This Visio Solution is not compatible with a 16-bit environment.
Exiting setup...A
GetDebugValue()
Setup.inia
DEBUGR
Found: %sb
VisLogo.bmp
Product&
SolutionNameR9
SolutionVersionR,
DefaultTargetRY
$(PROGRAM_FILES_DIR)\!
ProductGIDFileRn
LicenseFileRo
License.Txt
LicenseDialogTitleRp
IntroBitmapRq
WWWContactSiteRf
www.visio.com
ShapesFolderRg
Solutions
SpecialProductTypeR
VNE.ini
Lne.DAT
Stencils\Hidden%
LocNetEqa
StencilPathb
Flags&
MinVersionRequiredR:
UseDefaultDirNamesRv
VisioTypeRequiredRw
Visio
Visio50ServiceReleaseRequiredRx
InstallOverTestDrivesR
TRUE!
SolutionRequiresVBARy
NeedIconsRz
RegisterHelpR1
EnableDualFileSetsForUSandIER
TRUE!
EnableBitmapFadeR
FALSE!
Visio5&
Ver5Rs
Ver5ARt
Ver5BRu
FileTypes&
UseArchiveRm
TemplatesRj
StencilsRk
HelpRl
Setup is unable to read product information from
the Setup.ini file on the CD root.
Exiting...
This program requires VGA or better resolution.A
Please read the following license agreement. Use the scroll bar to view the rest of this agreement.a
Do you accept all the terms of the preceding license agreement? If so, click on the Yes push button. If you select No, Setup will close.bo
NONE(
To install to a different location, click Browse and navigate to the folder of your choice.
To quit without installing, click Cancel.
Setup has detected that the version of Visio you have installed
is older than the minimum version required for this Solution. This
product requires %s or newer to function properly.b
Would you like Setup to update your Visio installation to the
required version?
Select YES to update your Visio version and continue.$
Click NO to exit Setup without installing this Visio Solution product.
This Visio Solution is an add-on that requires %s. b
Setup is unable to locate this version of Visio on your machine.
To continue, click Browse and select the ROOT directory of your Visio installation. You will be prompted if Setup is able to update your Visio product to the required version.$
To quit without installing, click Cancel.
Setup is unable to locate the Visio installation on your machine.
Please click Browse and select the ROOT directory of your Visio product installation.$
To quit without installing, click Cancel.
Setup has detected a valid Visio installation in the location below.
To install the add-on into this directory, click Next.
Setup will install files into appropriate subdirectories.$
To install to a different location, click Browse and select the ROOT directory of another Visio installation.$
To quit without installing, click Cancel.
Misca
SysFntDestTitleR
Setup.ini
Flagsa
SolutionRequiresVBAR
TRUE!
This %s Solution requires the use of Microsoft's
Visual Basic for Applications (VBA). Setup has detected that
VBA was NOT installed with your %s product.a
After setup has completed, you must install VBA from your
%s 5.0 CD for this Solution to function properly.
Please see the Readme.txt file for more information.
Would you like to continue?(
Vistst32.Exe
Visio32.Exe
VBACheckFileR
vbe.dll
Software\Microsoft\Shared Tools\b
\clients
System\Visio.ini
applicationa
NoVBA2
No installation location has been selected!
To continue, you must select a destination
directory.*
NONE(
Setup cannot locate a valid Visio Installation in
the Destination Directory. This product requires
%s or higher to function properly.
Select a directory that contains a valid Visio
installation.b
This Solution requires a base product of Visio %s or higher.
Setup cannot locate a Visio %s installation in the selected
destination directory. For information on how to upgrade to
Visio %s, please contact Customer Support.b:
Call: 1-800-24-VISIO (1-800-248-4746), ref#Q309.$
Europe, Africa, and the Middle East
Tel: +353.61.704.634 --- Fax: +353.61.704.635
Japan
Tel: 03.3584.6731 --- Fax: 03.3584.6729
Australia
Tel: 1.800.647.227 --- Fax: 1.800.624.818
Setup has detected that the version of Visio you have installed
is older than the minimum version required for this Solution. This
product requires %s or newer to function properly.b
Would you like Setup to update your Visio installation to the
required version?
Select YES to update your Visio version and continue.$
Click NO to select a different installation directory.
