Fresh Fish 4/FreshFish_May-June1994.bin/bbs/gnu/gcc-2.5.8-bin.lha/info/gcc.info-8

GNU Info File | 1994-02-21 | 49.4 KB | 1,178 lines

This is Info file gcc.info, produced by Makeinfo-1.55 from the input
file gcc.texi.

   This file documents the use and the internals of the GNU compiler.

   Published by the Free Software Foundation 675 Massachusetts Avenue
Cambridge, MA 02139 USA

   Copyright (C) 1988, 1989, 1992, 1993 Free Software Foundation, Inc.

   Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

   Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided also
that the sections entitled "GNU General Public License" and "Protect
Your Freedom--Fight `Look And Feel'" are included exactly as in the
original, and provided that the entire resulting derived work is
distributed under the terms of a permission notice identical to this
one.

   Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that the sections entitled "GNU General Public
License" and "Protect Your Freedom--Fight `Look And Feel'", and this
permission notice, may be included in translations approved by the Free
Software Foundation instead of in the original English.


File: gcc.info,  Node: Local Reg Vars,  Prev: Global Reg Vars,  Up: Explicit Reg Vars

Specifying Registers for Local Variables
----------------------------------------

   You can define a local register variable with a specified register
like this:

     register int *foo asm ("a5");

Here `a5' is the name of the register which should be used.  Note that
this is the same syntax used for defining global register variables,
but for a local variable it would appear within a function.

   Naturally the register name is cpu-dependent, but this is not a
problem, since specific registers are most often useful with explicit
assembler instructions (*note Extended Asm::.).  Both of these things
generally require that you conditionalize your program according to cpu
type.

   In addition, operating systems on one type of cpu may differ in how
they name the registers; then you would need additional conditionals.
For example, some 68000 operating systems call this register `%a5'.

   Eventually there may be a way of asking the compiler to choose a
register automatically, but first we need to figure out how it should
choose and how to enable you to guide the choice.  No solution is
evident.

   Defining such a register variable does not reserve the register; it
remains available for other uses in places where flow control determines
the variable's value is not live.  However, these registers are made
unavailable for use in the reload pass.  I would not be surprised if
excessive use of this feature leaves the compiler too few available
registers to compile certain functions.


File: gcc.info,  Node: Alternate Keywords,  Next: Incomplete Enums,  Prev: Explicit Reg Vars,  Up: C Extensions

Alternate Keywords
==================

   The option `-traditional' disables certain keywords; `-ansi'
disables certain others.  This causes trouble when you want to use GNU C
extensions, or ANSI C features, in a general-purpose header file that
should be usable by all programs, including ANSI C programs and
traditional ones.  The keywords `asm', `typeof' and `inline' cannot be
used since they won't work in a program compiled with `-ansi', while
the keywords `const', `volatile', `signed', `typeof' and `inline' won't
work in a program compiled with `-traditional'.

   The way to solve these problems is to put `__' at the beginning and
end of each problematical keyword.  For example, use `__asm__' instead
of `asm', `__const__' instead of `const', and `__inline__' instead of
`inline'.

   Other C compilers won't accept these alternative keywords; if you
want to compile with another compiler, you can define the alternate
keywords as macros to replace them with the customary keywords.  It
looks like this:

     #ifndef __GNUC__
     #define __asm__ asm
     #endif

   `-pedantic' causes warnings for many GNU C extensions.  You can
prevent such warnings within one expression by writing `__extension__'
before the expression.  `__extension__' has no effect aside from this.


File: gcc.info,  Node: Incomplete Enums,  Next: Function Names,  Prev: Alternate Keywords,  Up: C Extensions

Incomplete `enum' Types
=======================

   You can define an `enum' tag without specifying its possible values.
This results in an incomplete type, much like what you get if you write
`struct foo' without describing the elements.  A later declaration
which does specify the possible values completes the type.

   You can't allocate variables or storage using the type while it is
incomplete.  However, you can work with pointers to that type.

   This extension may not be very useful, but it makes the handling of
`enum' more consistent with the way `struct' and `union' are handled.


File: gcc.info,  Node: Function Names,  Prev: Incomplete Enums,  Up: C Extensions

Function Names as Strings
=========================

   GNU CC predefines two string variables to be the name of the current
function.  The variable `__FUNCTION__' is the name of the function as
it appears in the source.  The variable `__PRETTY_FUNCTION__' is the
name of the function pretty printed in a language specific fashion.

   These names are always the same in a C function, but in a C++
function they may be different.  For example, this program:

     extern "C" {
     extern int printf (char *, ...);
     }

     class a {
      public:
       sub (int i)
         {
           printf ("__FUNCTION__ = %s\n", __FUNCTION__);
           printf ("__PRETTY_FUNCTION__ = %s\n", __PRETTY_FUNCTION__);
         }
     };

     int
     main (void)
     {
       a ax;
       ax.sub (0);
       return 0;
     }

gives this output:

     __FUNCTION__ = sub
     __PRETTY_FUNCTION__ = int  a::sub (int)


File: gcc.info,  Node: C++ Extensions,  Next: Trouble,  Prev: C Extensions,  Up: Top

Extensions to the C++ Language
******************************

   The GNU compiler provides these extensions to the C++ language (and
you can also use most of the C language extensions in your C++
programs).  If you want to write code that checks whether these
features are available, you can test for the GNU compiler the same way
as for C programs: check for a predefined macro `__GNUC__'.  You can
also use `__GNUG__' to test specifically for GNU C++ (*note Standard
Predefined Macros: (cpp.info)Standard Predefined.).

