World of A1200/World_Of_A1200.iso/c/zipv0.92.doc.pp

Text File | 1995-02-27 | 24KB | 572 lines

ZIP(1)              UNIX Programmer's Manual               ZIP(1)



NAME
     zip - package and compress (archive) files

SYNOPSIS
     zip [ -cdefghijklmnoqrsuwyz ] [ -b path ] [ -t mmddyy ] zip-
     file list [ -x list ]

DESCRIPTION
     Zip is a compression and file packaging utility for Unix,
     MSDOS, OS/2, and VMS.  It is analogous to a combination of
     tar and compress and is compatible with PKZIP (Phil Katz
     ZIP) for MSDOS systems.

     There is a companion to Zip called UnZip (of course) which
     you should be able to find the same place you got Zip. Zip
     and UnZip can work with files produced by PKZIP under MSDOS,
     and PKZIP and PKUNZIP can work with files produced by Zip.

     Zip puts one or more compressed files into a single "zip
     file" along with information about the files, including the
     name, path if requested, date and time last modified, pro-
     tection, and check information to verify the fidelity of
     each entry.  Zip can pack an entire directory structure in a
     zip file with a single command.  Compression ratios of 2:1
     to 3:1 are common for text files.  Zip has two compression
     methods, implosion and shrinking, and automatically chooses
     the better of the two for each file to be compressed.

     Zip is useful for packaging a set of files to send to some-
     one or for distribution; for archiving or backing up files;
     and for saving disk space by temporarily compressing unused
     files or directories.

HOW TO INSTALL ZIP

    *** AmyZIP ***
    *
    * If you are reading this, then you've already unarchived
    * the files... Simply copy ZIP to someplace in your command
    * search path (c: is a logical place). Ship and ZipNote
    * will probably not be necessary so you may discard these
    * executables.
    *
    * Read over the documentation, readme's, contents, etc. so
    * you understand what you have, how it works, and how this
    * version of ZIp may differ from the Unix model.
    *
    * If you wish to hack on the source code, you'll need the
    * source, of course, SAS C v5.10b, and the PD "Make" program
    * (LMK may work acceptably well, we haven't tried it).
    * To increment version numbers you'll need to edit the
    * ZIP.C source, (search for "92"). Please furnish Steve
    * Lewis and Ross Martin any of your completed source code
    * modifications so we don't reinvent the wheel.
    *
    *************


     Zip is distributed as C source code that can be compiled on
     a wide range of Unix machines, VAXes running VMS, and MSDOS
     machines using Microsoft or Borland C++, and OS/2 machines
     using Microsoft C.  You will need Unzip (under Unix, MSDOS,
     or VMS) or PKUNZIP (under MSDOS) to unpack the distribution
     file, zip10.zip.

     First, unpack the source as follows, assuming that you have
     zip10.zip in the current directory:

          mkdir zipsrc
          cd zipsrc
          unzip ../zip10

     This extracts all source files and documentation in the
     directory called "zipsrc". You then do:


          make system

     where "system" is one of: bsd, bsdold, sysv, next, next10,
     sun, hpux, dnix, cray, 3b1, zilog, aux, convex, aix, or
     minix.  If you are using a NeXT running version 2.0 or
     greater, then make next.  If you are using 1.0, then make
     next10.  If you are using Sun OS 4.x, then make sun.  If you
     are using HPUX, then make hpux.  The other special systems
     are DNIX 5.2 or 5.3, Cray Unicos, AT&T 3B1 (also known as
     Unix PC or PC 7300), Zilog Zeus, A/UX, Convex, AIX, and
     MINIX.  Otherwise, if you are using BSD Unix, try bsd.  If
     the linker cannot find _memset or _memcpy, try bsdold.  If
     you are using System V Unix or SCO Unix, try sysv.  Also use
     sysv on a Silicon Graphics (SGI) machine.  You can also
     cross-compile Zip for MSDOS under SCO 386 Unix using "make
     scodos".

     If none of these compiles, links, and functions properly on
     your Unix system, see the section BUGS below for how to get
     help.

