home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Magazyn Internet 2000 December
/
MICD_2000_12_NR1.iso
/
Dreamnet
/
drivery
/
Trendware
/
Te-16pct.exe
/
NDIS.DOS
/
IBMLSP
/
LANSVR40.TXT
< prev
Wrap
Text File
|
1997-09-02
|
1KB
|
43 lines
LAN Server 4.0
--------------
Introduction:
-------------
This document describes the procedure to install NDIS driver on DOS
LAN Services for TE-16PnP Ethernet Card.
Location of Driver: \NDIS.DOS\PNPND.DOS (for DOS LAN Services)
Installing driver procedure on DOS LAN Requester :
--------------------------------------------------
Before you start with the installation process, make sure that
DOS LAN Services is properly installed. Similarly, your adapter
should also be properly installed in your client PC.
1. Copy PNPND.DOS from your Driver diskette (A:\NDIS.DOS\) to DOS
LAN Services subdirectory C:\NET .
2. Under DOS LAN Requester subdirectory C:\NET, run INSTALL
3. The screen display some description. If it's correct, move
highlight to "The listed options are correct" item ,then press
ENTER.
4. Move highlight to "Network Card", then press ENTER.
5. Select "Change driver for network card." item, then press ENTER.
6. Select "Network card not shown in list below..", then press ENTER.
7. Insert the TE-16PnP Ethernet Card Driver diskette in floppy A,and specify
the pathname A:\,then press ENTER.
8. TE-16PnP Ethernet Card driver is now installed on your computer, reboot
your computer.
-----------------------------------[ END ]-------------------------------------