104 Cakewalk will now perform a series of tests that will determine the DMA settings of your Windows audio hardware.\n\n
105 Would you like to continue?
106 Detected: %s\n\nWould you like to use the standard settings for this device?\n\nChoose YES to use the standard settings (recommended).\nChoose NO to override the standard settings.
107 Audio hardware has been successfully profiled.
109 Microsoft Audio Compression Manager (MSACM) is missing or invalid. It may be installed from your Cakewalk setup disks by clicking on the 'Drivers' icon in the Control Panel.
111 An error occurred while profiling audio hardware.\n\n
112 If you experience synchronization problems between digital audio and MIDI, please contact Cakewalk technical support.
113 Auto-detect has been aborted.\nCurrent settings have been restored.
114 --- None ---
115 Cakewalk must now perform a series of tests to determine the timing characteristics of your Windows audio hardware.\n\n
116 To ensure the best possible synchronization between MIDI and digital audio, we recommend that you allow Cakewalk to perform
117 these tests now. However, you may also perform them at a later time by choosing Settings | Audio...\n\n
118 Would you like your hardware to be tested now?
119 Take%ld/%u
120 %ld Hz
121 %d: %s
122 %d: %s
123 However, some sample rates are not supported by your hardware.
124 Low-latency mixing requires all system background activity to be kept to a minimum. To prevent possible audio playback problems, please shut down all other programs while running Cakewalk.
