12 Can't save file because the disk is full or locked.
13 Can't perform operation because the scratch disk is full, locked, or unavailable.
14 Select an area within the image.
15 %d Colors
16 Nothing to undo right now.
17 Insufficient memory for undo, continue anyway?
18 Cannot Undo
19 Delete
20 Pencil
21 Eraser
22 Line
23 Smoothing
24 Swatch
25 Paint Style
26 Zoom
27 Delete Anchor
28 The Noise Suppression range is 1-80. Closest value inserted.
29 The Line Thinning Range is 0-20. Closest value inserted.
30 The Uniform Line Weight Range is 0-12. Closest value inserted.
31 Centerlining -
32 Outlining -
33 Line Recognizing -
34 Unknown input format.
35 Not a 1 bit per pixel rasterfile.
36 Compressed rasterfiles not allowed.
37 Insufficient memory for Separate Shapes.
38 Bezier curves have been output in a straight line only output format. To obtain better results, please reconvert the image using the straight lines only option.
39 Can't write preference because the disk is full or locked.
40 Invalid preference file, using defaults.
41 The percentage range is 0-100. Closest value inserted.
42 The Tolerance range is 1-5. Closest value inserted.
43 Save changes to the converted image "%s" before closing?
44 All paths in this image have been deleted.
45 Value ranges between 0 and 100. Closest value inserted.
46 Stroke weight ranges from 0 to 25.5 points. Closest value inserted.
47 The maximum number of custom colors is 900.
48 That color model is not allowed for drawing tools.
49 Magic Wand tolerance ranges between 0 and 255. Closest value inserted.
50 Arrow - select individual paths
51 Lasso - select multiple paths
52 The Straight to Curved range is 1-5. Closest value inserted.
53 Mixed
54 pt.
55 pixels
56 pixels/inch
57 %
58 Memory ran low during the conversion and some of the smaller paths were skipped.
59 The currently selected conversion method is only compatible with 2 color conversions. Do you wish to change the conversion method to "Outline"?
60 Insufficient memory to open PICT file. Please increase the amount of memory allocated to Streamline by at least
61 Complexity ranges from 2 to 16 for gray scale images. Closest value inserted.
62 (imported)
63 Error reading PICT file.
64 Disk full. To open PICT file, either increase memory allocated to Streamline, or increase free space on disk to at least
65 The input file is still open due to a low memory situation. Therefore saving to the same name is not allowed.
66 Insufficient memory available even after disposing of short paths. Conversion aborted. Please allocate more memory to Streamline to convert this image.
67 Insufficient memory to acquire image.
68 Maximum colors ranges from 2-255. Closest value inserted.
69 Maximum colors:
70 Unlimited/accurate color
71 %d Tag,
72 %d Tags,
73 %d Total Color
74 %d Total Colors
75 Maximum path smoothing has been achieved.
76 %d points were eliminated.
77 %d point was eliminated.
78 No points were found within the direction point smoothing tolerance specified.
79 Smoothed %ld points of the %ld points operated on.
80 Smoothed %ld point of the %ld points operated on.
81 Smoothed %ld point of the %ld point operated on.
82 Can't write settings because the disk is full or locked.
83 Invalid settings file, using defaults.
84 Undo is disabled due to insufficient memory. Turn this warning message off?
101 Zoom In - enlarge view (2x)
102 Zoom Out - reduce view (2x)
103 Hand - move viewing area
104 Eyedropper - sample image color
105 Delete Anchor Point Tool (click and drag to delete points in rectangle)
106 Marquee - define area to convert
107 Lasso - define area to convert
108 Magic Wand - define area to convert
109 Eyedropper - sample image color
110 Pencil - touch-up image
111 Eraser - touch-up image
112 Line - touch-up image
113 Batch Processing
114 Processing Image
115 Shift Marquee - adds to area
116 Control Marquee - subtracts from area
117 Both Marquee - get intersection of areas
118 Shift Lasso - adds to area
119 Control Lasso - subtracts from area
120 Both Lasso - get intersection of areas
121 Shift Wand - adds to area
122 Control Wand - subtracts from area
123 Both Wand - get intersection of areas
124 Zoom In - enlarge view (1.5x)
125 Zoom Out - reduce view (1.5x)
126 Matching Paths
127 OK to replace existing color values?
128 No matches found.
129 This has no effect unless Posterization in the Color/B&&W Setup is turned off. Do you wish to turn posterization off now?
130 Conversion method not selected
131 No paths found
132 File to Convert
133 Files to Convert
134 Clear current batch?
135 Please enter a name
136 That name is already in use, try another.
137 pass %d of %d,
138 path
139 paths
140 Files to go:
141 Saving:
142 Reading Image Data
143 Tint
144 Cyan
145 Black
146 Step %d of %d
147 Processing...
148 Sep. Shapes
149 There is at least one filename in the batch which matches another (%s). This condition may cause output files to be overwritten depending on save options. Continue anyway?
150 The maximum number of paths has been exceeded so the program has overridden the current Noise Suppression setting and discarded additional paths. Increase Noise Suppression setting or reduce the Complexity if reconverting.
152 Auto Color
153 New Option
154 New Color
155 Can't open temporary file because the scratch disk is full, locked, or unavailable.
156 The maximum number of junction points has been exceeded. Please try another conversion method or increase the Line Thinning setting.
157 Add Anchor Point Tool
158 Add/Delete Anchor Point Tool
159 Adjust Line/Move Point Tool (Shift = constrain to horz, vert, or 45 deg line)
160 Error %d opening input file.
161 Adjust Curve/Move Point Tool (Shift = circular curve)
162 The maximum number of junction points has been exceeded. Please try changing the Edge Smoothing or Complexity in Color/B&&W Setup.
