home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
What the Doctor Required - The Freshest December
/
December.iso
/
drivers
/
stoscs
/
trm390
/
readme.95
next >
Wrap
Text File
|
1996-02-11
|
3KB
|
109 lines
Windows 95 Drivers
This file provides driver installation procedures for Windows 95. There are
two other driver files under the \WIN95 directory of the driver diskette:
=> TRM390.MPD
=> SCSI.INF
< Installing Windows 95 together with DC-390's driver >
The following procedures are for Windows 95 that is not installed:
1. Insert the Microsoft Windows 95 Startup Disk into drive "A" of the computer
for installing the Windows 95 System.
Notes: If your boot device already has DOS system, then boot the system
from this bootable device and go next to setp 3 of < Adding a DC-390
Host Adapter > in the next section
2. Partition and format the hard disk, if your hard disk is not partitioned yet.
3. Run "setup.exe" to install Windows 95 System from CD-ROM drive or diskette.
3.1 For Windows 95 CD-ROM Version, the setup.exe is located on directory
\WIN95
3.2 For Windows 95 floppy diskeete, insert Setup disk #1
4. Follow the instructions of setup to install Windows 95
5. After finishing the installation, open the Control Panel to add the DC-390
PCI SCSI Adapter.
To open the Control Panel, click the Start button, point to Settings, and
then click Control Panel.
OR
To click the My-Computer icon, and click the Control Panel.
6. Click the "Add New Hardware" icon, and click "Next" button.
7. Click "Install specific hardware" and select "SCSI controller" from the
Hardware type list.
Click the "Next" buuton
8. Click "Have Disk" button. The next scrren will show:
"Install From Disk" menu
Insert the diskette, which contains the TRM390.MPD and SCSI.INF, into
drive A: and change the path to "A:\WIN95".
Click "OK" button
9. The next screen will show:
Models: Tekram DC-390 PCI SCSI Adapter
Click the "Next" button
10. The next screen will show:
The hardware you are installing is Plug and Play compatible.
Click "Next" button
11. The next screen whill shows:
Copy files....
Click "Finish" button
12. Click "System" icon in Control Panel, and click "Device Manager" item in
"System Properties" menu.
13. Click "SCSI controller" to select device.
Select "AMD PCI SCSI Controller" and click "Properties" button.
14. Select "Driver" in "AMD PCI SCSI Controller Properties" menu and click
"Change Driver" button.
15. The next screen will show:
"Select Device" menu.
Select "Tekram DC-390 PCI SCSI Adapter" and click "OK" button.
16. Click "OK" and reboot the system.
< Adding a DC-390 Host Adapter >
1. Plug the DC-390 PCI SCSI Adapter into your computer.
2. Reboot and Start the Windows 95 system.
3. Windows 95 will automatically detect the DC-390 PCI SCSI Adapter and
install driver for DC-390.
Note: Since the DC-390 PCI SCSI Adapter use the AMD SCSI Chip the
Windows 95 will find it as AMD SCSI controller and install AMD
SCSI device driver.
4. After Windows 95 install AMD SCSI device driver, you'd need to change the
AMD device driver to Tekram DC-390 SCSI device driver.
The procedure to change it is the same as that of < Installing Windows 95
together with DC-390's driver > => from step 5 to 16.