Boot Disc 18/boot-disc-1998-02.iso/CDArcht/MP6200.CD_/MP6200.CD/string.txt

Text File | 1997-10-13 | 7KB | 169 lines

5000    The command completed successfully.
5001    An error occurred and was recovered
5002    The drive is not ready.
5003    A medium error occurred.
5004    A hardware error occurred.
5005    An illegal request was received.
5006    The drive state has changed.
5008    Blank Check.
5011    The command was aborted.
6000    No sense.
6001    An I/O process was terminated.
6002    Play is currently in progress.
6003    Play has been paused.
6004    Recovery is needed.
6005    Recovery has failed.
6006    A seek error occurred.
6007    The drive isn't ready.
6008    The drive is becoming ready.
6009    The drive is not ready and needs initialization.
6010    The drive is not ready, please check the drive.
6011    The Optimum Power Calibration area is nearly full. It is recommended the disc be fixated after this track is written.
6012    A SCSI communication error occurred.
6013    A problem was encountered during radial tracking.
6014    A tracking servo failure occurred.
6015    A focus servo failure occurred.
6016    A spindle servo failure occurred.
6017    A radial skating error occurred.
6018    A sledge servo failure occurred.
6019    PLL no lock.
6020    A servo is off track.
6021    ATIP sync error.
6022    ATIP sub-code jumped.
6023    A write error has occurred.
6024    Invalid block size.
6025    A packet is too big to fit in the remaining space on the drive.
6026    A buffer under-run has occurred.
6027    The disc is not blank.
6028    The PMA is empty, the disc is blank.
6029    The PMA is not empty, the disc is not blank.
6030    An unrecovered read error occurred, most likely due to a flaw in the disc.
6031    Invalid UPC.
6032    An error occurred reading the UPC or ISRC on the disc.
6033    Invalid ISRC.
6034    A random positioning error has occurred.
6035    A read has been recovered.
6036    The read command required multiple retries.
6037    The read command required ECC correction for data recovery.
6038    The read command required ECC correction for data recovery.
6039    The command specified an illegal length for the parameter list.
6040    Invalid command parameter list.
6041    A specified address is out of range.
6042    An option was selected in the CDB that is not supported by this drive.
6043    The LUN in the CDB was nonzero.
6044    An option was selected in the parameter list that is not supported by this drive.
6045    A specified parameter is not supported.
6046    A specified parameter value is invalid.
6047    The disc is write protected.
6048    The disc may have changed.
6049    A power-on reset or bus-reset has occurred.
6050    Parameters have changed.
6051    Mode parameters have changed.
6052    Padding blocks were written to fill the remainder of the track.
6053    The command is not allowed in the current operational mode.
6054    A command was cleared by another initiator.
6055    The disc is not compatible.
6056    The disc can't be read. It is an unknown format.
6057    The disc can't be read. It is an incompatible format.
6058    The disc can't be written. It is an unknown format.
6059    The disc can't be written. It is an incompatible format.
6060    The disc medium is corrupted.
6061    The format command failed.
6062    Saving parameters is not supported.
6063    There is no disc in the drive.
6064    Target operating conditions have changed.
6065    The micro-code has changed.
6066    Inquiry data has changed.
6067    One or more components have failed diagnostics.
6068    Internal target failure.
6069    Reselect failure.
6070    The drive has detected a SCSI parity error.
6071    An error message was received.
6072    Invalid message.
6073    An overlapped command was attempted.
6074    A write append error occurred.
6075    The loading or unloading of the disc caddy has failed.
6076    Removal of the disc is currently prevented.
6077    Can't recover the TOC.
6078    The drive is unable to read the subcode of the current disc.
6079    The drive is unable to read the ATIP of the current disc.
6080    The drive is unable to read the ATIP or subcode of the current disc.
6081    The drive is unable to read the PMA of the current disc.
6082    The drive is unable to read the TOC, PMA, subcode, or ATIP of the current disc.
6083    The disc information can not be read.
6084    An operator request has occurred.
6085    The open button on the drive has been pressed.
6086    The requested block is beyond the end of the current track.
6087    The data in the track is not compatible with the current command.
6088    The read request was in the lead-in.
6089    The read request was in the lead-out.
6090    A session fixation error occurred.
6091    A session fixation error occurred writing the lead-in.
6092    A session fixation error occurred writing the lead-out.
6093    A session fixation error occurred due to an incomplete track.
6094    A session fixation error occurred due to a partial track.
6095    No cue sheet has been specified.
6096    The command is not valid at this time.
6097    Reserve track check error.
6098    Verify blank error.
6099    Mode of last track error.
6100    Header search error.
6101    Header monitor error.
6102    EDC Error.
6103    Read link run-in run-out.
6104    Last one block error.
6105    The selected block size is invalid for the current command.
6106    The data was not completely transferred.
6107    CDB Overrun.
6108    An invalid start address was specified.
6109    The disc application code does not match the host application code.
6110    The end of the disc was reached, 99 tracks have been written, or the OPC or PMA areas are full.
6111    Invalid track number.
6112    Syscon ROM error.
6113    Syscon RAM error.
6114    EFM Encoder error.
6115    EFM Decoder error.
6116    Servo IC error.
6117    Motor controller error.
6118    DAC Error.
6119    An EEPROM error occurred.
6120    Block decoder error.
6121    Block encoder communication error.
6122    Block encoder path error.
6123    The drive failed self-test.
6124    A buffer parity error occurred.
6125    A data transfer error occurred.
6126    An unwritten area of the disc was encountered.
6127    Illegal block length.
6128    Power calibration range error.
6129    Power range error.
6130    Modulation error.
6131    Beta upper range error.
6132    Beta lower range error.
6133    Alpha upper range error.
6134    Alpha lower range error.
6135    Alpha and power range error.
6136    There is no track to complete.
6137    The PMA is full.
6138    The PMA could not be updated.
6139    The Power Calibration Area is full. No further writes are allowed on this disc.
6140    12V failure.
6141    Unknown syscon error.
6142    Syscon communication error.
6143    Unknown syscon not ready.
6144    Syscon not ready.
6145    A command was rejected.
6146    A command was not accepted.
6147    Verify error at start of track.
6148    Verify error at end of track.
6149    Verify error at start of lead-in.
6150    Verify error at end of lead-in.
6151    Verify error at start of lead-out.
6152    Verify error at end of lead-out.
6153    Command phase time out.
6154    Data-in phase time out.
6155    Data-out phase time out.
6156    Status phase time out.
6157    Message-in phase time out.
6158    Message-out phase time out.