<script>on mouseUppush cardvisual effect iris opengo to card "help"end mouseUp</script>
</part>
<part>
<id>5</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>82</left>
<top>291</top>
<right>111</right>
<bottom>318</bottom>
</rect>
<style>shadow</style>
<showName> <false /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>19678</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>…</name>
<script>on mouseDownvisual effect iris opengo to card "About"end mouseDown</script>
</part>
<part>
<id>46</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>367</left>
<top>98</top>
<right>432</right>
<bottom>114</bottom>
</rect>
<style>radiobutton</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>RIT On</name>
<script>on mouseUpshow background field "RIT/meter"set hilite of card button "RIT off" to falseset hilite of button "RIT on" to truesendSPort 1,false,RT1sendSPort 1,false,";"end mouseUp</script>
</part>
<part>
<id>47</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>367</left>
<top>115</top>
<right>432</right>
<bottom>131</bottom>
</rect>
<style>radiobutton</style>
<showName> <true /> </showName>
<highlight> <true /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>RIT Off</name>
<script>on mouseUphide background field "RIT/meter"set hilite of card button "RIT on" to falseset hilite of button "RIT off" to truesendSPort 1,false,RT0sendSPort 1,false,";"end mouseUp</script>
</part>
<part>
<id>48</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>433</left>
<top>98</top>
<right>498</right>
<bottom>114</bottom>
</rect>
<style>radiobutton</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>XIT On</name>
<script>on mouseUpshow background field "XIT/meter"set hilite of card button "XIT off" to falseset hilite of button "XIT on" to truesendSPort 1,false,XT1sendSPort 1,false,";"end mouseUp</script>
</part>
<part>
<id>49</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>433</left>
<top>115</top>
<right>498</right>
<bottom>131</bottom>
</rect>
<style>radiobutton</style>
<showName> <true /> </showName>
<highlight> <true /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>XIT Off</name>
<script>on mouseUphide background field "XIT/meter"set hilite of card button "XIT on" to falseset hilite of button "XIT off" to truesendSPort 1,false,XT0sendSPort 1,false,";"end mouseUp</script>
</part>
<part>
<id>50</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>367</left>
<top>134</top>
<right>432</right>
<bottom>150</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>UP</name>
<script>on mouseDownsendSPort 1,false,AI0sendSPort 1,false,";"put "UP" into line 1 of background field "RIT/XIT"repeat while the mouse is downsendSPort 1,false,RUsendSPort 1,false,";"wait for 4 ticksend repeatwait for 5 tickssendSPort 1,false,AI1sendSPort 1,false,";"end mouseDown</script>
</part>
<part>
<id>51</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>435</left>
<top>133</top>
<right>500</right>
<bottom>149</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>DOWN</name>
<script>on mouseDownsendSPort 1,false,AI0sendSPort 1,false,";"put "DWN" into line 1 of background field "RIT/XIT"repeat while the mouse is downsendSPort 1,false,RDsendSPort 1,false,";"wait for 4 ticksend repeatwait for 5 tickssendSPort 1,false,AI1sendSPort 1,false,";"end mouseDown</script>
<script>on mouseUpglobal modeif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifif hilite of button "USB" is false thenfixSlopeput 0 into card field "VBT"global VBTCutput 0 into VBTcutend ifset hilite of button "USB" to falseset hilite of button "CW" to falseset hilite of button "AM" to falseset hilite of button "FM" to falseset hilite of button "FSK" to falseset hilite of button "LSB" to trueput LSB into modesendSPort 1,false,MD1sendSPort 1,false,";"end mouseUpon fixSlopeglobal slopeMeterput 011111111111111111111111111111110 into slopeMeterif the hilite of button "Graph Off" is true then exit fixSlopeset the lockscreen to trueset the UserLevel to 5global slopeMeterset the editBkgnd to truechoose brush toolset the brush to 17set the pattern to 12put 21 into xput 20 into yrepeat 31drag from x,y to x,yput x+4 into xend repeatchoose browse toolset the editBkgnd to falseset the lockscreen to falseend fixSlope</script>
</part>
<part>
<id>54</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>201</left>
<top>296</top>
<right>248</right>
<bottom>313</bottom>
</rect>
<style>radiobutton</style>
<showName> <true /> </showName>
<highlight> <true /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>USB</name>
<script>on mouseUpglobal modeif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifif hilite of button "LSB" is false thenfixSlopeput 0 into card field "VBT"global VBTcutput 0 into VBTcutend ifset hilite of button "CW" to falseset hilite of button "AM" to falseset hilite of button "FM" to falseset hilite of button "FSK" to falseset hilite of button "LSB" to falseset hilite of button "USB" to trueput USB into modesendSPort 1,false,MD2sendSPort 1,false,";"end mouseUpon fixSlopeglobal slopeMeterput 011111111111111111111111111111110 into slopeMeterif the hilite of button "Graph Off" is true then exit fixSlopeset the lockscreen to trueset the UserLevel to 5global slopeMeterset the editBkgnd to truechoose brush toolset the brush to 17set the pattern to 12put 21 into xput 20 into yrepeat 31drag from x,y to x,yput x+4 into xend repeatchoose browse toolset the editBkgnd to falseset the lockscreen to falseend fixSlope</script>
</part>
<part>
<id>55</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>201</left>
<top>312</top>
<right>248</right>
<bottom>329</bottom>
</rect>
<style>radiobutton</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>CW</name>
<script>on mouseUpglobal modeif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifif hilite of button "LSB" or hilite of button "USB" is true thenfixSlopeput 0 into card field "slopeLow"global lowCutput 0 into lowCutput 0 into card field "slopeHigh"global highCutput 0 into highCutend ifset hilite of button "AM" to falseset hilite of button "FM" to falseset hilite of button "FSK" to falseset hilite of button "LSB" to falseset hilite of button "USB" to falsesendSPort 1,false,MD3sendSPort 1,false,";"sendSPort 1,false,VBsendSPort 1,false,00sendSPort 1,false,";"set hilite of button "CW" to trueput CW into modefixSlopeend mouseUpon fixSlopeglobal slopeMeterput 011111111111111111111111111111110 into slopeMeterif the hilite of button "Graph Off" is true then exit fixSlopeset the lockscreen to trueset the UserLevel to 5global slopeMeterset the editBkgnd to truechoose brush toolset the brush to 17set the pattern to 12put 21 into xput 20 into yrepeat 31drag from x,y to x,yput x+4 into xend repeatchoose browse toolset the editBkgnd to falseset the lockscreen to falseend fixSlope</script>
</part>
<part>
<id>56</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>270</left>
<top>279</top>
<right>314</right>
<bottom>296</bottom>
</rect>
<style>radiobutton</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>AM</name>
<script>on mouseUpglobal modeif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifif hilite of button "LSB" or hilite of button "USB"¬is true thenfixSlopeput 0 into card field "slopeLow"global lowCutput 0 into lowCutput 0 into card field "slopeHigh"global highCutput 0 into highCutend ifset hilite of button "FM" to falseset hilite of button "FSK" to falseset hilite of button "LSB" to falseset hilite of button "USB" to falseset hilite of button "CW" to falsesendSPort 1,false,MD5sendSPort 1,false,";"sendSPort 1,false,VBsendSPort 1,false,00sendSPort 1,false,";"set hilite of button "AM" to trueput AM into modeend mouseUpon fixSlopeglobal slopeMeterput 011111111111111111111111111111110 into slopeMeterif the hilite of button "Graph Off" is true then exit fixSlopeset the lockscreen to trueset the UserLevel to 5global slopeMeterset the editBkgnd to truechoose brush toolset the brush to 17set the pattern to 12put 21 into xput 20 into yrepeat 31drag from x,y to x,yput x+4 into xend repeatchoose browse toolset the editBkgnd to falseset the lockscreen to falseend fixSlope</script>
</part>
<part>
<id>57</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>270</left>
<top>295</top>
<right>317</right>
<bottom>312</bottom>
</rect>
<style>radiobutton</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>FM</name>