     If the appropriate system was selected, then the executable
     "zip" will be created.  You can move the executable "zip" to
     an appropriate directory in the search path using a command
     like:

          mv zip ~/bin

     or

          mv zip /usr/local/bin

     You can use the command "set" to see the current search
     path.  If you are using the C-Shell (csh), enter the com-
     mand:

          rehash

     so csh can find the new command in the path.  You are now
     ready to use Zip.

     You can also move the manual page (the raw form of what
     you're reading) to where the Unix man command can find it
     (assuming you have the necessary privileges):

          mv zip.1 /usr/man/man1

     You can get rid of the now unnecessary source and object
     files with:

          cd ..
          rm -r zipsrc

     This will remove the directory zip and its contents created
     by unzip.  You should keep the zip10.zip file around though,
     in case you need to build it again or want to give it to a
     colleague.

     The steps for installation under MSDOS, OS/2, and VMS are
     similar to the above: first unzip the distribution files
     into their own directory.  Then under MSDOS do one of:

          make makefile.msc
          make -fmakefile.bor


     for Microsoft or Borland C++, respectively.  Under OS/2:

          nmake -f makefile.os2

     for Microsoft C 6.00.  Under VAX VMS:


          @makevms

     The installation process will also compile and link several
     other utilities.  They are zipcloak for encrypting and
     decrypting zip files, zipnote for editing zip file comments,
     zipsplit for splitting a zip file into several zip files,
     and ship for sending zip files or any other binary file via
     electronic mail.  For command help on any of the zip* utili-
     ties, simply enter the name with no arguments.  For help
     with ship, enter "ship -h".

HOW TO USE ZIP
     The simplest use of Zip is as follows:

          zip stuff *

     This will create the file "stuff.zip" (assuming it does not
     exist) and put all the files in the current directory in
     stuff.zip in a compressed form.  The .zip suffix is added
     automatically, unless that file name given contains a dot
     already.  This allows specifying suffixes other than ".zip".

     Because of the way the shell does filename substitution,
     files that start with a "." are not included.  To include
     those as well, you can:

          zip stuff .* *

     Even this will not include any subdirectories that are in
     the current directory.  To zip up an entire directory, the
     command:

          zip -r foo foo

     will create the file "foo.zip" containing all the files and
     directories in the directory "foo" that is in the current
     directory.  The "r" option means recurse through the direc-
     tory structure.  In this case, all the files and directories
     in foo are zipped, including the ones that start with a ".",
     since the recursion does not use the shell's file-name sub-
     stitution.  You should not use -r with the name ".*", since
     that matches ".." which will attempt to zip up the parent
     directory--probably not what was intended.

     You may want to make a zip file that contains the files in
     foo, but not record the directory name, foo.  You can use
     the -j (junk path) option to leave off the path:

          zip -j foo foo/*

     The -y option (only under Unix) will store symbolic links as
     such in the zip file, instead of compressing and storing the
     file referred to in the link.

     You might be zipping to save disk space, in which case you
     could:

          zip -rm foo foo

     where the "m" option means "move".  This will delete foo and
     its contents after making foo.zip.  No deletions will be
     done until the zip has completed with no errors.  This
     option is obviously more dangerous and should be used with
     care.


     If the zip file already exists, these commands will replace
     existing or add new entries to the zip file.  For example,
     if you were really short on disk space, you might not have
     enough room simultaneously to hold the directory foo and the
     compressed foo.zip.  In this case, you could do it in steps.
     If foo contained the subdirectories tom, dick, and harry,
     then you could:

          zip -rm foo foo/tom
          zip -rm foo foo/dick
          zip -rm foo foo/harry

     where the first command would create foo.zip, and the next
     two would add to it.  At the completion of each zip command,
     the directory just zipped would be deleted, making room in
     which the next Zip command could work.

MODIFYING EXISTING ZIP FILES
     When given the name of an existing zip file with the above
     commands, Zip will replace identically named entries in the
     Zip file or add entries for new names.  For example, if
     foo.zip exists and contains foo/file1 and foo/file2, and the
     directory foo contains the files foo/file1 and foo/file3,
     then:

          zip -r foo foo

     will replace foo/file1 in foo.zip and add foo/file3 to
     foo.zip.  After this, foo.zip contains foo/file1, foo/file2,
     and foo/file3, with foo/file2 unchanged from before.

