home *** CD-ROM | disk | FTP | other *** search
Makefile | 1994-02-24 | 4.6 KB | 162 lines |
- # Makefile for Texinfo distribution. -*- Indented-Text -*-
- # Copyright (C) 1993 Free Software Foundation, Inc.
-
- # This program is free software; you can redistribute it and/or modify
- # it under the terms of the GNU General Public License as published by
- # the Free Software Foundation; either version 2, or (at your option)
- # any later version.
-
- # This program is distributed in the hope that it will be useful,
- # but WITHOUT ANY WARRANTY; without even the implied warranty of
- # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- # GNU General Public License for more details.
-
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- #### Start of system configuration section. ####
-
- srcdir = @srcdir@
- VPATH = $(srcdir):$(common)
-
- common = $(srcdir)/libtxi
-
- CC = @CC@
-
- INSTALL = @INSTALL@
- INSTALL_PROGRAM = @INSTALL_PROGRAM@
- INSTALL_DATA = @INSTALL_DATA@
-
- LN = ln
- RM = rm -f
- TAR = tar
- MKDIR = mkdir
-
- DEFS = @DEFS@
- LIBS = @LIBS@
- LOADLIBES = $(LIBS)
-
- ALLOCA = @ALLOCA@
-
- SHELL = /bin/sh
-
- CFLAGS = -O2
- LDFLAGS =
-
- prefix = /gnu
- exec_prefix = $(prefix)
- bindir = $(exec_prefix)/bin
- # Prefix for each installed program, normally empty or `g'.
- binprefix =
- libdir = $(prefix)/lib
- # Prefix for each installed man page, normally empty or `g'.
- manprefix =
- mandir = $(prefix)/man/man1
- manext = 1
- infodir = $(prefix)/info
-
- # For info program.
- DEFAULT_INFOPATH = $(infodir):.
-
- #### End of system configuration section. ####
-
- VERSION = 3.1
- DISTNAME = texinfo-$(VERSION)
-
- # Subdirectories that have makefiles
- SUBDIRS = libtxi makeinfo info util
-
- # All subdirectories that go into a distribution
- ALL_SUBDIRS = $(SUBDIRS) emacs
-
- MDEFINES = bindir='$(bindir)' mandir='$(mandir)' manext='$(manext)' \
- prefix='$(prefix)' binprefix='$(binprefix)' \
- manprefix='$(manprefix)' infodir='$(infodir)' CFLAGS='$(CFLAGS)' \
- CC='$(CC)' ALLOCA='$(ALLOCA)' LDFLAGS='$(LDFLAGS)' \
- DEFAULT_INFOPATH='$(DEFAULT_INFOPATH)'
-
- all: sub-all texi.info
-
- install: all installdirs
- for dir in $(SUBDIRS); do echo making $@ in $$dir; cd $$dir; $(MAKE) $(MDEFINES) $@; cd ..; done
- d=$(srcdir); test -f ./texi.info && d=.; \
- cd $$d; for f in texi.info* ; do $(INSTALL_DATA) $$f $(infodir)/$$f; done
-
- installdirs:
- -sh $(srcdir)/util/mkinstalldirs $(bindir) $(datadir) $(libdir) $(infodir) $(mandir)
-
- uninstall:
- for dir in $(SUBDIRS); do echo making $@ in $$dir; cd $$dir; $(MAKE) $(MDEFINES) $@; cd ..; done
- rm -f $(infodir)/texi.info*
-
- Makefile: Makefile.in config.status
- sh ./config.status
-
- config.status: configure
- $(srcdir)/configure --srcdir=$(srcdir) --no-create
-
- configure: configure.in
- cd $(srcdir); autoconf
-
- sub-all TAGS:
- for dir in $(SUBDIRS); do echo making $@ in $$dir; cd $$dir; $(MAKE) $(MDEFINES) $@; cd ..; done
-
- clean mostlyclean:
- for dir in $(SUBDIRS); do echo making $@ in $$dir; cd $$dir; $(MAKE) $(MDEFINES) $@; cd ..; done
-
- distclean: clean
- for dir in $(SUBDIRS); do echo making $@ in $$dir; cd $$dir; $(MAKE) $(MDEFINES) $@; cd ..; done
- rm -f Makefile config.status
-
- realclean:
- for dir in $(SUBDIRS); do echo making $@ in $$dir; cd $$dir; $(MAKE) $(MDEFINES) realclean; cd ..; done
- rm -f TAGS texi.info* Makefile config.status configure
-
- texi.info:
- ./makeinfo/makeinfo -I$(srcdir) texi.texi
-
- texinfo.dvi:
- PATH="$(srcdir)/util:$${PATH}" TEXINPUTS="$(srcdir):$(common):$${TEXINPUTS}" texi2dvi $(srcdir)/texi.texi
-
- dist: DISTFILES
- rm -rf $(DISTNAME)
- mkdir $(DISTNAME)
- for d in $(ALL_SUBDIRS); do mkdir $(DISTNAME)/$$d; done
- for f in `cat DISTFILES`; do \
- ln $(srcdir)/$$f $(DISTNAME)/$$f || { echo copying $$f; cp -p $(srcdir)/$$f $(DISTNAME)/$$f ; } \
- done
- tar --gzip -chvf $(DISTNAME).tar.z $(DISTNAME)
- rm -rf $(DISTNAME)
-
- # Gets rid of most of the unwanted files. Verify manually (if necessary)
- # that this produces a list of all the files desired in the distribution.
- DISTFILES: force
- (cd $(srcdir); find . $(ALL_SUBDIRS) ! -type d -print) \
- | sed '/\/RCS\//d; \
- /\.tar.*/d; \
- /~$$/d; /\.o$$/d; \
- /\/config\.status$$/d; \
- /\/Makefile$$/d; \
- /\/.*\.BAK$$/d; \
- /\/core$$/d; \
- /\/a.out$$/d; \
- /\/=/d; \
- /\/conftest\.c$$/d; \
- /\/DISTFILES$$/d; \
- /\.toc$$/d; \
- /\.aux$$/d; /\.log$$/d; \
- /\.cps$$/d; /\.cp$$/d; \
- /\.fns$$/d; /\.fn$$/d; \
- /\.tps$$/d; /\.tp$$/d; \
- /\.vrs$$/d; /\.vr$$/d; \
- /\.pgs$$/d; /\.pg$$/d; \
- /\.kys$$/d; /\.ky$$/d; \
- s/^.\///; /^\.$$/d;' \
- | sort | uniq > DISTFILES
-
- force:
-
- # Prevent GNU make v3 from overflowing arg limit on SysV.
- .NOEXPORT:
-