1049 Show single-monitor maximize button on title bar
1050 nView Desktops
1051 nView Properties
1052 Maximize to current monitor
1053 RunApplication
1054 DesktopBrowser
1055 DesktopToolbar
1056 This hot key can only be used if "Show desktops in Explorer window folder tree" is enabled on the nView Desktops panel.
1057 Individual settings
1058 Enable
1059 Position memory
1060 Clear all
1061 Are you sure you want to clear all position memory and individual settings for this application?
1062 Open link on monitor
1063 Default
1064 SendWindowToMonitor
1065 GatherAllToMonitor1
1066 LoadProfile
1067 SendWindowToDesktop
1068 CollapseToDesktop
1069 AlwaysOnTop
1070 ZoomWindow
1071 About this App...
1072 This application does not support nView transparency functions properly. Transparency has been disabled for this application.
1073 This application does not allow nView to modify its window placement. Window management has been disabled for this application.
1074 This application does not support application position memory properly. Application position memory has been disabled for this application.
1075 Application position memory is turned off globally - to enable position memory, please turn on the global setting located on the Windows tab of the nView control panel.
1079 Using the mouse, drag a rectangle around the area of the desktop you wish to zoom. You can change this rectangle later through selecting the fixed frame zoom style again.
1080 Click on the window you wish to zoom (this cannot be the zoom window). You can change this window later through selecting the window zoom style again.
1081 Display Properties
1082 Settings
1407 KeystoneToggle
1408 NVKeystone
1409 Activate
1410 Adjust...
1411 Options...
1412 Reset
1414 Could not initialize DirectX.\nNVKeystone requires the installation of\nDirectX version 8.0 or greater.
1424 Could not render 3D environment.\nMake sure you are running 16 or 32 bit color depth.\nExiting NVKeystone.
1425 Not enough video memory for NVKeystone.\nSwitch to a lower resolution or color bit depth.
1426 NVKeystone could not find any hardware-accelerated Direct3D devices.
1427 \n\nNVKeystone will now exit.
1428 NVKeystone could not find any compatible Direct3D devices.
1429 NVKeystone cannot run in a desktop\nwindow with the current display settings.\nPlease change your desktop settings to a\n16- or 32-bit display mode and re-run NVKeystone.
1430 NVKeystone requires functionality that is\nnot available on your Direct3D hardware accelerator.
1431 Your Direct3D hardware accelerator cannot\nrender into a window with the current\ndesktop display settings.
1432 NVKeystone requires functionality that is\nnot available on your Direct3D hardware\naccelerator with the current desktop display\nsettings.
1433 NVKeystone could not reset the Direct3D device.
1434 A D3D object has a non-zero reference\ncount (meaning things were not properly\ncleaned up).
1436 Not enough video memory for NVKeystone.
1437 General NVKeystone application error.
4120 The hot key "
4121 " has been used by the system. Please use other key combination.
4122 " has been used by nView. Please use other key combination.
4123 Hot key stroke error
4124 Enter the hot key by pressing a key combination in the "Hot key stroke" field.
4125 The profile "
4126 " is locked. You cannot save to this profile.
4128 (locked)
4129 (modified)
4137 Bitmap files, JPEG files
4138 Icon files
4140 Center
4141 Tile
4142 Stretch
4146 An Active Desktop wallpaper is defined for desktop %s. Since Active Desktop is not enabled, this wallpaper will be disabled.
4147 nView Desktop Wallpaper Error
4153 This wallpaper (%s) can only be used if Active Desktop is enabled. Please enable Active Desktop before choosing this wallpaper.
4214 My Presentation Profile
4215 Default Presentation Profile
4220 Default Docked Profile
4221 My Docked Profile
4222 Default Undocked Profile
4223 My Undocked Profile
4224 Default Write Profile
4225 My Write Profile
4226 Editing Profile:
4227 Done Editing Profile
4392 Toggle NVKeystone Mode
4393 Show nView options menu
4395 Show slides on monitor
4432 Collapse to title bar
4433 Restore
4434 Show nView options menu
4444 Transparency and the magnifying style zoom window\nare disabled while running in 256 color mode on any\nscreen or while running a Direct3D, OpenGL or hardware overlay application.
