static int lastdir = 0; X X lastdir = 1 - lastdir; X X if (aspect_ratio != 1. && (y2 != y1 || x2 != x1) && nfat) X { nfat = (float) nfat *sqrt ( X ((y2 - y1) * (y2 - y1) + ((x2 - x1) * (x2 - x1)) X / (aspect_ratio * aspect_ratio)) / X ((y2 - y1) * (y2 - y1) + ((x2 - x1) * (x2 - x1))) X ); X } X X fminus = (nfat / 2); X fplus = (nfat + 1) / 2; X X if (x1 <= x2) X { X if (y2 > y1) X { X if (x1 == x2) X { X for (i = -fminus; i <= fplus; i++) X dev.vector (x1 + i, y1 - fminus, x2 + i, y2 + fplus, 0, 0); X } X else X { X X if (lastdir) X { X for (i = (fminus + fplus); i > 0; i--) X { X dev.vector (x1 - fminus + i, y1 - fminus, x2 + fplus, X y2 + fplus - i, 0, 0); X } X dev.vector (x1 - fminus, y1 - fminus, x2 + fplus, y2 + fplus, 0, 0); X for (i = 1; i < (fminus + fplus + 1); i++) X { X dev.vector (x1 - fminus, y1 - fminus + i, x2 + fplus - i, X y2 + fplus, 0, 0); X } X } X else X { X for (i = (fminus + fplus); i > 0; i--) X { X dev.vector (x1 - fminus, y1 - fminus + i, x2 + fplus - i, X y2 + fplus, 0, 0); X } X dev.vector (x1 - fminus, y1 - fminus, x2 + fplus, y2 + fplus, 0, 0); X for (i = 1; i < (fminus + fplus + 1); i++) X { X dev.vector (x1 - fminus + i, y1 - fminus, x2 + fplus, X y2 + fplus - i, 0, 0); X } X } X } X } X else X if (y2 == y1) X { X for (i = -fminus; i <= fplus; i++) X dev.vector (x1 - fminus, y1 + i, x2 + fplus, y2 + i, 0, 0); X } X else X { X if (x1 == x2) X { X for (i = -fminus; i <= fplus; i++) X dev.vector (x1 + i, y1 + fplus, x2 + i, y2 - fminus, 0, 0); X } X else X { X X if (lastdir) X { X for (i = (fminus + fplus); i > 0; i--) X { X dev.vector (x1 - fminus + i, y1 + fplus, x2 + fplus, X y2 - fminus + i, 0, 0); X } X dev.vector (x1 - fminus, y1 + fplus, x2 + fplus, y2 - fminus, 0, 0); X for (i = 1; i < (fminus + fplus + 1); i++) X { X dev.vector (x1 - fminus, y1 + fplus - i, x2 + fplus - i, X y2 - fminus, 0, 0); X } X } X else X { X for (i = (fminus + fplus); i > 0; i--) X { X dev.vector (x1 - fminus, y1 + fplus - i, x2 + fplus - i, X y2 - fminus, 0, 0); X } X dev.vector (x1 - fminus, y1 + fplus, x2 + fplus, y2 - fminus, 0, 0); X for (i = 1; i < (fminus + fplus + 1); i++) X { X dev.vector (x1 - fminus + i, y1 + fplus, x2 + fplus, X y2 - fminus + i, 0, 0); X } X } X } X } X } X else X { X if (y2 > y1) X { X if (lastdir) X { X for (i = (fminus + fplus); i > 0; i--) X { X dev.vector (x1 + fplus, y1 - fminus + i, x2 - fminus + i, y2 + fplus, 0, 0); X } X dev.vector (x1 + fplus, y1 - fminus, x2 - fminus, y2 + fplus, 0, 0); X for (i = 1; i < (fminus + fplus + 1); i++) X { X dev.vector (x1 + fplus - i, y1 - fminus, x2 - fminus, y2 + fplus - i, 0, 0); X } X } X else X { X for (i = (fminus + fplus); i > 0; i--) X { X dev.vector (x1 + fplus - i, y1 - fminus, x2 - fminus, y2 + fplus - i, 0, 0); X } X dev.vector (x1 + fplus, y1 - fminus, x2 - fminus, y2 + fplus, 0, 0); X for (i = 1; i < (fminus + fplus + 1); i++) X { X dev.vector (x1 + fplus, y1 - fminus + i, x2 - fminus + i, y2 + fplus, 0, 0); X } X } X } X else X if (y2 == y1) X { X for (i = -fminus; i <= fplus; i++) X dev.vector (x1 + fplus, y1 + i, x2 - fminus, y2 + i, 0, 0); X } X else X { X if (lastdir) X { X for (i = (fminus + fplus); i > 0; i--) X { X dev.vector (x1 + fplus, y1 + fplus - i, x2 - fminus + i, y2 - fminus, 0, 0); X } X dev.vector (x1 + fplus, y1 + fplus, x2 - fminus, y2 - fminus, 0, 0); X for (i = 1; i < (fminus + fplus + 1); i++) X { X dev.vector (x1 + fplus - i, y1 + fplus, x2 - fminus, y2 - fminus + i, 0, 0); X } X } X else X { X for (i = (fminus + fplus); i > 0; i--) X { X