Fresh Fish 5/FreshFish_July-August1994.bin/bbs/gnu/gzip-1.2.4-src.lha/src/amiga/gzip-1.2.4/INSTALL

Text File | 1994-02-23 | 11KB | 274 lines

This is a generic INSTALL file for utilities distributions.
Some features specific to gzip have been added.

To compile this package:

1.  Configure the package for your system.  In the directory that this
file is in, type `./configure'.  If you're using `csh' on an old
version of System V, you might need to type `sh configure' instead to
prevent `csh' from trying to execute `configure' itself. If you
are using Ultrix, you might need to type `sh5 configure' to avoid
bugs in /bin/sh. Note that 'sh -x configure' may give different results
than 'sh configure', making it difficult to debug configure scripts.

The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation, and
creates the Makefile(s) (one in each subdirectory of the source
directory).  In some packages it creates a C header file containing
system-dependent definitions.  It also creates a file `config.status'
that you can run in the future to recreate the current configuration.

Running `configure' takes a minute or two.  While it is running, it
prints some messages that tell what it is doing.  If you don't want to
see the messages, run `configure' with its standard output redirected
to `/dev/null'; for example, `./configure >/dev/null'.

To compile the package in a different directory from the one
containing the source code, you must use a version of `make' that
supports the VPATH variable, such as GNU `make'.  `cd' to the directory
where you want the object files and executables to go and run
`configure'.  `configure' automatically checks for the source code in
the directory that `configure' is in and in `..'.  If for some reason
`configure' is not in the source code directory that you are
configuring, then it will report that it can't find the source code.
In that case, run `configure' with the option `--srcdir=DIR', where
DIR is the directory that contains the source code.

By default, `make install' will install the package's files in
/gnu/bin, /gnu/lib, /gnu/man, etc.  You can specify an
installation prefix other than /gnu by giving `configure' the option
`--prefix=PATH'.  Alternately, you can do so by consistently giving a value
for the `prefix' variable when you run `make', e.g.,
    make prefix=/usr/gnu
    make prefix=/usr/gnu install

You can specify separate installation prefixes for
architecture-specific files and architecture-independent files.  If
you give `configure' the option `--exec-prefix=PATH' or set the
`make' variable `exec_prefix' to PATH, the package will use PATH as
the prefix for installing programs and libraries.  Data files and
documentation will still use the regular prefix.  Normally, all files
are installed using the regular prefix.

Another `configure' option is useful mainly in `Makefile' rules for
updating `config.status' and `Makefile'.  The `--no-create' option
figures out the configuration for your system and records it in
`config.status', without actually configuring the package (creating
`Makefile's and perhaps a configuration header file).  Later, you can
run `./config.status' to actually configure the package.  You can also
give `config.status' the `--recheck' option, which makes it re-run
`configure' with the same arguments you used before.  This option is
useful if you change `configure'.

`configure' ignores any other arguments that you give it.

If your system requires unusual options for compilation or linking
that `configure' doesn't know about, you can give `configure' initial
values for some variables by setting them in the environment.  In
Bourne-compatible shells, you can do that on the command line like
this:
    CC='gcc -traditional' DEFS=-D_POSIX_SOURCE ./configure

For csh compatible shells, you can do something like this:

    (setenv CC 'gcc -traditional' ; ./configure)

The `make' variables that you might want to override with environment
variables when running `configure' are:

(For these variables, any value given in the environment overrides the
value that `configure' would choose:)
CC        C compiler program.
        Default is `cc', or `gcc' if `gcc' is in your PATH.
INSTALL        Program to use to install files.
        Default is `install' if you have it, `cp' otherwise.
        If you have an non-standard `install', use INSTALL="cp -p"

(For these variables, any value given in the environment is added to
the value that `configure' chooses:)
DEFS        Configuration options, in the form `-Dfoo -Dbar ...'
CFLAGS        Compiler options, such as `-O -g ...'
LIBS        Libraries to link with, in the form `-lfoo -lbar ...'

If you need to do unusual things to compile the package, we encourage
you to figure out how `configure' could check whether to do them, and
mail diffs or instructions to the address given in the README so we
can include them in the next release.

2.  Type `make' to compile the package.  If you want, you can override
the `make' variables CFLAGS and LDFLAGS like this:

    make CFLAGS=-O2 LDFLAGS=-s

3.  The package comes with self-tests. If you want to run them,
type `make check'.

4.  Type `make install' to install programs, data files, and
documentation. This creates links between gzip, gunzip and zcat.
You can create additional links uncompress, ungzip and gzcat if
you prefer these names. You can also create links to unpack and pcat
if your system uses packed files by default and you want to transform
them transparently to gzip'ed files.

If you wish to use only the name gzcat and not overwrite an existing zcat, use:

    make ZCAT=gzcat install

The man pages are installed by default with an extension `.1' (one).
If you want the extension `.l' (lower case L) use:

    make manext=l install

If you are using csh or tcsh, you must type `rehash' after `make install'
to make sure that the command `gzip' will invoke the new executable.

5.  You can remove the program binaries and object files from the
source directory by typing `make clean'.  To also remove the
Makefile(s), the header file containing system-dependent definitions
(if the package uses one), and `config.status' (all the files that
`configure' created), type `make distclean'.

The file `configure.in' is used as a template to create `configure' by
a program called `autoconf'.  You will only need it if you want to
regenerate `configure' using a newer version of `autoconf'.

6.  You  can add the following  lines  to your  /etc/magic file so that
file(1), if  your system supports it,  will recognize files created by
gzip:

0    string        \037\213    gzip compressed data
>2    byte        8        - deflate method
>3    byte        &0x1        , ascii
>3    byte        &0x2        , continuation
>3    byte        &0x4        , extra field
>3    byte        &0x8        , original file name
>3    byte        &0x10        , comment
>3    byte        &0x20        , encrypted
>8    byte        2        , max compression
>8    byte        4        , max speed

If your version of 'file' does not accept octal numbers in strings, replace the
first line with one of these:

0    short        0x8b1f        gzip compressed data
0    short        0105437        gzip compressed data

0    short        0x1f8b        gzip compressed data
0    short        017613        gzip compressed data

Use the first or second form if your machine is a 386 or a Vax or a
MIPS configured in little-endian mode or any other little-endian
machine. Use the third or fourth form on big-endian machines.
On some systems, the field separators must contain only tabs (no spaces).

7. To rename .z files with the new .gz suffix, you can use or adapt
   the following shell script:

#!/bin/sh
find . -name '*.z' -type f -print | while read i
do
    new=`echo "$i" | sed 's/\.z$/.gz/'`
    mv "$i" "$new" || echo Failed renaming $i to $new
done

If you wish to keep the old .z suffix as default without setting the
GZIP environment variable to "--suffix .z", you can compile gzip with:

   make CFLAGS='-DZ_SUFFIX=\".z\"'


8.  Special targets

- For MSDOS, OS/2, VMS, Atari, Amiga, Primos, use the makefile or command
  file provided in the appropriate subdirectory. For Turbo C++ 1.0, read
  the warning at the top of Makefile.bor.

- On some systems memcpy() may not work as expected. (Problem found on
  Pyramid only so far.) If you get "crc error" on some .gz files, add
  -DNOMEMCPY to CFLAGS and recompile inflate.o. For example:
    rm -f inflate.o
    make CFLAGS="-O2 -DNOMEMCPY"

  The memcpy