4449 Individual Settings for
4451 means enable for this app.
4452 means disable for this app.
4453 means use global settings.
4454 Active
4455 Last
4459 This tab contains information about the nView Desktop Manager. The Setup Wizard can also be accessed from this tab.
4460 A Profile contains a record of all nView display settings for easy software setup. Users can either select a Profile from the list below or create their own custom Profile.
4461 Allows control of window and dialog box placement when using multiple monitors.
4462 Enables users to create up to 32 unique desktops.
4463 Provides dynamic zoom functionality on the desktop. Also enables full screen video playback via the Video Mirroring Control button.
4464 Tools to improve nView functionality for mobile and desktop users.
4465 Provides special windows effects that users can apply to their applications.
4466 Allows customization of the nView user interface.
4467 Allows users to control nView settings on a per application basis.
4468 Hot keys lets users perform various actions with shortcut keys or key combinations.
4469 You have loaded a locked profile - settings cannot be changed.
4470 Internet Explorer(tm) has been extended by nView. To use the extension, choose the monitor you wish to open links on from the nview extension menu. Performing a ctrl-left-click or a double-right-click will then open selected hyperlinks on that monitor.\n
4471 PowerPoint(tm) has been extended by nView. To use the extension, choose the monitor you wish to display slide shows on from the nview extension menu. Slide shows will then be displayed on that monitor.\n
4472 Transparency is temporarily disabled because an application which uses DirectX or 3D hardware features is currently running.\n
4473 Transparency is not supported when one of your screens is set to 256 colors.\n
4474 The profile you are attempting to load is an unsupported format
4475 Profile Load Error
4476 Show Zoom Window
4477 Hide Zoom Window
4478 Locked profile
4479 The current profile "
4490 " is locked. You can not change any settings in a locked profile.\nPlease load an unlocked profile if you want to change settings in a locked profile.
4491 Create a new desktop...
4493 The icon file "
4494 " is in unknown format. Please use other icons.
4495 Bad Icon File
4497 The image file "
4498 " is in unknown format. Please select Bitmap (.bmp) or JPEG (.jpg) files.
4499 Bad image File
4503 nView Transparency
4504 An application which uses 3D or video overlay is active. Transparency will be disabled until the application is closed.
4505 The application which was using 3D or video overlay has closed. Transparency support is now enabled again.
4507 Application
4508 Class
4509 has individual settings
4510 has no individual settings
4511 all nView functions enabled
4512 all nView functions disabled
4513 some nView functions disabled
4514 nView - Add Application for Individual Management
4515 Select the application which you wish to add to the individual application management list.
4516 nView has detected that dragging transparent windows larger than %d by %d pixels may be sluggish on your system. Do you wish to disable transparency while dragging windows larger than this?
4517 nView Transparent Drag Performance
4518 An application just started which needs to run in a mode which NVKeystone is not compatible with. Disabling NVKeystone.
4519 NVKeystone is not compatible with Rotate. Disabling NVKeystone.
4520 nView - Application Add Error
4521 The file selected is not an application. It will not be added to the application list.
4522 The application selected is already listed in the individual settings list.
4523 The application selected cannot be individually managed by nView.
4524 The Window Class selected is already listed in the individual settings list.
4525 The Window Class selected cannot be individually managed by nView.
4547 Fixed frame
4548 Show Fixed Frame
4549 Auto-move Zoom Window
4550 Display Calibration Screen
4551 Adjust your display to maximize image quality now. If your display has an Auto-Adjust feature, run it now.
4552 When done adjusting, press any key to exit.
4553 nView Display Mode
4554 DualView
4555 Standard (DualView)
4556 Card %d
4557 Output %d
4558 NVIDIA nView Wizard
4559 The mode selected will require a reboot of your machine. Your machine will be rebooted when you click the Finish button on the last wizard step.
