Doom I/II Collection/DM12.ISO/mixed/forest20/howto.txt

Text File | 1994-05-25 | 14KB | 297 lines

========================== additional note =============================

    When I wrote the following text, DEU 5.21 was not available yet.
Keep in mind that you may be able to do all of what I describe by
using only DEU 5.21 with the X, I, R and G command. All you need it
to put the modified GIF file in DOOM.WAD with DMGRAPH, extract it to
a raw file with DEU's X command, put the original graphic back in
DOOM.WAD, load your map in DEU, the include the modified graphic with
the I command, then read the graphic in the PWAD with the R command
and lastly, group the two PWADs with the G command. You may include
as many PWADS as you want (DEMOS too), but DEU has a limit of 12 open
files at a time. You'll have to group the PWADs in seperate DEU sessions
if you have more than 12.

========================================================================


Hi,
    I'm the author of FOREST.WAD (get FORESTxx.ZIP on many sites), and
am also a beta tester of DEU. When I released FOREST 1.1, I was the
first (to my knowledge) to release a PWAD that included new graphics
and new demos. I thought it would be nice for other DOOMers to be able
to do what I did, so I will try to explain how I did it in a simple
language. I will include BATCH files and DIR files so that you can
use them as examples to do it.

**********
Before I begin, this is VERY IMPORTANT, WAD MASTER PUTS AN IWAD MARKER
AT THE BEGINNING OF THE PWAD FILE, PLEASE, PLEASE, PLEASE, BEFORE
UPLOADING ANY NEW WADS CREATED USING IT, CHANGE THE "I" TO A "P" BEFORE
WITH ANY HEX EDITOR. This is probably because it was written before
ID released information (or someone else) about the IWAD-PWAD formats.
**********


You will need these files:

WT100.ZIP (Wad tools 1.0) to view the graphics in the DOOM.WAD file
              and find the name of the texture you want to change.

DMGRAP10.ZIP (Doom graph 1.0) to extract and store a GIF file to/from
              the DOOM.WAD file.

DMAUD11.ZIP (Doom audio 1.1) to extract and store audio files to/from
              the DOOM.WAD file (I didn't do it, but you could also
              include new sounds in a PWAD file)

WDMSTR05.ZIP (Wad Master 1.0) to extract the raw data from your new
              levels and the modified textures or sound from the
              DOOM.WAD file.


How does it all come together?
   Once you have created your level with DEU (or any other editor)
decide what texture you want to change, find out what it's name is in
the DOOM.WAD file with WT and extract it with DMGRAPH. For example if
you want to change the SP_DUDE2 texture, you will find with WT that
it's name is WALL50_2, so use the command "DMGRAPH WALL50_2 -e file.gif".
You will want to check the insertion point for when you put the modified
graph back in with "DMGRAPH WALL50_2 -v". Once you have the GIF, do what
you want (I used PhotoFinish to edit it), store it back in DOOM.WAD
with the command "DMGRAPH WALL50_2 -s newfile.gif -i 63,123" (make a
copy of it first to be able to put back the original in) so that you can
extract the RAW file with WAD Master.

    To use WadMaster, you need to create a reference DIR file with
WADDIR. If your new map is called "NEWMAP", and we want the
dir file to be NEWMAP.DIR then type:
"WADDIR NEWMAP.WAD >MEWMAP.DIR". Once you have the DIR file, you must
edit it so that seperate entries (levels, if you have more than one
level) do not go in the same directory. Look at the first few lines
(without the comment), they will be like this:
E1M1\                    E1M1\                   0
THINGS                   THINGS                  10
LINEDEFS                 LINEDEFS                952

you must add a dospath to the first column like this:
E1M1\                    E1M1\                   0
E1M1\THINGS              THINGS                  10
E1M1\LINEDEFS            LINEDEFS                952

(make sure the column 2 starts at the same place)

Once you've done that, you can extract the raw data to dos files
in a directory, so create a directory (like NEWMAP) and type the command
"UPKWAD -o NEWMAP NEWMAP.DIR NEWMAP.WAD" and this will extract all
the resources in the PWAD map you created to the directory NEWMAP.

OK! now let's put the modified GIF in there! Look at the order in which
the DOOM.WAD directory is (do WADDIR >DOOM.DIR) so that you can put the
new graphic in the proper order (it won't work otherwise). You will want
to copy the NEWMAP.DIR file to an other name, let's say NEWMAP1.DIR and
edit it to add the proper references to it. WALL50_2 is in the P2 section,
so you need to add the folowing lines at the end of the NEWMAP1.DIR file:

P2_START\                P2_START\               0
P2_START\WALL50_2        WALL50_2                17544
P2_END\                  P2_END\                 0

(notice that the DEMO1-3 are just before the E1M1 entry, so you could
put the lines as they apear in DOOM.DIR just before the E1M1 line in
NEWMAP1.DIR and copy any demo lmp for your PWAD to NEWMAP\DEMOx (no LMP
extention). That's how I did it)