<script>on mouseUpglobal modeif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifshow card field "blankMeter"put 0 into card field "slopeLow"global lowCutput 0 into lowCutput 0 into card field "slopeHigh"global highCutput 0 into highCutput 0 into card field "VBT"global VBTcutput 0 into VBTcutset hilite of button "FSK" to falseset hilite of button "LSB" to falseset hilite of button "USB" to falseset hilite of button "CW" to falseset hilite of button "AM" to falseset hilite of button "FM" to trueput FM into modesendSPort 1,false,MD4sendSPort 1,false,";"end mouseUp</script>
</part>
<part>
<id>58</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>270</left>
<top>311</top>
<right>317</right>
<bottom>328</bottom>
</rect>
<style>radiobutton</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>FSK</name>
<script>on mouseUpglobal modeif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifif hilite of button "LSB" or hilite of button "USB" is true thenfixSlopeput 0 into card field "slopeLow"global lowCutput 0 into lowCutput 0 into card field "slopeHigh"global highCutput 0 into highCutend ifset hilite of button "LSB" to falseset hilite of button "USB" to falseset hilite of button "CW" to falseset hilite of button "AM" to falseset hilite of button "FM" to falsesendSPort 1,false,MD6sendSPort 1,false,";"sendSPort 1,false,VBsendSPort 1,false,00sendSPort 1,false,";"set hilite of button "FSK" to trueput FSK into modeend mouseUpon fixSlopeglobal slopeMeterput 011111111111111111111111111111110 into slopeMeterif the hilite of button "Graph Off" is true then exit fixSlopeset the lockscreen to trueset the UserLevel to 5global slopeMeterset the editBkgnd to truechoose brush toolset the brush to 17set the pattern to 12put 21 into xput 20 into yrepeat 31drag from x,y to x,yput x+4 into xend repeatchoose browse toolset the editBkgnd to falseset the lockscreen to falseend fixSlope</script>
</part>
<part>
<id>63</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>369</left>
<top>224</top>
<right>423</right>
<bottom>239</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>A=B</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifsendSPort 1,false,FAsendSPort 1,false,";"put recvUpTo(1,return,90,false,false) into theAStringput char 3 to 13 of theAString into freqAsendSPort 1,false,FBsendSPort 1,false,";"put recvUpTo(1,return,90,false,false) into theBStringput char 3 to 13 of theBString into freqBput freqB into messageif the visible of background field "VFO-A/meter" is true thensendSPort 1,false,FBsendSPort 1,false,freqAsendSPort 1,false,";"end ifif the visible of background field "VFO-B/meter" is true thensendSPort 1,false,FAsendSPort 1,false,freqBsendSPort 1,false,";"end ifend mouseUp</script>
</part>
<part>
<id>64</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>435</left>
<top>206</top>
<right>502</right>
<bottom>221</bottom>
</rect>
<style>checkbox</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>F-LOCK</name>
<script>on mouseUpif the visible of background field "F-LOCK/meter" is true thensendSPort 1,false,LK0sendSPort 1,false,";"set the visible of background field "F-LOCK/meter" to falseset the hilite of button "F-lock" to falseexit mouseUpend ifif the visible of background field "F-LOCK/meter" is false thensendSPort 1,false,LK1sendSPort 1,false,";"set the visible of background field "F-LOCK/meter" to trueset the hilite of button "F-Lock" to trueexit mouseUpend ifend mouseUp</script>
</part>
<part>
<id>65</id>
<type>button</type>
<visible> <false /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>435</left>
<top>242</top>
<right>503</right>
<bottom>257</bottom>
</rect>
<style>checkbox</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>T-F SET</name>
<script>on mouseUpglobal Aglobal Bglobal freqAglobal freqBsendSPort 1,false,FAsendSPort 1,false,";"put recvUpTo(1,return,90,false,false) into theAStringput char 3 to 13 of theAString into freqAsendSPort 1,false,FBsendSPort 1,false,";"put recvUpTo(1,return,90,false,false) into theBStringput char 3 to 13 of theBString into freqBIf hilite of card button "T-F SET" is true thenif the visible of background field "VFO-A/meter" is true then ¬put 1 into Aif the visible of background field "VFO-B/meter" is true then ¬put 1 into Bget Aif It = 1 thenhide background field "VFO-A/meter"show background field "VFO-B/meter"sendSPort 1,false,FN1sendSPort 1,false,";"sendSPort 1,false,FBsendSPort 1,false,freqBsendSPort 1,false,";"end ifget Bif It = 1 thenhide background field "VFO-B/meter"show background field "VFO-A/meter"sendSPort 1,false,FN0sendSPort 1,false,";"sendSPort 1,false,FAsendSPort 1,false,freqAsendSPort 1,false,";"put freqA into messageend ifend ifIf hilite of card button "T-F SET" is false thenget Aif It = 1 thenhide background field "VFO-B/meter"show background field "VFO-A/meter"sendSPort 1,false,FN0sendSPort 1,false,";"sendSPort 1,false,FAsendSPort 1,false,freqAsendSPort 1,false,";"end ifget Bif It = 1 thenhide background field "VFO-A/meter"show background field "VFO-B/meter"sendSPort 1,false,FN1sendSPort 1,false,";"sendSPort 1,false,FBsendSPort 1,false,freqBsendSPort 1,false,";"end ifend ifend mouseUp</script>
<script>on mouseDownsendSPort 1,false,FAsendSPort 1,false,";"put recvUpTo(1,return,90,false,false) into theStringput "A " &¬char 6 to 7 of theString &"."¬& char 8 to 10 of theString &"."¬& char 11 to 12 of theString¬into background field "sub-display"sendSPort 1,false,FBsendSPort 1,false,";"put recvUpTo(1,return,90,false,false) into theStringput "B " &¬char 6 to 7 of theString &"."¬& char 8 to 10 of theString &"."¬& char 11 to 12 of theString¬into line 2 of background field "sub-display"repeat while the mouse is downshow field "sub-display"end repeathide field "sub-display"end mouseDown</script>
</part>
<part>
<id>70</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>435</left>
<top>223</top>
<right>502</right>
<bottom>240</bottom>
</rect>
<style>checkbox</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>SPLIT</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifif visible of background field "SPLIT/meter" is false thenshow background field "SPLIT/meter"set hilite of button "Split" to truehide card field "dimTF"show card button "T-F SET"sendSPort 1,false,SP1sendSPort 1,false,";"exit mouseUpend ifif visible of background field "SPLIT/meter" is true thenhide background field "SPLIT/meter"set hilite of button "split" to falseshow card field "dimTF"hide card button "T-F SET"sendSPort 1,false,SP0sendSPort 1,false,";"end ifend mouseUp</script>
</part>
<part>
<id>90</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>9</left>
<top>106</top>
<right>44</right>
<bottom>131</bottom>
</rect>
<style>roundrect</style>
<showName> <false /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>22308</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>lowSlopeUp</name>
<script>on mouseDownif the hilite of card button "FM" is true thenanswer "Slope and VBT Do Not Function In FM!" with "73!"exit mouseDownend ifif the hilite of card button "USB" is false and¬the hilite of card button "LSB" is false thenanswer "Slope Is A SSB-Only Function!" with "73!"exit mouseDownend ifglobal slopeMeterglobal lowCutput 0 into xput 0 into yput 0 into zput 1 into markerrepeat while the mouse is downput lowCut + 1 into lowCutIf lowCut > 16 then put 16 into lowCutput round (lowCut/16 * 100) into counterif counter < 10 then put 0 into counterput counter into card field "SlopeLow"put (lowCut * 2) into meterif meter < 4 then put 0 into meterif meter > 31 then put 31 into metersendSPort 1,false,SLif meter < 10 then sendSPort 1, false, 0sendSPort 1, false, metersendSPort 1,false,";"end repeatrepeat 16put z+1 into zput 1 into char z of slopeMeterend repeatput 1 into zrepeat lowCutput 0 into char z of slopeMeterput z+1 into zend repeatif hilite of button "Graph Off" is true then exit mouseDownset the lockscreen to trueset the cursor to 4set the editBkgnd to trueset the lockscreen to truerepeat 33if char marker of slopeMeter = 0 thenchoose brush toolset the brush to 17set the pattern to 1put ((marker - 1) * 4) + 17 into xput 20 into ydrag from x,y to x,yput marker + 1 into markerend ifif char marker of slopeMeter = 1 thenchoose brush toolset the brush to 17set the pattern to 12put ((marker - 1) * 4) + 17 into xput 20 into ydrag from x,y to x,yput marker + 1 into markerend ifend repeatset the editBKgnd to falsechoose browse toolset the lockscreen to falseend mouseDown</script>
</part>
<part>
<id>93</id>
<type>field</type>
<visible> <true /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <true /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <true /> </lockText>
<rect>
<left>90</left>
<top>110</top>
<right>129</right>
<bottom>132</bottom>
</rect>
