10000 Gets the number of configurations in the project
10001 Returns the project containing the configurations
10002 Returns a specific configuration by name or index
10003 Represents all the configurations on a specific project
10004 Represents a library or executable program that you can build as part of a project
10005 Returns the name of the configuration as displayed in the FileView
10006 Returns the project containing this configuration
10007 Adds a custom build step to this configuration, which is executed after the configuration is built
10008 Changes the settings of a specified tool, such as the Visual C++ compiler, for all corresponding files in the configuration
10009 Removes settings of a specified tool, such as the Visual C++ compiler, for all corresponding files in the configuration
10010 Represents a group of related files that can include one or more configurations
10011 Returns the set of configurations in this project
10012 Visual Studio 97 Project System
16000 Project Folder
16001 Lib Manager
16002 Source files
16003 "$(OS)" == "Windows_NT"
16004 %1\n\nRemove this project configuration?
16005 %1\n\nNone of the configurations can be dependencies of this configuration.
16006 No Matching Configuration
16007 Project Configuration...
16008 %1\n\nRemove this project?
16009 Cannot create subproject.
16010 Project...
16011 files
16012 The makefile name or some other command line may be specified in\nthe Project Settings dialog. Would you like to go there now?
16013 The custom build setting requires an output file.
16014 FileView
16016 %s\n\nThis project file has read-only attributes. You will not be able to save your changes to this project.
16017 %s\n\nThis project was generated by a previous version of Visual C++. Continuing will convert it to a Developer Studio workspace.
16018 Warning: Dependent file "%s" does not exist.
16019 Invalid name for a configuration.
16020 <invalid name>
16021 As part of the build process, the remote target will be updated. This action requires the remote executable filename.
16022 Updating dependencies
16023 Done updating dependencies.
16024 Build
16025 No primary platforms are available.\nThe build system will be disabled. It is likely that a build system 'add-on' platform (.pkg), installed by Setup, failed to load.
16026 Add
16027 The executable file %s is recognized as belonging to a platform that has not been installed as an 'add-on' DLL by Setup.\nYou will not be able to debug this executable file.
16028 The source files "%s" and "%s" are both configured to produce the output file "%s".\nThe project cannot be built.
16029 Build MiniBar
16030 Source Files
16031 %s No. %i
16032 No.
16033 Error opening file %s to scan dependencies: %s.
16034 Error scanning file %s for dependencies.
16035 %s(%d): Could not find the file %s.
16036 The file %s has been modified and cannot be loaded as a Developer Studio project.
16037 The file could not be opened as a Developer Studio project.
16038 You can specify a configuration when running NMAKE
16039 by defining the macro CFG on the command line. For example:
16040 NMAKE /f "%s" CFG="%s"
16041 Possible choices for configuration are:
16042 "%s" (based on "%s")
16043 An invalid configuration is specified.
16044 Microsoft Developer Studio Generated NMAKE File, Format Version
16045 %s\n\nThis makefile was not generated by Developer Studio.
16046 This project file refers to an unknown project type "%s" for the configuration"%s."
16047 The old project configuration file for this project specified a project configuration"%s" that no longer exists. The configuration will be set to"%s."
16048 Deleting output files for rebuild.
16049 Error: Could not delete file "%s" %s
16050 The project settings have changed since the last build. Would you like to rebuild the affected files?
16051 %s\n\nThis directory does not exist.\nAdd the directory anyway?
16052 Illegal directory specification
16053 %s - %i error(s), %i warning(s)
16054 C/C++
16055 Link
16056 Resources
16057 Not Using MFC
16058 Use MFC in a Static Library
16059 Use MFC in a Shared DLL
16060 Invalid configuration "$(CFG)" specified.
16061 Tools
16062 Dependencies
16063 Resources
16064 Folder
16065 Only a single %s file may be marked as included in the build. Mark %s as included in the build and exclude the other %s file(s)?
16066 Inputs
16067 Outputs
16068 Multiple %s files exist in this project. Only one can be marked as included in the build. The others will be excluded from the build.