* Menu:

* Naming Results::      Giving a name to C++ function return values.
* Min and Max::        C++ Minimum and maximum operators.
* Destructors and Goto:: Goto is safe to use in C++ even when destructors
                           are needed.
* C++ Interface::       You can use a single C++ header file for both
                         declarations and definitions.


File: gcc.info,  Node: Naming Results,  Next: Min and Max,  Up: C++ Extensions

Named Return Values in C++
==========================

   GNU C++ extends the function-definition syntax to allow you to
specify a name for the result of a function outside the body of the
definition, in C++ programs:

     TYPE
     FUNCTIONNAME (ARGS) return RESULTNAME;
     {
       ...
       BODY
       ...
     }

   You can use this feature to avoid an extra constructor call when a
function result has a class type.  For example, consider a function
`m', declared as `X v = m ();', whose result is of class `X':

     X
     m ()
     {
       X b;
       b.a = 23;
       return b;
     }

   Although `m' appears to have no arguments, in fact it has one
implicit argument: the address of the return value.  At invocation, the
address of enough space to hold `v' is sent in as the implicit argument.
Then `b' is constructed and its `a' field is set to the value 23.
Finally, a copy constructor (a constructor of the form `X(X&)') is
applied to `b', with the (implicit) return value location as the
target, so that `v' is now bound to the return value.

   But this is wasteful.  The local `b' is declared just to hold
something that will be copied right out.  While a compiler that
combined an "elision" algorithm with interprocedural data flow analysis
could conceivably eliminate all of this, it is much more practical to
allow you to assist the compiler in generating efficient code by
manipulating the return value explicitly, thus avoiding the local
variable and copy constructor altogether.

   Using the extended GNU C++ function-definition syntax, you can avoid
the temporary allocation and copying by naming `r' as your return value
as the outset, and assigning to its `a' field directly:

     X
     m () return r;
     {
       r.a = 23;
     }

The declaration of `r' is a standard, proper declaration, whose effects
are executed *before* any of the body of `m'.

   Functions of this type impose no additional restrictions; in
particular, you can execute `return' statements, or return implicitly by
reaching the end of the function body ("falling off the edge").  Cases
like

     X
     m () return r (23);
     {
       return;
     }

(or even `X m () return r (23); { }') are unambiguous, since the return
value `r' has been initialized in either case.  The following code may
be hard to read, but also works predictably:

     X
     m () return r;
     {
       X b;
       return b;
     }

   The return value slot denoted by `r' is initialized at the outset,
but the statement `return b;' overrides this value.  The compiler deals
with this by destroying `r' (calling the destructor if there is one, or
doing nothing if there is not), and then reinitializing `r' with `b'.

   This extension is provided primarily to help people who use
overloaded operators, where there is a great need to control not just
the arguments, but the return values of functions.  For classes where
the copy constructor incurs a heavy performance penalty (especially in
the common case where there is a quick default constructor), this is a
major savings.  The disadvantage of this extension is that you do not
control when the default constructor for the return value is called: it
is always called at the beginning.


File: gcc.info,  Node: Min and Max,  Next: Destructors and Goto,  Prev: Naming Results,  Up: C++ Extensions

Minimum and Maximum Operators in C++
====================================

   It is very convenient to have operators which return the "minimum"
or the "maximum" of two arguments.  In GNU C++ (but not in GNU C),

`A <? B'
     is the "minimum", returning the smaller of the numeric values A
     and B;

`A >? B'
     is the "maximum", returning the larger of the numeric values A and
     B.

   These operations are not primitive in ordinary C++, since you can
use a macro to return the minimum of two things in C++, as in the
following example.

     #define MIN(X,Y) ((X) < (Y) ? : (X) : (Y))

You might then use `int min = MIN (i, j);' to set MIN to the minimum
value of variables I and J.

   However, side effects in `X' or `Y' may cause unintended behavior.
For example, `MIN (i++, j++)' will fail, incrementing the smaller
counter twice.  A GNU C extension allows you to write safe macros that
avoid this kind of problem (*note Naming an Expression's Type: Naming
Types.).  However, writing `MIN' and `MAX' as macros also forces you to
use function-call notation notation for a fundamental arithmetic
operation.  Using GNU C++ extensions, you can write `int min = i <? j;'
instead.

   Since `<?' and `>?' are built into the compiler, they properly
handle expressions with side-effects;  `int min = i++ <? j++;' works
correctly.


File: gcc.info,  Node: Destructors and Goto,  Next: C++ Interface,  Prev: Min and Max,  Up: C++ Extensions

`goto' and Destructors in GNU C++
=================================

   In C++ programs, you can safely use the `goto' statement.  When you
use it to exit a block which contains aggregates requiring destructors,
the destructors will run before the `goto' transfers control.  (In ANSI
C++, `goto' is restricted to targets within the current block.)

   The compiler still forbids using `goto' to *enter* a scope that
requires constructors.


File: gcc.info,  Node: C++ Interface,  Prev: Destructors and Goto,  Up: C++ Extensions

Declarations and Definitions in One Header
==========================================

   C++ object definitions can be quite complex.  In principle, your
source code will need two kinds of things for each object that you use
across more than one source file.  First, you need an "interface"
specification, describing its structure with type declarations and
function prototypes.  Second, you need the "implementation" itself.  It
can be tedious to maintain a separate interface description in a header
file, in parallel to the actual implementation.  It is also dangerous,
since separate interface and implementation definitions may not remain
parallel.