163 Add Anchor Point
164 Move Anchor Point
165 Adjust Line
166 Thin More
167 Adjust Curve
169 Convert to Circle
170 Convert to Oval
171 Convert to Square
172 Convert to Rectangle
201 This color image is too wide (in pixels) for Streamline to process. Please reduce the width or the dots per inch, so that the pixel width is less than 2950 for RGB, or 2200 for CMYK.
202 K
203 Automatically generated custom colors will exceed the remaining space in the custom color list. Temporarily disable custom color creation for this conversion?
204 Pick a Custom Color
205 Files to Select
206 Save illustration as:
211 MB
212 Smoothing Pass %d, %d points removed
213 There is a problem with the acquisition module interface.
214 There is no scanner installed.
215 There is a problem with the scanner.
223 .art
224 Folder name cannot exceed 31 characters.
225 Duplicate folder name. Enter another name.
226 Software volume lock.
227 The disk is locked.
228 Cannot create a folder.
229 untitled folder
230 Invalid Acquire resource.
231 Can't open resource file.
232 Photoshop
233 Invalid Photoshop format.
234 HSL Color, HSB Color, Multichannel, and Duotone modes not supported.
235 Convert image again?
236 Defaults
237 Not enough memory. Quit other applications or increase virtual memory, and then restart Streamline.
238 Options with that name already exist. Overwrite them?
239 Outline
240 Centerline
241 Line recognition
242 Curved only
243 Straight only
244 Curved and straight
245 Medium
246 Maximum
247 None
250 Hide Tools
251 Show Tools
252 Can't delete Defaults.
253 Please choose another name. The name 'Defaults' is in use.
254 Can't rename Defaults.
255 Levels
256 Insufficient memory for Levels
257 Complexity ranges from 2 to 20 for color images. Closest value inserted.
258 Use previous dialog box and window positions?
259 All dialog box and window positions have been reset to defaults.
260 Revert to previously saved raster image?
261 Save raster image as:
262 None
263 White
264 Black
265 Process
266 Custom
267 Multiple
268 .pnt
271 ...
272 www.adobe.com/prodindex/streamline/main.html
273 %d%% Black
274 Process White
275 %dC
276 %dM
277 %dY
278 This preview is a false-color representation of the way Streamline will divide the image into sub-areas for conversion based on the current Complexity setting. Final color assignments are done after conversion based on the Posterization settings.
280 Preview Ctrl+Y
281 Artwork Ctrl+Y
301 %dK
302 Unknown Custom
305 The maximum number of Settings is 500.
306 Sorry, your serial number is incorrect. Please reenter it.
307 Select "
308 "
309 Please enter your name
310 Please enter your company name
311 Please enter the program serial number
312 That name is reserved, try another.
314 That color model isn't compatible with the image which is currently open.
315 >> Add >>
316 Open
317 Fill
322 Save changes to the raster image "%s" before closing?
323 An integer between 0 and 253 is required. Closest value inserted.
324 A value between 0.10 and 9.99 is required. Closest value inserted.
325 An integer between 2 and 255 is required. Closest value inserted.
326 Progress
327 Hide Info
328 Show Info
329 Undo
330 Redo
331 Untitled
332 Bitmap
333 Gray scale
334 RGB
335 CMYK
336 Bitmap file
337 MacPaint
338 PICT file
339 TIFF
340 Photoshop 2.0
341 Photoshop 3.0
342 Yes
343 No
344 Marquee
345 Lasso
346 Magic Wand
347 Select All
348 Select None
349 Select Inverse
350 Grow Selection
351 Select Similar
352 Clear
353 Preparing data for clipboard
354 Convert
356 Converting 16 bits per color layer to 8.
357 Posterizing
358 Smooth Direction Points
359 Store Conversion
360 Startup
361 Converting an earlier version of Adobe Streamline¬ Prefs.
362 This development version of Streamline has expired and can no longer run.
363 Can't export colors. Check that there is adequate space left on the disk and that any file being replaced isn't open or locked.
364 %d source colors
365 %d colors to import
366 Finding best custom color for layer...
367 Finding best custom color tint for layer...
368 Tag
369 Untag
370 You need to "tag" at least two custom colors to perform a conversion with tagged colors only. Check the Color/B&&W Setup dialog box and tag colors with the Custom Color dialog box.
371 You need to have at least two custom colors to perform a conversion that fills paths with custom colors. Check the Color/B&&W Setup dialog box or add/import more custom colors.
372 Use Tagged Custom Colors
373 Use Custom Colors
374 Use Most Common Colors
375 Use Average Colors
376 Use Black
377 New color...
378 Save color...
379 Delete the color "%s"?
380 Streamline can't open the selected file. Check that you have access and try again.
381 Streamline can't locate the file: "%s". Would you like to use Streamline's internal default custom colors?
382 Complexity:
383 Reduce Detail:
384 Color Averaging:
385 Threshold:
386 Contrast:
387 Boost:
388 Color Conversion
389 Black && White Conversion
401 Adobe Streamline
402 Unknown Output File Format
403 Downsample Color and Grayscale 2:1
404 Note: Any changes will not take effect until Streamline is restarted.
405 Import Colors
406 Export Colors
407 Export tagged colors only
408 All Files
409 Ctrl+Z
410 Question
411 Acquire
412 Select Plugin Directory
413 Enhanced Metafile
501 Donn Gladstone, Steve Myers, Sumeet Pasricha, and Kevin Connor
503 ⌐1988-96 Adobe Systems Incorporated. All rights reserved. Adobe Streamline is a trademark
504 of Adobe Systems Incorporated which may be registered in certain jurisdictions.
506 PRODUCT DEVELOPMENT|
507 Engineering| Ñ Donn Gladstone, Steve Myers, Sumeet Pasricha
