Usenet 1994 January

home *** CD-ROM | disk | FTP | other *** search

/ Usenet 1994 January / usenetsourcesnewsgroupsinfomagicjanuary1994.iso / sources / unix / volume16 / ida2 / part01 next >

Wrap

Internet Message Format | 1988-11-13 | 65.1 KB

Subject: v16i073: IDA Sendmail kit, Part01/08 Newsgroups: comp.sources.unix Sender: sources Approved: rsalz@uunet.UU.NET Submitted-by: Lennart Lovstrand <lovstran@arisia.xerox.com> Posting-number: Volume 16, Issue 73 Archive-name: ida2/part01 Hello & Welcome to the IDA* Sendmail Enhancement Kit (rev 1.2.5). The Kit includes a set of source code modifications to the BSD 4.3 sendmail program version 5.59. The changes will enable sendmail to have direct access to dbm(3) files and Sun's Yellow Pages, separate envelope/ header rewriting rulesets, and multi-token class matches among other things. Various bug fixes and other improvements has also been included. As a separate part of the Kit is the IDA Sendmail Master Configuration file and a sample setups used at the CIS Dept, U of Linkoping and at Rank Xerox EuroPARC. The configuration file together with the supplied data files and utility programs implement such nice features as pathalias based systems routing within sendmail, fully !-/@-translating rulesets, and generic local user addresses and again much more. See the "M4 IDENTIFIERS" section in ida/cf/Sendmail.mc for details and options. Finally, there is an accompanying paper on mail addressing issues in general and hybrid addresses in particular. Included in the paper is a description of the changes to sendmail and the configuration setup. Note however that the paper was written for the original (1.0) revision of the Kit and that it therefore may be out of date on some details. See the supplied README and INSTALL files for up-to-date information. To unpack the Kit, preferrably first cd to your sendmail source directory and then send the rest of this message and the following seven through /bin/sh or unshar. This should create a new "ida" subdirectory with all the Kit's files. If you are on the ARPA Internet, you may choose to retrieve the Kit in compressed tar format from ~ftp/pub1/ida.tar.Z on Arisia.Xerox.COM using anonymous ftp. A compressed executable binary of IDA sendmail for Sun-3/SunOS 3.x is also available as ~ftp/pub1/ida-sendmail-sun3.Z. Enjoy! --Lennart *) IDA is an abbreviation of "Institutionen for Datavetenskap", Swedish for "The Department of Computer and Information Science". Under no circumstance should it be confused with the IDA that stands for the Institute for Defense Analysis, with which the author has no relationship to nor wish to become associated with. --cut--here--cut--here--cut--here--cut--here--cut--here--cut--here-->8-- #! /bin/sh # This is a shell archive. Remove anything before this line, then unpack # it by saving it into a file and typing "sh file". To overwrite existing # files, type "sh file -c". You can also feed this as standard input via # unshar, or by typing "sh <file", e.g.. If this archive is complete, you # will see the following message at the end: # "End of archive 1 (of 8)." # Contents: ida ida/Makefile ida/aux ida/aux/Makefile ida/aux/header.c # ida/aux/mkdomext.c ida/aux/scanf.c ida/cf ida/cf/Makefile # ida/cf/Makefile.europarc ida/cf/Makefile.generic # ida/cf/Makefile.ida ida/cf/asterix.m4 ida/cf/cftest # ida/cf/client.m4 ida/cf/europarc.m4 ida/cf/majestix.m4 # ida/cf/newaliases.m4 ida/cf/obelix.m4 ida/cf/tests ida/doc # ida/doc/Makefile ida/doc/cover.tr ida/doc/mkdomext.1 # ida/doc/xalparse.8 ida/lib ida/lib/Makefile # ida/lib/Makefile.europarc ida/lib/Makefile.generic ida/lib/decnet # ida/lib/decnet/nodes ida/lib/decnet/xtable ida/lib/mailertable # ida/lib/restart_clients ida/lib/sendmail.hf ida/lib/sendmail.st # ida/lib/stop_clients ida/lib/uucp ida/lib/uucp/relays # ida/lib/uucp/xtable ida/patches ida/patches/MDBM.edit # ida/patches/Makefile ida/patches/Makefile.diff # ida/patches/Version.c.diff ida/patches/arpadate.c.diff # ida/patches/conf.c.diff ida/patches/conf.h.diff # ida/patches/domain.c.diff ida/patches/headers.c.diff # ida/patches/mdbm_compat.h ida/patches/queue.c.diff PATH=/bin:/usr/bin:/usr/ucb ; export PATH if test ! -d ida ; then echo shar: Creating directory \"ida\" mkdir ida fi if test -f ida/Makefile -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/Makefile\" else echo shar: Extracting \"ida/Makefile\" $1424 characters$ sed "s/^X//" >ida/Makefile <<'END_OF_ida/Makefile' X# X# MAKEFILE -- The IDA Sendmail Enhancement Kit. X# Copyright (c) 1987 Lennart Lovstrand X# CIS Dept, Univ of Linkoping, Sweden X# X# Use it, abuse it, but don't sell it. X# X X# Global definitions; will be exported to all Makefiles XMAN8DIR= /usr/man/manl # Place for the section 8 manuals XMAN8EXT= .l # Extension for section 8 manuals XMAN1DIR= /usr/man/manl # Place for the section 1 manuals XMAN1EXT= .l # Extension for section 1 manuals XBINDIR= /usr/local/bin # Where the binary aux files should go XLIBDIR= /usr/lib/mail # Where the data files should be XSRCDIR= ../../src # The sendmail src subdirectory XINCLUDEDIR= ../../include # The sendmail include subdirectory XDOCDIR= ../../doc # The sendmail doc subdirctory XMDBM= #-DMDBM -I$(SRCDIR) # Only defined if you want to use mdbm XDBMLIB= -ldbm # Change to -lmdbm if you use mdbm XDBMDIREXT= .dir # Change to .map for mdbm XDBMPAGEXT= .pag # Change to .dat for mdbm XTROFF= pstroff # The [nt]roff program of your choice X Xconfigure: config.ed X @echo ">>> Propagating changes to subdirectories." X for M in */Makefile; do \ X ed $$M <config.ed; \ X done X Xconfig.ed: Makefile X egrep '^[^# ].*=' Makefile | \ X sed -e 's/[ ]*#.*$$//' -e 's/#.*$$//' \ X -e 's/^$.*=$.*$$/g\/^\1\/c\\;&\\;./' | \ X tr ';' '\012' >$@ X echo w >>$@ X echo q >>$@ X Xclean: X -rm -f \#* *~ config.ed X Xspotless: clean X for d in */.; do \ X (cd $$d; make clean); \ X done END_OF_ida/Makefile if test 1424 -ne `wc -c <ida/Makefile`; then echo shar: \"ida/Makefile\" unpacked with wrong size! fi # end of overwriting check fi if test ! -d ida/aux ; then echo shar: Creating directory \"ida/aux\" mkdir ida/aux fi if test -f ida/aux/Makefile -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/aux/Makefile\" else echo shar: Extracting \"ida/aux/Makefile\" $938 characters$ sed "s/^X//" >ida/aux/Makefile <<'END_OF_ida/aux/Makefile' X# X# MAKEFILE -- Auxiliary Files. X# Copyright (c) 1987 Lennart Lovstrand X# CIS Dept, Univ of Linkoping, Sweden X# X# Use it, abuse it, but don't sell it. X# X# Rmail has it's own options, go change them there. X# X XBINS= dbm mkdomext scanf xalparse XCFLAGS= -O -DVMUNIX -I$(INCLUDEDIR) X X# The following definitions are inserted by ../Makefile X# Change them there--not here! XBINDIR= /usr/local/bin XLIBDIR= /usr/lib/mail XSRCDIR= ../../src XINCLUDEDIR= ../../include XDBMLIB= -ldbm X Xall: $(BINS) rmail X Xdbm: dbm.c X $(CC) $(CFLAGS) $(MDBM) -o dbm dbm.c $(DBMLIB) X Xrmail: rmail.c X $(CC) $(CFLAGS) $(MDBM) -o rmail rmail.c $(DBMLIB) X Xinstall: $(BINS) X cp $(BINS) $(BINDIR) X cd $(BINDIR); strip $(BINS) X @echo '>>> Do "make install-rmail" to explitly install rmail.' X Xinstall-rmail: rmail X install -m 4755 -o