   With GNU C++, you can use a single header file for both purposes.

     *Warning:* The mechanism to specify this is in transition.  For the
     nonce, you must use one of two `#pragma' commands; in a future
     release of GNU C++, an alternative mechanism will make these
     `#pragma' commands unnecessary.

   The header file contains the full definitions, but is marked with
`#pragma interface' in the source code.  This allows the compiler to
use the header file only as an interface specification when ordinary
source files incorporate it with `#include'.  In the single source file
where the full implementation belongs, you can use either a naming
convention or `#pragma implementation' to indicate this alternate use
of the header file.

`#pragma interface'
     Use this directive in *header files* that define object classes,
     to save space in most of the object files that use those classes.
     Normally, local copies of certain information (backup copies of
     inline member functions, debugging information, and the internal
     tables that implement virtual functions) must be kept in each
     object file that includes class definitions.  You can use this
     pragma to avoid such duplication.  When a header file containing
     `#pragma interface' is included in a compilation, this auxiliary
     information will not be generated (unless the main input source
     file itself uses `#pragma implementation').  Instead, the object
     files will contain references to be resolved at link time.

`#pragma implementation'
`#pragma implementation "OBJECTS.h"'
     Use this pragma in a *main input file*, when you want full output
     from included header files to be generated (and made globally
     visible).  The included header file, in turn, should use `#pragma
     interface'.  Backup copies of inline member functions, debugging
     information, and the internal tables used to implement virtual
     functions are all generated in implementation files.

     `#pragma implementation' is *implied* whenever the basename(1) of
     your source file matches the basename of a header file it
     includes.  There is no way to turn this off (other than using a
     different name for one of the two files).  In the same vein, if
     you use `#pragma implementation' with no argument, it applies to an
     include file with the same basename as your source file.  For
     example, in `allclass.cc', `#pragma implementation' by itself is
     equivalent to `#pragma implementation "allclass.h"'; but even if
     you do not say `#pragma implementation' at all, `allclass.h' is
     treated as an implementation file whenever you include it from
     `allclass.cc'.

     If you use an explicit `#pragma implementation', it must appear in
     your source file *before* you include the affected header files.

     Use the string argument if you want a single implementation file to
     include code from multiple header files.  (You must also use
     `#include' to include the header file; `#pragma implementation'
     only specifies how to use the file--it doesn't actually include
     it.)

     There is no way to split up the contents of a single header file
     into multiple implementation files.

   `#pragma implementation' and `#pragma interface' also have an effect
on function inlining.

   If you define a class in a header file marked with `#pragma
interface', the effect on a function defined in that class is similar to
an explicit `extern' declaration--the compiler emits no code at all to
define an independent version of the function.  Its definition is used
only for inlining with its callers.

   Conversely, when you include the same header file in a main source
file that declares it as `#pragma implementation', the compiler emits
code for the function itself; this defines a version of the function
that can be found via pointers (or by callers compiled without
inlining).

   ---------- Footnotes ----------

   (1)  A file's "basename" is the name stripped of all leading path
information and of trailing suffixes, such as `.h' or `.C' or `.cc'.


File: gcc.info,  Node: Trouble,  Next: Bugs,  Prev: C++ Extensions,  Up: Top

Known Causes of Trouble with GNU CC
***********************************

   This section describes known problems that affect users of GNU CC.
Most of these are not GNU CC bugs per se--if they were, we would fix
them.  But the result for a user may be like the result of a bug.

   Some of these problems are due to bugs in other software, some are
missing features that are too much work to add, and some are places
where people's opinions differ as to what is best.

* Menu:

* Actual Bugs::              Bugs we will fix later.
* Installation Problems::     Problems that manifest when you install GNU CC.
* Cross-Compiler Problems::   Common problems of cross compiling with GNU CC.
* Interoperation::      Problems using GNU CC with other compilers,
               and with certain linkers, assemblers and debuggers.
* External Bugs::    Problems compiling certain programs.
* Incompatibilities::   GNU CC is incompatible with traditional C.
* Fixed Headers::       GNU C uses corrected versions of system header files.
                           This is necessary, but doesn't always work smoothly.
* Disappointments::     Regrettable things we can't change, but not quite bugs.
* C++ Misunderstandings::     Common misunderstandings with GNU C++.
* Protoize Caveats::    Things to watch out for when using `protoize'.
* Non-bugs::        Things we think are right, but some others disagree.
* Warnings and Errors:: Which problems in your code get warnings,
                         and which get errors.


File: gcc.info,  Node: Actual Bugs,  Next: Installation Problems,  Up: Trouble

Actual Bugs We Haven't Fixed Yet
================================

   * The `fixincludes' script interacts badly with automounters; if the
     directory of system header files is automounted, it tends to be
     unmounted while `fixincludes' is running.  This would seem to be a
     bug in the automounter.  We don't know any good way to work around
     it.

   * The `fixproto' script will sometimes add prototypes for the
     `sigsetjmp' and `siglongjmp' functions that reference the
     `jmp_buf' type before that type is defined.  To work around this,
     edit the offending file and place the typedef in front of the
     prototypes.

   * Loop unrolling doesn't work properly for certain C++ programs.
     This is because of difficulty in updating the debugging
     information within the loop being unrolled.  We plan to revamp the
     representation of debugging information so that this will work
     properly, but we have not done this in version 2.5 because we
     don't want to delay it any further.


