home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
PC Direct 1998 November
/
pcdnov98.iso
/
R
/
zdsl
/
javaperk
/
Product
/
Readme.txt
< prev
next >
Wrap
Text File
|
1998-06-18
|
4KB
|
109 lines
J-PERK INSTALL NOTES
Copyright 1996-1998
McWeb Software
_______________________________________________________________________
================
IMPORTANT!!!
================
If you received an error stating:
"A required .DLL file, MSVBVM50.DLL, was not found"
and J-Perk won't run, you must download this file from:
ftp://ftp.simtel.net/pub/simtelnet/win95/dll/vb5rtsp3.zip
Unzip the vb5rtsp3.zip file and run the vb5rtsp3.exe file contained
within it. This file will install the files that J-Perk
needs in order to execute correctly. When it has completed the
installation, then run J-Perk. Our Web site
http://www.mcwebsoftware.com/javaperk/jpfaq.html
has more information about this.
============
INSTALLATION
============
To install run the setup.exe file and follow the
on-screen instructions.
If Setup determines that some of the files are already on
the system, or if the software is installed a second
time, the install progress bar won't always go
to 100%. This is "normal". Also, after the setup
runs there may be an empty button with no caption
on the task bar. Clicking it will make it go away.
This is "normal" too.
If you encounter error messages during installation
which give you the option to "Abort, Ignore, Retry",
first retry, then if that doesn't work choose Ignore
each time it asks you.
When setup completes, it is most likely that J-Perk
will work, but the applets did not install. Find the
applet pack (applets.zip) included with the J-Perk
evaluation zip file and unzip it into your J-Perk
directory. This should do the trick.
Missing DLLs
------------
If the installation doesn't start and you get a message
you're missing MFCxxx.DLL, you do not have some
of the standard Windows support DLL files.
Under Windows 95, this may have happened because
Win95 was installed with Custom or Compact setup
options. You can nudge Win95 to install the needed
DLLs by installing WordPad. From Control Panel,
click Add/Remove Programs. Click the Windows Setup
tab and double-click Accessories. Scroll down to
the bottom of the list and check WordPad. OK your
way out to complete the installation.
=======================
Disclaimer of Warranty
=======================
THIS SOFTWARE AND THE ACCOMPANYING FILES ARE SOLD "AS IS" AND WITHOUT
WARRANTIES AS TO PERFORMANCE OF MERCHANTABILITY OR ANY OTHER WARRANTIES
WHETHER EXPRESSED OR IMPLIED.
Because of the various hardware and software environments into which Web
Weaver may be put, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED.
Good data processing procedure dictates that any program be thoroughly
tested with non-critical data before relying on it. The user must assume
the entire risk of using the program. ANY LIABILITY OF THE SELLER WILL BE
LIMITED EXCLUSIVELY TO PRODUCT REPLACEMENT OR REFUND OF PURCHASE PRICE.
The applets that are included with J-Perk are separate from the sold product.
They have only been included as an extra in this package. The selling price ONLY
reflects the cost of J-Perk, and any additional files have not been included in
the sale price. These applets can be downloaded from the New Media Lab at Sun
Microsystems, Inc.
Special thanks to Eric Harshbarger at Sun Microsystems, Inc. for allowing McWeb
Software to use the applets included in this software package.
_________________________________________________________________________
Please report bugs, comments, suggestions, and to:
info@mcwebsoftware.com
Thank you for your support.
McWeb Software