16069 Browse Info
16070 You must select at least one platform that your external makefile supports.
16071 Library
16072 Compiling...
16073 Compiling resources...
16074 Linking...
16075 Creating browse info file...
16076 Creating library...
16078 &Update remote output file
16079 Build target not copied to remote machine during a batch build.
16080 Cannot open the '%s' resource script for the project.
16081 "$(CFG)" == ""
16082 Source Files
16083 CFG
16085 You cannot close a workspace while a build is in progress. Select the Stop Build command before closing.
16086 The main project folder cannot be deleted.
16087 There is no source file to build.
16088 Build : warning : could not create output directory '%s'\n
16089 &Build browse info file
16090 Tool execution canceled by user.
16091 Some of the input files that the %s tool uses do not exist. Would you like to do a full build instead?
16092 ** DO NOT EDIT **
16093 &Options:
16094 Microsoft Visual C++ Generated NMAKE File, Format Version
16095 Customize
16096 Custom Build
16097 Performing Custom Build Step
16098 Bsc Maker
16099 Midl
16100 Win32 Rc Compiler
16101 Listing Files
16102 Preprocessor
16103 Deleting intermediate files and output files for project '%s'.
16104 Copy
16105 You cannot open a workspace while a build is in progress. Select the Stop Build command before opening.
16106 Executable files
16107 %s\n\nThis file is generated by an existing target. Do you wish to add a reference to this target instead of the actual file?
16108 Library files
16109 %s\n\nThis file type cannot be added to the project.
16110 Debug and Run-Time
16111 Input
16112 Optimizations
16113 Include files
16114 Dependency groups and dependency files cannot be deleted directly.
16115 Precompiled Headers
16116 C++ Language
16117 Customize
16119 Warning: Could not get path for temporary files. Current directory will be used instead.
16120 Error: Could not create temporary files path from current directory. Temporary files cannot be created.
16121 Error: Could not get temporary file name.
16122 Error opening temporary file:
16123 Error deleting temporary file:
16124 Error: Could not generate command line for the %s tool.
16125 A build is in progress. This build will not be affected by changes in the directory settings.
16126 Error saving project file.
16127 Taking a snapshot of the workspace.
16128 You cannot open a project of this type while a build is in progress. Select the Stop Build command before attempting to open a project of this type.
16130 No configuration specified. Defaulting to %s.
16131 The selection contained files that are already present in the specified project.
16132 %s\n\nThis file does not exist. Do you want a reference added to the project anyway?
16133 %s\n\nThe external makefile already has this name. You should supply a different name for the project file that wraps the external makefile.
16134 You cannot close the workspace while a build is in progress. Select the Stop Build command before closing the workspace.
16135 You cannot close a project while a build is in progress. Select the Stop Build command before closing the project.
16136 You cannot change the active project while a build is in progress. Select the Stop Build command before changing the active project.
16137 You cannot create a new project of this type while a build is in progress. Select the Stop Build command before attempting to create a new project of this type.
16138 Do you want to close all document windows?
16139 Output
16140 Directories
16141 Debug
16142
16143 &Compile %s
16144 &Build %s
16145 Preload
16146 Debug
16147 Additional DLLs
16148 Folder name cannot be blank.
16149 This build command requires an active project workspace. Would you like to create a default project workspace?
16150 %s\n\nA project with this name already exists. Continuing with this operation will overwrite that project. Are you sure you want to continue?
16151 Object/Library Files
16152 Reading project file
16153 Writing project file
16154 %s\n\nThis file is not included in the project. Would you like to add it?
16155 %s\n\nCannot update dependencies for this file because it is not part of the project.
16156 %s\n\nCannot compile this file because it is not part of the project.
16157 Local Name
16158 Default Settings
16159 Remote Name
16160 Project Settings
16163 Project configuration name cannot be blank.
16164 Invalid destination for %s\nOutput destination cannot be a directory.
16165 Please clarify destination for %s\nDoes this output destination specify a directory?
16166 Files cannot be dropped onto the workspace window during a build.
16167 Invalid destination for %s\nThe output file must have the extension '%s'.
16168 Invalid destination for %s\nThe output destination '%s' is not a valid path.
16169 Source Browse Info Files
16170 Resource File
16171 Browse Info File
16172 Target File
16173 Mapfile
16174 MSVCINCL.DAT
16176 SYSINCL*.*
16177 Are you sure you want to reset the settings of the selected items? This will restore the settings used when the items were created.