File: gcc.info,  Node: Installation Problems,  Next: Cross-Compiler Problems,  Prev: Actual Bugs,  Up: Trouble

Installation Problems
=====================

   This is a list of problems (and some apparent problems which don't
really mean anything is wrong) that show up during installation of GNU
CC.

   * On certain systems, defining certain environment variables such as
     `CC' can interfere with the functioning of `make'.

   * If you encounter seemingly strange errors when trying to build the
     compiler in a directory other than the source directory, it could
     be because you have previously configured the compiler in the
     source directory.  Make sure you have done all the necessary
     preparations.  *Note Other Dir::.

   * If you build GNU CC on a BSD system using a directory stored in a
     System V file system, problems may occur in running `fixincludes'
     if the System V file system doesn't support symbolic links.  These
     problems result in a failure to fix the declaration of `size_t' in
     `sys/types.h'.  If you find that `size_t' is a signed type and
     that type mismatches occur, this could be the cause.

     The solution is not to use such a directory for building GNU CC.

   * In previous versions of GNU CC, the `gcc' driver program looked for
     `as' and `ld' in various places; for example, in files beginning
     with `/gnu/lib/gcc-'.  GNU CC version 2 looks for them in the
     directory `/gnu/lib/gcc-lib/TARGET/VERSION'.

     Thus, to use a version of `as' or `ld' that is not the system
     default, for example `gas' or GNU `ld', you must put them in that
     directory (or make links to them from that directory).

   * Some commands executed when making the compiler may fail (return a
     non-zero status) and be ignored by `make'.  These failures, which
     are often due to files that were not found, are expected, and can
     safely be ignored.

   * It is normal to have warnings in compiling certain files about
     unreachable code and about enumeration type clashes.  These files'
     names begin with `insn-'.  Also, `real.c' may get some warnings
     that you can ignore.

   * Sometimes `make' recompiles parts of the compiler when installing
     the compiler.  In one case, this was traced down to a bug in
     `make'.  Either ignore the problem or switch to GNU Make.

   * If you have installed a program known as purify, you may find that
     it causes errors while linking `enquire', which is part of building
     GNU CC.  The fix is to get rid of the file `real-ld' which purify
     installs--so that GNU CC won't try to use it.

   * On Linux SLS 1.01, there is a problem with `libc.a': it does not
     contain the obstack functions.  However, GNU CC assumes that the
     obstack functions are in `libc.a' when it is the GNU C library.
     To work around this problem, change the `__GNU_LIBRARY__'
     conditional around line 31 to `#if 1'.

   * On some 386 systems, building the compiler never finishes because
     `enquire' hangs due to a hardware problem in the motherboard--it
     reports floating point exceptions to the kernel incorrectly.  You
     can install GNU CC except for `float.h' by patching out the
     command to run `enquire'.  You may also be able to fix the problem
     for real by getting a replacement motherboard.  This problem was
     observed in Revision E of the Micronics motherboard, and is fixed
     in Revision F.  It has also been observed in the MYLEX MXA-33
     motherboard.

     If you encounter this problem, you may also want to consider
     removing the FPU from the socket during the compilation.
     Alternatively, if you are running SCO Unix, you can reboot and
     force the FPU to be ignored.  To do this, type `hd(40)unix auto
     ignorefpu'.

   * On some 386 systems, GNU CC crashes trying to compile `enquire.c'.
     This happens on machines that don't have a 387 FPU chip.  On 386
     machines, the system kernel is supposed to emulate the 387 when you
     don't have one.  The crash is due to a bug in the emulator.

     One of these systems is the Unix from Interactive Systems: 386/ix.
     On this system, an alternate emulator is provided, and it does
     work.  To use it, execute this command as super-user:

          ln /etc/emulator.rel1 /etc/emulator

     and then reboot the system.  (The default emulator file remains
     present under the name `emulator.dflt'.)

     Try using `/etc/emulator.att', if you have such a problem on the
     SCO system.

     Another system which has this problem is Esix.  We don't know
     whether it has an alternate emulator that works.

     On NetBSD 0.8, a similar problem manifests itself as these error
     messages:

          enquire.c: In function `fprop':
          enquire.c:2328: floating overflow

   * On SCO systems, when compiling GNU CC with the system's compiler,
     do not use `-O'.  Some versions of the system's compiler miscompile
     GNU CC with `-O'.

   * Sometimes on a Sun 4 you may observe a crash in the program
     `genflags' or `genoutput' while building GNU CC.  This is said to
     be due to a bug in `sh'.  You can probably get around it by running
     `genflags' or `genoutput' manually and then retrying the `make'.

   * On Solaris 2, executables of GNU CC version 2.0.2 are commonly
     available, but they have a bug that shows up when compiling current
     versions of GNU CC: undefined symbol errors occur during assembly
     if you use `-g'.

     The solution is to compile the current version of GNU CC without
     `-g'.  That makes a working compiler which you can use to recompile
     with `-g'.

   * Solaris 2 comes with a number of optional OS packages.  Some of
     these packages are needed to use GNU CC fully.  If you did not
     install all optional packages when installing Solaris, you will
     need to verify that the packages that GNU CC needs are installed.

     To check whether an optional package is installed, use the
     `pkginfo' command.  To add an optional package, use the `pkgadd'
     command.  For further details, see the Solaris documentation.