<style>rectangle</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <false /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Geneva</font>
<textSize>14</textSize>
<textStyle>shadow</textStyle>
<textHeight>18</textHeight>
<name>SlopeLow</name>
<script></script>
</part>
<part>
<id>95</id>
<type>field</type>
<visible> <true /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <true /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <true /> </lockText>
<rect>
<left>90</left>
<top>146</top>
<right>129</right>
<bottom>168</bottom>
</rect>
<style>rectangle</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <false /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Geneva</font>
<textSize>14</textSize>
<textStyle>shadow</textStyle>
<textHeight>18</textHeight>
<name>SlopeHigh</name>
<script></script>
</part>
<part>
<id>96</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>8</left>
<top>142</top>
<right>43</right>
<bottom>167</bottom>
</rect>
<style>roundrect</style>
<showName> <false /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>22308</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>highSlopeUp</name>
<script>on mouseDownif the hilite of card button "FM" is true thenanswer "Slope and VBT Do Not Function In FM!" with "73!"exit mouseDownend ifif the hilite of card button "USB" is false and¬the hilite of card button "LSB" is false thenanswer "Slope Is A SSB-Only Function!" with "73!"exit mouseDownend ifglobal slopeMeterglobal highCutput 0 into xput 0 into yput 16 into zput 1 into markerrepeat while the mouse is downput highCut + 1 into highCutIf highCut > 16 then put 16 into highCutput round (highCut/16 * 100) into counterif counter < 10 then put 0 into counterput counter into card field "SlopeHigh"put (highCut * 2) into meterif meter < 4 then put 0 into meterif meter > 31 then put 31 into metersendSPort 1,false,SHif meter < 10 then sendSPort 1, false, 0sendSPort 1, false, metersendSPort 1,false,";"end repeatrepeat 16put z+1 into zput 1 into char z of slopeMeterend repeatput 33 into zrepeat highCutput 0 into char z of slopeMeterput z-1 into zend repeatif hilite of button "Graph Off" is true then exit mouseDownset the lockscreen to trueset the cursor to 4set the editBkgnd to truerepeat 33if char marker of slopeMeter = 0 thenchoose brush toolset the brush to 17set the pattern to 1put ((marker - 1) * 4) + 17 into xput 20 into ydrag from x,y to x,yput marker + 1 into markerend ifif char marker of slopeMeter = 1 thenchoose brush toolset the brush to 17set the pattern to 12put ((marker - 1) * 4) + 17 into xput 20 into ydrag from x,y to x,yput marker + 1 into markerend ifend repeatset the editBKgnd to falsechoose browse toolset the lockscreen to falseend mouseDown</script>
</part>
<part>
<id>97</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>45</left>
<top>142</top>
<right>80</right>
<bottom>167</bottom>
</rect>
<style>roundrect</style>
<showName> <false /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>19381</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>highSlopeDown</name>
<script>on mouseDownif the hilite of card button "FM" is true thenanswer "Slope and VBT Do Not Function In FM!" with "73!"exit mouseDownend ifif the hilite of card button "USB" is false and¬the hilite of card button "LSB" is false thenanswer "Slope Is A SSB-Only Function!" with "73!"exit mouseDownend ifglobal slopeMeterglobal highCutput 0 into xput 0 into yput 16 into zput 1 into markerrepeat while the mouse is downput highCut - 1 into highCutIf highCut < 1 then put 1 into highCutput round (highCut/16 * 100) into counterif counter < 10 then put 0 into counterput counter into card field "SlopeHigh"put (highCut * 2) into meterif meter < 4 then put 0 into meterif meter > 31 then put 31 into metersendSPort 1,false,SHif meter < 10 then sendSPort 1, false, 0sendSPort 1, false, metersendSPort 1,false,";"end repeatrepeat 16put z+1 into zput 1 into char z of slopeMeterend repeatput 33 into zrepeat highCutput 0 into char z of slopeMeterput z-1 into zend repeatif hilite of button "Graph Off" is true then exit mouseDownset the lockscreen to trueset the cursor to 4set the editBkgnd to truerepeat 33if char marker of slopeMeter = 0 thenchoose brush toolset the brush to 17set the pattern to 1put ((marker - 1) * 4) + 17 into xput 20 into ydrag from x,y to x,yput marker + 1 into markerend ifif char marker of slopeMeter = 1 thenchoose brush toolset the brush to 17set the pattern to 12put ((marker - 1) * 4) + 17 into xput 20 into ydrag from x,y to x,yput marker + 1 into markerend ifend repeatset the editBKgnd to falsechoose browse toolset the lockscreen to falseend mouseDown</script>
</part>
<part>
<id>101</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>11</left>
<top>200</top>
<right>46</right>
<bottom>225</bottom>
</rect>
<style>roundrect</style>
<showName> <false /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>22308</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>VBTup</name>
<script>on mouseDownif the hilite of card button "FM" is true thenanswer "Slope and VBT Do Not Function In FM!" with "73!"exit mouseDownend ifif the hilite of card button "USB" is true or¬the hilite of card button "LSB" is true thenanswer "VBT Is Not A SSB Function!" with "73!"exit mouseDownend ifglobal slopeMeterglobal VBTCutput 0 into xput 0 into yput 0 into zput 1 into markerrepeat while the mouse is downput VBTCut + 1 into VBTCutIf VBTCut > 16 then put 16 into VBTCutput round (VBTCut/16 * 100) into counterif counter < 10 then put 0 into counterput counter into card field "VBT"put (VBTCut * 2) into meterif meter < 4 then put 0 into meterif meter > 31 then put 31 into metersendSPort 1,false,VBif meter < 10 then sendSPort 1, false, 0sendSPort 1, false, metersendSPort 1,false,";"end repeatrepeat 33put z+1 into zput 1 into char z of slopeMeterend repeatput 0 into zrepeat VBTCutput z+1 into zput 0 into char z of slopeMeterend repeatput 33 into zrepeat VBTcutput 0 into char z of slopeMeterput z-1 into zend repeatif hilite of button "Graph Off" is true then exit mouseDownset the lockscreen to trueset the cursor to 4set the editBkgnd to truerepeat 33if char marker of slopeMeter = 0 thenchoose brush toolset the brush to 17set the pattern to 1put ((marker - 1) * 4) + 17 into xput 20 into ydrag from x,y to x,yput marker + 1 into markerend ifif char marker of slopeMeter = 1 thenchoose brush toolset the brush to 17set the pattern to 12put ((marker - 1) * 4) + 17 into xput 20 into ydrag from x,y to x,yput marker + 1 into markerend ifend repeatset the editBKgnd to falsechoose browse toolset the lockscreen to falseend mouseDown</script>
</part>
<part>
<id>102</id>
<type>field</type>
<visible> <true /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <true /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <true /> </lockText>
<rect>
<left>90</left>
<top>202</top>
<right>129</right>
<bottom>224</bottom>
</rect>
<style>rectangle</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <false /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Geneva</font>
<textSize>14</textSize>
<textStyle>shadow</textStyle>
<textHeight>18</textHeight>
<name>VBT</name>
<script></script>
</part>
<part>
<id>103</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>48</left>
<top>200</top>
<right>83</right>
<bottom>225</bottom>
</rect>
<style>roundrect</style>
<showName> <false /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>19381</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>VBTdown</name>
<script>on mouseDownif the hilite of card button "FM" is true thenanswer "Slope and VBT Do Not Function In FM!" with "73!"exit mouseDownend ifif the hilite of card button "USB" is true or¬the hilite of card button "LSB" is true thenanswer "VBT Is Not A SSB Function!" with "73!"exit mouseDownend ifglobal slopeMeterglobal VBTCutput 0 into xput 0 into yput 0 into zput 1 into markerrepeat while the mouse is downput VBTCut - 1 into VBTCutIf VBTCut < 1 then put 1 into VBTCutput round (VBTCut/16 * 100) into counterif counter < 10 then put 0 into counterput counter into card field "VBT"put (VBTCut * 2) into meterif meter < 4 then put 0 into meterif meter > 31 then put 31 into metersendSPort 1,false,VBif meter < 10 then sendSPort 1, false, 0sendSPort 1, false, metersendSPort 1,false,";"end repeatrepeat 33put z+1 into zput 1 into char z of slopeMeterend repeatput 0 into zrepeat VBTCutput z+1 into zput 0 into char z of slopeMeterend repeatput 33 into zrepeat VBTcutput 0 into char z of slopeMeterput z-1 into zend repeatif hilite of button "Graph Off" is true then exit mouseDownset the lockscreen to trueset the cursor to 4set the editBkgnd to truerepeat 33if char marker of slopeMeter = 0 thenchoose brush toolset the brush to 17set the pattern to 1put ((marker - 1) * 4) + 17 into xput 20 into ydrag from x,y to x,yput marker + 1 into markerend ifif char marker of slopeMeter = 1 thenchoose brush toolset the brush to 17set the pattern to 12put ((marker - 1) * 4) + 17 into xput 20 into ydrag from x,y to x,yput marker + 1 into markerend ifend repeatset the editBKgnd to falsechoose browse toolset the lockscreen to falseend mouseDown</script>
