3 Are you sure you want to permanently delete the setting "%s"?
4 %s KB
5 Bilinear
6 8-tap anisotropic
7 Please enter a name for this setting.
8 More Direct3D
10 Best image quality
11 High image quality
12 Blend
13 High performance
14 Best performance
15 %s MB
16 PCI
17 AGP
18 %u MHz
21 <Unavailable>
40 Not present
41 Unknown
42 NTSC
43 PAL
44 SECAM
46 %s%%
47 %s%sｰ
65 Off
66 Low
67 Medium
68 High
70 Off
71 Low
72 Moderate
73 High
75 Auto-select
76 Always off
77 Always on
78 AGP (PCI mode)
80 Chrontel
81 Chrontel 7000 Family
82 Chrontel 7003
83 Chrontel 7004
84 Chrontel 7005
85 Chrontel 7006
86 Chrontel 7007
87 Chrontel 7008
88 Conexant
89 Conexant Bt868
90 Conexant Bt869
91 Conexant CX25870
92 Conexant CX25871
93 Philips
94 Philips 7100 Family
95 Philips 7102
96 Philips 7103
97 Philips 7108
98 Philips 7109
99 Philips 7108B
100 Intel x86 Compatible
101 Intel Pentium(r)
102 Intel PentiumPro(r)
103 Intel Celeron(tm) or Xeon(tm)
104 Intel Celeron(tm)-A
105 Intel Pentium(r) II
106 Intel Pentium(r) III
107 Intel Pentium(r) 4
108 Intel Itanium(r)
109 AMD K5
110 AMD K6
111 AMD K6-2
112 AMD K6-3
113 AMD Athlon(tm)
114 AMD Duron(tm)
115 Cyrix MediaGX
116 Cyrix 6x86 Family
117 Cyrix MII Family
118 IDT WinChip C6
119 IDT WinChip 2
120 with MMX(tm)
121 with 3DNow!(tm)
122 with SSE
123 with SSE2
130 Red
131 Green
132 Blue
133 All channels
135 Use block transfer
136 Use page flip
137 Auto-select
138 &Contrast
150 Your flat panel display has a maximum resolution of %u x %u.
151 Windows will now switch your desktop to the selected settings. This may take several seconds. If Windows does not reappear correctly, wait 15 seconds and your original settings will be restored.
152 The screen has been reset to its default position.
200 PAL-N (Combination)
201 PAL-B
202 PAL-D
203 PAL-I
204 NTSC-J
205 NTSC-M
206 PAL-M
207 PAL-N
208 PAL-G
209 PAL-H
210 PAL-K1
211 PAL-B/D/G/H/I
212 [PAL only]
213 SECAM
300 Country
301 Format
302 Windows will now set your hardware to match the settings you have specified. The screen may blank for several seconds during this process.\n\nTo avoid potential problems with the hardware, do not turn off your computer during this process!
303 Description
304 Filename
305 Version
400 Auto-select
401 Composite Video-Out
402 S-Video-Out
420 Off
421 2
422 3
423 4
424 5
1000 NV??
1001 RIVA TNT
1002 Vanta
1003 TNT2 Model 64
1004 RIVA TNT2
1005 RIVA TNT2 Pro
1006 TNT2 Ultra
1007 GeForce 256
1008 GeForce DDR
1009 Quadro
1010 Aladdin TNT2
1011 GeForce2 MX/MX 400
1012 GeForce2 MX 100/200
1013 Quadro2 MXR/EX
1014 GeForce2 GTS
1015 GeForce2 Ultra
1016 GeForce2 Ti
1017 Quadro2 Pro
1018 GeForce2 Go
1020 GeForce3
1021 GeForce2 MX 100/200
1022 GeForce2 MX 100
1023 GeForce2 MX 200
1024 GeForce2 MX 400
1025 GeForce2 Integrated GPU
1026 Quadro DCC
1027 GeForce3 Ti 200
1028 GeForce3 Ti 500
1030 Fixed
1031 Grow Only
1032 Dynamic
1035 NVidia nForce
1036 220D SDRAM
1037 420D SDRAM
1038 220D DDR-RAM
1039 420D DDR-RAM
1040 with Dolby(r) Digital
1041 220
1042 420
1043 SDRAM
1044 DDR
1050 Additional OpenGL Properties
1051 Use shutter glasses
1052 Use vertical interlace monitor
1053 Use TwinView clone mode
1054 Use on board DIN connector on DAC 0
1055 Use on board DIN connector on DAC 1
1056 Use blue-line adapter
1114 The Full Screen Video Mirror feature requires the TwinView mode to be set to Clone or Extended Desktop.\nClick OK below and navigate to the TwinView page to select Clone mode from the available TwinView display modes.
1115 Full Screen Video Mirror
1116 The Full Screen Video Mirror feature requires the TwinView mode to be set to Clone.\nClick OK below and navigate to the TwinView page to select Clone mode from the available TwinView display modes.
1117 Custo&m OpenGL Applications Setting:
1118 Application Settings
5001 (Empty)
5002 QuickTweak Properties
5003 About
5004 Adjust Display Properties
5005 Custom Direct3D Settings
5006 Custom Color Settings
5007 NVIDIA QuickTweak
5008 Restore Driver Defaults
5009 Restore Hardware Defaults
5010 Unable to start the applet. Please ensure that the software has been properly installed on your system.
5011 QuickTweak
5012 Properties
5013 The settings "%s" have been successfully applied.\n\nThey will take effect the next time you start a Direct3D application.
