10000 Modem Doctor Warning\n\n The Flow Control settings in the driver are incorrect. The driver should be set for RTS/CTS mode, but it is not. Your driver may not be Windows Compatible. Modem may fail the following diagnostic tests.
10001 Modem Doctor Warning\n\n The Carrier Detect Line from modem to driver is active. This needs to be reset with the command AT&C1. Modem Doctor will do this and continue testing.
10003 Modem Doctor Warning\n\n The CTS handshake line between modem and drive is inactive. Either you have a bad cable or your modem is off.Modem Doctor will continue testing. If there are errors, run driver diagnostics.
10004 Modem Doctor Warning\n\n You pressed the abort key during testing. Test results may be incorrect. To properly test, you need to wait until testing is completed.
10005 FIXED LINK ADVISORY\n\n Your modem's DTE rate between computer and modem is not locked. I had to lower the baud rate to match the link rate. For high-speed modems, the DTE rate must be locked. Check your modem manual for instructions.
10006 Modem Doctor Warning\n\n This command is available only in the Registered Version of the program. Select INFO and Order Form to find out how to register your copy.
10007 Modem Doctor Warning\n\n You have not selected a port for testing. Please return to the setup menu and select a port.
10008 Modem Doctor Warning\n\n No Fax Capabilities were detected during testing. You need at least a Class 1 Faxmodem in order to run these tests.
10009 RTS/CTS Handshaking\n Handshaking instructs your modem when and when not to send characters to your program. Proper operation is necessary for high-speed modems. Modem Doctor will use your current settings or send the proper commands for this test.
10010 XON/XOFF Handshaking\n Handshaking instructs your modem when and when not to send characters to your program. Proper operation is necessary for high-speed modems. Modem Doctor will use your current settings or send the proper commands for this test.
10200 Carrier Test\n\n This test simulates an on-line connection, and sends all 255 ASCII characters to your modem. All characters may not print, but their codes are verified.\n\n Press OK if you wish to run this test.
10201 ASCII Loopback Test\n\n This test simulates an on-line connection, and sends all 255 ASCII characters to your modem/serial port. All characters may not print, but their codes are verified.\n\n Press OK if you wish to run this test.
10202 Data Pattern Test\n\n This test sends a test sequence to your modem/serial port. The pattern is a special sequence of ASCII characters meant to stress the serializing process\n\n Press OK if you wish to run this test.
10203 Alt Data Test\n\n This test sends an alternating test sequence to your modem/serial port. The pattern is an alternating pattern of binary data meant to stress the serializing process\n\n Press OK if you wish to run this test.
61440 Cannot assign a %s to a %s
61441 Cannot create file %s
61442 Cannot open file %s
61443 Stream read error
61444 Stream write error
61445 Out of memory while expanding memory stream
61446 Can't write to a read-only resource stream
61447 WriteObject called twice for the same instance
61448 Class %s not found
61449 Invalid stream format
61450 Resource %s not found
61451 Resource %s is of incorrect class
61452 List index out of bounds
61453 Operation not allowed on sorted string list
61454 String list does not allow duplicates
61455 Tab index out of bounds
61456 A component named %s already exists
61457 ''%s'' is not a valid component name
61458 A class named %s already exists
61459 ''%s'' is not a valid integer value
61460 Line too long
61461 Invalid property value
61462 Invalid property path
61463 Property does not exist
61464 Property is read-only
61465 Error reading %s.%s: %s
61466 Ancestor for '%s' not found
61467 Bitmap image is not valid
61468 Icon image is not valid
61469 Metafile is not valid
61470 Bitmap is empty
61471 Cannot change the size of an icon
61472 Unknown picture file extension (.%s)
61473 Unsupported clipboard format
61474 Out of system resources
61475 Canvas does not allow drawing
