home *** CD-ROM | disk | FTP | other *** search
/ Caldera Network Desktop 1.0 / caldera-network-desktop-1.0.bin / images / 1213 / boot0002.img / startup / etc / lilo.msg < prev   
Text File  |  1995-11-01  |  1KB  |  25 lines
  1.               Red Hat Linux 2.1
  2.  
  3. You are at the LILO boot prompt.  If Linux is having trouble properly
  4. detecting your hardware, try setting some hardware parameters here.
  5.  
  6. IDE Hard Drives                     hd[a,b,c,d]=cylinders,heads,sectors
  7. Mitsumi CD-ROM                      mcd=port,irq
  8. Sony 31&33 CD-ROM REQUIRED          cdu31a=base_addr,[irq|0][,PAS]
  9. Aztech CD268                        aztcd=port
  10. Ethernet Card                       ether=irq,base_addr,mem_start,mem_end
  11. Bus Mouse                           bmouse=irq
  12. SCSI Seagate ST0x                   st0x=base_addr,irq
  13. SCSI Future Domain TMC-8xx          tmc8xx=base_addr,irq
  14. SCSI Trantor T128                   t128=base_addr,irq
  15. SCSI NCR-5380 Based                 ncr5380=port,irq,dma_channel
  16. Adaptec 15{1,2}x, SoundBlasterSCSI  aha152x=port,irq,scsi_id,reconnect,parity
  17. Adaptec 1542                        aha1542=base_addr
  18. Buslogic                            buslogic=base_addr
  19. Pro Audio Spectrum / Studio 16      pas16=port,irq
  20. SoundBlaster Pro or 16 compatible   sbpcd=io_addr,{SoundBlaster,Lasermate,SPEA}
  21. ATAPI/IDE CD-ROM Drives             hd{a,b,c,d}=cdrom
  22.         (all addresses (not IRQs) should begin with 0x; ie. 0x340) 
  23. Enter "linux <param> <param> ..." (or just hit ENTER to auto-detect).
  24.  
  25.