Once you've done that, create a WAD DIR file to be able to extract the
raw graphic from DOOM.WAD (after storing the modified GIF, let's call
it NEW50_2.GIF in DOOM.WAD with "DMGRAPH WALL50_2 -s NEW50_2.GIF"). You
will also need to create an other directory, let's say GRAPHIC. So,
create the WAD DIR file like this: (let's call it GRAPHIC.DIR)

P2_START\                P2_START\               0
P2_START\WALL50_2        WALL50_2                17544
P2_END\                  P2_END\                 0

and type the command "UPKWAD -o GRAPHIC.DIR" (it used DOOM.WAD by default)
and you will have a new file in GRAPHIC\P2_START call WALL50_2. I
copied the raw files to an other name, but you don't have to. You can
just copy it like this "COPY GRAPHIC\P2_START\WALL50_2 NEWMAP\P2_START"

Now we're ready to put the new graphic and demos in a PWAD file. So
type the command "PKWAD -o NEWMAP NEWMAP1.DIR TOTAL.WAD". Remember that
you have to use a modified wad dir file (that's why I typre NEWMAP1.DIR
instead of just NEWMAP.DIR) that includes the new files you want
included in the new PWAD file, like the DEMOs, graphic or sound
resources. You can put anything there!

To finish it off, here's a copy of a series of files I used to create
FOREST.WAD, I will not explain them here because you should be able
to figure it out, if not, there is documentation that comes with
Wad master, I figured it out, I'm sure you can.

------------------------- getpics.bat -------------------------------

@echo off
cls
echo Storing new graphics in DOOM.WAD...
dmgraph sky2 -s forest.gif -i 127,123 >nul
dmgraph wall50_2 -s new50_2.gif -i 63,123 >nul
dmgraph mwall5_1 -s new5_1.gif -i 63,123 >nul
dmgraph mwall4_2 -s new4_2.gif -i 63,123 >nul
dmgraph credit -s newcred.gif -i 0,0 >nul
echo Unpacking new graphics to raw files...
upkwad -o graph graph.dir >nul
echo Putting normal graphics back in DOOM.WAD...
dmgraph sky2 -s sky2.gif -i 127,123 >nul
dmgraph wall50_2 -s wall50_2.gif -i 63,123 >nul
dmgraph mwall5_1 -s mwall5_1.gif -i 63,123 >nul
dmgraph mwall4_2 -s mwall4_2.gif -i 63,123 >nul
dmgraph credit -s credit.gif -i 0,0 >nul
echo Copying raw graphics to .pic files...
copy graph\p2_start\sky2 newsky2.pic >nul
copy graph\p2_start\wall50_2 new50_2.pic >nul
copy graph\p2_start\mwall5_1 new5_1.pic >nul
copy graph\p2_start\mwall4_2 new4_2.pic >nul
copy graph\credit newcred.pic >nul

------------------------- graph.dir --------------------------------
# DOOM WAD FILE DIRECTORY LISTING
# LINES STARTING WITH # ARE IGNORED
# EACH LINE CONTAINS DOSFILE WADFILE SIZE
# THIS FILE CAN BE USED TO UNPACK/PACK WAD FILES
# DO NOT CHANGE THE ORDER OF THESE LINES!!!!
# HOWEVER, DELETION IS OKAY
CREDIT                   CREDIT                  68168
P2_START\                P2_START\               0
P2_START\WALL50_2        WALL50_2                17544
P2_START\MWALL4_2        MWALL4_2                17544
P2_START\MWALL5_1        MWALL5_1                17544
P2_START\SKY2            SKY2                    65344
P2_END\                  P2_END\                 0
P_END\                   P_END\                  0
# IN FILE doom.wad THERE ARE 10366184 bytes in 2045 FILES.

------------------------ makejs.bat ---------------------------------
@echo off
cls
echo Creating composite file of all missions...
deu -file e2m1js.wad e2m2js.wad e2m3js.wad <makejs.key >nul
echo Unpacking WAD...
upkwad -o forest forest.dir forest.wad >nul
echo Copying new image files...
copy newsky2.pic forest\p2_start\sky2 >nul
copy new50_2.pic forest\p2_start\wall50_2 >nul
copy new5_1.pic forest\p2_start\mwall5_1 >nul
copy new4_2.pic forest\p2_start\mwall4_2 >nul
copy newcred.pic forest\credit >nul
echo Copying DEMO files...
copy js1.lmp forest\demo2 >nul
copy js2.lmp forest\demo3 >nul
copy js3.lmp forest\demo1 >nul
echo Creating new WAD with DEMO files and new graphics...
pkwad -o forest jsdemos.dir forest.wad >nul

--------------------- makejs.key ---------------------------------
g forest.wad
q

