home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DeathMatch 2 for Doom 2
/
Deathmatch2.bin
/
readme.txt
< prev
next >
Wrap
Text File
|
1996-02-26
|
2KB
|
62 lines
To Install DEATHMATCH I or DEATCHMATCH II
FOR HELP CALL 612-646-8967 or FAX 612-646-1675
1. Insert your DEATHMATCH cd rom into your cd-rom drive.
2. Goto your cd rom drive root directory (ie, d:\)
3. Type INSTALL
4. At the DEATHMATCH install screen follow the directions
and enter the proper information.
5. Deathmatch is now installed in your DOOM I and
or DOOM II directories.
To Run DEATHMATCH I or DEATCHMATCH II
1. Goto the DOOM I or DOOM II directory.
2. Type in the word "dmatch" then press the enter key.
3. When you are asked for the letter of your CD-ROM drive
enter only the letter for example D if it is D:
4. You may click on the help button on each screen and then
print. This is the manual to use with the program.
Note: You must have a properly installed mouse with a
DOS driver installed.
TROUBLESHOOTING ADDENDUM
If you require Technical assistance to run DEATHMATCH for DOOM
please read the help screens or you may call the Help line as listed
on the paper insert.
Here are some notes on some common problems:
I can see the install screen and do the install but DEATHMATCH does
not run ????.
-Type in dmatch at the DOOM directory
-If you are using QEMM you may need to free up more
video memory, refer to the QEMM manual. You may
be able to add "X=A000-BFFF" on your QEMM configuration
line in the CONFIG.SYS file. Please refer to your documentation.
-This product will not work with the norton smartdrive.
-Do not use QEMM or EMM386.
My mouse will not work ????
You must have and use a MOUSE with this product. The
DOS mouse driver must be installed.
The dmatch menu comes up but there is no information on the
Levels menu ????.
Make sure the DEATHMATCH CD_ROM is in your CD-ROM
drive.