329 You will be asked to enter your registration code when you reach the registration page.\n\nYour registration code is %lu.\n\nIf you wish, you can copy this number to the Clipboard by clicking the Copy button.
330 This copy of Seq-303 has expired.
331 This copy of Seq-303 is not registered.\nIt expires on %B %d, %Y.\n
332 This copy of Seq-303 is not registered.\nThere are %d executions remaining.
640 This copy of Seq-303 will expire after %d more days. If you wish\nto register, select the Register command in the Help menu.
641 This copy of Seq-303 will expire after %d more executions.\nIf you wish to register, select the Register command in the Help menu.
642 This copy of Seq-303 will expire after one more day. If you wish\nto register, select the Register command in the Help menu.
643 This copy of Seq-303 will expire today. If you wish\nto register, select the Register command in the Help menu.
644 The following files could not be found:
645 This file was created by a newer version of Seq-303. It cannot be read by this version.\n\nYou should update to the latest version of Seq-303.
646 This file is not a valid Seq-303 file.
647 The evaluation period for Seq-303 has ended.\n\nYou can continue to use the program, but you will not be able to export MIDI files or sync with other MIDI devices. You can register now, or you can use the Register option in the Help menu at a later date.\n\nDo you want to register this copy of Seq-303 now?
650 The MIDI record buffer is full. Recording has stopped.\n\nYou can increase the size of the record buffer using the Record Buffer\nSize control in the MIDI Files page of the Options property sheet.
654 One or more MIDI outputs could not be opened.
655 Thank you for registering Seq-303!\n\nYou should now save your work and restart the program in order for registration to take effect.
656 Registration failed!\n\nPlease check both the registration code and your registration key and make sure they match the values listed in the confirmation Email message you received.
3000 Set the slider to its minimum value.
3032 Center the slider in its range.
3064 Set the slider to its maximum value.
3080 Force sequence changes to occur only at loop points.
3096 Copy the current sequence to this location.
3112 Copy the specified sequence to the next empty sequence location.
8000 The following line in the NRPN definition file %s contains an error:\n\n%s
8001 The NRPN definition file %s has no instrument name.
8002 The NRPN definition file %s has a bad parameter count.
8003 One or more MIDI inputs or outputs could not be opened. This could be due\nto another application's use of a single-client MIDI driver. Please check any\nother active MIDI or multimedia applications for the use of the following ports:\n\n%s
8004 You are about to shut down the first Techno Toy that you started during this session.\nFor obscure technical reasons, this will cause all other Techno Toys to shut down as well.\n\nDo you wish to shut down all Techno Toys?
8005 The installed version of TechToys.DLL is out of date.\n\nThe installed file is version %d.%d.%d.%d.\nThis program requires version %d.%d.%d.%d or higher.
32771 Send an All Notes Off message.
32773 Send a Reset Controllers message.
32779 Edit comments for the document.
32780 Set the gang buttons for all sliders.
32782 Clear all loop points.
32786 Set the MIDI controllers for the controller pages and assignable slider.
32787 Apply an upward ramp pattern to all ganged sliders.
32788 Apply a downward ramp pattern to all ganged sliders.
32789 Apply an up/down ramp pattern to all ganged sliders.
32790 Apply a down/up ramp pattern to all ganged sliders.
32791 Apply an alternating on/off pattern to all ganged sliders.
32792 Invert all ganged sliders.
32793 Apply a random pattern to all ganged sliders.
32794 Toggle the state of all gang buttons.
32795 Add a slight random variation to all ganged sliders.
32796 Export the most recent performance as a MIDI file.
32797 Automatically export each performance as a MIDI file.
32799 Change the sequencer options.
32800 Reset transposition to zero.
32801 Reset the program bank MSB and LSB to zero.
32803 Force all timebase changes to occur on multiples of the current timebase.
32807 Play each end point twice when looping in Back and Forth mode.
32808 Extend the length of all notes that have glide.
32811 Display the next Tip of the Day.
32813 Always start playback from stage 1.
32814 Clear the gang button for all sliders.
32827 Make ganged slider motion relative.
32828 Make ganged slider motion absolute.
32841 Set metronome options.
32847 Set synchronization options.
32848 Set tranpose options.
32850 Hide the status bar.
32851 Launch another instance of Seq-303 and initialize all settings.
32852 Launch another instance of Seq-303 and open a file.
32853 Launch another instance of Seq-303 and open an existing file.
32902 Access the Techno Toys Home Page through the Web.
32903 Register Seq-303 through the World Wide Web,
32904 Select a MIDI output\nMIDI Output
32905 Copy the most recent performance to the Clipboard.
32907 Insert all rows from the Clipboard.
32908 Insert the Pitch row from the Clipboard.
32909 Insert the Velocity row from the Clipboard.
32910 Insert the first controller row from the Clipboard.
32911 Insert the second controller row from the Clipboard.
32912 Insert the third controller row from the Clipboard.
32916 Force all pitches in the sequence to a specific key\nForce To Key
32917 Enter the registration key for Seq-303.
57344 Seq-303
57345 For Help, press F1
57346 Select an object on which to get Help
57600 Create a new document.\nNew
57601 Open an existing document.\nOpen
57602 Close the active document\nClose
57603 Save the active document.\nSave
57604 Save the active document with a new name.\nSave As
57616 Open this document
57617 Open this document
57618 Open this document
57619 Open this document
57620 Open this document
57621 Open this document
57622 Open this document
57623 Open this document
57624 Open this document
57625 Open this document
57626 Open this document
57627 Open this document
57628 Open this document
57629 Open this document
57630 Open this document
57631 Open this document
57634 Copy the current sequence to the Clipboard.
57664 Display program information, version number and copyright.\nAbout
57665 Quit Seq-303.\nExit
57666 Opens Help\nHelp Topics
57667 List Help topics.\nHelp Topics
57668 Display instructions about how to use help\nHelp
57669 Display help for clicked on buttons, menus and windows\nHelp
57670 Display help for current task or command\nHelp
57680 Switch to the next window pane\nNext Pane
57681 Switch back to the previous window pane\nPrevious Pane
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close the active window and prompts to save the documents
61202 Restore the window to normal size
61203 Activate Task List
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61709 This program requires the file %s, which was not found on this system.
61710 This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