     When changing an existing zip file, Zip will write a tem-
     porary file with the new contents, and only replace the old
     one when the zip has completed with no errors.  Also, the
     two methods, shrink and implode, create temporary files that
     are deleted after each file is zipped.  You can use the -b
     option to specify a different path (usually a different dev-
     ice) to put the temporary files in.  For example:

          zip -b /tmp stuff *

     will put the temporary zip file and the temporary compres-
     sion files in the directory "/tmp", copying over stuff.zip
     in the current directory when done.

     If you are only adding entries to a zip file, not replacing,
     and the -g option is given, then Zip grows (appends to) the
     file instead of copying it.  The danger of this is that if
     the operation fails, the original zip file is corrupted and
     lost.

     There are two other ways to change or add entries in a zip
     file that are restrictions of simple addition or replace-
     ment.  The first is -u (update) which will add new entries
     to the zip file as before but will replace existing entries
     only if the modified date of the file is more recent than
     the date recorded for that name in the zip file.  For exam-
     ple:

          zip -u stuff *

     will add any new files in the current directory, and update
     any changed files in the zip file stuff.zip.  Note that Zip
     will not try to pack stuff.zip into itself when you do this.
     Zip will always exclude the zip file from the files on which
     to be operated.

     The second restriction is -f (freshen) which, like update,
     will only replace entries with newer files; unlike update,
     will not add files that are not already in the zip file.
     For this option, you may want to simply freshen all of the
     files that are in the specified zip file.  To do this you
     would simply:

          zip -f foo

     Note that the -f option with no arguments freshens all the
     entries in the zip file.  The same is true of -u, and hence
     "zip -u foo" and "zip -f foo" both do the same thing.

     This command should be run from the same directory from
     which the original zip command was run, since paths stored
     in zip files are always relative.

     Another restriction that can be used with adding, updating,
     or freshening is -t (time), which will not operate on files
     modified earlier than the specified date.  For example:

          zip -rt 120791 infamy foo

     will add all the files in foo and its subdirectories that
     were last modified on December 7, 1991, or later to the zip
     file infamy.zip.

     Also, files can be explicitly excluded using the -x option:

          zip -r foo foo -x \*.o

     which will zip up the contents of foo into foo.zip but
     exclude all the files that end in ".o".  Here the backslash
     causes Zip to match file names that were found when foo was
     searched.

     The last operation is -d (delete) which will remove entries
     from a zip file.  An example might be:

          zip -d foo foo/tom/junk foo/harry/\* \*.o

     which will remove the entry foo/tom/junk, all of the files
     that start with "foo/harry/", and all of the files that end
     with ".o" (in any path).  Note that once again, the shell
     expansion has been inhibited with backslashes, so that Zip
     can see the asterisks. Zip can then match on the contents of
     the zip file instead of the contents of the current direc-
     tory.

     Under MSDOS, -d is case sensitive when it matches names in
     the zip file.  This allows deleting names that were zipped
     on other systems, but requires that the names be entered in
     upper case if they were zipped on an MSDOS system, so that
     the names can be found in the zip file and deleted.

MORE OPTIONS
     As mentioned before, Zip will use the best of two methods:
     shrink or implode.  Usually implode is better, but sometimes
     shrink is better, especially for smaller files.  Sometimes
     neither method produces a packed version smaller than the
     original file, in which case it is stored in the zip file
     with no compression (called the "store" method).