dev.vector (x1 + fplus - i, y1 + fplus, x2 - fminus, y2 - fminus + i, 0, 0); X } X dev.vector (x1 + fplus, y1 + fplus, x2 - fminus, y2 - fminus, 0, 0); X for (i = 1; i < (fminus + fplus + 1); i++) X { X dev.vector (x1 + fplus, y1 + fplus - i, x2 - fminus + i, y2 - fminus, 0, 0); X } X } X } X } X} END_OF_FILE if test 5227 -ne `wc -c <'Vplot_Kernel/filters/utilities/fatvec.c'`; then echo shar: \"'Vplot_Kernel/filters/utilities/fatvec.c'\" unpacked with wrong size! fi # end of 'Vplot_Kernel/filters/utilities/fatvec.c' fi if test -f 'Vplot_Kernel/lvplot/vp_raster.c' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'Vplot_Kernel/lvplot/vp_raster.c'\" else echo shar: Extracting \"'Vplot_Kernel/lvplot/vp_raster.c'\" $5777 characters$ sed "s/^X//" >'Vplot_Kernel/lvplot/vp_raster.c' <<'END_OF_FILE' X/* X * Copyright 1987 the Board of Trustees of the Leland Stanford Junior X * University. Official permission to use this software is included in X * the documentation. It authorizes you to use this file for any X * non-commercial purpose, provided that this copyright notice is not X * removed and that any modifications made to this file are commented X * and dated in the style of my example below. X */ X X/* X * X * source file: ./lvplot/vp_raster.c X * X * Joe Dellinger (SEP), June 11 1987 X * Inserted this sample edit history entry. X * Please log any further modifications made to this file: X * Joe Dellinger Jan 14 1988 X * Do rounding. X */ X X/* This program cannot be indented! */ X X#include <stdio.h> X#include <vplot.h> X#include "round.h" X#include "vp_pc.h" X X#ifdef FORTRAN X X#define RASTER vpraster_ X#define XLL *xll X#define YLL *yll X#define XPIX *xpix X#define YPIX *ypix X#define PPI *ppi X#define BIT *bit X#define OFFSET *offset X#define BLAST *blast X#define ORIENT *orient X#define INVERT *invert X X#else X X#define RASTER vp_raster X#define XLL xll X#define YLL yll X#define XPIX xpix X#define YPIX ypix X#define PPI ppi X#define BIT bit X#define OFFSET offset X#define BLAST blast X#define ORIENT orient X#define INVERT invert X X#endif X X#define ARRAY(A,B) array[(((INVERT)==0)?(A):(YPIX-1-(A)))*(XPIX)+(B)] X X#define MAXREP 8 X#define PUTHSIZE sizeof(int) X X#define RASOUT(NUMPAT,NUMBYTE,BITFLAG,BYTES) \ X{\ X puth ((int) (NUMPAT), vp_pc._pltout);\ X puth ((int) (NUMBYTE), vp_pc._pltout);\ X\ X if (BITFLAG)\ X {\ X for (nn = 0; nn + 7 < (NUMBYTE); nn += 8)\ X {\ X obyte = 0x00;\ X\ X obyte =\ X ((*((BYTES) + nn + 0) != 0) << 7) |\ X ((*((BYTES) + nn + 1) != 0) << 6) |\ X ((*((BYTES) + nn + 2) != 0) << 5) |\ X ((*((BYTES) + nn + 3) != 0) << 4) |\ X ((*((BYTES) + nn + 4) != 0) << 3) |\ X ((*((BYTES) + nn + 5) != 0) << 2) |\ X ((*((BYTES) + nn + 6) != 0) << 1) |\ X ((*((BYTES) + nn + 7) != 0) << 0);\ X putc ((char) obyte, vp_pc._pltout);\ X }\ X if (nn < (NUMBYTE))\ X {\ X obyte = 0x00;\ X for (nnn = 7; nn < (NUMBYTE); nn++, nnn--)\ X {\ X obyte |= ((*((BYTES) + nn) != 0) << nnn);\ X }\ X putc ((char) obyte, vp_pc._pltout);\ X }\ X }\ X else\ X {\ X for (nn = 0; nn < (NUMBYTE); nn++)\ X {\ X putc ((char) * ((BYTES) + nn), vp_pc._pltout);\ X }\ X }\ X} X RASTER (array, blast, bit, offset, xpix, ypix, xll, yll, ppi, xur, yur, orient, invert) unsigned char *array; float XLL, YLL, *xur, *yur, PPI; int XPIX, YPIX, BIT, OFFSET, BLAST, ORIENT, INVERT; X{ X int mm, nn, nnn, ll, kk, jj, ii, count, ucount, bitbyte; X int ix, iy; X unsigned char obyte; X X if (BIT) X { X bitbyte = 8; X putc (VP_BIT_RASTER, vp_pc._pltout); X } X else X { X bitbyte = 1; X putc (VP_BYTE_RASTER, vp_pc._pltout); X } X X if (ORIENT >= 0) X ORIENT = ORIENT % 4; X else X ORIENT = ((ORIENT % 4) + 4) % 4; X X puth ((int) ORIENT, vp_pc._pltout); X puth ((int) offset, vp_pc._pltout); X ix = ROUND (XLL * RPERIN); X iy = ROUND (YLL * RPERIN); X puth (ix, vp_pc._pltout); X puth (iy, vp_pc._pltout); X if (PPI > 0) X { X ix += ROUND (RPERIN * XPIX / PPI); X iy += ROUND (RPERIN * YPIX / PPI); X *xur = ix / (float) RPERIN; X *yur = iy / (float) RPERIN; X } X else X { X ix = ROUND (*xur * RPERIN); X iy = ROUND (*yur * RPERIN); X } X puth (ix, vp_pc._pltout); X puth (iy, vp_pc._pltout); X X puth ((int) XPIX, vp_pc._pltout); X puth ((int) YPIX, vp_pc._pltout); X X if (BLAST) X { X/* Don't try to compact it at all */ X for (ii = 0; ii < YPIX; ii++) X { X puth ((int) 1, vp_pc._pltout); X RASOUT (1, XPIX, BIT, &ARRAY (ii, 0)); X } X } X else X { X/* Try to compact it */ X count = 1; X for (ii = 0; ii < YPIX; ii++) X { X for (jj = 0; jj < XPIX; jj++) X { X if (ii == YPIX - 1 || ARRAY (ii, jj) != ARRAY (ii + 1, jj)) X { X/* Write this row out, it's not just a repeat of the next one */ X X/* Write out how many times this line is to be repeated */ X puth (count, vp_pc._pltout); X X/* X * This entire section tries to efficiently represent ONE RASTER LINE X */ X X/* X * Keep track of "unaccounted for" bytes between X * bytes containted in a pattern X */ X ucount = 0; X/* Loop through a raster line */ X for (kk = 0; kk < XPIX; kk++) X { X/* Try different size patterns */ X for (ll = 1; ll <= MAXREP; ll++) X { X/* See how far this pattern size works */ X for (mm = 0; mm <= XPIX - (kk + ll); mm++) X { X/* Pattern stopped working */ X if (mm == XPIX - (kk + ll) || X ARRAY (ii, kk + mm) != ARRAY (ii, kk + mm + ll)) X { X/* See how many repetitions we got */ X mm = ll * (1 + (int) (mm / ll)); X/* Is it worth it to use this? */ X/* (PUTHSIZE is the number of bytes needed for a puth */ X if (PUTHSIZE * 2 + ll <= 1 + (mm - 1) / bitbyte) X { X/* First take care of bytes not in a pattern */ X if (ucount > 0) X { X RASOUT (1, ucount, BIT, &ARRAY (ii, kk - ucount)); X ucount = 0; X } X/* Now take care of the bytes in the pattern */ X RASOUT ((int) mm / ll, ll, BIT, &ARRAY (ii, kk)); X kk += mm - 1; X/* Stop looking, we already found what we wanted */ X goto compact_found; X } X/* This pattern didn't work. Stop looking at this size and try a longer one */ X break; X } X } X } X/* No pattern including this byte, add it to the unaccounted for list */ X ucount++; X compact_found: X continue; X } X/* Take care of any bytes left hanging on the end */ X if (ucount > 0) X { X RASOUT (1, ucount, BIT, &ARRAY (ii, kk - ucount)); X } X/* X * END of section that does ONE RASTER LINE X */ X X X/* Reset counter */ X count = 1; X/* Exit the loop */ X break; X } X } X/* If we didn't write it out, it will just be a repeat of the next one */ X if (jj == XPIX) X count++; X } X } X} END_OF_FILE if test 5777 -ne `wc -c <'Vplot_Kernel/lvplot/vp_raster.c'`; then echo shar: \"'Vplot_Kernel/lvplot/vp_raster.c'\" unpacked with wrong size! fi # end of 'Vplot_Kernel/lvplot/vp_raster.c' fi echo shar: End of archive 13 $of 24$. cp /dev/null ark13isdone MISSING="" for I in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 ; do if test ! -f ark${I}isdone ; then MISSING="${MISSING} ${I}" fi done if test "${MISSING}" = "" ; then echo You have unpacked all 24 archives. rm -f ark[1-9]isdone ark[1-9][0-9]isdone else echo You still need to unpack the following archives: echo " " ${MISSING} fi ## End of shell archive. exit 0