16178 Cannot compile the file '%s'; no compile tool is associated with the file extension.
16179 Do you want to save state information for %s?
16180 Multiple Windows definition (.def) files have been specified for this project. '%s' exists in the current project, and '/DEF:%s' exists in the current linker settings.\nThe file specified by '/DEF:' will be used for the build.\nContinue?
16182 Format of hex number '%s' is incorrect. It may only contain characters 0-9 and A-F (a-f). A '0x' prefix is optional. The maximum allowed hex number is 0xFFFFFFFF.
16183 Format of decimal number '%s' is incorrect. It may only contain characters 0-9. It must be positive, the '+' prefix is optional. The maximum allowed decimal number is 4,294,967,295.
16184 Format of octal number '%s' is incorrect. It may contain characters 0-7. A '0c' prefix is optional. The maximum allowed octal number is 0c37777777777.
16194 Do you want to continue building the remaining configurations?
16195 None
16196 Level 1 *
16197 Level 2
16198 Level 3
16199 Level 4
16200 Default
16201 Disable (Debug)
16202 Maximize Speed
16203 Minimize Size
16204 Customize
16205 None
16206 Line Numbers Only
16207 C7 Compatible
16208 Program Database
16209 No Listing
16210 Assembly-Only Listing
16211 Assembly, Machine Code, and Source
16212 Assembly with Machine Code
16213 Assembly with Source Code
16214 BuildError
16215 Build Error
16216 BuildWarning
16217 Build Warning
16218 BuildComplete
16219 Build Complete
16220 BuildUpToDate
16221 Build Up To Date
16224 Disable *
16225 Only __inline
16226 Any Suitable
16227 Assume No Aliasing
16228 Assume Aliasing Across Function Calls
16229 Global Optimizations
16230 Generate Intrinsic Functions
16231 Improve Float Consistency
16232 Favor Small Code
16233 Favor Fast Code
16234 Frame-Pointer Omission
16235 Full Optimization
16236 Best-Case Always *
16237 General-Purpose Always
16238 Point to Any Class *
16239 Point to Single- and Multiple-Inheritance Classes
16240 Point to Single-Inheritance Classes
16241 Error opening project file for save.
16243 Perform_If_Able
16244 Common
16245 Internal
16246 Executable Path
16247 Menu Text
16248 Deferred
16249 Class Wizard Info File
16250 &Settings For:
16251 This project may require the Microsoft Foundation classes to build successfully. These have not yet been installed. Please re-run Setup to install these classes.\nWould you like to open the project anyway?
16252 Current TL
16253 This project does not contain any configurations whose platforms are supported by this installation of Developer Studio. You will need to create a new supported configuration before you will be able to build, run, or debug your project.
16254 This project contains configurations whose platforms are not supported by this installation of Developer Studio. You will not be able to build, run, debug or modify these configurations.
16255 Project file %s does not exist.\nDo you want to create a new file?
16256 File %s cannot be created.
16257 A file may be opened by only one editor at a time. This project is already open in the workspace.
16258 In order to debug remotely or update the remote target, the remote executable file name is required.
16259 Please specify the executable file for the debug session.
16260 Please specify the executable file.
16261 The remote target "%s" is invalid.\nPartial path names are not allowed.
16262 The remote target "%s" is invalid.\nPlease include a volume name.
16263 Linking...
16265 Transports
16266 Error getting status of file "%s": %s.
16267 Error getting status of file "%s": %i.
16268 One or more files could not be added to the specified project.\n\nThese files already exist in the project:%s
16269 Debugging
16270 There are no available projects that can be added as dependencies.
16271 Input_Spec.
16272 <more files...>
16275 Output_Spec.
16276 Performing
16277 The file does not exist.
16278 The source file does not exist.
16279 The output file does not exist.
16280 Inheritance description not available.
16281 Error spawning 'vcspawn.exe'. The build could not be performed.
16282 \n (Not Supported)
16283 Error spawning %*.*s
16284 %*.*s terminated at user request.