     The option -s (shrink) will force Zip always to use shrink
     or store, and the -i (implode) option forces Zip to use
     implode or store.  Shrinking is faster than imploding, and
     so -s might be used when speed is more important than
     optimal compression.  Implode only (-i) might be used when
     the unzipper for which the zip file is destined can only
     handle implosion.  An example of this is the PKSFXjr program
     that comes with PKZIP.  Also, -i is slightly faster than
     imploding and shrinking at the same time.  For example:

          zip -rs foo foo

     will zip up the directory foo into foo.zip using only shrink
     or store.  The speed of implosion can also be controlled
     with options -0 (fastest method but less compression) to -9
     (best compression but slower). The default value is -5. For
     example:

          zip -r0 foo foo

     In nearly all cases, a file that is already compressed can-
     not be compressed further by Zip, or if it can, the effect
     is minimal.  The -n option prevents Zip from trying to
     compress files that have the suffixes: .Z, .zip, .zoo, or
     .arc.  Such files are simply stored (0% compression) in the
     output zip file, so that Zip doesn't waste its time trying
     to compress them.  If the environment variable NOZIP is set,
     then the suffixes listed there are used instead of the
     default list.  The suffixes are separated by either colons
     or semicolons.  For example, in Unix csh:

          setenv NOZIP .Z:.zip:.tiff:.gif:.snd
          zip -rn foo foo

     will put everything in foo into foo.zip, but will store any
     files that end in .Z, .zip, .tiff, .gif, or .snd without
     trying to compress them.  (Image and sound files often have
     their own specialized compression methods.)  If the environ-
     ment variable NOZIP exists but is empty or contains just a
     colon or semicolon, then zip -n will store all the entries
     and do no compression.

     Under Unix and under OS/2 (if files from a HPFS are stored),
     Zip will store the full path (relative to the current path)
     and name of the file (or just the name if -j is specified)
     in the zip file along with the Unix attributes, and it will
     mark the entry as made under Unix.  If the zip file is
     intended for PKUNZIP under MSDOS, then the -k (Katz) option
     should be used to attempt to convert the names and paths to
     conform to MSDOS, store only the MSDOS attribute (just the
     user write attribute from Unix), and mark the entry as made
     under MSDOS (even though it wasn't).

     The -o (older) option will set the "last modified" time of
     the zip file to the latest "last modified" time of the
     entries in the zip file.  This can be used without any other
     operations, if desired.  For example:

          zip -o foo


     will change the last modified time of foo.zip to the latest
     time of the entries in foo.zip.

     The -e and -c options operate on all files updated or added
     to the zip file.  Encryption (-e) will prompt for a password
     on the terminal and will not echo the password as it is
     typed (if stderr is not a TTY, Zip will exit with an error).
     New zip entries will be encrypted using that password.  For
     added peace of mind, you can use -ee, which will prompt for
     the password twice, checking that the two are the same
     before using it.

     One-line comments can be added for each file with the -c
     option.  The zip file operations (adding or updating) will
     be done first, and you will then be prompted for a one-line
     comment for each file.  You can then enter the comment fol-
     lowed by return, or just return for no comment.

     The -z option will prompt you for a multi-line comment for
     the entire zip file.  This option can be used by itself, or
     in combination with other options.  The comment is ended by
     a line containing just a period, or an end of file condition
     (^D on Unix, ^Z on MSDOS, OS/2, and VAX/VMS).  Since -z
     reads the lines from stdin, you can simply take the comment
     from a file:

          zip -z foo < foowhat

     The -q (quiet) option eliminates the informational messages
     and comment prompts while Zip is operating.  This might be
     used in shell scripts, for example, or if the zip operation
     is being performed as a background task ("zip -q foo *.c
     &").

     Zip can take a list of file names to operate on from stdin
     using the - option.  In Unix, this option can be used with
     the find command to extend greatly the functionality of Zip.
     For example, to zip up all the C source files in the current
     directory and its subdirectories, you can:

          find . -type f -name "*.[ch]" -print | zip source -

     Note that the pattern must be quoted to keep the shell from
     expanding it.

     Under VMS only, the -w option will append the version number
     of the files to the name and zip up multiple versions of
     files.  Without -w, Zip will only use the most recent ver-
     sion of the specified file(s).

     If Zip is run with no arguments or with the -h option, the
     license and the command-argument and option help is shown.
     The -l option just shows the license.

ABOUT PATTERN MATCHING
     (Note: this section applies to Unix.  Watch this space for
     details on MSDOS and VMS operation.)

