home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Bila Vrana
/
BILA_VRANA.iso
/
019A
/
BGFAX160.ZIP
/
DOCS
/
FD212.TXT
< prev
next >
Wrap
Text File
|
1996-05-18
|
3KB
|
107 lines
--------------------------------------------------------------------------
Setup hints for Class fax 2 modems, with FD 2.12/SW and 2.20/ML 07-14-95
B.J. Guillot
FidoNet 1:106/400 InterNet: bjg90783@jetson.uh.edu
--------------------------------------------------------------------------
FD 2.20/ML users must set: [FDSETUP] Modem -> Fax -> Internal = "NO".
If you need hints for FrontDoor and Class 2.0, see "FD-USR.TXT".
If you need hints for FrontDoor and ZyXEL, see "FD-ZYXEL.TXT".
If you need hints for FrontDoor and Class 1, see "FD-HAYES.TXT".
Please make sure the following two items are true before proceeding...
(1) Your modem is NOT set to "Auto Answer" mode (REGISTER S0 MUST EQUAL 0)
(2) You have already put all relevant DATA commands for the BBS into NVRAM
Note that, generally, fax (AT+F) commands CANNOT be stored in NVRAM.
Here is the relevant information from FDSETUP ...
[FDSETUP] Modem -> Default Settings -> Command Strings
Init-1 ... ATZ|
Init-2 ... AT+FCR=1;+FDCC=1,3,0,2,0,0,0,0|
Init-3 ... AT+FAA=1;+FLID="713 555 1212"|
; atz automatically recalls data commands in NVRAM
; +fcr=1 enables fax receiption
; +flid="713 555 1212" sets FAX ID, up to 20 characters, QUOTES REQUIRED
;
; +fdcc=1,3,0,2,0,0,0,0 allow high res, 9600, 1D compression [recommended]
; +fdcc=1,5,0,2,0,0,0,0 enable high resolution, 14400, 1D compression
; +fdcc=1,5,0,2,1,0,0,0 enable high res, 14400, 1D and 2D compression
[FDSETUP] Modem -> Default Settings -> Answer control
Manual answer Yes
Force answer ... ATA|
Answer delay ... 2
; The Answer delay may need to be modified if you are using Caller ID.
[FDSETUP] Mailer -> Errorlevels
Fax ... 255
==========================================================================
If you are using a modem that returns a "FAX" response ... [METHOD #1]
(Modems such as the Supra and Zoom).
[FDSETUP] Modem -> Default Settings -> Connect Messages
Fax ... CONNECT FAX <-- THIS IS WRONG
Fax ... FAX <-- RIGHT, GOOD, OKAY
FDRUN.BAT should contain something similar to ...
@echo off
c:
cd\fd
fd
if errorlevel 255 goto fax
if errorlevel 103 maint.bat
if errorlevel 102 toss.bat
if errorlevel 101 local.bat
if errorlevel 100 dobbs.bat
goto end
:fax
rem ---1 is for com1 and z is for zfax format
bgfax /fax c:\bgfax 1 z
fdrun.bat
:end
==========================================================================
If you are using a modem that returns a "+FCON" response ... [METHOD #2]
(Modems such as the PPI, GVC, and Intel).
[FDSETUP] Modem -> Default Settings -> Connect Messages
Fax ... +FCON <-- RIGHT
Fax ... CONNECT +FCON <-- THIS IS *WRONG*
FDRUN.BAT should contain something similar to ...
@echo off
c:
cd\fd
fd
if errorlevel 255 goto fax
if errorlevel 103 maint.bat
if errorlevel 102 toss.bat
if errorlevel 101 local.bat
if errorlevel 100 dobbs.bat
goto end
:fax
rem ---1 is for com1 and z is for zfax format
bgfax /fast:4 c:\bgfax 1 z
rem ---if /fast:4 gives you trouble, try using /fcon
fdrun.bat
:end
==========================================================================
See BGFAX.DOC for a detailed description of the differences between
/FAX, /FAST, /FAST:nn and /FCON.
Regards,
B.J. Guillot