Fresh Fish 4/FreshFish_May-June1994.bin/bbs/gnu/gs-2.6.1.4-src.lha/src/amiga/ghostscript-2.6.1/vms-gcc.mak

Text File | 1994-01-28 | 6.5 KB | 287 lines

$ !    Copyright (C) 1989, 1992, 1993 Aladdin Enterprises.  All rights reserved.
$ !
$ ! This file is part of Ghostscript.
$ !
$ ! Ghostscript is distributed in the hope that it will be useful, but
$ ! WITHOUT ANY WARRANTY.  No author or distributor accepts responsibility
$ ! to anyone for the consequences of using it or for whether it serves any
$ ! particular purpose or works at all, unless he says so in writing.  Refer
$ ! to the Ghostscript General Public License for full details.
$ !
$ ! Everyone is granted permission to copy, modify and redistribute
$ ! Ghostscript, but only under the conditions described in the Ghostscript
$ ! General Public License.  A copy of this license is supposed to have been
$ ! given to you along with Ghostscript so you can know your rights and
$ ! responsibilities.  It should be in a file named COPYING.  Among other
$ ! things, the copyright notice and this notice must be preserved on all
$ ! copies.
$ !
$ !
$ ! "makefile" for Ghostscript, VMS / GNU C / DECwindows (X11) configuration.
$ !
$ !
$ ! Execute this command file while in the Ghostscript directory!
$ !
$ !
$ ! To build a debugging configuration, issue the command:
$ !
$ !          $ @VMS-CC.MAK DEBUG
$ !
$ ! Do not  abbreviate "DEBUG".  To specify an alternate directory for
$ ! GS_LIB_DEFAULT, issue the command:
$ !
$ !          $ @VMS-CC.MAK directory
$ !
$ ! with "directory" a fully qualified directory name.  "directory" cannot
$ ! be DEBUG (otherwise it will be confused with the DEBUG switch).  Both
$ ! the DEBUG switch and a directory name may be specified on the same
$ ! command line and in either order.
$ !
$ CDEF = ""
$ LDEF = ""
$ !
$ GS_INIT = "GS_INIT.PS"
$ GS_LIB_DEFAULT = F$ENVIRONMENT("DEFAULT")
$ IF P1 .NES. "" .AND. P1 .NES. "DEBUG" THEN GS_LIB_DEFAULT = P1
$ IF P2 .NES. "" .AND. P2 .NES. "DEBUG" THEN GS_LIB_DEFAULT = P2
$ !
$ IF P1 .NES. "DEBUG" .AND. P2 .NES. "DEBUG" THEN GOTO NODEBUG
$ CDEF = "/DEFINE=(""DEBUG"")/NOOPTIMIZE/DEBUG"
$ LDEF = "/DEBUG"
$ !
$ NODEBUG:
$ !
$ ! Is GNU C about and defined?
$ !
$ IF F$TRNLNM("GNU_CC") .NES. "" THEN GOTO GNU_CC_OKAY
$ WRITE SYS$OUTPUT "GNU_CC logical is undefined.  You must execute the command"
$ WRITE SYS$OUTPUT "file GCC_INSTALL.COM in the GNU CC directory before using"
$ WRITE SYS$OUTPUT "this command file."
$ EXIT
$ !
$ !
$ GNU_CC_OKAY:
$ SET COMMAND GNU_CC:[000000]GCC.CLD
$ !
$ !
$ ! Compile genarch.c and then run it to create the arch.h header file
$ !
$ GCC/NOLIST/OBJECT=GENARCH.OBJ GENARCH.C
$ LINK/NOMAP/EXE=GENARCH.EXE GENARCH,GNU_CC:[000000]GCCLIB/LIB,SYS$INPUT/OPT
SYS$SHARE:VAXCRTL/SHARE
$ GENARCH = "$" + F$ENVIRONMENT("DEFAULT") + "GENARCH.EXE"
$ GENARCH ARCH.H
$ DELETE GENARCH.EXE.*,GENARCH.OBJ.*
$ PURGE ARCH.H
$ !
$ !
$ ! Create a minimal gconfig.h.  To add devices, look in DEVS.MAK to find
$ ! the files that comprise the driver, and add them to the compilation
$ ! and linking lists below.  Then add a line below the CREATE of the form
$ !    device__(gs_the-device-name_device)
$ ! e.g.
$ !    device__(gs_bj10e_device)
$ ! To incorporate compiled fonts, add the line
$ !    oper__(ccfonts_op_defs)
$ ! Also add the name ICCFONT and the names of the compiled fonts
$ ! to the compilation and linking lists.
$ !
$ !
$ CREATE GCONFIG.H
#include "gsconfig.h"
device__(gs_x11_device)
$ !
$ !
$ ! Create gconfigf.h similarly.  This is only used for compiled fonts.
$ ! For each compiled font XYZ, add a line of the form
$ !    font_("0.font_XYZ",gsf_XYZ,zf_XYZ)
$ ! If you defined a "short name" for the font (see fonts.doc),
$ ! that is what you should use for XYZ.
$ !
$ !
$ CREATE GCONFIGF.H
$ !
$ ! Create an empty object library
$ !
$ LIBRARY/CREATE GS.OLB
$ !
$ !
$ ! Create a list of modules to compile and store in the object library
$ !
