home *** CD-ROM | disk | FTP | other *** search
- #ifndef RESOURCES_BATTMEMBITSSHARED_H
- #define RESOURCES_BATTMEMBITSSHARED_H 1
- /*
- ** $Filename: resources/battmembitsshared.h $
- ** $Release: 2.04 Includes, V37.4 $
- ** $Revision: 1.1 $
- ** $Date: 90/05/25 $
- **
- ** BattMem shared specific bit definitions.
- **
- ** (C) Copyright 1989-1991 Commodore-Amiga Inc.
- ** All Rights Reserved
- */
-
-
- /*
- * Shared bits in the battery-backedup ram.
- *
- * Bits 64 and above
- */
-
- /*
- * SHARED_AMNESIA
- *
- * The battery-backedup memory has had a memory loss.
- * This bit is used as a flag that the user should be
- * notified that all battery-backed bit have been
- * reset and that some attention is required. Zero
- * indicates that a memory loss has occured.
- */
-
- #define BATTMEM_SHARED_AMNESIA_ADDR 64
- #define BATTMEM_SHARED_AMNESIA_LEN 1
-
-
- /*
- * SCSI_HOST_ID
- *
- * a 3 bit field (0-7) that is stored in complemented form
- * (this is so that default value of 0 really means 7)
- * It's used to set the A3000 controllers SCSI ID (on reset)
- */
-
- #define BATTMEM_SCSI_HOST_ID_ADDR 65
- #define BATTMEM_SCSI_HOST_ID_LEN 3
-
-
- /*
- * SCSI_SYNC_XFER
- *
- * determines if the driver should initiate synchronous
- * transfer requests or leave it to the drive to send the
- * first request. This supports drives that crash or
- * otherwise get confused when presented with a sync xfer
- * message. Default=0=sync xfer not initiated.
- */
-
- #define BATTMEM_SCSI_SYNC_XFER_ADDR 68
- #define BATTMEM_SCSI_SYNC_XFER_LEN 1
-
-
- #endif /* RESOURCES_BATTMEMBITSSHARED_H */
-