4560 Zoom Window
4561 All rights reserved
4578 nView allows you to set up custom window management settings per application on your machine. These settings include window relocation options, dialog options and launch settings.
4579 To enable a Window or Dialog setting for the application, check the box with a black checkmark. To disable, uncheck the box. To use the global setting, check the box with a gray or 'block' check.
4580 Launch settings control the state of the application when it is started. By default, the setting is off. To force a setting to be on at launch, select the 'On' option. To have a window setting 'remembered' when you close the application and then restored when the app is launch again, select 'Last Setting'.
4581 To launch an application on a specific desktop, select the desktop from the dropdown menu or else select 'Active' to have apps launch on the currently active desktop.
4582 nView supports three different multi-display modes under Windows 2000. 'DualView' mode treats every monitor as a separate device by Windows. 'Span' mode treats multiple monitors as a single large desktop. 'Clone' mode displays the same image on both monitors.
4583 These settings can be changed at any time from the Display Properties Control Panel and the nView Display Mode tab. Switching between 'DualView' and either 'Span' or 'Clone' modes requires a reboot. Switching between 'Clone' and 'Span' does not.
4584 This advanced feature allows specific nView functions to be disabled per application or Window Class. nView may also be totally disabled for an application. Note that disabling a function overrides all other settings.
4585 If you disable nView functions per application, then only that application will have its functions disabled. If a Window Class has nView functions disabled, then any window from any application which uses this class will have the selected functions disabled.
4586 It is recommended that nView functions be disabled only if a particular application or Window Class is being incorrectly managed by nView. Note that functions disabled by nView will be saved and restored by Profile Save/Load.
4587 NVKeystone Adjustment
4588 Drag corners with mouse
4589 Use arrow keys for fine adjust
4590 OK
4591 - done adjusting
4592 Cancel
4593 - cancel changes
4594 Reset
4595 - clear adjustments
4596 Options
4597 - edit options
4603 Switch to next display device
4604 Toggle clone mode
4605 This Hot key is not supported when multiple displays are active.
4606 ToggleOutput
4607 ToggleClone
4630 This action will switch NVKeystone between active, adjust and off modes.
4631 This action will move your display output to the next display device.
4632 This action will toggle clone mode on or off.
4633 Allow taskbar to span multiple monitors
4634 Limit taskbar to a single monitor
4635 Center dialog boxes on application's window
4636 nView status indicator for window
4637 nView individual settings indicator
4638 This application is using individual settings.
4639 Make nView caption bar buttons transparent
4640 This hotkey is only operational if you have more than one monitor and you are in clone or single monitor mode.
4642 Magnifying glass
4644 NVIDIA nView Individual Application Help
4645 Centered on cursor
4647 Help
4648 Disable nView Functions
4670 Modify Profile
4671 Modify your desktop, then press save to finish saving %s.
4672 Undocked Mode
4673 The system can apply an undocked profile when the tablet PC is undocked. An undocked profile provides a configuration for using the tablet PC as a free-standing tablet or, if an optional tablet PC keyboard is attached, as a free-standing notebook.
4674 View Mode
4675 The system can apply a docked in view mode profile when the tablet PC is docked in view mode. A docked in view mode profile provides a configuration for working within applications on an external monitor while another application, such as Microsoft Outlook Today, remains open on the tablet PC screen.
4676 Write Mode
4677 The system can apply a docked in write mode profile when the tablet PC is docked in write mode. A docked in write mode profile provides a configuration for writing on the tablet PC screen while retaining access to applications displayed on an external monitor.
4679 Tabview Profile Help
4681 NviewDebugHotkey
4683 Active Desktop wallpaper(s) are defined for one or more desktops.\n%s\n\nSince Active Desktop is not enabled, the wallpaper(s) will not be visible. To display the wallpaper(s), enable Active Desktop.
4684 An Active Desktop wallpaper is defined for desktop %s. Since Active Desktop is not enabled, this wallpaper will not be visible. Please enable Active Desktop to display this wallpaper.