</part>
<part>
<id>118</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>1</left>
<top>240</top>
<right>33</right>
<bottom>261</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>1.5</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifset the lockscreen to trueput 0 into char 1 of background field "Frequency"put 1 into char 2 of background field "Frequency"put 5 into char 4 of background field "Frequency"put char 1 to 2 of background field "Frequency" &¬char 4 to 6 of background field "Frequency" &¬char 8 to 9 of background field "Frequency" into freqif the visible of background field "VFO-A/meter" is true thensendSPort 1,false,FAend ifif the visible of background field "VFO-B/meter" is true thensendSPort 1,false,FBend ifsendSPort 1,false,000sendSPort 1,false,freqsendSPort 1,false,0sendSPort 1,false,";"set the lockscreen to falseend mouseUp</script>
</part>
<part>
<id>119</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>34</left>
<top>240</top>
<right>66</right>
<bottom>261</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>3.5</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifset the lockscreen to trueput 0 into char 1 of background field "Frequency"put 3 into char 2 of background field "Frequency"put 5 into char 4 of background field "Frequency"put char 1 to 2 of background field "Frequency" &¬char 4 to 6 of background field "Frequency" &¬char 8 to 9 of background field "Frequency" into freqif the visible of background field "VFO-A/meter" is true thensendSPort 1,false,FAend ifif the visible of background field "VFO-B/meter" is true thensendSPort 1,false,FBend ifsendSPort 1,false,000sendSPort 1,false,freqsendSPort 1,false,0sendSPort 1,false,";"set the lockscreen to falseend mouseUp</script>
</part>
<part>
<id>120</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>68</left>
<top>240</top>
<right>100</right>
<bottom>261</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>7</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifset the lockscreen to trueput 0 into char 1 of background field "Frequency"put 7 into char 2 of background field "Frequency"put char 1 to 2 of background field "Frequency" &¬char 4 to 6 of background field "Frequency" &¬char 8 to 9 of background field "Frequency" into freqif the visible of background field "VFO-A/meter" is true thensendSPort 1,false,FAend ifif the visible of background field "VFO-B/meter" is true thensendSPort 1,false,FBend ifsendSPort 1,false,000sendSPort 1,false,freqsendSPort 1,false,0sendSPort 1,false,";"set the lockscreen to falseend mouseUp</script>
</part>
<part>
<id>121</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>102</left>
<top>240</top>
<right>134</right>
<bottom>261</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>10</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifset the lockscreen to trueput 1 into char 1 of background field "Frequency"put 0 into char 2 of background field "Frequency"put char 1 to 2 of background field "Frequency" &¬char 4 to 6 of background field "Frequency" &¬char 8 to 9 of background field "Frequency" into freqif the visible of background field "VFO-A/meter" is true thensendSPort 1,false,FAend ifif the visible of background field "VFO-B/meter" is true thensendSPort 1,false,FBend ifsendSPort 1,false,000sendSPort 1,false,freqsendSPort 1,false,0sendSPort 1,false,";"set the lockscreen to falseend mouseUp</script>
</part>
<part>
<id>122</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>137</left>
<top>240</top>
<right>169</right>
<bottom>261</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>14</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifset the lockscreen to trueput 1 into char 1 of background field "Frequency"put 4 into char 2 of background field "Frequency"put char 1 to 2 of background field "Frequency" &¬char 4 to 6 of background field "Frequency" &¬char 8 to 9 of background field "Frequency" into freqif the visible of background field "VFO-A/meter" is true thensendSPort 1,false,FAend ifif the visible of background field "VFO-B/meter" is true thensendSPort 1,false,FBend ifsendSPort 1,false,000sendSPort 1,false,freqsendSPort 1,false,0sendSPort 1,false,";"set the lockscreen to falseend mouseUp</script>
</part>
<part>
<id>123</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>0</left>
<top>263</top>
<right>32</right>
<bottom>284</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>18</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifset the lockscreen to trueput 1 into char 1 of background field "Frequency"put 8 into char 2 of background field "Frequency"put char 1 to 2 of background field "Frequency" &¬char 4 to 6 of background field "Frequency" &¬char 8 to 9 of background field "Frequency" into freqif the visible of background field "VFO-A/meter" is true thensendSPort 1,false,FAend ifif the visible of background field "VFO-B/meter" is true thensendSPort 1,false,FBend ifsendSPort 1,false,000sendSPort 1,false,freqsendSPort 1,false,0sendSPort 1,false,";"set the lockscreen to falseend mouseUp</script>
</part>
<part>
<id>124</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>34</left>
<top>264</top>
<right>66</right>
<bottom>285</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>21</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifset the lockscreen to trueput 2 into char 1 of background field "Frequency"put 1 into char 2 of background field "Frequency"put char 1 to 2 of background field "Frequency" &¬char 4 to 6 of background field "Frequency" &¬char 8 to 9 of background field "Frequency" into freqif the visible of background field "VFO-A/meter" is true thensendSPort 1,false,FAend ifif the visible of background field "VFO-B/meter" is true thensendSPort 1,false,FBend ifsendSPort 1,false,000sendSPort 1,false,freqsendSPort 1,false,0sendSPort 1,false,";"set the lockscreen to falseend mouseUp</script>
</part>
<part>
<id>125</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>68</left>
<top>264</top>
<right>100</right>
<bottom>285</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>24.5</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifset the lockscreen to trueput 2 into char 1 of background field "Frequency"put 4 into char 2 of background field "Frequency"put 5 into char 4 of background field "Frequency"put char 1 to 2 of background field "Frequency" &¬char 4 to 6 of background field "Frequency" &¬char 8 to 9 of background field "Frequency" into freqif the visible of background field "VFO-A/meter" is true thensendSPort 1,false,FAend ifif the visible of background field "VFO-B/meter" is true thensendSPort 1,false,FBend ifsendSPort 1,false,000sendSPort 1,false,freqsendSPort 1,false,0sendSPort 1,false,";"set the lockscreen to falseend mouseUp</script>
</part>
<part>
<id>126</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>102</left>
<top>264</top>
<right>134</right>
<bottom>285</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>28</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifset the lockscreen to trueput 2 into char 1 of background field "Frequency"put 8 into char 2 of background field "Frequency"put char 1 to 2 of background field "Frequency" &¬char 4 to 6 of background field "Frequency" &¬char 8 to 9 of background field "Frequency" into freqif the visible of background field "VFO-A/meter" is true thensendSPort 1,false,FAend ifif the visible of background field "VFO-B/meter" is true thensendSPort 1,false,FBend ifsendSPort 1,false,000sendSPort 1,false,freqsendSPort 1,false,0sendSPort 1,false,";"set the lockscreen to falseend mouseUp</script>
</part>
<part>
<id>127</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>137</left>
<top>264</top>
<right>169</right>
<bottom>285</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>29</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifset the lockscreen to trueput 2 into char 1 of background field "Frequency"put 9 into char 2 of background field "Frequency"put char 1 to 2 of background field "Frequency" &¬char 4 to 6 of background field "Frequency" &¬char 8 to 9 of background field "Frequency" into freqif the visible of background field "VFO-A/meter" is true thensendSPort 1,false,FAend ifif the visible of background field "VFO-B/meter" is true thensendSPort 1,false,FBend ifsendSPort 1,false,000sendSPort 1,false,freqsendSPort 1,false,0sendSPort 1,false,";"set the lockscreen to falseend mouseUp</script>