     For Solaris 2.0 and 2.1, GNU CC needs six packages: `SUNWarc',
     `SUNWbtool', `SUNWesu', `SUNWhea', `SUNWlibm', and `SUNWtoo'.

     For Solaris 2.2, GNU CC needs an additional seventh package:
     `SUNWsprot'.

   * On Solaris 2, trying to use the linker and other tools in
     `/usr/ucb' to install GNU CC has been observed to cause trouble.
     For example, the linker may hang indefinitely.  The fix is to
     remove `/usr/ucb' from your `PATH'.

   * If you use the 1.31 version of the MIPS assembler (such as was
     shipped with Ultrix 3.1), you will need to use the
     -fno-delayed-branch switch when optimizing floating point code.
     Otherwise, the assembler will complain when the GCC compiler fills
     a branch delay slot with a floating point instruction, such as
     `add.d'.

   * If on a MIPS system you get an error message saying "does not have
     gp sections for all it's [sic] sectons [sic]", don't worry about
     it.  This happens whenever you use GAS with the MIPS linker, but
     there is not really anything wrong, and it is okay to use the
     output file.  You can stop such warnings by installing the GNU
     linker.

     It would be nice to extend GAS to produce the gp tables, but they
     are optional, and there should not be a warning about their
     absence.

   * In Ultrix 4.0 on the MIPS machine, `stdio.h' does not work with GNU
     CC at all unless it has been fixed with `fixincludes'.  This causes
     problems in building GNU CC.  Once GNU CC is installed, the
     problems go away.

     To work around this problem, when making the stage 1 compiler,
     specify this option to Make:

          GCC_FOR_TARGET="./xgcc -B./ -I./include"

     When making stage 2 and stage 3, specify this option:

          CFLAGS="-g -I./include"

   * Users have reported some problems with version 2.0 of the MIPS
     compiler tools that were shipped with Ultrix 4.1.  Version 2.10
     which came with Ultrix 4.2 seems to work fine.

   * Some versions of the MIPS linker will issue an assertion failure
     when linking code that uses `alloca' against shared libraries on
     RISC-OS 5.0, and DEC's OSF/1 systems.  This is a bug in the
     linker, that is supposed to be fixed in future revisions.  To
     protect against this, GNU CC passes `-non_shared' to the linker
     unless you pass an explicit `-shared' or `-call_shared' switch.

   * On System V release 3, you may get this error message while
     linking:

          ld fatal: failed to write symbol name SOMETHING
           in strings table for file WHATEVER

     This probably indicates that the disk is full or your ULIMIT won't
     allow the file to be as large as it needs to be.

     This problem can also result because the kernel parameter `MAXUMEM'
     is too small.  If so, you must regenerate the kernel and make the
     value much larger.  The default value is reported to be 1024; a
     value of 32768 is said to work.  Smaller values may also work.

   * On System V, if you get an error like this,

          /gnu/lib/bison.simple: In function `yyparse':
          /gnu/lib/bison.simple:625: virtual memory exhausted

     that too indicates a problem with disk space, ULIMIT, or `MAXUMEM'.

   * Current GNU CC versions probably do not work on version 2 of the
     NeXT operating system.

   * On NeXTStep 3.0, the Objective C compiler does not work, due,
     apparently, to a kernel bug that it happens to trigger.  This
     problem does not happen on 3.1.

   * On the Tower models 4N0 and 6N0, by default a process is not
     allowed to have more than one megabyte of memory.  GNU CC cannot
     compile itself (or many other programs) with `-O' in that much
     memory.

     To solve this problem, reconfigure the kernel adding the following
     line to the configuration file:

          MAXUMEM = 4096

   * On HP 9000 series 300 or 400 running HP-UX release 8.0, there is a
     bug in the assembler that must be fixed before GNU CC can be
     built.  This bug manifests itself during the first stage of
     compilation, while building `libgcc2.a':

          _floatdisf
          cc1: warning: `-g' option not supported on this version of GCC
          cc1: warning: `-g1' option not supported on this version of GCC
          ./xgcc: Internal compiler error: program as got fatal signal 11

     A patched version of the assembler is available by anonymous ftp
     from `altdorf.ai.mit.edu' as the file
     `archive/cph/hpux-8.0-assembler'.  If you have HP software support,
     the patch can also be obtained directly from HP, as described in
     the following note:

          This is the patched assembler, to patch SR#1653-010439, where
          the assembler aborts on floating point constants.

          The bug is not really in the assembler, but in the shared
          library version of the function "cvtnum(3c)".  The bug on
          "cvtnum(3c)" is SR#4701-078451.  Anyway, the attached
          assembler uses the archive library version of "cvtnum(3c)"
          and thus does not exhibit the bug.

     This patch is also known as PHCO_0800.

   * On HP-UX version 8.05, but not on 8.07 or more recent versions,
     the `fixproto' shell script triggers a bug in the system shell.
     If you encounter this problem, upgrade your operating system or
     use BASH (the GNU shell) to run `fixproto'.

   * Some versions of the Pyramid C compiler are reported to be unable
     to compile GNU CC.  You must use an older version of GNU CC for
     bootstrapping.  One indication of this problem is if you get a
     crash when GNU CC compiles the function `muldi3' in file
     `libgcc2.c'.

     You may be able to succeed by getting GNU CC version 1, installing
     it, and using it to compile GNU CC version 2.  The bug in the
     Pyramid C compiler does not seem to affect GNU CC version 1.

   * There may be similar problems on System V Release 3.1 on 386
     systems.