4685 PerformanceDataDump
4811 Per Monitor
4812 Standard
4813 Monitor %s wallpaper.
4815 Desktop Wallpaper:
4816 Desktop Wallpaper for monitor %s:
4817 No applications on this desktop.
4819 Would you like to enable Active Desktop?
4820 ColorAction
4823 Show Color Keyed window
4824 The selected application has closed.
4825 The selected application is loading.
4850 This action will toggle the color keyed window to be maximized on the current desktop
4851 Color Key Warning
4852 All current enabled colors are being used by individual application settings. Colors will not be automatically assigned until there are free colors.
4853 Open windows are using this color. Pressing OK will disable the color and will cause these windows to lose their color key.
4854 An application is set up to use the disabled color %d through individual settings. This application will now open without a color key.
4855 Color Key %d
4856 nView Critical Error
4857 nView experienced a critical error. It is strongly recommended that you save all open documents and then log off and back on (or else restart your system).
4858 Color Key
4860 Off
4861 Low
4862 Medium
4863 High
4864 A multi-display mode is selected on the Settings tab. Please change to a single-display mode before enabling your displays.
4865 You must log off to disable and unload nView Desktop Manager from memory when the Desktop Explorer shell extension is enabled.\n\nClick OK to log off or Cancel to only disable Desktop Manager, which remains in memory until you log off.
4866 NVTaskSwitch
4867 Show nView task switcher
4868 This action will allow you to change the nView task switcher hot key (the default is Alt-Tab).
4869 nView has detected that %s is a 16-bit application. Many 16-bit applications are incompatible with nView Desktop Management and can crash when running Windows 98 or Windows Me. NVIDIA recommends disabling nView Desktop Manager if you run 16-bit applications.
4870 Click Yes below to unload nView Desktop Manager from memory. Close and relaunch %s after Desktop Manager has unloaded; Desktop Manager restarts when you log on again.
4871 To permanently disable Desktop Manager, use the nView Desktop Manager control panel. Do you want to unload Desktop Manager?
4872 Digital Vibrance:
4873 NVMax
4874 NVMax/Restore window
4875 This action will toggle an nView max/restore function for the current window
4876 NVCollapse
4877 Collapse/Restore window
4878 This action will toggle an nView collapse/restore function for the current window.
4879 The nView task switcher action requires "Alt" to be in the key combination.
4890 The nView task switcher is not enabled. Would you like to enable the nView task switcher?
4893 Unable to disable video overlay. Please close all applications that are using the video device and try again.
4895 TogglePower
4896 Filename
4897 Description
4898 Version
4899 Show Gridlines
4900 Frame Window
4901 Desktop Manager hook library
4902 Shell namespace library
4903 Desktop Manager Properties Panel
4904 nView Desktop Manager Configuration Wizard
4905 Control Panel Icon Program
4906 Internet Browser Program
4907 When checked, turns off hardware overlay so video playback windows can be skewed by NVKeystone.
4908 When checked, NVKeystone unloads itself from memory after 30 seconds of inactivity.
4909 When checked, antialiasing filtering is performed on the NVKeystone image.
4910 Select the display you want Keystone to skew.
4911 When checked, one mouse click selects a drag point, a second mouse click releases.
4912 You can set up a hot key to change NVKeystone modes.
4913 When checked, NVKeystone displays gridlines on the NVKeystone Adjustment Screen.
4927 The desktop %s
4928 exists in the desktop list. You need to remove the desktop in order to rename other desktops to this name.
4929 Rename desktop warning
4930 exists in the desktop list. You need to remove the desktop in order to add the desktop with this name.
4931 The profile %s
4932 exists in the profile list. You need to remove the profile in order to add the profile with this name.
