ASUS Notebook series Flash utility version 4.0 Release 1.46, 10/08/1999
1.Make a DOS boot diskette with NO autoexec.bat and config.sys files. Copy the PHLASH.EXE, PLATFORM.BIN, and FA-0104A.ROM (say if you want to update to rev. 0104) BIOS image files to this diskette.
2.Turn the system off, then boot the system using the boot diskette you just created. Then type
PHLASH/MODE=3 FA-0104A.ROM and press [ENTER].
3.It will now update the flash BIOS. If flash memory has been successfully programmed, it will ask you to power off the system. Please press any key to turn off your system. IF the system does not turn off, turn the power off, then on.
4.Assuming that you have successfully flashed the BIOS. After the system reboots, hit [F2] to enter the CMOS Setup. At this point, go to "Load Setup Defaults" field at "Exit" sub-menu. Then save and exit Setup.
