To setup the screen saver features after installation, choose the æSETUPÆ button and the Screen Saver Setup Screen will appear. The features are as follows:
TILE BACKGROUND ENABLED/DISABLED: Clicking on this will put an æXÆ in the box and the tiled background effect will be enabled. (On some slower machines you may want to disable this feature)
SOUND ON/OFF: Clicking on this will put an æXÆ in the box and the background music will be enabled. (Sound will only be heard if a sound card is properly installed)
PLAY CD ACTIVE/INACTIVE: Clicking on this will put an æXÆ in the box and the CD Audio feature will be enabled. (Sound will only be heard if a sound card is properly installed)
PLAY RANDOM CD ACTIVE/INACTIVE: Clicking on this will put an æXÆ in the box and the CD Audio will play in random order. (The CD audio will play continuosly until the screen saver is stopped)
MEMOTAKER IS/IS NOT ACTIVATED: Clicking on this will put an æcheckÆ in the box and the MemoTaker feature will be enabled. (CAUTION: Before changing this setting, read the MemoTaker directions on next page)
VOLUME: Sliding this control will set the volume of the background music.
RANDOM SEQUENCE: Clicking on this will put an æXÆ in the box and pictures will appear in no set sequence.
PICTURE SHOW DELAY: Typing a number in this box determines how long each picture is displayed. The time is in seconds and a number between 2 and 10 is recommended.
SLIDE EFFECTS SPEED: Adjusts the speed which the pictures slide onto the screen. Slower setting is for faster machines. Faster setting is for slower machines. (NOTE: Faster settings may cause pictures to æjerkÆ as they scroll on and off)
PASSWORD PROTECTION: Allows you to input a password that enables only those that know the password access to your computer while the screen saver is active.
DONE: Clicking this saves your setup and closes the setup program.
CANCEL: Clicking this closes the setup program without saving changes.
REGISTER: Clicking this will bring up the registration information screen (Only on unregistered copies). This is where you input registration information when you register.
9. TEST: Clicking this will display the screen saver to test your configuration.
USING MEMOTAKER:
1. The MemoTaker feature allows individuals to leave you messages while your screen saver is running and will still allow protection from unwanted intrusion into your system (if PASSWORD protected). It is activated by any key or mouse movement. Once the message is input, the screen will return to the screen saver. Messages can be up to 255 characters in length and will be date/time stamped when saved. The individuals must enter their name prior to leaving a message. This discourages anonymous messages.
2. The MemoTaker feature changes the way you must exit the screen saver. To exit the screen saver and read your messages (if there are no messages, you will just exit):
a. Press and hold the æALTÆ key and while still holding the æALTÆ key down, press the æF12Æ key. (Combination ALT-F12) Because of this feature you must be using a 101 or 102 enhanced keyboard.
b. If there are messages waiting for you, they will be displayed ( if you have set a password, you will need to enter it before the memo screen will appear.). You can then highlight a message (By clicking on it) and click on the æDisplay Full MessageÆ button to view the message in its entirety or press the öPrint Message button to print the messages.
NOTE: The messages will be DELETED when you press æExitÆ so make sure you have either read them all or printed them.
SCREENSAVER PROGRAM (c)COPYRIGHT 1996- 1997 PJ SoftWare, GOOSE CREEK, SC