   * On the Intel Paragon (an i860 machine), if you are using operating
     system version 1.0, you will get warnings or errors about
     redefinition of `va_arg' when you build GNU CC.

     If this happens, then you need to link most programs with the
     library `iclib.a'.  You must also modify `stdio.h' as follows:
     before the lines

          #if     defined(__i860__) && !defined(_VA_LIST)
          #include <va_list.h>

     insert the line

          #if __PGC__

     and after the lines

          extern int  vprintf(const char *, va_list );
          extern int  vsprintf(char *, const char *, va_list );
          #endif

     insert the line

          #endif /* __PGC__ */

     These problems don't exist in operating system version 1.1.

   * On the Altos 3068, programs compiled with GNU CC won't work unless
     you fix a kernel bug.  This happens using system versions V.2.2
     1.0gT1 and V.2.2 1.0e and perhaps later versions as well.  See the
     file `README.ALTOS'.

   * You will get several sorts of compilation and linking errors on the
     we32k if you don't follow the special instructions.  *Note WE32K
     Install::.


File: gcc.info,  Node: Cross-Compiler Problems,  Next: Interoperation,  Prev: Installation Problems,  Up: Trouble

Cross-Compiler Problems
=======================

   You may run into problems with cross compilation on certain machines,
for several reasons.

   * Cross compilation can run into trouble for certain machines because
     some target machines' assemblers require floating point numbers to
     be written as *integer* constants in certain contexts.

     The compiler writes these integer constants by examining the
     floating point value as an integer and printing that integer,
     because this is simple to write and independent of the details of
     the floating point representation.  But this does not work if the
     compiler is running on a different machine with an incompatible
     floating point format, or even a different byte-ordering.

     In addition, correct constant folding of floating point values
     requires representing them in the target machine's format.  (The C
     standard does not quite require this, but in practice it is the
     only way to win.)

     It is now possible to overcome these problems by defining macros
     such as `REAL_VALUE_TYPE'.  But doing so is a substantial amount of
     work for each target machine.  *Note Cross-compilation::.

   * At present, the program `mips-tfile' which adds debug support to
     object files on MIPS systems does not work in a cross compile
     environment.


File: gcc.info,  Node: Interoperation,  Next: External Bugs,  Prev: Cross-Compiler Problems,  Up: Trouble

Interoperation
==============

   This section lists various difficulties encountered in using GNU C or
GNU C++ together with other compilers or with the assemblers, linkers,
libraries and debuggers on certain systems.

   * Objective C does not work on the RS/6000 or the Alpha.

   * C++ does not work on the Alpha.

   * GNU C++ does not do name mangling in the same way as other C++
     compilers.  This means that object files compiled with one compiler
     cannot be used with another.

     This effect is intentional, to protect you from more subtle
     problems.  Compilers differ as to many internal details of C++
     implementation, including: how class instances are laid out, how
     multiple inheritance is implemented, and how virtual function
     calls are handled.  If the name encoding were made the same, your
     programs would link against libraries provided from other
     compilers--but the programs would then crash when run.
     Incompatible libraries are then detected at link time, rather than
     at run time.

   * Older GDB versions sometimes fail to read the output of GNU CC
     version 2.  If you have trouble, get GDB version 4.4 or later.

   * DBX rejects some files produced by GNU CC, though it accepts
     similar constructs in output from PCC.  Until someone can supply a
     coherent description of what is valid DBX input and what is not,
     there is nothing I can do about these problems.  You are on your
     own.

   * The GNU assembler (GAS) does not support PIC.  To generate PIC
     code, you must use some other assembler, such as `/bin/as'.

   * On some BSD systems, including some versions of Ultrix, use of
     profiling causes static variable destructors (currently used only
     in C++) not to be run.

   * Use of `-I/usr/include' may cause trouble.

     Many systems come with header files that won't work with GNU CC
     unless corrected by `fixincludes'.  The corrected header files go
     in a new directory; GNU CC searches this directory before
     `/usr/include'.  If you use `-I/usr/include', this tells GNU CC to
     search `/usr/include' earlier on, before the corrected headers.
     The result is that you get the uncorrected header files.

     Instead, you should use these options (when compiling C programs):

          -I/gnu/lib/gcc-lib/TARGET/VERSION/include -I/usr/include

     For C++ programs, GNU CC also uses a special directory that
     defines C++ interfaces to standard C subroutines.  This directory
     is meant to be searched *before* other standard include
     directories, so that it takes precedence.  If you are compiling
     C++ programs and specifying include directories explicitly, use
     this option first, then the two options above:

          -I/gnu/lib/g++-include

   * On some SGI systems, when you use `-lgl_s' as an option, it gets
     translated magically to `-lgl_s -lX11_s -lc_s'.  Naturally, this
     does not happen when you use GNU CC.  You must specify all three
     options explicitly.

   * On a Sparc, GNU CC aligns all values of type `double' on an 8-byte
     boundary, and it expects every `double' to be so aligned.  The Sun
     compiler usually gives `double' values 8-byte alignment, with one
     exception: function arguments of type `double' may not be aligned.

     As a result, if a function compiled with Sun CC takes the address
     of an argument of type `double' and passes this pointer of type
     `double *' to a function compiled with GNU CC, dereferencing the
     pointer may cause a fatal signal.