To update to version 5.0%s, you will need to install Visio Service
Release %s. Service Release %s is available on the World Wide
Web at http://www.visio.com/support/service/index.htm.bx
If you do not have access to the World Wide Web, please
contact Visio Technical Support or refer to the Readme.txt
file on your CD.$
JAPAN
Tel: 03 3584 6831 --- Fax: 03 3584 6854
FRANCE
Tel: 0800 90 64 79 --- Fax: 0800 90 64 81
GERMANY
Tel: 0130 820 485 --- Fax: 0130 820 486
ALL Other Countries:
Tel: +353 1 706 0155 --- Fax: +353 1 260 1799
If you do not have access to the World Wide Web, please
contact Visio Technical Support or refer to the Readme.txt
file on your CD.$
Tel: 541 882 8687 --- Fax: 541 882 8446
Setup has detected that the version of Visio you have installed
is older than the minimum version required for this Solution. This
product requires %s or newer to function properly.b
_TestDrive
Patchersb}
Patchers%
\Vistsr32.dll
\VisRes32.dll
UNKNOWN
Automatic-patching has failed. Setup is unable to update your Visio installation to the required level.
Possible reasons for this error include:
1) Service Releases are language specific. You must have matching patch and Visio product language versions.
If a patch for your language is not available, please contact Visio technical support at one of the numbers
listed below.
2) Your version of Visio does not match any of the versions supported by this patch. Patching non-commercial
versions of Visio is not supported.
For further assistance, please contact Visio technical support or refer to the Readme.txt file on your CD.$
JAPAN
Tel: 03 3584 6831 --- Fax: 03 3584 6854
FRANCE
Tel: 0800 90 64 79 --- Fax: 0800 90 64 81
GERMANY
Tel: 0130 820 485 --- Fax: 0130 820 486
ALL Other Countries:
Tel: +353 1 706 0155 --- Fax: +353 1 260 1799
Automatic-patching has failed. Setup is unable to update your Visio installation to the required level.
Possible reasons for this error include:
1) Service Releases are language specific. You must have matching patch and Visio product language versions.
If a patch for your language is not available, please contact Visio technical support at one of the numbers
listed below.
2) Your version of Visio does not match any of the versions supported by this patch. Patching non-commercial
versions of Visio is not supported.
For further assistance, please contact Visio technical support or refer to the Readme.txt file on your CD.$
Tel: 541 882 8687 --- Fax: 541 882 8446
Patchers\VisPatchW.Exe
-Q -P b{
-U $
Updating Visio to the required version...A
Vistst32.EXE
Visio32.EXE
Updating Visio to the required version...A
Updating Visio to the required version...A
@12001;1;255,0,255A
@12004;1;255,0,255A
Complete
Install shapes for all Manufacturers. This option will require 192.5MB of free disk space.A
Custom/Add
Select which Manufacturer shapes to install. Use this option to add shapes to a new or existing installation.A
Same as 'Custom/Add' but Setup will automatically re-select manufacturers from the previous installation. A
Select Setup Type.a(
Click the type of Setup that you prefer.B
Configuring Install Selections...A
Configuring Install Selections...A
Select the alphabetical list that includes the manufacturers you wish to install. Use the Change button to select or deselect individual manufacturers from within each list.b$
Unable to create a directory under %s. Please check write access to this directory.b
There is not enough space available on the disk:
' svTarget '
Please free up some space or change the target location
to a different disk.A
Packing list error.A
Error copying or decompressing files.A
Unable to find specified file in compressed archive.A
General file transfer error. Please check your target location and try again.
Error Number: %s
Related File: %sb
TRUE!
Configuring Solution Files...A
Configuring Solution Files...A
Configuring Solution Files...A
Configuring Solution Files...A
Flagsa
BetaWareR
TRUE!
Flagsa
BetaContactR
Stringsa
BetaWarnR
WARNING: This Visio Solution is Betaware and will
not be supported through Visio Tech Support. To
submit problems or suggestions, please send email
to %s.
Stringsa
BetaWarnTitleR
Beta Version Warning
Readme.txt
Solutions%
Readme.txt
Software\Visio\b+
InstallCompletedOnceA
TRUEA
Finished installing Solution files.(
Reboot Your Computera
Some files could not be updated because they are currently in use by other programs on the system. Files in use will be updated the next time you restart your system.
