home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fresh Fish 8
/
FreshFishVol8-CD2.bin
/
bbs
/
gnu
/
ispell-4.0-src.lha
/
ispell-4.0
/
Makefile.in
< prev
next >
Wrap
Makefile
|
1994-09-03
|
7KB
|
232 lines
# Makefile for GNU ispell. -*- Indented-Text -*-
# Copyright (C) 1992, 1993 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#### Start of system configuration section. ####
srcdir = @srcdir@
VPATH = @srcdir@
CC = @CC@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
DEFS = @DEFS@
LIBS = @LIBS@
CHARSET = @CHARSET@
ALLOCA = @ALLOCA@
CFLAGS = -O2
LDFLAGS =
prefix = /gnu
exec_prefix = $(prefix)
bindir = $(exec_prefix)/bin
datadir = $(prefix)/lib/ispell
libdir = $(prefix)/lib/emacs/site-lisp
infodir = $(prefix)/info
# Where to install the manual pages.
mandir = $(prefix)/man/man1
# Prefix for each installed man page, normally empty or `g'.
manprefix =
# Extension (not including `.') for the installed manual page filenames.
manext = 1
#### End of system configuration section. ####
SHELL = /bin/sh
LOADLIBES = $(LIBS)
DISTNAME = ispell-$(VERSION)
VERSION = `sed -e '/version/!d;s/[^0-9.]*\([0-9.]*\).*/\1/;q' version.c`
# All subdirectories that go into a distribution
# There are none at the moment.
ALL_SUBDIRS =
# charset.c is automatically generated from c-generic.c or c-ibmpc.c
# during configuration.
SRCS = access.c c-generic.c c-ibmpc.c charset.h ctbl.c downcase.c exp.c \
expand.c freq.c getopt.c getopt1.c getopt.h hash.c hash.h lexfsm.c \
look.c mapcase.c nextprime.c suf.c version.c util.c
OBJS = access.o charset.o ctbl.o downcase.o exp.o getopt.o getopt1.o hash.o \
lexfsm.o nextprime.o suf.o version.o util.o $(ALLOCA)
SRCS_BUILD = build.c build.h mklextbl.c
OBJS_BUILD = build.o mklextbl.o
SRCS_LOOK = look.c getopt.c getopt1.c util.c
OBJS_LOOK = look.o getopt.o getopt1.o util.o $(ALLOCA)
SRCS_ISPELL = case.c gen.c good.c good.h ispell.c ispell.h priv.c screen.c term.c tex.c
OBJS_ISPELL = ispell.o case.o gen.o good.o priv.o screen.o term.o tex.o
SRCS_ALL = $(SRCS) $(SRCS_BUILD) $(SRCS_ISPELL)
OBJS_ALL = $(OBJS) $(OBJS_BUILD) $(OBJS_ISPELL)
DICT_LIB = $(datadir)
.c.o:
$(CC) -c -I$(srcdir) $(DEFS) -DDICT_LIB=\"$(DICT_LIB)\" $(CPPFLAGS) $(CFLAGS) $<
all: build look ispell ispell.dict ispell.words ispell.info ispell.elc
### targets required by GNU Coding standards ###
Makefile: Makefile.in config.status
sh ./config.status
config.status: configure
$(srcdir)/configure --srcdir=$(srcdir) --no-create
configure: configure.in
cd $(srcdir); autoconf
TAGS: $(SRCS) $(SRCS_BUILD) $(SRCS_ISPELL)
cd $(srcdir); etags $(SRCS) $(SRCS_BUILD) $(SRCS_ISPELL)
clean:
rm -f *.o *.elc ispell build freq core ispell.a freqtbl expand look
mostlyclean: clean
rm -f ispell.dict ispell.words
distclean: clean
rm -f Makefile config.status charset.c
realclean: distclean mostlyclean
rm -f TAGS ispell.info configure
install: all installdirs
$(INSTALL_PROGRAM) ispell $(bindir)/ispell
$(INSTALL_PROGRAM) look $(bindir)/look
$(INSTALL_DATA) ispell.dict $(datadir)/ispell.dict
$(INSTALL_DATA) ispell.words $(datadir)/ispell.words
-$(INSTALL_DATA) $(srcdir)/ispell.1 $(mandir)/ispell.$(manext)
-d=$(srcdir); test -f ./ispell.info && d=.; \
cd $$d; for f in ispell.info* ; do $(INSTALL_DATA) $$f $(infodir)/$$f; done
-$(INSTALL_DATA) $(srcdir)/ispell.el $(libdir)/ispell.el
-$(INSTALL_DATA) ispell.elc $(libdir)/ispell.elc
installdirs:
-sh $(srcdir)/mkinstalldirs $(bindir) $(datadir) $(libdir) $(infodir) $(mandir)
uninstall: force
-cd $(bindir); rm -f ispell look
-cd $(datadir); rm -f ispell.dict ispell.words
-cd $(infodir); rm -f ispell.info
-cd $(mandir); rm -f ispell.$(manext)
-cd $(libdir); rm -f ispell.el ispell.elc
dist: DISTFILES
rm -rf $(DISTNAME)
mkdir $(DISTNAME)
for f in `cat DISTFILES`; do \
ln $(srcdir)/$$f $(DISTNAME)/$$f || { echo copying $$f; cp -p $(srcdir)/$$f $(DISTNAME)/$$f ; } \
done
tar --gzip -chvf $(DISTNAME).tar.z $(DISTNAME)
rm -rf $(DISTNAME)
