1 No Acotec products have been found that could be removed with this program. Press "Yes" if you want to continue deleting installation remains of "Acotec ISDN Router" ,"AcoRas driver" and "ConnectGate".
2 Acotec ISDN for Windows NT setup and configuration
3 Are you sure you want to delete the product %s from your computer?
4 You have entered an incorrect serial number or key. Please enter the correct values.
5 This serial number will install a demonstration version of the router. After your computer is restarted your ISDN connections as well as router configuration options are time limited.\nPress 'OK' if you want to continue the installation.\nPress 'Cancel' if you want to enter a different serial number now.
6 An error occured while executing a dialog box. Your system may no longer be stable. Uninstall the software you installed and restart your computer. Install the software again. (" %s " reports errors).
7 The path you entered does not contain all the installation files necessary to install the product. Do you wish to enter the installation path again?
8 Acotec ISDN Multiprotokoll Router installation and configuration
9 Acotec ISDN Internet Router installation and configuration
10 Acotec ISDN RasCapi driver installation and configuration
11 ConecctGate for Windows installation and configuration
12 Acotec installing and configuration tool.\nAcotec GmbH Berlin\n
13 Background picture for this product cannot be found. If you called AcoSetup.EXE from the Acotec directory to install a product that has not been installed yet, please cancel the Acotec Setup program. To install a product please call AcoSetup.EXE from the corresponding installation directory.
14 Installation and configuration
15 The product %s was removed successfully from your computer. Before installing new components you must restart your computer. Do you wish to restart your computer now?
16 Acotec Setup is an installation program for Acotec GmbH products. It is to be started from the installation directory or with a valid product parameter. "ACOMPR" and "ACORAS" are currently valid parameters.
17 Installation directory for
18 The corresponding INF filename for the product could not be found in the registry. Deinstall the product and reinstall it.
19 The reference to the old INF filename is not contained in the registry. The update cannot continue. Choose "Remove" or use the AcoClean.EXE. Reboot the computer and start the installation program again.
20 The 'oemsetup.inf' file for updating cannot be found in the supplied installation directory.
21 Cannot find data file for deleting the Setup files. You might delete the files manually or copy the "DELFILES.DAT" file from the CD to the Acotec AcoSetup directory. After doing so you may use the AcoClean.EXE program to remove the corresponding program.
22 An error occured while trying to restart your computer. Stop the setup program and reboot the computer.
23 You have choosen a different product to be installed or a different language during the initial steps of Acotec Setup. Press 'OK' if you wish to install the %s language instead of the %s language. Otherwise press 'Cancel' and choose a different installation directory.
24 To activate changes you have made, you must restart the computer. Do you wish to restart your computer now?
25 You did not enter a value for the number of channels for X31. If you want to repeat the configuration press ""Yes"". If you press ""No"" X31 will not work on this adapter.\n
26 The setup components of Windows NT are currently active. Finish all input for Windows NT Setup before returning to Acotec Setup.
27 The configuration of your computer has changed. These changes will take effect when the computer is next restarted. Do you wish to restart your computer now?
28 No CAPI ISDN card has been installed. You will not be able to use WAN connections. You may continue with the installation and install an ISDN card later. After the installation of the ISDN card, call the product's configuration interface to configure the WAN connections.
29 There is no ISDN card selected. You will not be able to establish WAN connections. If you wish to select an ISDN card now press "Yes".
30 You may only configure one X31 adapter in this version. If you wish to make an X31 configuration for this adapter press ""Yes"". The X31 configuration of any other adapter will be deleted.
31 You already have default gateway configurations for other LAN adapters. If you wish switch the default gateway from the LAN adapters to the Acotec ISDN Router click ""OK"". Click ""Cancel"" if you wish to change the settings.
32 There are invalid IP addresses in one ore more entry fields. Please change the entries. Each field must contain a valid address.
33 The password and verify password do not match. Please reenter the passwords.
34 You are about to install a test version of the ISDN RasCapi driver. A default standard key is presented as the serial number. This key allows a time limited version of the driver to operate (ten minutes ISDN conneciton and four hours configuration). \n If you wish to enter a different key press 'Cancel' now.
35 The serial number entered belongs to a previous version of the router. All new serial numbers must be prefixed by the letter 'n' (Multiprotocol Router) or the letter 's' (Internet Router). \nIf you wish to enter a different serial number press 'OK'.\nIf you press 'Cancel' the currently installed router version will not be updated.
36 Wanadapter configuration
37 Controller configuration
38 Serial number
39 The file containing installation information for this product could not be found. Run the AcoClean.EXE program (installation disk or Acotec directory) to remove the product. Install the product again after rebooting the computer.
40 Are you sure you wish to reboot the computer now?
41 Are you sure you wish to remove %s from your computer?
42 An error occured while calling SETUP.EXE. Make sure that the program SETUP.EXE exists in the "%SystemRoot%\System32" directory. Acotec Setup will be cancelled.
43 Are you sure you wish to reboot the computer now?
44 An incorrect path was entered to the install files. Enter the correct path to "oemsetup.inf".
45 Are you sure you wish to exit Acotec Setup? You have made configuration changes that will only take effect after the computer is restarted. Click on 'Yes' to restart the computer now. If you click on 'No' the changes you have made will not be in effect. If you wish to make further configuration changes press 'Cancel'.
46 Are you sure you wish to exit Acotec Setup?
47 ConnectGate for Windows will be removed from your computer.
48 Acotec ISDN Router setup
49 The Acotec ISDN AcoRas driver will be removed from your computer.
50 This version of the Acotec ISDN Router may only to be installed on a Windows NT operating system.
51 The Acotec ISDN Router will be removed from your computer.
52 To install the Acotec ISDN Router you need the Windows NT 3.51 or Windows NT 4.0 operating system (Build number equal or higher than 1057).
53 Acotec ISDN setup and configuration
54 The setup components of Windows NT have been activated. Please enter all necessary data and wait until all operations are completed and then return to the Acotec setup.
55 ConnectGate windows will be closed and dependant operations will be stopped.
56 Acotec ISDN AcoRas driver configuration windows and dependant operations will be stopped.
57 Acotec ISDN Router services and dependant operations will be stopped. Configuration windows will be closed.
58 Do you really want to reboot your computer?
59 Setup cannot locate the help file at the moment. Please finish the installation and then try to start the online help again.
60 Your phone number input has wrong characzters. Allowed are characters: '(', ')', '-', '/', '+', '.' and numbers 0 - 9
61 This phonenumber is allready exist in the phonenumberlist. You want replace this entry?
62 Tracefile not yet exist? Produce any trace output and try again.
63 The Acotec ISDN RASCAPI driver has not loaded. The configuration will be change only the registry entries.
64 Acotec ISDN RasCapi configuration
65 This serialkey is exclusiv for a SPEA ISDN card.\nIf you want to repeat the configuration press "Cancel". If you press "OK" the driver will work exclusiv for SPEA ISDN cards.