</part>
<part>
<id>128</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>0</left>
<top>288</top>
<right>38</right>
<bottom>319</bottom>
</rect>
<style>roundrect</style>
<showName> <false /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>4895</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>UpMHz</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of button "UpMHz" to falseexit mouseUpend ifset the lockscreen to trueput char 1 to 2 of background field "Frequency" &¬char 4 to 6 of background field "Frequency" &¬char 8 to 9 of background field "Frequency" into freqget char 2 of freqif (it + 1) < 10 thenput it + 1 into char 2 of freqelseput 0 into char 2 of freqget char 1 of freqput it + 1 into char 1 of freqend ifsendSPort 1,false,Fif the visible of background field "VFO-A/meter" is true¬then sendSPort 1,false,Aif the visible of background field "VFO-B/meter" is true then¬sendSPort 1,false,BsendSPort 1,false,000sendSPort 1,false,freqsendSPort 1,false,0sendSPort 1,false,";"set the lockscreen to falseend mouseUp</script>
</part>
<part>
<id>129</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>42</left>
<top>289</top>
<right>80</right>
<bottom>320</bottom>
</rect>
<style>roundrect</style>
<showName> <false /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>6724</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>downMHz</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of button "downMHz" to falseexit mouseUpend ifset the lockscreen to trueput char 1 to 2 of background field "Frequency" &¬char 4 to 6 of background field "Frequency" &¬char 8 to 9 of background field "Frequency" into freqget char 2 of freqif (it - 1) > -1 thenput it - 1 into char 2 of freqelseput 9 into char 2 of freqget char 1 of freqput it - 1 into char 1 of freqend ifsendSPort 1,false,Fif the visible of background field "VFO-A/meter" is truethen sendSPort 1,false,Aif the visible of background field "VFO-B/meter" is truethen sendSPort 1,false,BsendSPort 1,false,000sendSPort 1,false,freqsendSPort 1,false,0sendSPort 1,false,";"set the lockscreen to falseend mouseUp</script>
</part>
<part>
<id>130</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>0</left>
<top>324</top>
<right>55</right>
<bottom>341</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>DIRECT</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifput 0 into Lask "Enter FREQUENCY As: MM.KKK.HH"if it is empty then exit mouseUpput it into freqChoiceif the length of freqChoice ≠ 9 thenformatWarnexit mouseUpend ifif char 3 of freqChoice is not "." thenformatWarnexit mouseUpend ifif char 7 of freqChoice is not "." thenformatWarnexit mouseUpend ifif char 1 to 2 of freqChoice > 30 thenfreqWarnexit mouseUpend ifif char 1 to 2 of freqChoice & char 4 to 6 of freqChoice¬& char 8 to 9 of freqChoice < 30 thenfreqWarnexit mouseUpend ifput char 1 to 2 of freqChoice & char 4 to 6 of freqChoice¬& char 8 to 9 of freqChoice into freqStringif the visible of background field "VFO-A/meter" is true thensendSPort 1,false,FAend ifif the visible of background field "VFO-B/meter" is true thensendSPort 1,false,FBend ifsendSPort 1,false,000sendSPort 1,false,freqStringsendSPort 1,false,0sendSPort 1,false,";"end mouseUpon formatWarnanswer "Use Format MM.KKK.HH Only (As In 14.230.56)"end formatWarnon freqWarnanswer "The TS-940S Covers Only 30Hz to 30MHz!"end freqWarn</script>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifget the visible of background field "VFO-A/meter"If It is true thenset the visible of field "VFO-A/meter" to falseset the visible of field "VFO-B/meter" to truesendSPort 1,false,FN1sendSPort 1,false,";"Elseset the visible of field "VFO-B/meter" to falseset the visible of field "VFO-A/meter" to truesendSPort 1,false,FN0sendSPort 1,false,";"end ifend mouseUp</script>
</part>
<part>
<id>139</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>55</left>
<top>324</top>
<right>101</right>
<bottom>341</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>RX/TX</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifget the visible of background field "RX/meter"If It is true thenset the visible of field "RX/meter" to falseset the visible of field "ON AIR/meter" to truesendSPort 1,false,TXsendSPort 1,false,";"Elseset the visible of field "ON AIR/meter" to falseset the visible of field "RX/meter" to truesendSPort 1,false,RXsendSPort 1,false,";"end ifend mouseUp</script>
</part>
<part>
<id>140</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>102</left>
<top>324</top>
<right>135</right>
<bottom>341</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>AT.T</name>
<script>on mouseUpif hilite of card button "F-LOCK" is true thenanswer "Frequency Lock is On!!" with "73!"set hilite of card button "Split" to falseexit mouseUpend ifIf the visible of field "RX/meter" is true thenset the visible of field "RX/meter" to falseset the visible of field "ON AIR/meter" to trueset the visible of field "TUNING/meter" to truesendSPort 1,false,AT1sendSPort 1,false,";"sendSPort 1,false,TXsendSPort 1,false,";"end ifput recvUpTo(1,return,90,false,false) into theStringif the length of theString > 0 thenset the visible of background field "TUNING/meter" to falsesendSPort 1,false,RXsendSPort 1,false,";"set the visible of background field "ON AIR/meter" to falseset the visible of background field "RX/meter" to trueexit mouseUpend ifIf the visible of field "ON AIR/meter" is true thenset the visible of field "TUNING/meter" to truesendSPort 1,false,AT1sendSPort 1,false,";"sendSPort 1,false,TXsendSPort 1,false,";"put recvUpTo(1,return,90,false,false) into theStringif the length of theString > 0 thenset the visible of background field "TUNING/meter" to falsesendSPort 1,false,RXsendSPort 1,false,";"set the visible of background field "ON AIR/meter" to falseset the visible of background field "RX/meter" to trueend ifend ifend mouseUp</script>
</part>
<part>
<id>145</id>
<type>field</type>
<visible> <true /> </visible>
<dontWrap> <false /> </dontWrap>
<dontSearch> <false /> </dontSearch>
<sharedText> <false /> </sharedText>
<fixedLineHeight> <true /> </fixedLineHeight>
<autoTab> <false /> </autoTab>
<lockText> <true /> </lockText>
<rect>
<left>15</left>
<top>4</top>
<right>149</right>
<bottom>34</bottom>
</rect>
<style>rectangle</style>
<autoSelect> <false /> </autoSelect>
<showLines> <false /> </showLines>
<wideMargins> <false /> </wideMargins>
<multipleLines> <false /> </multipleLines>
<reservedFamily> 0 </reservedFamily>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>left</textAlign>
<font>Geneva</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<textHeight>16</textHeight>
<name>blankMeter</name>
<script></script>
</part>
<part>
<id>148</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>46</left>
<top>106</top>
<right>82</right>
<bottom>131</bottom>
</rect>
<style>roundrect</style>
<showName> <false /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <true /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>19381</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>lowSlopeDown</name>
<script>on mouseDownif the hilite of card button "FM" is true thenanswer "Slope and VBT Do Not Function In FM!" with "73!"exit mouseDownend ifif the hilite of card button "USB" is false and¬the hilite of card button "LSB" is false thenanswer "Slope Is A SSB-Only Function!" with "73!"exit mouseDownend ifglobal slopeMeterglobal lowCutput 0 into xput 0 into yput 0 into zput 1 into markerrepeat while the mouse is downput lowCut - 1 into lowCutIf lowCut < 1 then put 1 into lowCutput round (lowCut/16 * 100) into counterif counter < 10 then put 0 into counterput counter into card field "SlopeLow"put (lowCut * 2) into meterif meter < 4 then put 0 into meterif meter > 31 then put 31 into metersendSPort 1,false,SLif meter < 10 then sendSPort 1, false, 0sendSPort 1, false, metersendSPort 1,false,";"end repeatrepeat 16put z+1 into zput 1 into char z of slopeMeterend repeatput 0 into zrepeat lowCutput z+1 into zput 0 into char z of slopeMeterend repeatif hilite of button "Graph Off" is true then exit mouseDownset the lockscreen to trueset the cursor to 4set the editBkgnd to truerepeat 33if char marker of slopeMeter = 0 thenchoose brush toolset the brush to 17set the pattern to 1put ((marker - 1) * 4) + 17 into xput 20 into ydrag from x,y to x,yput marker + 1 into markerend ifif char marker of slopeMeter = 1 thenchoose brush toolset the brush to 17set the pattern to 12put ((marker - 1) * 4) + 17 into xput 20 into ydrag from x,y to x,yput marker + 1 into markerend ifend repeatset the editBKgnd to falsechoose browse toolset the lockscreen to falseend mouseDown</script>