16285 Error executing %*.*s.
16286 Command line is too long (tool does not support response files).
16287 Browser Database Maker
16288 Library Manager
16289 COFF Linker
16290 OLE Type Library Maker
16291 Win32 Resource Compiler
16292 TL Attributes
16293 TL Description
16294 Execution Models (non-native)
16295 Expression Evaluators
16296 Execution Models
16297 NM Attributes
16298 Current EE
16299 Current EM
16300 Current SH
16301 Symbol Handlers
16302 The input file does not exist.
16303 Build %s
16304 &Compile %s
16305 Settings...
16306 Project Settings
16308 , and
16309 , and not
16310 replaces
16311 Previous Folder
16312 Project
16313 Source File
16314 Header File
16315 The selection contained one or more duplicate files. Settings from the first instance of each file will be used.
16316 Insert Project Files
16317 Add Folder
16318 Drop
16319 Insert Files into Project
16329 Makefile
16330 A project configuration with this name already exists.
16331 %s\n\nThis file is read-only.\nYour changes will not be saved.
16385 %s.\nThe file could not be opened as a project file.\nThe local path is invalid.
16388 Custom Build
16390 Build : warning : failed to (or don't know how to) build '%s'\n
16398 The file does not exist.
16405 <multiple selection>
16416 &Create...
16417 &Create
16418 %1 already exists. Do you want to replace it?
16419 Can't write to %1.
16420 Please select at least one platform for your project.
16421 Intermediate object directories cannot be created under this long path. Please choose a shorter path.
16422 Error creating a new subdirectory with the project name.
16423 A file already exists with the same name as your new project name.
16424 You do not have proper access to create the new subdirectory.
16425 Invalid name for new subdirectory.
16426 Invalid name for new project.
16427 Error changing to directory %1.
16429 Directory already specified.
16430 Please select fewer files and try again.
16466 NULL
16467 nul
16469 Cannot open file.
16471 Win32 (x86)
16472 Macintosh
16473 Win32
16474 Macintosh (PowerPC)
16475 A project already exists with this name.
16476 The workspace file
16477 %s\nWorkspace File not Found. Unable to open workspace.
16478 You can speed up your builds by disabling compiled browse information, and using Developer Studio's "no-compile" browser. Do you want to disable compiled browse information?
16479 \n\nDo you want to convert the project?
16480 Inserting files into project
16490 Begin Custom Macros
16491 End Custom Macros
16494 Build
16495 Microsoft Developer Studio Generated NMAKE File, Based on
16496 Microsoft Developer Studio Generated Build File, Format Version
16498 Writing exported makefile
16499 The file %s is missing and cannot be loaded as an internal project.
16500 %s\n\nThis project was generated by a previous version of Developer Studio. Continuing will convert it to the new format.
16501 Could not find the active configuration name.
16502 An invalid configuration object was provided.
16503 Pre-link/Post-build
16504 Name
16505 Value
16506 iexplore.exe
16507 <param name=%s value=%s>\n
16509 Additional classes
16510 Browse for Class
16511 Classes (.class)
16512 Close
16513 Browser
16514 Information For Running Class
16515 Run project under
16516 Stand-alone interpreter
16518 jview.exe
16519 iexplore.exe
16520 .dll
16521 Post-build step
16522 The Java Virtual Machine platform does not support external make files
16523 External Dependencies
16524 .class
16525 Insert Ne&w Folder...
16526 Pre-link step
16527 The name "%s" is reserved and cannot be used as a folder name.
16544 You are about to rename a header file, "%s".\n\nThis file may be included in one or more project source files, which you will also have to modify to refer to the new file name.\n\nAre you sure you want to rename this file?
16545 You are about to rename a resource file, "%s".\n\nThis file may be included in one or more project resource scripts, which you will also have to modify to refer to the new file name.\n\nAre you sure you want to rename this file?