     One way to solve this problem is to compile your entire program
     with GNU CC.  Another solution is to modify the function that is
     compiled with Sun CC to copy the argument into a local variable;
     local variables are always properly aligned.  A third solution is
     to modify the function that uses the pointer to dereference it via
     the following function `access_double' instead of directly with
     `*':

          inline double
          access_double (double *unaligned_ptr)
          {
            union d2i { double d; int i[2]; };

            union d2i *p = (union d2i *) unaligned_ptr;
            union d2i u;

            u.i[0] = p->i[0];
            u.i[1] = p->i[1];

            return u.d;
          }

     Storing into the pointer can be done likewise with the same union.

   * On Solaris, the `malloc' function in the `libmalloc.a' library may
     allocate memory that is only 4 byte aligned.  Since GNU CC on the
     Sparc assumes that doubles are 8 byte aligned, this may result in a
     fatal signal if doubles are stored in memory allocated by the
     `libmalloc.a' library.

     The solution is to not use the `libmalloc.a' library.  Use instead
     `malloc' and related functions from `libc.a'; they do not have
     this problem.

   * On a Sun, linking using GNU CC fails to find a shared library and
     reports that the library doesn't exist at all.

     This happens if you are using the GNU linker, because it does only
     static linking and looks only for unshared libraries.  If you have
     a shared library with no unshared counterpart, the GNU linker
     won't find anything.

     We hope to make a linker which supports Sun shared libraries, but
     please don't ask when it will be finished--we don't know.

   * Sun forgot to include a static version of `libdl.a' with some
     versions of SunOS (mainly 4.1).  This results in undefined symbols
     when linking static binaries (that is, if you use `-static').  If
     you see undefined symbols `_dlclose', `_dlsym' or `_dlopen' when
     linking, compile and link against the file `mit/util/misc/dlsym.c'
     from the MIT version of X windows.

   * The 128-bit long double format that the Sparc port supports
     currently works by using the architecturally defined quad-word
     floating point instructions.  Since there is no hardware that
     supports these instructions they must be emulated by the operating
     system.  Long doubles do not work in Sun OS versions 4.0.3 and
     earlier, because the kernel eumulator uses an obsolete and
     incompatible format.  Long doubles do not work in Sun OS versions
     4.1.1 to 4.1.3 because of emululator bugs that cause random
     unpredicatable failures.  Long doubles appear to work in Sun OS 5.x
     (Solaris 2.x).

     A future implementation of the sparc long double support will use
     functions calls to library routines instead of the quad-word
     floating point instructions.  This will allow long doubles to work
     in more situtations, since one can then substitute a working
     library if the kernel emulator is buggy.

   * On HP-UX version 9.01 on the HP PA, the HP compiler `cc' does not
     compile GNU CC correctly.  We do not yet know why.  However, GNU CC
     compiled on earlier HP-UX versions works properly on HP-UX 9.01
     and can compile itself properly on 9.01.

   * On the HP PA machine, ADB sometimes fails to work on functions
     compiled with GNU CC.  Specifically, it fails to work on functions
     that use `alloca' or variable-size arrays.  This is because GNU CC
     doesn't generate HP-UX unwind descriptors for such functions.  It
     may even be impossible to generate them.

   * Debugging (`-g') is not supported on the HP PA machine, unless you
     use the preliminary GNU tools (*note Installation::.).

   * Taking the address of a label may generate errors from the HP-UX
     PA assembler.  GAS for the PA does not have this problem.

   * Using floating point parameters for indirect calls to static
     functions will not work when using the HP assembler.  There simply
     is no way for GCC to specify what registers hold arguments for
     static functions when using the HP assembler.  GAS for the PA does
     not have this problem.

   * For some very large functions you may receive errors from the HP
     linker complaining about an out of bounds unconditional branch
     offset.  Fixing this problem correctly requires fixing problems in
     GNU CC and GAS.  We hope to fix this in time for GNU CC 2.6.
     Until then you can work around by making your function smaller,
     and if you are using GAS, splitting the function into multiple
     source files may be necessary.

   * GNU CC compiled code sometimes emits warnings from the HP-UX
     assembler of the form:

          (warning) Use of GR3 when
            frame >= 8192 may cause conflict.

     These warnings are harmless and can be safely ignored.

   * The current version of the assembler (`/bin/as') for the RS/6000
     has certain problems that prevent the `-g' option in GCC from
     working.  Note that `Makefile.in' uses `-g' by default when
     compiling `libgcc2.c'.

     IBM has produced a fixed version of the assembler.  The upgraded
     assembler unfortunately was not included in any of the AIX 3.2
     update PTF releases (3.2.2, 3.2.3, or 3.2.3e).  Users of AIX 3.1
     should request PTF U403044 from IBM and users of AIX 3.2 should
     request PTF U416277.  See the file `README.RS6000' for more
     details on these updates.

     You can test for the presense of a fixed assembler by using the
     command

          as -u < /dev/null

     If the command exits normally, the assembler fix already is
     installed.  If the assembler complains that "-u" is an unknown
     flag, you need to order the fix.

   * On the IBM RS/6000, compiling code of the form

          extern int foo;

          ... foo ...

          static int foo;

     will cause the linker to report an undefined symbol `foo'.
     Although this behavior differs from most other systems, it is not a
     bug because redefining an `extern' variable as `static' is
     undefined in ANSI C.

   * AIX on the RS/6000 provides support (NLS) for environments outside
     of the United States.  Compilers and assemblers use NLS to support
     locale-specific representations of various objects including
     floating-point numbers ("." vs "," for separating decimal
     fractions).  There have been problems reported where the library
     linked with GCC does not produce the same floating-point formats
     that the assembler accepts.  If you have this problem, set the
     LANG environment variable to "C" or "En_US".

