2
The Thomson Gateway informs you that you have not yet configured your Thomson Gateway.
 |
Proceed as follows:
1 |
2 |
Proceed as follows:
1 |
Connect your computer to the Thomson Gateway as described in Adding a Computer to your Network. |
2 |
Connect the Thomson Gateway to the DSL line. |
3 |
Connect the power supply. |
4 |
Turn on the Thomson Gateway. |
1 |
Open your web browser. |
2 |
The Thomson Gateway informs you that you have not yet configured your Thomson Gateway.
|
| If this window does not appear browse to http://dsldevice.lan or to the IP address of your Thomson Gateway (by default: 192.168.1.254) and click Thomson Gateway on the menu on the left-hand side. |
3 |
Click Setup my Thomson Gateway. |
4 |
The Easy Setup wizard appears. This wizard will guide you through the configuration of your Thomson Gateway. Click Next and follow the instructions. |