16546 This is not a valid makefile. To build this project using NMAKE,
16547 use the Export Makefile command and run
16549 Power Macintosh
16550 Win32 (MIPS)
16551 NMAKE /f "
16552 Save project file(s)
16553 No projects were checked. This command requires at least one project to be checked.
16554 The project being converted contains a 'target' with the same name as a project that already exists in the workspace.\n\nThis project cannot be inserted into the current workspace.
16555 Template Files
16556 <templates>
16557 Help Files
16558 The options file (.opt) for this workspace specified a project configuration"%s" that no longer exists. The configuration will be set to"%s."
16559 %s\n\nThis makefile could not be converted to a Developer Studio project.
16560 %s\n\nContinuing will create a new Developer Studio project to wrap this makefile. You will be prompted to save after the new project has been created.\n\nDo you want to continue?
16561 The project "%s" has been successfully converted and the following new project file(s) added to the workspace:\n\n
16562 \nNever delete these project files (%s) or you will have to recreate your project. You can still export .mak files, but these cannot be read back in without the corresponding %s files.\n\n
16563 In order for ClassView and other features to work correctly, you must include your project header files and resource files in the project. The conversion process tries to import the appropriate files into your project, however it is impossible to anticipate every situation.\n\n
16564 If you see an External Dependencies folder in your project after conversion, this will include files that were not recognized as belonging in the project. You should carefully review these files and drag and drop into the project any that were missed.\n\n
16565 Similarly, if the converted project contains files which should really be external dependencies, simply delete them from the project and they will automatically be added to the External Dependencies folder.
16566 This project file contains configurations for platforms that are no longer supported by Visual C++.
16567 Conversion of this project will remove unsupported configurations from the project. However
16568 your original .mak file will be saved so you can still use it with
16569 older versions of the product.\n\nProceed with conversion?
16570 This project file only contains configurations for platforms that are no longer supported by Visual C++.\n\nThis project file cannot be converted.
16571 Win32 (PowerPC)
16606 The configuration object being used is no longer valid.
16607 The tool settings cannot be added as requested.
16608 The tool settings cannot be removed as requested.
16609 The custom build step cannot be added
16610 %1\n\nThis configuration no longer exists.
16612 %1\n\nThis project no longer exists.
16613 %1\n\nThis configuration uses an unsupported platform.
16615 Environment Variables are not allowed in Output or Intermediate Directories.
16617 &Profile...
16618 Sto&p Profile Ctrl+Break
16619 The project is not up-to-date or was not built with profiling enabled. To enable profiling, choose Settings from the Project menu, click the Link tab, select the General category, and click the Enable Profiling checkbox. Rebuild your project.
16620 Profile
16621 ProfilerInstalled
16633 '%s'\nFile not found.
16635 Class files
16636 %s\n\nThis executable file does not exist.
16637 Browse
16638 A build cannot be started because another build is already in progress.
16640 Stop &Build
16641 Cannot add new configuration for external project
16643 Writing Build Log
16644 Add &Files to Project...
16645 Add &Files to Folder...
16646 The Persist As expression '%s' does not evaluate to '%s' .\n\nDo you want to reset it to the previous value?
16647 The following environment variables were not found
16648 Project file %s does not exist.\nDo you want to try to get it from source control?
16649 java;html
16700 DLLs (.dll)
16701 OLE Controls (.ocx)
16702 All Files (*.*)
16703 \nA backup copy of your original project file will be made at %s.
16704 The Browser Information file will not be created unless "Generate browse info" is checked on the C/C++ settings page for the target or at least one file.
16705 Exporting the makefile when writing the project file causes the project to be scanned for dependencies every time the project is saved. This process will slow down saving the project.
16710 <html>\n<! NOTE - this file was generated by Microsoft Developer Studio because no HTML file was specified.\n
16711 DO NOT EDIT this file. It will be regenerated each time you launch your applet.\nTo create a permanent HTML file,\n
16712 1. Create a new text file and save it\n 2. Insert the file into your project\n
16713 3. Select "Settings..." from the "Project" menu\n a. Choose the "Debug" tab\n
16714 b. Set the "Category" to "Browser"\n c. In the "Parameters" \n\n\n\n\n\nsection, select "Use
16715 parameters from HTML page"\n d. Specify the new HTML file name in the edit box for "HTML page"\n>\n