4933 Add profile warning
4934 Add desktop warning
4935 NVKeystone Power Warning
4936 Desktop Explorer
5600 Enabled
5602 Disabled
5603 Monitor
5604 The monitors are not in a rectangular area, you will not be able to apply this arrangement.
5605 The enabled monitors must be in a rectagular area and no disabled monitors are allowed in the rectangular area.
5606 Illegal Arrangement
5608 Monitor width or height is 0
5609 Warning
5610 Enabled monitors must be arranged in a rectangular area before you can apply settings. No disabled monitor is allowed in this rectangular area.
5611 Total desktop area of
5612 Use the Settings tab to change resolutions.
5613 nView requires version 4.0 or higher of Internet Explorer(tm) to be installed - exiting wizard install. After you install version 4.0 of Internet Explorer and reboot, this wizard will appear again. Note that although nView requires Internet Explorer to be installed, other browsers may be used for web browsing.
5614 NVIEW ERROR
5615 NVIEW UNINSTALL ERROR
5616 nView Uninstall
5617 Desktop Explorer
5618 The Desktop Explorer extension requires version 6.0 or later of Internet Explorer(tm) to be installed. Note that although Desktop Explorer requires Internet Explorer 6.0 to be installed, other browsers may be used for web browsing.
5619 You must log off in order to enable or disable the Desktop Explorer. Press Yes to log off now, No to ignore your change.
5620 Windows is unable to log off and must reboot instead. Press OK to reboot your system or Cancel to ignore your change.
5621 This control panel is disabled when nView is running in a two monitor span mode. Click the Advanced button to change.
5622 Smooth Filtering
5623 Lock Zoom Source
5624 Fixed Source
5625 Enable Editing
5626 Present on Monitor
5627 Prevent Web Popups
5628 Open Attachments on Monitor
5629 Enable Taskbar spanning across monitors
5630 Make Taskbar span across monitors
5631 Enable Video Zooming
5632 Your Multiview settings have been configured. Do you want to keep these settings?
5633 Show Mouse Cursor
5634 Analog
5635 Digital
5636 Both
5637 nView can operate in two modes - Span or Multiview. Span mode allows using up to two monitors maximum but supports hardware accelerated OpenGL. Multiview mode (default) supports up to 16 monitors but OpenGL is not hardware accelerated. You can switch modes using the checkbox below (requires a reboot). Note that in Span mode, the nView Multiview control panel is disabled - monitor arrangement is set via a new nView tab.
5638 You must reboot your computer to change your mode. Click OK to reboot.
5639 Reboot for Mode Change
5640 Restores window
5641 Your display may not be able to handle this change of output type. Are you sure you wish to change the output type?
5642 Generic
5643 Advanced
5644 Finance
5645 Disable Application State Memory
5646 Application State Memory
5647 Transparency has been temporarily disabled while a 3D app is running on the desktop. Transparency will be re-enabled when the 3D app closes.
5648 Gather all applications to Monitor 1
5649 Clear all application settings
5650 Recover Windows
5651 Enable nView extension button on title bars
5652 Collapses window to title bar
5653 Accesses nView extension menu
5654 Shift-click (left mouse button) on hyperlinks to use feature.
5655 Revert in 15 second
5656 Revert in %d seconds
5657 You will now apply your new Multiview settings.\n\nIf your new settings are not applied correctly, your original settings will be automatically restored in 15 seconds.
5658 Multiview
5659 There is a 3D application running that is using hardware OpenGL acceleration, the display driver could not support Multiview multi displays under this condition. \n\nPlease quit the 3D application then apply this settings or you can click Advance button on Multiview tab to setup span mode.\n\nThe span mode will support hardware OpenGL acceleration.
7000 Select a Theme
8269 Thumbnails
8270 Disabled
8271 Wallpaper
8272 Screenshot
8273 Geometry
8274 Small
8275 Medium
8276 Default
8277 Large
8278 Name
8279 Desktop
8280 Applications
8281 Application
8282 Location
8283 Thumbnail mode selection.
8284 Disables thumbnails and displays the desktop or application icon.
8285 Displays the desktop Wallpaper or the application icon.
8286 Displays a screenshot of the desktop.
8287 Displays shaded windows to represent application positions.