     The Unix shell (sh or csh) does filename substitution on
     command arguments.  The special characters are ?, which
     matches any single character; * which matches any number of
     characters (including none); and [] which matches any char-
     acter in the range inside the brackets (like [a-f] or
     [0-9]).  When these characters are encountered (and not
     escaped with a backslash or quotes), the shell will look for
     files relative to the current path that match the pattern,
     and replace the argument with a list of the names that
     matched.

     Zip can do the same matching on names that are in the zip
     file being modified or, in the case of the -x (exclude)
     option, on the list of files to be operated on, by using
     backslashes or quotes to tell the shell not to do the name
     expansion.  In general, when Zip encounters a name in the
     list of files to do, it first looks for the name in the file
     system.  If it finds it, it then adds it to the list of
     files to do.  If it does not find it, it will look for the
     name in the zip file being modified (if it exists), using
     the pattern matching characters above, if any.  For each
     match, it will add that name to the list of files to do.
     After -x (exclude), the names are removed from the to-do
     list instead of added.

     The pattern matching includes the path, and so patterns like
     \*.o match names that end in ".o", no matter what the path
     prefix is.  Note that the backslash must precede every spe-
     cial character (i.e. ?*[]), or the entire argument must be
     enclosed in double quotes ("").

     In general, using backslash to make Zip do the pattern
     matching is used with the -f (freshen) and -d (delete)
     options, and sometimes after the -x (exclude) option when
     used with any operation (add, -u, -f, or -d).  Zip will
     never use pattern matching to search the file system.  If
     Zip has recursed into a directory, all files (and all direc-
     tories) in there are fair game.

COPYRIGHT
     Copyright (C) 1990,1991 Mark Adler, Richard B. Wales, and
     Jean-loup Gailly.  Permission is granted to any individual
     or institution to use, copy, or redistribute this software
     so long as all of the original files are included unmodi-
     fied, that it is not sold for profit, and that this copy-
     right notice is retained.

ACKNOWLEDGEMENTS
     Thanks to R. P. Byrne for his Shrink.Pas program which
     inspired this project, and from which the shrink algorithm
     was stolen; to Phil Katz for making the zip file format,
     compression format, and .ZIP filename extension all public
     domain; to Keith Petersen for providing a mailing list and
     ftp site for the INFO-ZIP group to use; and most impor-
     tantly, to the INFO-ZIP group itself (listed in the file
     infozip.who) without whose tireless testing and bug-fixing
     efforts a portable Zip would not have been possible.
     Finally we should thank (blame) the INFO-ZIP moderator,
     David Kirschbaum for getting us into this mess in the first
     place.

SEE ALSO
     unzip(1), tar(1), compress(1)

BUGS
     Versions of PKUNZIP before 1.1 have a bug that on rare occa-
     sions will prevent it from unzipping files produced by Zip
     or PKZIP 1.1.  If you experience such problems, we recommend
     that you get PKUNZIP 1.1 or the portable Unzip, neither of
     which have this problem.

     Under MSDOS, Zip will find hidden and system files, but not
     set the attributes appropriately in the zip file so that
     Unzip can restore them.  This will be fixed in the next
     version.

     Under VMS, not all of the odd file formats are treated prop-
     erly.  Only stream-LF format zip files are expected to work
     with Zip.  Others can be converted using Rahul Dhesi's BILF
     program.  The next version of Zip will handle some of the
     conversion internally.

     LIKE ANYTHING ELSE THAT'S FREE, ZIP AND ITS ASSOCIATED UTIL-
     ITIES ARE PROVIDED AS IS AND COME WITH NO WARRANTY OF ANY
     KIND, EITHER EXPRESSED OR IMPLIED. IN NO EVENT WILL THE
     COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES RESULTING FROM
     THE USE OF THIS SOFTWARE.

     That having been said, please send any problems or comments
     via email to the Internet address [e-mail].  For
     bug reports, please include the version of Zip, the make
     options you used to compile it, the machine and operating
     system you are using, and as much additional information as
     possible.  Thank you for your support.

    *AMYZIP caveates*

    Anything which relies on a time or datestamp *may* behave
    unpredictably in v.92 - be careful!