home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Magazyn Internet 2000 December
/
MICD_2000_12_NR1.iso
/
Dreamnet
/
drivery
/
Trendware
/
Te-16pct.exe
/
NDIS.DOS
/
IBMLSP
/
LANSVR23.TXT
next >
Wrap
Text File
|
1997-09-02
|
3KB
|
88 lines
LAN Server 2.0 or 3.0
---------------------
Introduction:
-------------
This document describes the procedure to install NDIS driver on DOS
LAN Requester for TE-16PnP Ethernet Card.
Location of Driver: \NDIS.DOS\PNPND.DOS (for DOS LAN Requester)
Installing driver procedure on DOS LAN Requester :
--------------------------------------------------
1. Insert the IBM LAN Support Program (LSP) Version 1.30 (or 1.31)
Diskette into your floppy drive A: .
2. Type A:\dxmaid and press <Enter> .
3. The screen will display the IBM logo. Press <Enter> twice until
the "Environment Information" appears on screen.
4. Responds to the screen prompts, specifying the following values
for each field,use the <Space Bar> to toggle between choices:
Configuration for this computer? Yes
Use existing configuration information? Yes
Do you have adapter option diskettes? Yes
Are you configuring for two adapters? No
Do you need 802.2 interface support? Yes
Source for LSP A:\
Target for new configuration C:\lsp
Make sure that the values given above are correct, then press
<Enter> to store your choices.
5. Insert the TE-16PnP Ethernet Card driver diskette in floppy A,and specify
your pathname A:\,then press ENTER.
6. Follow screen instructions to complete the process. Simply
pressing <Enter> for each screen display will select the default
options. Press <Enter> until you reach the display prompting you
to insert the LSP diskette.
7. Insert the LSP diskette as prompted. Press <Enter> to acknowledge
completion of the action.
8. A screen showing the current configuration detected will be
displayed. It should show the " TE-16PnP EthernetCard " and the
protocols already selected (i.e., "IBM IEEE 802.2" and
"IBM OS/2 NETBIOS").
9. Press <F4>. to save the new configuration. This completes the LSP
installation.
10. Save the configuration and reboot your computer.
11. Insert the DOS LAN Requester Install Diskette 1 into your floppy
drive.
12. Type A:\INSTALL <Enter>
13. The IBM logo will again appear on the screen. Press <Enter> to
move on to the next screen.
14. Follow screen instructions, pressing <Enter> to move from
screen-to-screen until you are prompted to indicate the pathname
of the DOS LAN Requester directory (C:\DOSLAN ).
15. Specify the pathname (C:\DOSLAN is the default) for the DOS LAN
Requester directory . Then press <Enter> to continue.
16. The program will ask you for the services that you require.
17. Highlight the appropriate option. Select either "Send messages"
or "Send, View, Edit, and Log message" option. (Normally, second
option "Send, View, Edit and Log message" is selected).
18. Specify the PC's ID and domain ID.
19. Follow screen prompts to complete the installation.
-----------------------------------[ END ]-------------------------------------