home *** CD-ROM | disk | FTP | other *** search
- IFND RESOURCES_BATTMEMBITSAMIGA_I
- RESOURCES_BATTMEMBITSAMIGA_I SET 1
- **
- ** $VER: battmembitsamiga.i 39.3 (14.9.92)
- ** Includes Release 40.15
- **
- ** BattMem Amiga specific bit definitions.
- **
- ** (C) Copyright 1989-1993 Commodore-Amiga Inc.
- ** All Rights Reserved
- **
-
-
- *
- * Amiga specific bits in the battery-backedup ram.
- *
- * Bits 0 to 31, inclusive
- *
-
- *
- * AMIGA_AMNESIA
- *
- * The battery-backedup memory has had a memory loss.
- * This bit is used as a flag that the user should be
- * notified that all battery-backed bit have been
- * reset and that some attention is required. Zero
- * indicates that a memory loss has occured.
- *
-
- BATTMEM_AMIGA_AMNESIA_ADDR EQU 0
- BATTMEM_AMIGA_AMNESIA_LEN EQU 1
-
-
- *
- * SCSI_TIMEOUT
- *
- * adjusts the timeout value for SCSI device selection. A
- * value of 0 will produce short timeouts (128 ms) while a
- * value of 1 produces long timeouts (2 sec). This is used
- * for SeaCrate drives (and some Maxtors apparently) that
- * don`t respond to selection until they are fully spun up
- * and intialised.
- *
-
- BATTMEM_SCSI_TIMEOUT_ADDR EQU 1
- BATTMEM_SCSI_TIMEOUT_LEN EQU 1
-
-
- *
- * SCSI_LUNS
- *
- * Determines if the controller attempts to access logical
- * units above 0 at any given SCSI address. This prevents
- * problems with drives that respond to ALL LUN addresses
- * (instead of only 0 like they should). Default value is
- * 0 meaning don't support LUNs.
- *
-
- BATTMEM_SCSI_LUNS_ADDR EQU 2
- BATTMEM_SCSI_LUNS_LEN EQU 1
-
- ENDC ; RESOURCES_BATTMEMBITSAMIGA_I
-