After rebooting, please see the Readme file for important release notes.A
Remove any disks from their drives, and then click Finish to restart your machine and complete setup. A
NOTEPAD.EXE szReadmePath
Software\Microsoft\Windows\RunOncea
ReadmeA
Setup is unable to restart your computer. To enable full product funtionality, you will need to close any open applications and manually restart your computer.A
Software\Microsoft\Windows\RunOncea
ReadmeA
Stringsa
FinishedMsgR
You can find your new shapes in the
following Visio directory:
For more information about other Visio
products, visit us on the World Wide Web
at http://%s.
Stringsa
FinishedTitleR
Setup Is Complete.
NONE(
$(WEB_SITE)A
Visio Solution Readme(
Do you want to view the README file now?A
NOTEPAD.EXEbe
Windows!
WindowsNT!
Windows95!
Win32s!
Setup was unable to retrieve your Operating System
type, or installation of this product onto your
current Operating System is not supported.
Exiting...
Visio32.exeRS
Vistst32.exeRS
Visio.iniR
TemplatePath
StencilPath
AddonsPath
HelpPath
SamplesPath
applicationb
applicationb
32BIT(
NONE(
NONE(
unset
Software\Visio\Visio Professional
Software\Visio\Visio Technical
Software\Visio\Visio Standard
Software\Visio\Visio Professional and Technical
Visio Technical!
Visio Professional!
InstallDir2
Vistst32.exeR
Visio32.exeR
Visio32.exeR
none!
Searching for a valid Visio installation...A
Visio32.EXEA
Vistst32.EXEA
none!
Vistst32.EXE!
Searching for a valid Visio installation...A
Visio!
Visprotk.dll
Visio Technical!
Vistk32.dll
Visio Professional!
Vispro32.dll
Flagsa
UseDefaultDirNamesR
TRUE!
\VisRes32.dll
Extras32.dll
Visio
$(DOCS_DIR)A
$(HELP_DIR)A
$(SAMPLES_DIR)A
$(SOLUTIONS_DIR)A
$(VISIOEXTRAS_DIR)A
Solutions
Samples$
Solutionsa
Visio Extras
$(DOCS_DIR)A
$(HELP_DIR)A
$(SAMPLES_DIR)A
$(SOLUTIONS_DIR)A
$(VISIOEXTRAS_DIR)A
Solutions
Samples$
Solutionsa
Visio Extras
$(DOCS_DIR)A
$(HELP_DIR)A
$(SAMPLES_DIR)A
$(SOLUTIONS_DIR)A
$(VISIOEXTRAS_DIR)A
Loesungen
Hilfe
Dokumente
Beispiel$
Loesungena
Visio-Extras
$(DOCS_DIR)A
$(HELP_DIR)A
$(SAMPLES_DIR)A
$(SOLUTIONS_DIR)A
$(VISIOEXTRAS_DIR)A
Solutions
Exemples$
Solutionsa
Suppl Visio
$(DOCS_DIR)A
$(HELP_DIR)A
$(SAMPLES_DIR)A
$(SOLUTIONS_DIR)A
$(VISIOEXTRAS_DIR)A
Visio
$(DOCS_DIR)A
$(HELP_DIR)A
$(SAMPLES_DIR)A
$(SOLUTIONS_DIR)A
$(VISIOEXTRAS_DIR)A
Solutions
Samples$
Solutionsa
Visio Extras
$(DOCS_DIR)A
$(HELP_DIR)A
$(SAMPLES_DIR)A
$(SOLUTIONS_DIR)A
$(VISIOEXTRAS_DIR)A
SOFTWARE\Microsoft\Windows\Help%
HelpRegistrationa
SolutionHelpR
HelpRegistrationa
SolutionCNTR
Flagsa
UpdateHelpTableOfContentsR
TRUE!
Help Registrationa
CntToUpdateR
HelpRegistrationa
GIDFileR
HelpRegistrationa
CNTLine1R
HelpRegistrationa
CNTLine2R
*.GID
\visio.hlp
winhlp32.exeb
System
Visio.bin
edit(
SETUPSTR862R
Disk Space0
temp.txt
temp.txt
In function '%s':
Unable to create dialog.
Make sure the _ISRES.DLL is in _SETUP.LIB.
Errorb
_sdSIZEa
%s-%ldb
\Software\Microsoft\Windows\CurrentVersion,
\Software\Microsoft\Windows NT\CurrentVersion,
USER!
