home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Hot Shareware 35
/
hot35.iso
/
ficheros
/
LC
/
SIMPMO24.ZIP
/
SIMPMOUS.ZIP
/
MOUGENRL.TXT
< prev
next >
Wrap
Text File
|
1998-06-26
|
2KB
|
29 lines
General Info
Simple Mouse v2.4 is designed to work with the rest of The
Simpsoft Inc. family or as a stand alone C/C++ lib for mouse
control. It has a true graphics cursor that is changeable and no
interrupt handler. The cursor uses ASCII characters 0xdc - 0xdf.
Using only four characters for the cursor requires a smaller
cursor character (6x14 in VGA and 6x12 in EGA). I give you eight
of these in moucurs.fnt. Position is returned in both text graphic
X and Y and pixel. Plus with no handler abnormal termination
will not lock your machine. It is multi font ready and will work
in both standard and dual font modes.
Installation is easy just unzip SIMPMO24.ZIP and from that
directory or disk type install at the prompt. Then follow the
instructions. Simple Mouse can be deinstalled just as easy.
Again use install.exe from the distribution disk or if zipped
unzip to a temp directory and run from there. Simpmous.doc can be
read or printed with readocs.exe. It is a text file reader/printer
and will read or print a text file.
This program and utility were compiled on a 386 clone with the
286 instruction set. It requires a 286 PC or compatible DOS 4.1
or higher,MS mouse, and EGA or higher (VGA for some
functions). A 9 pin dot matrix is needed to print the docs.
Feel free to call me or leave a note of criticism or praise
about this or any other part of this utility. Any feedback will be
greatly appreciated. See Support.