home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Dye Another Day
/
DyeAnotherDay.bin
/
swf
/
17-4.swf
/
texts
/
14.txt
< prev
next >
Wrap
Text File
|
2003-04-03
|
4KB
|
67 lines
This technique is fast and simple. It requires the use of paints, thickened dyes or inks
--- RECORDSEPARATOR ---
to add colour to fabric, which has already been dyed. I'll be using fabric inks and
--- RECORDSEPARATOR ---
'Jacquard Lumiere' for something special. The tools required are rollers, stamps,
--- RECORDSEPARATOR ---
containers to mix paint and a stirring stick, a plate, gloves and a well-ventilated area.
--- RECORDSEPARATOR ---
I'll be using fabric from a 'Tray Dyeing' exercise. When you mix paints, it's always
--- RECORDSEPARATOR ---
easier to start with the lightest colour, a little less than you think you'll need, and add
--- RECORDSEPARATOR ---
the darker colour a little at a time. In this instance we are going to make pink from
--- RECORDSEPARATOR ---
white and red. Keep adding small amounts of red until you get to the desired colour.
--- RECORDSEPARATOR ---
If you do it the other way around, it takes a lot more white to get the red down to
--- RECORDSEPARATOR ---
the shade of pink that you are after. You'll have far too much paint and you'll have
--- RECORDSEPARATOR ---
wasted a lot of it. When you have the desired colour, spread some over the surface
--- RECORDSEPARATOR ---
of the plate. You won't need much. Spread it wide enough that it will cover the
--- RECORDSEPARATOR ---
surface of the roller. Apply the roller to the paint and keep rolling the paint over the
--- RECORDSEPARATOR ---
plate until the roller is evenly covered.
--- RECORDSEPARATOR ---
Spread the fabric out over the surface. Apply the paint with the roller evenly onto
--- RECORDSEPARATOR ---
the stamp of your choice. Place the stamp into position on the fabric and press
--- RECORDSEPARATOR ---
down. Continue this process until you have enough designs over the surface of the
--- RECORDSEPARATOR ---
fabric. Knowing when to stop, or as us mothers always say, knowing when enough is
--- RECORDSEPARATOR ---
enough, is half the trick to a successful design. This one needs more work. Take
--- RECORDSEPARATOR ---
another colour paint, this one is green, and a stamp and repeat the process. I've used
--- RECORDSEPARATOR ---
a different design, but you could just as easily use the same design. Adding a new
--- RECORDSEPARATOR ---
design gives the textile more movement and therefore more interest. Resist the urge
--- RECORDSEPARATOR ---
to make the design symmetrical. Now with a fine brush and black paint, I'm going to
--- RECORDSEPARATOR ---
fill some of the spaces with squiggles. Often these meaningless squiggles are the
--- RECORDSEPARATOR ---
perfect way of finishing off a piece. They fill empty spaces, provide a smooth
--- RECORDSEPARATOR ---
transition from one design element to the next, and add further dimension to the
--- RECORDSEPARATOR ---
textile. If you are not comfortable working freehand, then a smaller simple stamp will
--- RECORDSEPARATOR ---
do the trick. With the same brush and a different colour I have added centres to the
--- RECORDSEPARATOR ---
flowers. This gives a focal point for the eye to rest on and provides definition to the
--- RECORDSEPARATOR ---
flower. It's what we expect to see, when you see a flower. Here is the finished piece,
--- RECORDSEPARATOR ---
and more examples of stamped fabrics. You will see that this style of surface design
--- RECORDSEPARATOR ---
has limitless possibilities. Even the same stamp will look completely different on
--- RECORDSEPARATOR ---
different fabrics, with different inks, and in different positions. Explore, experiment
--- RECORDSEPARATOR ---
and have fun!