Labels:text | screenshot | font | diagram | parallel | design OCR: BOX THEATRE INSTRUCTIONS 1. Colour and print out the theatre. 2. Cut out the front where shown. 3. Fold along the bottom and top where shown and then glue. 4. Fold the tabs down and stick them. 5. Fold the sides as shown 6. Cut the back of the theatre out then fold and stick the top and bottom the same as you did with the front. 7. Fold the sides of the back where shown and then glue them. 8. Stick the back edges to the folded sides of the front. BOX THEATRE INSTRUCTIONS 8. Cut the stage out and then fold where show. 9. Fold the side flaps down and the glue them. 10. Sick the side flaps to thefront and back panels to make a box. 11. Slot the stage into the theatre to make the final theatre. 12. Colour and print out the scenes and then fold the top over along the marked line to create a 'hook'. 13. Put one of the scenes into the theatre, hooking it over the back panel to keep it in place. CHARACTER INSTRUCTIONS 1. Colour and print out the character. 2. Take the long thin strut and fold along the line shown. 3. Glue the tab and then fold and stick as shown to make the puppet support strut. 3. Put the strut to one side and then cut out the box around the outside of the character. 4. Cut the character out. 5. Unfold the character and glue as shown. 6. Take the strut you made earlier and place it in the middle of the character. Fold the two halves of the character back together to stick.
(.png)