</part>
<part>
<id>149</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>4</left>
<top>38</top>
<right>79</right>
<bottom>57</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <false /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Graph On</name>
<script>on mouseUpglobal slopeMeterput 1 into markerset the hilite of button "Graph Off" to falseset the hilite of button "Graph On" to trueset the lockscreen to trueset the cursor to 4set the editBkgnd to trueset the lockscreen to truerepeat 33if char marker of slopeMeter = 0 thenchoose brush toolset the brush to 17set the pattern to 1put ((marker - 1) * 4) + 17 into xput 20 into ydrag from x,y to x,yput marker + 1 into markerend ifif char marker of slopeMeter = 1 thenchoose brush toolset the brush to 17set the pattern to 12put ((marker - 1) * 4) + 17 into xput 20 into ydrag from x,y to x,yput marker + 1 into markerend ifend repeatchoose browse toolset the lockscreen to falseset the editBkgnd to falsehide card field "blankMeter"end mouseUp</script>
</part>
<part>
<id>152</id>
<type>button</type>
<visible> <true /> </visible>
<reserved5> 0 </reserved5>
<reserved4> 0 </reserved4>
<reserved3> 0 </reserved3>
<reserved2> 0 </reserved2>
<reserved1> 0 </reserved1>
<enabled> <true /> </enabled>
<rect>
<left>85</left>
<top>37</top>
<right>160</right>
<bottom>57</bottom>
</rect>
<style>roundrect</style>
<showName> <true /> </showName>
<highlight> <true /> </highlight>
<autoHighlight> <false /> </autoHighlight>
<sharedHighlight> <true /> </sharedHighlight>
<family>0</family>
<titleWidth>0</titleWidth>
<icon>0</icon>
<textAlign>center</textAlign>
<font>Chicago</font>
<textSize>12</textSize>
<textStyle>plain</textStyle>
<name>Graph Off</name>
<script>on mouseUpshow card field "blankMeter"set the hilite of button "Graph On" to falseset the hilite of button "Graph Off" to trueend mouseUp</script>
<script>on mouseUpsendSPort 1,false,AI0sendSPort 1,false,";"global frequencyglobal sentglobal modeput 1 into sentput background field "Frequency" into frequencygo last card of "KQI Log"end mouseUp</script>
</part>
<content>
<layer>background</layer>
<id>1</id>
<text>..</text>
</content>
<content>
<layer>background</layer>
<id>2</id>
<text>.</text>
</content>
<content>
<layer>background</layer>
<id>9</id>
<text>RIT</text>
</content>
<content>
<layer>background</layer>
<id>10</id>
<text>XIT</text>
</content>
<content>
<layer>background</layer>
<id>5</id>
<text>VFO-A</text>
</content>
<content>
<layer>background</layer>
<id>6</id>
<text>VFO-B</text>
</content>
<content>
<layer>card</layer>
<id>93</id>
<text>0</text>
</content>
<content>
<layer>card</layer>
<id>95</id>
<text>0</text>
</content>
<content>
<layer>card</layer>
<id>102</id>
<text>0</text>
</content>
<content>
<layer>background</layer>
<id>29</id>
<text>SPLIT</text>
</content>
<content>
<layer>card</layer>
<id>135</id>
<text>T-F Set</text>
</content>
<content>
<layer>background</layer>
<id>30</id>
<text>A ..B ..</text>
</content>
<content>
<layer>background</layer>
<id>4</id>
<text>F-LOCK</text>
</content>
<content>
<layer>background</layer>
<id>7</id>
<text>MEM0O</text>
</content>
<content>
<layer>background</layer>
<id>8</id>
<text>1</text>
</content>
<content>
<layer>background</layer>
<id>31</id>
<text>ON AIR</text>
</content>
<content>
<layer>background</layer>
<id>32</id>
<text>RECEIVE</text>
</content>
<content>
<layer>background</layer>
<id>34</id>
<text>TUNING...</text>
</content>
<content>
<layer>card</layer>
<id>157</id>
<text>SLOPE</text>
</content>
<content>
<layer>card</layer>
<id>158</id>
<text>VBT</text>
</content>
<content>
<layer>card</layer>
<id>159</id>
<text>RIT / XIT</text>
</content>
<content>
<layer>card</layer>
<id>161</id>
<text>FUNCTIONS</text>
</content>
<content>
<layer>card</layer>
<id>162</id>
<text>MODES</text>
</content>
<name>KQI Control</name>
<script>on idleglobal counterglobal stringIFput recvUpTo(1,return,90,false,false) into theStringif the length of theString > 2 thenput theString into stringIFput empty into theStringend iffreqUpdateritUpdateconditionend idleon conditionglobal stringIFif char 29 of stringIF = "0" thenhide background field "ON AIR/meter"show background field "RX/meter"end ifif char 29 of stringIF= "1" thenhide background field "RX/meter"show background field "ON AIR/meter"end ifend conditionon freqUpdateglobal counterglobal stringIFput char 6 to 7 of stringIF &"."¬& char 8 to 10 of stringIF &"."¬& char 11 to 12 of stringIF¬into background field "Frequency"put char 1 to 2 of background field "Frequency" &¬char 4 to 6 of background field "Frequency" &¬char 8 to 9 of background field "Frequency" into counterend freqUpdateon ritUpdateglobal correctionglobal stringIFput char 19 to 20 of stringIF & "."¬& char 21 to 22 of stringIF¬into background field "RIT/XIT"if char 19 of stringIF = "-" thenput char 19 of stringIF & char 20 of stringIF &¬char 21 to 22 of stringIF ¬into correctionend ifif char 19 of stringIF = "+" thenput char 20 of stringIF & char 21 to 22 of stringIF ¬into correctionend ifend ritUpdateon returnKeysendSPort 1,false,message box & returnput empty into message boxend returnKeyon clearKeysendSPort 1,false,linefeedend clearKey</script>
</card>
card_4336.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<script>on mouseUpGo to card "KQI Control"end mouseUp</script>
</part>
<content>
<layer>card</layer>
<id>1</id>
<text> Talk about vertical market software: To use this program you must have not only a Macintosh (Plus, SE or II) equipped with the HyperCard program, you also need a Kenwood TS-940S amateur radio transceiver and, of course, the hardware to interface the transceiver and radio! But, I think you will agree that when you put the Mac and the TS-940S together with "KQI Control" you have one exciting step into the future of ham radio. Here's how to get the most out of using this program.-------------------------------------------------------------------FIRST: Never use your original disk! Make backups right away and use them. As many people have found out, sometimes to their horror, it is very easy to accidentally change a program written in HyperCard. Please never work with your originals.And, if you intend to use the automatic logbook, make sure both stacks -- KQI CONTROL and KQI LOG -- are in the same folder together.-------------------------------------------------------------------THE SETUPA Kenwood TS-940S usually does not leave the factory with all of the optional equipment installed for computer interfacing. You will need to purchase the Kenwood IF-10B and the Kenwood IF-232C accessories for your TS-940S (see the note at the end of this file about other Kenwood radios which can access SOME features of this program). The TS-940S manual has excellent step-by-step instructions on installing the IF-10B. However, the manual (in this author's opinion) does not stress strongly enough the amount of meticulous care you must take not to damage the very thin wires you will be working around when you install the IF-10B chip in its socket. Take plenty of time and check before you tighten shields back down that no wires are caught and you will be all right. The IF-232C interface unit simply cables (with an included cable) to the back of an IF-10B-equipped TS-940S. Once you have your TS-940S set up with the IF-10B installed internally and the the IF-232C sitting atop the rig and cabled to it, you only need a Macintosh-to-RS-232C modem cable. Make certain you buy a modem cable to go from your Macintosh to RS-232C and NOT a printer cable. Ask for a cable to go from your Macintosh to a Hayes Smartmodem. Don't press your luck and start talking about ham radios to a computer store salesperson. At best you will get a blank stare. At worst, advice that will probably be wrong. Connect the modem cable from the Mac to the IF-232C. Keep this RS-232C cable to no more than 30 feet; if you go longer it may or may not work. (There are such things as RS-232C in-line amplifiers available from many computer stores that might, however, allow much longer lengths. I have not personally tested these.) And, if you want to truly operate, from a remote distance away don't forget your cabling