home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
PC Action 1998 December
/
PCA1298.ISO
/
Hardware
/
7
/
readme.txt
next >
Wrap
Text File
|
1998-10-14
|
5KB
|
129 lines
Hercules Terminator BEAST
S3 Reference Drivers
Version 6.11.01
Installation Guide
October 14th, 1998
CONTENTS
Introduction
Disclaimer
If You're Updating From An Earlier Release
Installation
What's New In This Release
Known Limitations
Introduction
============
This guide contains the information you need to install the Windows 95/98
reference drivers for your Hercules product.
**************************IMPORTANT NOTE***PLEASE READ***************************
This driver version requires DirectX 6 for proper operation! Please install
DirectX 6 before using this release. If you are installing this driver release
from the Hercules driver CD, DirectX 6 will automatically be installed with the
Typical installation option. If you downloaded this software release, you may
obtain DirectX 6 from Microsoft's web site at
http://www.microsoft.com/directx/resources/dx6end.htm
*********************************************************************************
Disclaimer
==========
Reference Drivers are software drivers that are released by the manufacturer of
the controller chip that is used on your Hercules product. These drivers are
are provided "as-is", as we have received them from the manufacturer. They are
provided as a convenience to our customers, pending a final release from Hercules.
These drivers are not supported by Hercules.
If You're Updating From An Earlier Release
==========================================
If you already have an earlier version of our Power Drive<tm>
Windows 95/98 driver installed, do NOT run the UnInstall
program located in the Hercules PowerTools program group
before installing this release. This release only
replaces the existing driver files, and does not install
Hercules Touch or any other utilities. The version of Touch
already on your system should run properly with this release.
Installation
============
To install this release, right-click the Windows 95 or 98 desktop and choose
Properties. Click the Settings tab. Installation procedures differ between
Windows 95 and 98 from this point so see the instructions appropriate to your
operating system below.
Windows 95: Click the Advanced Properties button. In the Adapter tab, click Change,
then Have Disk. Next click the Browse button, navigate to the location you
expanded the files contained in this update, and click OK. If more than one
device appears in the subsequent dialog box, choose "S3 Inc. Savage3D v6.11.01"
from the list and click OK. If a dialog box appears indicating that the files you
are installing are older than the ones on your system, click NO to replace the
existing files with the files in this release. Click Close on the remaining dialog
boxes, then click Yes when prompted to restart your computer.
Windows 98: Click the Advanced button. Under the Adapter tab, Click Change, then
click Next. Select "Display a list of the drivers in a specific location"
and click Next again. Click Have Disk. Next click the Browse button, navigate to
the location you expanded the files contained in this update, and click OK. If
more than one device appears in the subsequent dialog box, choose
"S3 Inc. Savage3D v6.11.01" from the list and click OK. You may receive a
warning indicating the current driver is a closer match than the one you are
trying to install. Click Yes to replace the current driver, then click next.
If a dialog box appears indicating that the files you are installing are older
than the ones on your system, click NO to replace the existing files with the
files in this release. Click Finish when prompted, then click Close on the
remaining dialog boxes. When prompted, click Yes to restart your computer.
What's New In This Release
==========================
1. Random flashing polygons in Direct3D games and applications such as
BattleZone, 3D Winbench 98 and others have been eliminated.
2. Tiling problems have been fixed; for example the Windows 98(high color)
screen saver now displays correctly when stretched fullscreen, the menus
in MotoCross Madness now display properly, and other games and applications
that exhibited display anomalies should be improved by this fix.
3. Trees and other scenery are now displayed properly in the Need for Speed 3
(Corvette) demo.
4. Intel IBASES 1.7 AGP Texturing Test no longer hangs on VIA MVP3 systems
when zooming in or out.
5. This driver requires DirectX 6 and Terminator BEAST BIOS version K3D or
later for proper operation. See above for the location of DirectX 6 on
Microsoft's web site. BEAST BIOS K3D may be downloaded from
http://www.hercules.com/support/drivers/term/tbeast/.
Known Limitations
=================
1. Intro videos on BattleZone and Microsoft Flight Simulator 98 are
played compressed at the top of the screen. As a workaround, install
Microsoft DirectVideo.
2. Pressing Alt-Tab multiple times while running Quake 2 or GLQuake may
cause a crash.
3. G-Police main menu may smear after returning from gameplay. To avoid this problem,
disable anti-aliasing in the G-Police graphics options screen.
*** End of File ***