RegisteredOwner2
RegisteredOrganization2
SdRegisterUserEx!
ResultA
szNameA
szCompanyA
szSerialA
SdRegisterUserEx!
szNameA
szCompanyA
szSerialA
ResultA
SdRegisterUser!
ResultA
szNameA
szCompanyA
SdRegisterUser!
szNameA
szCompanyA
ResultA
SdConfirmRegistration!
ResultA
SdConfirmRegistration!
ResultA
SdConfirmNewDir!
ResultA
SdConfirmNewDir!
ResultA
SdAskDestPath!
ResultA
szDirA
SdAskDestPath!
szDirA
ResultA
SdWelcome!
ResultA
SdWelcome!
ResultA
SdShowInfoList!
ResultA
SdShowInfoList!
ResultA
SdSelectFolder!
ResultA
szFolderA
SdSelectFolder!
szFolderA
ResultA
SdSetupType!
ResultA
szDirA
SdSetupType!
szDirA
ResultA
SdShowAnyDialog!
ResultA
SdShowAnyDialog!
ResultA
SdDisplayTopics!
ResultA
SdDisplayTopics!
ResultA
SdShowMsg!
SdShowMsg/
_sdRECTa
_sdRECTa
bottom2
SdAskOptionsList!
ResultA
ComponentA
SdAskOptionsList!
ComponentA
ResultA
SdShowFileMods!
ResultA
nSelectionA
SdShowFileMods!
nSelectionA
ResultA
SdShowDlgEdit1!
ResultA
szEdit1A
SdShowEdit1!
szEdit1A
ResultA
SdShowDlgEdit2!
ResultA
szEdit1A
szEdit2A
SdShowEdit2!
szEdit1A
szEdit2A
ResultA
SdShowDlgEdit3!
ResultA
szEdit1A
szEdit2A
szEdit3A
SdShowEdit3!
szEdit1A
szEdit2A
szEdit3A
ResultA
SdAskOptions!
ResultA
ComponentA
SdAskOptions!
ComponentA
ResultA
SdComponentDialogAdv!
ResultA
ComponentA
szDirA
SdComponentDialogAdv!
szDirA
ComponentA
ResultA
SdComponentMult!
ResultA
ComponentA
SdComponentMult!
ComponentA
ResultA
SdOptionsButtons!
ResultA
SdOptionsButtons!
ResultA
SdBitmap!
ResultA
SdBitmap!
ResultA
SdComponentDialog2!
ResultA
ComponentA
SdComponentDialog2!
ComponentA
ResultA
SdComponentDialogEx
SdComponentDialogEx!
SdComponentDialog!
ResultA
ComponentA
szDirA
SdComponentDialog!
szDirA
ComponentA
ResultA
SdLicense!
ResultA
ResultA
SdStartCopy!
ResultA
ResultA
SdFinishReboot!
ResultA
BootOptionA
ResultA
BootOptionA
ResultA
ResultA
BootOptionA
SdFinish!
ResultA
bOpt1A
bOpt2A
ResultA
bOpt1A
bOpt2A
DisplayTextR
DisplayDescR
%s_%db
DisplayTextR
%s_%db
File%dB
Copying files...
PROGRAM(
STARTUP(
DESKTOP(
$(STAGE_DIR)!
Depend1R
DisplayTextR
Depend%dB
File%dB
FLAGS2
Compress2
CompToR
Data.Z
Verification2
FLAGS2
Redist2
SelfRegister2
UnRegOld2
HelpReg2
IconR
ICONSb
Redist2
SelfRegister2
UnRegOld2
HelpReg2
$(\n)A
$(INSTALL_DIR)A
$(PROGRAM_FILES_DIR)A
$(WINSYS)A
$(WIN)A
MISCa
ReadmePathR
386vm.dllR
386vm.dlla
Registrationa
License1R
EXTRAS32.DLL
Product Registrationa
Please enter your name, the company you work for, and the 17 or 18 character serial number printed on your product registration card and CD packaging. Type exactly what is printed, including hyphen marks.R
The serial number that you have entered is not valid for this product.
Please check your product packaging to ensure that you typed the
serial number correctly. aU
Only the serial number provided with the current product will unlock this software.
Fatal Install Error: Setup is unable to verify the serial number you have entered.
Refer to the Introducing Visio Network Equipment Guide for more information and instructions.
(.txt)