61476 Invalid image size
61477 Too many images
61478 Image dimensions do not match image list dimensions
61479 Invalid ImageList
61480 Unable to Replace Image
61481 Invalid ImageList Index
61482 Error creating window device context
61483 Client of TDrag not initialized
61484 Error creating window class
61485 Error creating window
61486 Cannot focus a disabled or invisible window
61487 Control '%s' has no parent window
61488 Cannot hide an MDI Child Form
61489 Cannot change Visible in OnShow or OnHide
61490 Cannot make a visible window modal
61491 Scrollbar property out of range
61492 %s property out of range
61493 Menu index out of range
61494 Menu inserted twice
61495 Sub-menu is not in menu
61496 Not enough timers available
61497 Printer is not currently printing
61498 Printing in progress
61499 Printer index out of range
61500 Printer selected is not valid
61501 %s on %s
61502 GroupIndex cannot be less than a previous menu item's GroupIndex
61503 Cannot have more than one MDI form per application
61504 Cannot create form. No MDI forms are currently active
61505 Invalid component registration
61506 Can only modify an image if it contains a bitmap
61507 A control cannot have itself as its parent
61508 OK
61509 Cancel
61510 &Yes
61511 &No
61512 &Help
61513 &Close
61514 &Ignore
61515 &Retry
61516 Abort
61517 &All
61518 Cannot drag a form
61519 PutObject to undefined item
61520 Could not load CARDS.DLL
61521 Duplicate CardId found
61522 An error returned from DDE ($0%x)
61523 DDE Error - conversation not established ($0%x)
61524 Error occurred when DDE ran out of memory ($0%x)
61525 Unable to connect DDE conversation
61526 FB
61527 FG
61528 BG
61529 Cannot load older version of TShape
61530 Metafiles
61531 Enhanced Metafiles
61532 Icons
61533 Bitmaps
61534 Grid too large for operation
61535 Too many rows or columns deleted
61536 Grid index out of range
61537 Fixed column count must be less than column count
61538 Fixed row count must be less than row count
61539 %s on line %d
61540 Identifier expected
61541 String expected
61542 Number expected
61543 ''%s'' expected
61544 %s expected
61545 Invalid numeric value
61546 Invalid string constant
61547 Invalid property value
61548 Invalid binary value
61549 Outline index not found
61550 Parent must be expanded
61551 Invalid value for current item
61552 Invalid input value
61553 Invalid input value. Use escape key to abandon changes
61554 Invalid outline index
61555 Incorrect level assignment
61556 Invalid selection
61557 File load error
61558 Line too long
61559 Maximum outline depth exceeded
61560 Warning
61561 Error
61562 Information
61563 Confirm
61564 &Yes
61565 &No
61566 OK
61567 Cancel
61568 &Help
61569 No help available
61570 Help
61571 &Abort
61572 &Retry
61573 &Ignore
61574 &All
61575 BkSp
61576 Tab
61577 Esc
61578 Enter
61579 Space
61580 PgUp
61581 PgDn
61582 End
61583 Home
61584 Left
61585 Up
61586 Right
61587 Down
61588 Ins
61589 Del
61590 Shift+
61591 Ctrl+
61592 Alt+
61593 (Unknown)
61594 (None)
61595 Value must be between %d and %d
61596 Cannot create a default method name for an unnamed component
61597 Invalid argument to date encode
61598 Invalid argument to time encode
61599 ''%s'' is not a valid date
61600 ''%s'' is not a valid time
61601 ''%s'' is not a valid date and time
61602 Invalid file name - %s
61603 All files (*.*)|*.*
61604 All
61605 : [ - no volume label - ]
61606 Unable to insert a line
61607 The specified directory does not exist. Create it?
61608 Select Directory
61609 Directory &Name:
61610 D&rives:
61611 &Directories:
61612 &Files: (*.*)
61613 Ne&twork...
61614 Color
61615 ABCDEFGHIJKLMNOP
61616 Invalid clipboard format
61617 Clipboard does not support Icons
61618 Default
61619 Text exceeds memo capacity
61620 Custom Colors
61621 Operation not supported on selected printer
61622 There is no default printer currently selected
61623 Unable to write to %s
61624 Bits index out of range
61625 (Untitled)
61626 Invalid data type for '%s'
61627 Failed to create key %s
61628 Failed to set data for '%s'
61629 Failed to get data for '%s'
61630 Synchronize called when main VCL thread in a WaitFor call