$ CREATE MODULES.LIS
GDEVMEM1
GDEVMEM2
GDEVMEM3
GP_NOFB
GP_VMS
GSCHAR
GSCHAR0
GSCIE
GSCOLOR
GSCOLOR2
GSCOORD
GSDEVICE
GSDPS1
GSFILE
GSFONT
GSHT
GSIMAGE
GSIMAGE1
GSIMAGE2
GSIMPATH
GSLINE
GSMATRIX
GSMISC
GSPAINT
GSPATH
GSPATH2
GSSTATE
GSTDEV
GSTYPE1
GSUTIL
GXCCACHE
GXCCMAN
GXCLIST
GXCLREAD
GXCMAP
GXCPATH
GXDITHER
GXDRAW
GXFILL
GXHINT1
GXHINT2
GXHT
GXPATH
GXPATH2
GXPCOPY
GXSTROKE
IALLOC
IBNUM
ICCFONT
IDEBUG
IDICT
IDPARAM
IINIT
INAME
INTERP
ISAVE
ISCAN
ISCAN2
IUTIL
SBITS
SCFD
SCFDTAB
SCFE
SCFTAB
SDCTD
SDCTE
SFILTER
SFILTER2
SLZWD
SLZWE
STREAM
ZARITH
ZARRAY
ZBSEQ
ZCHAR
ZCHAR2
ZCIE
ZCOLOR
ZCOLOR2
ZCONTROL
ZCSPACE2
ZDEVICE
ZDICT
ZDPS1
ZFILE
ZFILEDEV
ZFILEIO
ZFILTER
ZFILTER2
ZFONT
ZFONT0
ZFONT1
ZFONT2
ZGENERIC
ZGSTATE
ZHT
ZHT2
ZIMAGE2
ZMATH
ZMATRIX
ZMISC
ZMISC2
ZPACKED
ZPAINT
ZPATH
ZPATH2
ZPROPS
ZRELBIT
ZSTACK
ZSTRING
ZTYPE
ZUPATH
ZVMEM
ZVMEM2
$ !
$ !
$ ! NOW COMPILE AWAY!
$ !
$ OPEN/READ MODULE_LIST MODULES.LIS
$ !
$ COMPILE_LOOP:
$ READ/END=END_COMPILE MODULE_LIST MODULE
$ GCC'CDEF/NOLIST/OBJECT='MODULE'.OBJ 'MODULE'.C
$ LIBRARY/INSERT GS.OLB 'MODULE'.OBJ
$ DELETE 'MODULE'.OBJ.*
$ GOTO COMPILE_LOOP
$ !
$ END_COMPILE:
$ CLOSE MODULE_LIST
$ DELETE MODULES.LIS.*
$ !
$ !
$ ! Is the DECwindows environment about?  Must be installed in order to
$ ! build the executable program gs.exe.
$ !
$ IF F$SEARCH("SYS$SHARE:DECW$XLIBSHR.EXE") .NES. "" THEN GOTO CHECK2
$ WRITE SYS$OUTPUT "DECwindows user environment not installed;"
$ WRITE SYS$OUTPUT "unable to build executable programs."
$ GOTO DONE
$ !
$ CHECK2:
$ IF F$TRNLNM("DECW$INCLUDE") .NES. "" THEN GOTO BUILD_EXES
$ WRITE SYS$OUTPUT "You must invoke @DECW$STARTUP before using this"
$ WRITE SYS$OUTPUT "command procedure to build the executable programs."
$ GOTO DONE
$ !
$ !
$ BUILD_EXES:
$ !
$ LIBDEF = """GS_LIB_DEFAULT=""""" + ''GS_LIB_DEFAULT' + """"""""
$ INIDEF = """GS_INIT=""""" + ''GS_INIT' + """"""""
$ GCC'CDEF/NOLIST/DEFINE=('LIBDEF','INIDEF')/OBJECT=GCONFIG.OBJ GCONFIG.C
$ GCC'CDEF/NOLIST/INCLUDE_DIRECTORY='F$TRNLNM("SYS$COMMON") -
    /OBJECT=GDEVXINI.OBJ GDEVXINI.C
$ GCC'CDEF/NOLIST/INCLUDE_DIRECTORY='F$TRNLNM("SYS$COMMON") -
    /OBJECT=GDEVX.OBJ GDEVX.C
$ GCC'CDEF/NOLIST/INCLUDE_DIRECTORY='F$TRNLNM("SYS$COMMON") -
    /OBJECT=GDEVXXF.OBJ GDEVXXF.C
$ GCC'CDEF/NOLIST/OBJECT=GSMAIN.OBJ GSMAIN.C
$ !
$ GCC'CDEF/NOLIST/OBJECT=GS.OBJ GS.C
$ LINK'LDEF/NOMAP/EXE=GS.EXE GS,GSMAIN,GDEVX,GDEVXINI,GDEVXXF,GCONFIG,-
  GS/LIB/INCLUDE=(GDEVMEM1,GDEVMEM2,GDEVMEM3,GXCLIST,GXCLREAD,-
  ZARITH,ZARRAY,ZBSEQ,ZCHAR,ZCOLOR,ZCOLOR2,ZCONTROL,ZDEVICE,ZDPS1,-
  ZDICT,ZFILE,ZFILEDEV,ZFILEIO,ZFILTER,ZFILTER2,ZFONT,ZFONT0,ZFONT1,ZFONT2,-
  ZGENERIC,ZGSTATE,ZHT,ZIMAGE2,ZMATH,ZMATRIX,ZMISC,-
  ZPACKED,ZPAINT,ZPATH,ZPATH2,-
  ZPROPS,ZRELBIT,ZSTACK,ZSTRING,ZTYPE,ZUPATH,ZVMEM),SYS$INPUT/OPT
SYS$SHARE:DECW$DWTLIBSHR/SHARE,SYS$SHARE:DECW$XLIBSHR.EXE/SHARE
$ !
$ DELETE GDEVX.OBJ.*,GDEVXINI.OBJ.*,GDEVXXF.OBJ.*,GSMAIN.OBJ.*,GS.OBJ.*,-
         GCONFIG.OBJ.*
$ !
$ DONE:
$ ! ALL DONE