in the other direction. You will want to run speaker wires from the rig to a remote speaker, and you may even want to run a mike cord from the TS-940S to a remote microphone! Cables all run and connected? Now you're in business!SETTING THE TS-940S When you start up "KQI Control" it will initialize many features of the TS-940S for you. But there are some things it simply cannot do as there are no computer-control capabilities available for these few items. Make certain that, on the TS-940S, you have the send/receive control in the receive (out) position. Make certain that if you want the antenna tuner to work that it is selected and the tuner switch is NOT set to "thru" but IS set to "auto." Also set the RF and AF Gain to a comfortable level for the type of signals you expect to be hearing. (You may consider adding a "fader" control to the remote speaker). Leave the notch and AF Tune controls UNselected. Turn the squelch control off. Set your filter to narrow or wide, again depending on what you expect to hear remotely. "KQI Control" will do all else! The first important step is to turn on your Kenwood TS-940S and the IC-232C interface. Then turn on your Macintosh and run "KQI Control" under the HyperCard program. You should hear a number of beeps coming rapidly from the TS-940S as the program sets it to the expected starting values. You will see, if you are where you can see the TS-940S, such things as the RIT and XIT controls turning off (if they were on).IMPORTANT NOTE: You MUST start the Kenwood TS-940S and the IF-232C interface BEFORE you start "KQI Control." If you start "KQI Control" first it WILL NOT WORK and the Earth will be doomed.USING "KQI CONTROL" The first step in using "KQI Control" is to understand how your Kenwood TS-940S works and to familiarize yourself with the rig's own, fine and explanatory manual. Most of the "KQI Control" features are very intuitive to use and almost self-explanatory IF you know how to use the TS-940S. The best way to learn how to use "KQI Control" is, for the first few times, use a short remote cable so that you can place the Macintosh and the TS-940S right next to each other so as to observe how "KQI Control" accesses and controls the rig. There are some tradeoffs. For example, there is some loss in the speed of a very few fuctions over actually turning the knobs and switches. That is due to two things. First, command control via RS-232C at 4800 baud is not very swift. The computer must send a command and then it must wait to "see" the response command from the Kenwood. Following this, the HyperCard program must process. On the other hand, unless you have arms twenty to thirty feet long, this program will enable you to use your rig in situations you could not have before. Here's a blow-by-blow on the onscreen controls:THE VOLUME CONTROL The Kenwood TS-940S has a dream of a volume knob, smooth as silk and as responsive as a Maserati on the open road. It was a challange to simulate it onscreen and while I had to sacrifice a little bit in the way of speed, I think the onscreen control works in an analogous manner to the rig's. Just as you would turn the rig's knob clockwise to increase frequency you click on the buttons on the right-hand side of the onscreen knob's to increase frequency. To decrease frequency you would turn the real knob counter-clockwise, so just click on the onscreen knob's left-hand buttons. Note that each button is labeled with the amount of change it will accomplish in frequency. Click a button. It will highlight and you will, after about two seconds, see the frequency update on the display. While you do NOT have to wait for the update to click again, I find it is best to wait for this feedback. Once in a while, if you go into a frenzy of clicking, you will overrun the TS-940S' telecommunications buffer and the main frequency display will look "crazy." If that happens click on the "CHECK FREQUENCY" button on the right side of the screen (in the "Functions" area) and the display should repair itself.UP AND DOWN Some of Kenwood's microphones have "Up" and "Down" controls. Our TUNE UP and TUNE DOWN onscreen buttons emulate them. Just as on the microphone, holding a button down keeps increasing (or decreasing) the frequency. It was not feasible to both update the screen's frequency display in real-time and keep the "sound" of the frequency change smooth enough for by-ear tuning (due to the 4800 baud roundtrip time lag). So, I opted to have the word "UPDATING" appear in the frequency display as these buttons are clicked on and held down. But while you do not have the frequency display during the TUNE UP/TUNE DOWN button press, most people do not watch the LED dial anyway -- the idea, after all, is to listen as you tune. And, of course, as soon as you have tuned and let up on the button the frequency display will update. I found that after just a few QSO's these buttons were actually as handy to use as the "real" ones on my MC-85 microphone.RIT/XIT Both RIT and XIT are fully implemented. A click on the "RIT ON" button will quickly show that the "KQI Control" program works in the same way as the TS-940S'. The RIT frequency will be added or subtracted from the main frequency. The XIT control works in a like manner. The UP and DOWN buttons under the RIT/XIT buttons function as do the TUNE UP and TUNE DOWN buttons under the onscreen tuning knob. Click on them and hold the mouse button down as they continue to operate. The CLEAR button, as on the TS-940S, will set RIT/XIT back to 0.0.FUNCTIONS Under the RIT/XIT area, this "panel" implements all of the function switches on the TS-940S.A/B: This will switch from VFO-A to VFO-B and vice-versa. Of course, both the VFO-A and VFO-B lights are emulated with indicators above the onscreen display.A=B: Will set both VFOs to the value of the displayed VFO.VOICE: What a gimmick! I couldn't resist it, could you? If you have a VS-1 voice synthesizer in your TS-940 you can scare someone remotely! Click, and the TS-940S speaks.F-LOCK: Click on this and the front panel is locked out. Click on it again to erase the checkbox's highlite and the panel is freed. Onscreen indicators indicate the F-LOCK state.SPLIT FREQUENCY OPERATION: I have tried to follow the TS-940S' own scheme for splitting frequency. Note that there are two controls involved, SPLIT and T-F SET. When SPLIT is not chosen, the T-F SET onscreen control is not available, it is shown as a greyed-out outline of itself. Select the SPLIT control and the SPLIT indicator shows under the frequency display and the T-F SET control blacks in and becomes useable. Now click on the T-F set control. If VFO-A is your main VFO then VFO-B will come up (and vice-versa). You can now use all of the tuning controls to set your transmit frequency. Click on T-F SET again once you have set the frequency to return to your receive VFO. But keep the SPLIT control selected if you desire such operations.CHECK DISPLAY: This is your bail-out or PANIC button if the onscreen display is trashed by a noise burst in the line, RF interference, or the 4800 baud bogeyman. Click on it and your meter displays will be checked and redrawn.SELECTIVITY CONTROLSSSB SLOPE is implemented in the same manner as the TS-940S' dual control knob. Two arrow-emblazoned buttons control Low Cut, two control High Cut. Adjust the High Cut right-pointing arrow, for example, and signals higher than the operating frequency will be reduced. I have added a digital percentage readout for both high and low cuts, and for VBT.VBT: (Variable Bandwidth Tuning) Again, I have implemented this pretty much in the Kenwood manner using arrows to indicate increase and decrease. Increasing the VBT will narrow the IF passband.SLOPE/VBT METER: I have implemented a graphic meter which echoes the meter on the TS-940S. It is read in the same way. ------------------------------------------------------------------ IMPORTANT NOTE ABOUT THE GRAPHIC METERNOTE that the meter may be turned "on" and "off" via the "Graphic On" and "Graphic Off" buttons below it. The reason, again, is the 4800 baud operation and HyperCard's processing speed. I recommend that you KEEP THE METER TURNED OFF WHILE YOU TUNE SLOPE AND VBT. Gauge your tuning both by the sound of the incoming signal and the digital, percentage readouts. Then, you can turn the meter on just to get a visual that all is set as you expected. If you leave it on while you tune slope or VBT you will terribly degrade performance!