5014 The default Direct3D settings have been restored.
5015 The settings "%s" have been successfully applied.\n\nThey will take effect the next time you start an OpenGL application.
5016 The default OpenGL ICD settings have been restored.
5017 Custom OpenGL Settings
5018 Display %u
5019 Unable to find the file NVDESK32.DLL. The Desktop Manager features will be unavailable.
5020 Dynamic link failure in NVDESK32.DLL. The Desktop Manager features will be unavailable.
5021 Program Files
5022 Select an Application
5023 The hot key you have selected is a single key without a <Ctrl>, <Shift>, or <Alt> key used in combination. Only function keys can be assigned as single-key hot keys.\n\nPlease select a different hot key for this action.
5024 The hot key you have selected is a single key with the <Shift> key as a modifier. You may use a <Shift> + Single-Key combination only if the Single-Key is a function key.\n\nPlease select a different hot key for this action.
5025 The hot key you selected is already in use.\n\nPlease select a different hot key for this action.
5026 Desktop Manager
5028 The Desktop Manager is currently enabled, but the system must be\nrestarted to enable all Desktop Manager functionality.\n\nDo you wish to restart your system now?\n\n(Select "Yes" to restart the system now, "No" to continue without restarting.)
5029 The Desktop Manager is currently disabled, but it will remain in your\ncomputer's memory until the system is restarted.\n\nDo you wish to restart your system now?\n\n(Select "Yes" to restart the system now, "No" to continue without restarting.)
5031 The settings "%s" have been successfully applied.
5032 The default color settings have been restored.
5040 Desktop Manager Enabled
5042 Desktop Manager Disabled
5044 Desktop Manager Properties
5050 TV Output
10000 Argentina
10001 Belgium
10002 Denmark
10003 Finland
10004 Germany
10005 Guinea
10006 Hong Kong
10007 India
10008 Indonesia
10009 Italy
10010 Malaysia
10011 Netherlands
10012 Norway
10013 Portugal
10014 Singapore
10015 Spain
10016 Sweden
10017 Switzerland
10018 China
10019 North Korea
10020 Denmark
10021 Finland
10022 Germany
10023 Italy
10024 Malaysia
10025 Netherlands
10026 Norway
10027 Portugal
10028 Spain
10029 Sweden
10030 Switzerland
10031 Belgium
10032 Hong Kong
10033 United Kingdom
10034 Guinea
10035 Japan
10036 Canada
10037 Chile
10038 Colombia
10039 Costa Rica
10040 Ecuador
10041 Haiti
10042 Honduras
10043 South Korea
10044 Mexico
10045 Panama
10046 Puerto Rico
10047 Taiwan
10048 United States of America
10049 Venezuela
10050 Brazil
10051 Paraguay
10052 Uruguay
10053 France
12000 Enable fog table emulation
12001 Adjust Z-buffer depth to rendering depth if unequal
12002 Enable alternate depth buffering technique
12003 Display logo when running Direct3D applications
12004 Use DirectX 5 compatibility mode
12050 Please note that full scene antialiasing and the use of a unified depth buffer or window flipping are mutually exclusive.\n\nIf you wish to enable the unified depth buffer or window flipping, full scene antialiasing will be automatically disabled in the driver.
13000 Enable buffer region extension
13001 Allow the dual planes extension to use local video memory
13002 Use fast linear-mipmap-linear filtering
13003 Enable anisotropic filtering
13004 Enable alternate depth buffering technique
13005 Disable support for enhanced CPU instruction sets
16000 Your hardware settings cannot be applied until you have tested them.\n\nSet the desired clock frequencies and then choose the 'Test New Settings' button to ensure that the hardware can support your selections.
16001 Your graphics hardware will now be tested at the new clock settings for several seconds.\n\nIf your computer stops responding during this time, turn your computer off and then back on.\nYour previous settings will be automatically restored.
16002 You must restart your computer before the new settings will take effect.\n\nDo you want to restart your computer now?
16004 %u x %u pixels
16005 %u Hz
16007 Analog Monitor
16008 Digital Flat Panel
16009 TV
16010 A custom setting with this name already exists.\n\n Do you wish to overwrite it with the current setting?
16011 Windows was unable to change your display settings.\n\nPlease close the Display Properties, re-enter and try again.
16020 Device Settings
16021 Device Adjustments
17001 Default Monitor
17002 Plug and Play Monitor
17010 Display Properties
17011 Settings
17012 Reverting in %d seconds
17018 %d by %d pixels
17019 %d Hertz
17020 Windows will now apply your new display settings. This will take a few seconds, during which time your screen may flicker.\n\nIf your new settings are not applied correctly, your original display settings will be automatically restored in 15 seconds.
17021 Display Settings
17022 Custo&m OpenGL settings:
17026 First
17027 Second
17028 Third
17029 Fourth
17030 Fifth
17031 Sixth
17032 Seventh
17033 Eighth
17035 Analog &Monitor :
17036 &Digital Flat Panel :
17037 &TV :
17038 Analog &Monitor
17039 &Digital Flat Panel
17040 &TV
17041 TV Encoder Type:
17042 TV Codec Type:
17051 1x
17052 2x
17053 4x
17054 8x
17055 Use these control to select the degree of antialiasing to be used in OpenGL applications.
