Best Objectech Shareware Selections/UNTITLED.iso/boss/util/menu/017/install.bat

DOS Batch File | 1990-10-05 | 6KB | 146 lines

Echo Off
If exist sdl_get.exe goto start
Echo Unable to locate the file sdl_get.EXE.  This file is on your
Echo original MASDIR disk or a backup copy.  Please run INSTALL again
Echo from the drive and/or directory that contains the MASDIR files.
:start
sdl_get BE %A%
Echo * * *
Echo With your permission, INSTALL will copy a few of the MASDIR files
Echo to your hard disk or to another floppy.  No changes will be made
Echo to your AUTOEXEC.BAT or to your CONFIG.SYS.  You may abort this
Echo program at any time by pressing Ctrl-C or Ctrl-Break.  You may
Echo also press Esc at any prompt to cancel the rest of the program.
Echo Do not press Enter or Return after you press another key unless you
Echo have been asked to enter more than one character at a prompt.
:getdrive
sdl_get YE
Set D=%GET%
If exist %D%:sdl.com goto isthere
:whatdrive
Echo * * *
Echo The current drive is %D%:
Echo SDL.COM does not appear to be on this drive.  Please enter the
Echo one-letter designator of the drive where the MASDIR disk is.
:again
Echo SDL.COM was not found on the drive you specified.  If it is in
Echo a subdirectory on that drive we can make that subdirectory
Echo current for the drive so SDL.COM can be found.  If so,
Echo enter the drive:\directory, or just Return if you want to exit
Echo to change disks or directories. Press Return after you make your entry.
Echo * * *
sdl_get S "Please enter the drive:\directory to find SDL.COM: "
if not errorlevel 1 goto exit
Set D=%GET%
if not errorlevel 2 goto exist
cd %D%
Echo That should do it, now please enter the one-letter drive
Echo designator for that same disk.  This is necessary for proper
Echo operation of INSTALL.
:askdrive
Echo * * *
sdl_get C "Enter one letter (a,b,c,d,e,f,g,h,i): " ABCDEFGHI}~
If %GET% == ~ go to exit
If %GET% == } goto getdrive
Set D=%GET%
:exist
If not exist %D%:sdl.com goto again
:ISTHERE
Echo * * *
Echo To skip the action of any question, just press Enter or Return.
Echo * * *
Echo SDL.COM is an excellent replacement for the DOS DIR command.
Echo It is much more versatile than DIR.  The first step is to copy
Echo SDL.COM to the directory with your other DOS command files and/or
Echo your other utility programs.  Please enter the drive and
:askdest
Echo directory that you want SDL.COM to be copied to.  The directory
Echo must already exist, and it should be one that is normally on your
Echo DOS path.  For example, you might enter C:\DOS, or C:\BIN, or
Echo C:\UTIL if you use one of those directories for executable files.
:ENTER
Echo * * *
sdl_get S "Please enter the drive:\directory now: "
If not errorlevel 1 goto next1
Set P=%GET%
IF EXIST %P%\NUL GOTO COPY
Echo %P% does not appear to be a valid drive and directory.
GOTO ENTER
:COPY
Echo You have entered %P%
Echo The command will be COPY %D%:SDL.COM %P%\SDL.COM
sdl_get C "Is this correct (Y,N)? " YN}~
If %GET% == ~ goto exit
If %GET% == } goto next1
If not errorlevel 89 goto isthere
COPY %D%:SDL.COM %P%\SDL.COM
IF NOT EXIST %P%\SDL.COM GOTO NOCOPY
IF (%SDL%) == () SET SDL=S
IF (%SDL%) == () GOTO next1
Echo This is a test of running SDL in its new location.
Echo If SDL pauses with a menu, just press Esc.
pause
%P%\SDL %P%\sdl.com/M/C-
If errorlevel 1 goto next1
:NOCOPY
Echo For some reason SDL does not seem to have been copied to the
Echo destination you specified.  Please re-enter the drive and
goto askdest
:next1
Pause
Echo * * *
Echo The next step is to create a working disk or directory for you
Echo to customize SDL.COM.  If you don't want to do this now, press Esc
Echo or Return at the prompt.
ECHO * * *
ECHO This program will create a working disk or directory
ECHO for the purpose of running the SDLSETUP program.
ECHO * * *
ECHO It is necessary to enter the drive and/or directory
ECHO that you want to use for the working area.  A RAM disk
ECHO would be ideal because it speeds things up and once
ECHO you customize SDL.COM the way you want it, it is not
ECHO necessary to save the working directory.  A directory on
Echo a hard disk works very well also, and the work can easily
Echo be done on a floppy but it will be a little slower.
ECHO * * *
ECHO Enter the drive and/or directory that you want to use.  If you
Echo include a directory, be sure that the directory exists, or that
Echo it is OK to use the DOS MD (Make Directory) command to create it.
ECHO * * *
ECHO Some examples of what you might enter are:
ECHO B:       E:        C:\SDL       D:\MASDIR
sdl_get S "Please enter the drive:\directory now: "
If not errorlevel 1 goto exit
Set P=%GET%
if exist %P%\NUL goto MDOK
Echo * * *
ECHO Creating a working area for SDLSETUP as %P%.
echo If you see the message "Unable to create directory"
ECHO it means that the directory already exists, that it is a
echo ROOT directory, or that the specification was incorrect.
ECHO This does NOT indicate a problem unless you have made
ECHO a mistake in your specification.
echo * * *
ECHO The command will be: MkDir %P%
sdl_get C "Is this correct (Y,N)? " YN~}
If errorlevel 125 goto exit
if errorlevel 78 if not errorlevel 79 goto next1
md %P%
:MDOK
Echo The next command will be COPY %D%:SDL*.* %P%
sdl_get C "Is this correct (Y,n)? " YN}~
If errorlevel 125 goto exit
If not errorlevel 89 goto next1
copy %D%:sdl*.* %P%
echo Files copied to %P%
:exit
Sdl_get BE %A%
Set D=
Set P=
If exist menu.bat menu
Set A=
Set GET=
Echo Exiting to DOS now!
If exist utility.bat utility