   * On the RS/6000, XLC version 1.3.0.0 will miscompile `jump.c'.  XLC
     version 1.3.0.1 or later fixes this problem.  We do not yet have a
     PTF number for this fix.

   * There is an assembler bug in versions of DG/UX prior to 5.4.2.01
     that occurs when the `fldcr' instruction is used.  GNU CC uses
     `fldcr' on the 88100 to serialize volatile memory references.  Use
     the option `-mno-serialize-volatile' if your version of the
     assembler has this bug.

   * On VMS, GAS versions 1.38.1 and earlier may cause spurious warning
     messages from the linker.  These warning messages complain of
     mismatched psect attributes.  You can ignore them.  *Note VMS
     Install::.

   * On NewsOS version 3, if you include both of the files `stddef.h'
     and `sys/types.h', you get an error because there are two typedefs
     of `size_t'.  You should change `sys/types.h' by adding these
     lines around the definition of `size_t':

          #ifndef _SIZE_T
          #define _SIZE_T
          ACTUAL TYPEDEF HERE
          #endif

   * On the Alliant, the system's own convention for returning
     structures and unions is unusual, and is not compatible with GNU
     CC no matter what options are used.

   * On the IBM RT PC, the MetaWare HighC compiler (hc) uses a different
     convention for structure and union returning.  Use the option
     `-mhc-struct-return' to tell GNU CC to use a convention compatible
     with it.

   * On Ultrix, the Fortran compiler expects registers 2 through 5 to
     be saved by function calls.  However, the C compiler uses
     conventions compatible with BSD Unix: registers 2 through 5 may be
     clobbered by function calls.

     GNU CC uses the same convention as the Ultrix C compiler.  You can
     use these options to produce code compatible with the Fortran
     compiler:

          -fcall-saved-r2 -fcall-saved-r3 -fcall-saved-r4 -fcall-saved-r5

   * On the WE32k, you may find that programs compiled with GNU CC do
     not work with the standard shared C ilbrary.  You may need to link
     with the ordinary C compiler.  If you do so, you must specify the
     following options:

          -L/gnu/lib/gcc-lib/we32k-att-sysv/2.5 -lgcc -lc_s

     The first specifies where to find the library `libgcc.a' specified
     with the `-lgcc' option.

     GNU CC does linking by invoking `ld', just as `cc' does, and there
     is no reason why it *should* matter which compilation program you
     use to invoke `ld'.  If someone tracks this problem down, it can
     probably be fixed easily.

   * On the Alpha, you may get assembler errors about invalid syntax as
     a result of floating point constants.  This is due to a bug in the
     C library functions `ecvt', `fcvt' and `gcvt'.  Given valid
     floating point numbers, they sometimes print `NaN'.

   * On Irix 4.0.5F (and perhaps in some other versions), an assembler
     bug sometimes reorders instructions incorrectly when optimization
     is turned on.  If you think this may be happening to you, try
     using the GNU assembler; GAS version 2.1 supports ECOFF on Irix.

     Or use the `-noasmopt' option when you compile GNU CC with itself,
     and then again when you compile your program.  (This is a temporary
     kludge to turn off assembler optimization on Irix.)  If this
     proves to be what you need, edit the assembler spec in the file
     `specs' so that it unconditionally passes `-O0' to the assembler,
     and never passes `-O2' or `-O3'.


File: gcc.info,  Node: External Bugs,  Next: Incompatibilities,  Prev: Interoperation,  Up: Trouble

Problems Compiling Certain Programs
===================================

   * Parse errors may occur compiling X11 on a Decstation running
     Ultrix 4.2 because of problems in DEC's versions of the X11 header
     files `X11/Xlib.h' and `X11/Xutil.h'.  People recommend adding
     `-I/usr/include/mit' to use the MIT versions of the header files,
     using the `-traditional' switch to turn off ANSI C, or fixing the
     header files by adding this:

          #ifdef __STDC__
          #define NeedFunctionPrototypes 0
          #endif

   * If you have trouble compiling Perl on a SunOS 4 system, it may be
     because Perl specifies `-I/usr/ucbinclude'.  This accesses the
     unfixed header files.  Perl specifies the options

          -traditional -Dvolatile=__volatile__
          -I/usr/include/sun -I/usr/ucbinclude
          -fpcc-struct-return

     all of which are unnecessary with GCC 2.4.5 and newer versions.
     You can make a properly working Perl by setting `ccflags' and
     `cppflags' to empty values in `config.sh', then typing `./doSH;
     make depend; make'.

   * On various 386 Unix systems derived from System V, including SCO,
     ISC, and ESIX, you may get error messages about running out of
     virtual memory while compiling certain programs.

     You can prevent this problem by linking GNU CC with the GNU malloc
     (which thus replaces the malloc that comes with the system).  GNU
     malloc is available as a separate package, and also in the file
     `src/gmalloc.c' in the GNU Emacs 19 distribution.

     If you have installed GNU malloc as a separate library package,
     use this option when you relink GNU CC:

          MALLOC=/gnu/lib/libgmalloc.a

     Alternatively, if you have compiled `gmalloc.c' from Emacs 19, copy
     the object file to `gmalloc.o' and use this option when you relink
     GNU CC:

          MALLOC=gmalloc.o