------------------------------------------------------------------TUNING SHORTCUT CONTROLSThe TS-940S' Band Key switches are handy for switching immediately to the amateur radio bands. They are implemented onscreen identical to those on the rig. Pressing 14, for example, will move you to 14.XXX.XX MHz where XXX.XX are the numbers previously on the readout in those positions. DIRECT frequency entry is easy. Just click on this button and type your new frequency into the dialog box, then hit return or click on "OK." Make certain you type in the exact format of MM.KKK.HH such as 14.234.12 entering all decimal points. The Up- and Down-pointing arrows here emulate the TS-940S' 1 MHz step switches. Press Up to go up a MHz, Down to go down that amount.MODESAll modes of the TS-940S may be selected here by clicking on the desired mode. When selected, each mode will reset to either Slope or VBT control depending on the mode. (USB and LSB can access Slope but not VBT; AM, CW and FSK can access VBT but not Slope; and FM works with neither Slope nor VBT.MISC. CONTROLSThe RX/TX switch is emulated next to the tuning shortcut controls. Of course, it is also neccessary to run a CW key or mike cable from your shack to the remote-control area if you are going to transmit. The AT.T switch will tune the TS-940S' antenna tuner for you (make sure the tuner is selected on the front panel). Click on the AT.T button. You will see the RECEIVE onscreen indicator temporarily go out and the ON AIR indicator will come on. Then you will see the word "TUNING..." next to the ON AIR indicator. When it goes out and the RECEIVE indicator comes back you will know that the tuner has gone through its cycle.------------------------------------------------------------------- BEWARE: There is no way for the "KQI Control" program to know if the tuning was succesful or not. No such messages are sent from the TS-940S back to the computer! The program just knows that the tuner operated NOT if the operation was completed! So NEVER use the rig remotely on an antenna that you do not already know "matches" with the rig!!-------------------------------------------------------------------SUB-DISPLAYThe 4800 baud bottleneck made it impossible to have onscreen at all times the settings of both VFO-A and VFO-B without terrible degradation of performance. However, if you forget what the offscreen VFO is set to you can press and hold the SUB-DISPLAY button. In about four seconds the SUB-DISPLAY field will appear with both VFOs' A and B frequency readouts.THE LOGBOOKPressing the LOG button takes you to the KQI LOG sub-program. The first question the program asks you is if you want to just browse the logbook or if you want to write a new entry. Let's say you want to log a contact. The KQI LOG sub-program will first present you with various dialog boxes asking you to type in the other station's callsign, his name and QTH and the signal reports exchanged. The program will NOT ask you for date, time, frequency or mode -- it will automatically ask your TS-940S instead. When you and your TS-940S have entered the information, you may return to remote control by clicking on the KQI CONTROL button (the words "KQI Control"). Don't worry if you make a mistake. All cards in the logbook may be edited manually. If you'd like you can start up KQI LOG and answer the first dialog box with "Browse." Or, instead of clicking on the KQI CONTROL button to return to remote control, just stay in the logbook program. If you do either you will be browsing the logbook "cards." Just move the cursor to the field you want to edit and use the Mac's regular text-editing features. For information as to such things as how to search for a call or a name or other data, how to print out an entry, please see your HyperCard manual or its very good Help stack. You may also, at the beginning of a session, choose to start-up in the logbook by double-clicking the KQI LOG stack instead of KQI CONTROL. Please note that both stacks are part of the overall KQI CONTROL, copyrighted program. Thank you.OTHER RADIOSThis program has only, thus far, been tested with my own Kenwood TS-940S transceiver. However, the manual for the IF-10B indicates that many parts of this program should control features on Kenwood rigs including the TS-140S, TS-680S, TS-711A, TS-711E, TS-811A, TS-811B, TS-811E. It may also have some applicability to the R-5000 receiver. Who knows, maybe Kenwood will send me one of each for "testing?" (Well, I can dream, can't I?)COMMENTSAs you can see, you really can remotely control your TS-940S with "KQI Control!" I have personally used it on my Mac II to talk to hams on 20M on one monitor screen while, on the other monitor, I was word processing. Still, there is always a "wish list." If Kenwood is listening: How about computer control of the RF and AF gain? That is top priority in my book. And, it would be nice to have Notch/Squelch and Pitch/AF Tune too. Here's hoping that the TS-940S, already a super rig, will go through more evolutionary changes in ROM (and that such ROMs will be provided free or at very reasonable cost to all TS-940S owners) so that programs such as "KQI Control" can get ever more powerful. CQ, CQ, CQ, This is the future calling!!I hope you enjoy my program and thank you,73 from,Neil ShapiroWB2KQIBethpage, N.Y.516/735-6924</text>
</content>
<name>Help</name>
<script></script>
</card>
card_3365.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<script>on mouseUpgo to card "KQI Control"end mouseUp</script>
</part>
<content>
<layer>card</layer>
<id>1</id>
<text>KQI CONTROL will make the use of your Kenwood TS-940S transciver more interesting and even more useful. Almost all tuning features of the rig are implemented. But there is still some expansion coming.Some of the updates planned may include: Memory management so as to have up to 200 pre-programmed channels available; super scanning to allow "sets" of scanning frequencies to be saved to disk and loaded in; built-in reference screens to such things as worldwide ham prefixes, time zones and the like; and many, many, other features. In fact, if there is something you would like -- just ask and it may well get included in the next version.You may contact me at my address from any current Callbook or call me at the number below. Or, if you have a modem and are a member of the CompuServe network, drop me a line on any MAUG(tm) Forum where I am the sysop. I'd be happy to correspond with you about this program.KQI CONTROL will, I hope, always be an evolving program. Please support me in my efforts to make the Kenwood line of ham radio equipment as futuristic and exciting as possible. Originally I was going to make this program available as shareware. But ham radio has given me much in the way of enjoyment in the almost 30 years since I was first licensed. Distributing this "stack" for free is my way of trying to give a little back to the hobby. Please feel free to give this stack to your friends, to hand it out to people at club meetings, to upload it to BBS systems and computer networks.HOWEVER, if I am not going to make money on this stack I see no reason to support the more vulturous "public domain" disk houses. Please be aware that this is a copyrighted program and I reserve ALL commercial rights to its distribution. I consider commercial distribution to be more than $3.50 (what a disk should cost) for a disk containing this program. If someone sells you this program for more than $3.50 please tell me because I will definitely turn the matter over to my corporation's attorney for prosecution under the laws of copyright.I also ask that you do NOT modify this program in any way before you distribute it. I expect that many hams may contact me to ask questions and I will try to support them. But I cannot support what is not mine. I do not want to "lock" the stack. So, if you do modify this stack for your own use -- great! But please keep one "virgin" copy to use as your "pass-on" copy.I hope you enjoy using "KQI Control" and if you hear me on the bands please give me a shout! Best 73's!-- Neil Shapiro WB2KQI 516/735-6924====================================================================KQI CONTROL is by Neil Shapiro, WB2KQI, and is Copyright © 1988 by MCU Inc. All Rights Reserved. The above copyright does NOT apply to the XCMNDS in the resource fork of the program which were written by Harry Chesley and placed in the public domain. My thanks, and those of many others, to Harry for the use of his efforts without which this program would have been impossible. ====================================================================</text>