# Gets rid of most of the unwanted files. Verify manually (if necessary)
# that this produces a list of all the files desired in the distribution.
DISTFILES: force
(cd $(srcdir); find . $(ALL_SUBDIRS) ! -type d -print) \
| sed '/\/RCS\//d; \
/\.tar.*/d; \
/\/#.*#/d; /~$$/d; /\.o$$/d; \
/\/config\.status$$/d; \
/\/Makefile$$/d; \
/\/.*\.BAK$$/d; \
/\/core$$/d; \
/\/a.out$$/d; \
/\/=/d; \
/\/conftest\.c$$/d; \
/\/DISTFILES$$/d; \
/\/charset\.c/d; \
/\.toc$$/d; \
/\.aux$$/d; /\.log$$/d; \
/\.cps$$/d; /\.cp$$/d; \
/\.fns$$/d; /\.fn$$/d; \
/\.tps$$/d; /\.tp$$/d; \
/\.vrs$$/d; /\.vr$$/d; \
/\.pgs$$/d; /\.pg$$/d; \
/\.kys$$/d; /\.ky$$/d; \
s/^.\///; /^\.$$/d;' \
| sort | uniq > DISTFILES
### ispell-specific building targets ###
$(OBJS_ALL): ispell.h
build: $(OBJS_BUILD) $(OBJS)
$(CC) $(LDFLAGS) -o build $(OBJS_BUILD) $(OBJS) $(LOADLIBES)
expand: expand.o $(OBJS)
$(CC) $(LDFLAGS) -o expand expand.o $(OBJS) $(LOADLIBES)
freq: freq.o $(OBJS)
$(CC) $(LDFLAGS) -o freq freq.o $(OBJS) $(LOADLIBES)
freqtbl: freq dict
./freq < $(srcdir)/dict > freqtbl
look: $(OBJS_LOOK)
$(CC) $(LDFLAGS) -o look $(OBJS_LOOK) $(LOADLIBES)
ispell: $(OBJS_ISPELL) $(OBJS)
$(CC) $(LDFLAGS) -o ispell $(OBJS_ISPELL) $(OBJS) $(LOADLIBES)
ispell.info: ispell.texi
makeinfo --no-split -I$(srcdir) ispell.texi
ispell.dvi: ispell.texi
texi2dvi $(srcdir)/ispell.texi
ispell.dict: build dict freqtbl
./build -b -f freqtbl -o ispell.dict $(srcdir)/dict
ispell.words: dict expand
./expand $(srcdir)/dict | sort | uniq > ispell.words
charset.c: $(CHARSET)
cp $(srcdir)/$(CHARSET) charset.c
# If $(srcdir) is not the build directory, the emacs -batch command
# fails, at least for the AmigaDOS version. So if there is no ispell.el
# in the build directory, copy one from the source directory.
ispell.elc: ispell.el
-if [ ! -f ispell.el ]; then \
cp $(srcdir)/ispell.el ispell.el; \
touch tmp-ispell.el; \
fi
emacs -batch -l ispell.el -f batch-make-ispell
-if [ -f tmp-ispell.el ]; then \
rm ispell.el tmp-ispell.el; \
fi
force:
# Prevent GNU make v3 from overflowing arg limit on SysV.
.NOEXPORT: