home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fresh Fish 10
/
Fresh_Fish_10_2352.bin
/
useful
/
util
/
misc
/
brik
/
initcrc.c
< prev
next >
Wrap
C/C++ Source or Header
|
1993-08-30
|
8KB
|
196 lines
/* ::[[ @(#) initcrc.c 1.1 89/07/08 10:49:00 ]]:: */
/* Some of the following CRC-32 stuff is from zmodem source code */
#ifndef LINT
static char sccsid[]="::[[ @(#) initcrc.c 1.1 89/07/08 10:49:00 ]]::";
#endif
/*
I claim no copyright over the contents of this file. However,
you are requested to preserve all author attributions.
-- Rahul Dhesi
Checksum: 2467278882 (check or update this with "brik")
*/
#include "brik.h"
#define TABSIZE 256 /* no of entries in table */
typedef unsigned long tcrc; /* type of crc value -- same as in brik.c */
tcrc crccode; /* holds all crc values */
/*
* Copyright (C) 1986 Gary S. Brown. You may use this program, or
* code or tables extracted from it, as desired without restriction.
*/
/* First, the polynomial itself and its table of feedback terms. The */
/* polynomial is */
/* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */
/* Note that we take it "backwards" and put the highest-order term in */
/* the lowest-order bit. The X^32 term is "implied"; the LSB is the */
/* X^31 term, etc. The X^0 term (usually shown as "+1") results in */
/* the MSB being 1. */
/* Note that the usual hardware shift register implementation, which */
/* is what we're using (we're merely optimizing it by doing eight-bit */
/* chunks at a time) shifts bits into the lowest-order term. In our */
/* implementation, that means shifting towards the right. Why do we */
/* do it this way? Because the calculated CRC must be transmitted in */
/* order from highest-order term to lowest-order term. UARTs transmit */
/* characters in order from LSB to MSB. By storing the CRC this way, */
/* we hand it to the UART in the order low-byte to high-byte; the UART */
/* sends each low-bit to hight-bit; and the result is transmission bit */
/* by bit from highest- to lowest-order term without requiring any bit */
/* shuffling on our part. Reception works similarly. */
/* The feedback terms table consists of 256, 32-bit entries. Notes: */
/* */
/* The table can be generated at runtime if desired; code to do so */
/* is shown later. It might not be obvious, but the feedback */
/* terms simply represent the results of eight shift/xor opera- */
/* tions for all combinations of data and CRC register values. */
/* */
/* The values must be right-shifted by eight bits by the "updcrc" */
/* logic; the shift must be unsigned (bring in zeroes). On some */
/* hardware you could probably optimize the shift in assembler by */
/* using byte-swap instructions. */
/* if GENTAB is not defined, a static CRC table is used */
#ifndef GENTAB
tcrc crctab[] = { /* CRC polynomial 0xedb88320 */
0x00000000, 0x77073096, 0xee0e612c, 0x990951ba,
0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,
0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940,
0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116,
0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a,
0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818,
0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c,
0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086,
0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4,
0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe,
0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252,
0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60,
0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04,
0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a,
0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e,
0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0,
0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6,
0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
};
#else
tcrc crctab[TABSIZE]; /* to be filled in below */
#endif /* GENTAB */
/* If GENTAB is defined, we generate the CRC table at runtime */
#ifdef GENTAB
/*
The function mkcrctab() generates a CRC-32 table at runtime. The table
generated is identical to that shown above.
Based on explanation and code in "C Programmer's Guide to Serial
Communications" by Joe Campbell.
Rahul Dhesi, 28 March 1989.
*/
#define CRC_32 0xedb88320L /* CRC-32 polynomial */
/* calculates CRC of one item */
tcrc onecrc (item)
int item;
{
int i;
tcrc accum = 0;
item <<= 1;
for (i = 8; i > 0; i--) {
item >>= 1;
if ((item ^ accum) & 0x0001)
accum = (accum >> 1) ^ CRC_32;
else
accum >>= 1;
}
return (accum);
}
#ifdef ANSIPROTO
tcrc onecrc (int);
#endif
/* generates CRC table, calling onecrc() to make each term */
void mkcrctab()
{
int i;
for (i = 0; i < TABSIZE; i++)
crctab[i] = onecrc (i);
}
#ifdef TESTTAB
/* test code -- prints entire table to standard output */
#include <stdio.h>
main()
{
int i;
mkcrctab(); /* make CRC table */
/* now print it */
for (i = 0; i < TABSIZE; i ++) {
if ((i % 4) == 0 && i > 0)
printf ("\n");
printf ("0x%08lx ", (unsigned long) crctab[i]);
}
printf ("\n");
}
#endif /* TESTTAB */
#endif /* GENTAB */