home *** CD-ROM | disk | FTP | other *** search
- Short: Nice CMYK Sep/Color Correction utility
- Uploader: alatina@hotmail.com
- Author: alatina@hotmail.com
- Requires: 68020, OS 3.x, gfx/misc/RainbowSystem.lha
- Type: gfx/misc
- Version: 1.0
-
- WYSIWYG 1.0
- -----------
-
-
-
-
-
- WYSIWYG is a professional color-correction/color-separation utility, and much
- more.
-
-
- First, using it, your pictures will be printed "exactly" like the original,
- without chromatic aberrations due to inks impurities: you can set not only the
- usual magenta/yellow correction, but also all the other combinations:
-
-
- - impurities into cyan:
-
- - % of Magenta
- - % of Yellow
-
- - impurities into magenta:
-
- - % of Cyan
- - % of Yellow
-
- - impurities into yellow:
-
- - % of Cyan
- - % of Magenta
-
-
- So you can reproduce exactly on screen the color of these inks on the paper; so,
- using your settings, WYSIWYG will modify your pictures!
-
-
-
- Second, WYSIWYG allows the modification of the colouring of the picture by
- operating on:
-
-
- - balance (red, green, blu, black).
- - gamma (red, green, blu, black ).
- - contrast
- - brightness
- - saturation
-
-
- With a *REALTIME* preview, like no other programs!
-
-
-
- Third, you have a full control of the two most important parameters of CMYK
- separation:
-
-
- - UCR (under color removal)
- - GCR (grey component replacement)
-
-
- with (another!) realtime preview!
-
-
-
- And, last but not least, you can save the modified image in *TIFF* *CMYK*
- format, how is required by all most important DTP programs.
-
-
-
- Installation:
- ------------
-
-
- You need to have already installed both:
-
- - RainbowSystem (by Andrea Latina, myself.. :), not included in this archive.
-
- - GTLayout.libray, included in this archive..
-
-
-
- Usage:
- -----
-
-
- First at all run WYSIWYG_Prefs to set up your inks impuritites (the defaults are
- the standard values), after run WYSIWYG and select a picture (JPEG or datatypes
- are detected), then... enjoy (and take a look to menus!)!
-
- You can set as tooltype (or as cli argument, if you start WYSIWYG from Shell)
- the name of the public screen where to load the program...
-
-
-
- Greetings:
- ---------
-
-
- Alessandro Zummo for the upload.
-
-
-
- Author:
- ------
-
- Andrea Latina
-
- Fidonet: 2:334/21.14
- Internet: alatina@hotmail.com
-
-
- ps: Sorry for my bad english... :-))
-
-