---------------------- forest.dir --------------------------------
# DOOM WAD FILE DIRECTORY LISTING
# LINES STARTING WITH # ARE IGNORED
# EACH LINE CONTAINS DOSFILE WADFILE SIZE
# THIS FILE CAN BE USED TO UNPACK/PACK WAD FILES
# DO NOT CHANGE THE ORDER OF THESE LINES!!!!
# HOWEVER, DELETION IS OKAY
E2M1\                    E2M1\                   0
E2M1\THINGS              THINGS                  2720
E2M1\LINEDEFS            LINEDEFS                5684
E2M1\SIDEDEFS            SIDEDEFS                16620
E2M1\VERTEXES            VERTEXES                1352
E2M1\SEGS                SEGS                    6672
E2M1\SSECTORS            SSECTORS                716
E2M1\NODES               NODES                   4984
E2M1\SECTORS             SECTORS                 2418
E2M1\REJECT              REJECT                  1082
E2M1\BLOCKMAP            BLOCKMAP                11942
E2M2\                    E2M2\                   0
E2M2\THINGS              THINGS                  2250
E2M2\LINEDEFS            LINEDEFS                4956
E2M2\SIDEDEFS            SIDEDEFS                14100
E2M2\VERTEXES            VERTEXES                1344
E2M2\SEGS                SEGS                    6372
E2M2\SSECTORS            SSECTORS                744
E2M2\NODES               NODES                   5180
E2M2\SECTORS             SECTORS                 2002
E2M2\REJECT              REJECT                  742
E2M2\BLOCKMAP            BLOCKMAP                11782
E2M3\                    E2M3\                   0
E2M3\THINGS              THINGS                  10
E2M3\LINEDEFS            LINEDEFS                3248
E2M3\SIDEDEFS            SIDEDEFS                9960
E2M3\VERTEXES            VERTEXES                764
E2M3\SEGS                SEGS                    4104
E2M3\SSECTORS            SSECTORS                472
E2M3\NODES               NODES                   3276
E2M3\SECTORS             SECTORS                 1378
E2M3\REJECT              REJECT                  352
E2M3\BLOCKMAP            BLOCKMAP                3624
# IN FILE forest.wad THERE ARE 130850 bytes in 33 FILES.

---------------------------- jsdemos.dir ---------------------------
# DOOM WAD FILE DIRECTORY LISTING
# LINES STARTING WITH # ARE IGNORED
# EACH LINE CONTAINS DOSFILE WADFILE SIZE
# THIS FILE CAN BE USED TO UNPACK/PACK WAD FILES
# DO NOT CHANGE THE ORDER OF THESE LINES!!!!
# HOWEVER, DELETION IS OKAY
DEMO1                    DEMO1                   1000
DEMO2                    DEMO2                   1000
DEMO3                    DEMO3                   1000
E2M1\                    E2M1\                   0
E2M1\THINGS              THINGS                  2720
E2M1\LINEDEFS            LINEDEFS                5684
E2M1\SIDEDEFS            SIDEDEFS                16620
E2M1\VERTEXES            VERTEXES                1352
E2M1\SEGS                SEGS                    6672
E2M1\SSECTORS            SSECTORS                716
E2M1\NODES               NODES                   4984
E2M1\SECTORS             SECTORS                 2418
E2M1\REJECT              REJECT                  1082
E2M1\BLOCKMAP            BLOCKMAP                11942
E2M2\                    E2M2\                   0
E2M2\THINGS              THINGS                  2250
E2M2\LINEDEFS            LINEDEFS                4956
E2M2\SIDEDEFS            SIDEDEFS                14100
E2M2\VERTEXES            VERTEXES                1344
E2M2\SEGS                SEGS                    6372
E2M2\SSECTORS            SSECTORS                744
E2M2\NODES               NODES                   5180
E2M2\SECTORS             SECTORS                 2002
E2M2\REJECT              REJECT                  742
E2M2\BLOCKMAP            BLOCKMAP                11782
E2M3\                    E2M3\                   0
E2M3\THINGS              THINGS                  10
E2M3\LINEDEFS            LINEDEFS                3248
E2M3\SIDEDEFS            SIDEDEFS                9960
E2M3\VERTEXES            VERTEXES                764
E2M3\SEGS                SEGS                    4104
E2M3\SSECTORS            SSECTORS                472
E2M3\NODES               NODES                   3276
E2M3\SECTORS             SECTORS                 1378
E2M3\REJECT              REJECT                  352
E2M3\BLOCKMAP            BLOCKMAP                3624
CREDIT                   CREDIT                  68168
P2_START\                P2_START\               0
2_START\WALL50_2        WALL50_2                17544
2_START\MWALL4_2        MWALL4_2                17544
2_START\MWALL5_1        MWALL5_1                17544
2_START\SKY2            SKY2                    34554
2_END\                  P2_END\                 0
_END\                   P_END\                  0
 IN FILE doomjs.wad THERE ARE 130850 bytes in 33 FILES.