root -s rmail /bin X Xclean: X -rm -f \#* *~ *.o $(BINS) rmail X X.c.o: X $(CC) $(CFLAGS) -c $< X X.c: X $(CC) $(CFLAGS) -o $@ $< END_OF_ida/aux/Makefile if test 938 -ne `wc -c <ida/aux/Makefile`; then echo shar: \"ida/aux/Makefile\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/aux/header.c -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/aux/header.c\" else echo shar: Extracting \"ida/aux/header.c\" $1683 characters$ sed "s/^X//" >ida/aux/header.c <<'END_OF_ida/aux/header.c' X/* X** HEADER -- Header line parser. X** Copyright (c) 1985 Lennart Lovstrand X** CIS Dept, Univ of Linkoping, Sweden X** X** Use it, abuse it, but don't sell it. X** X** Version of 14-Apr-85. X*/ X X#include <stdio.h> X#include <strings.h> X#include <ctype.h> X#include "useful.h" X X#define H_CC "cc" X#define H_FROM "from" X#define H_MESSAGE_ID "message_id" X#define H_RETURN_PATH "return-path" X#define H_TO "to" X#define H_VIA "via" X X#define COMMA ',' X X#define MAKELC(C) (isupper(C) ? tolower(C) : C) X X/* X * iskey: checks if the line is prefixed by X * the supplied keyword (immediately followed by X * a colon) X */ Xiskey(key, line) Xchar *key, *line; X{ X for (; *key != NULL && *line != NULL; key++, line++) X if (MAKELC(*key) != MAKELC(*line)) X break; X X return *key == NULL && *line == ':'; X} X Xchar *eat(str, ch) Xchar *str, ch; X{ X for(; *str == ch; str++); X return str; X} X X/* X * extract_address: X * finds and extracts the machine address part of an address field X */ X Xchar *extract_address(field, address) Xchar *field, *address; X{ X char *address_start = address; X X while(*field && *field != COMMA && *field != '>') X switch (*field) { X case '<': X return extract_address(field, address_start); X case '(': X while (*field && *field != ')'); X field++; X break; X case '"': X do X *address++ = *field++; X while (*field && *field != '"'); X if (*field) X *address++ = *field++; X break; X case ' ': X *address++ = *field++; X field = eat(field, ' '); X break; X case '\\': X *address++ = *field++; X /* fall through */ X default: X *address++ = *field++; X } X *address = NULL; X if (*field) X return index(field, COMMA)+1; X else X return field; X} X X END_OF_ida/aux/header.c if test 1683 -ne `wc -c <ida/aux/header.c`; then echo shar: \"ida/aux/header.c\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/aux/mkdomext.c -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/aux/mkdomext.c\" else echo shar: Extracting \"ida/aux/mkdomext.c\" $2248 characters$ sed "s/^X//" >ida/aux/mkdomext.c <<'END_OF_ida/aux/mkdomext.c' X/* X** MKDOMEXT -- Extend domain names X** Copyright (c) 1987 Lennart Lovstrand X** CIS Dept, Univ of Linkoping, Sweden X** X** Use it, abuse it, but don't sell it. X*/ X X#include "useful.h" X#include <stdio.h> X#include <ctype.h> X X#ifndef lint Xstatic char SccsId[] = "@(#)mkdomext.c 1.5 (lel@ida.liu.se) 4/24/87"; X#endif !lint X Xvoid printf(), fprintf(); X Xchar *Progname; X Xmain(argc, argv) X int argc; X char **argv; X{ X char buf[BUFSIZ]; X char domains[BUFSIZ]; X char *tab, *p, *index(); X X Progname = argv[0]; X X if (argc == 1) { X fprintf(stderr, "%s: no domains?\n", Progname); X exit(1); X } X X /* collect the argument domain names */ X domains[0] = '\0'; X for (argc--, argv++; argc > 0; argc--, argv++) { X if (strlen(*argv) + 3 > sizeof(domains)) { X fprintf(stderr, "%s: too many domain arguments--\n %s %s %s\n", X Progname, X "chain two instances of", Progname, X "together or recompile with larger ``domains'' array"); X exit(1); X } X (void) strcat(domains, " ."); X (void) strcat(domains, *argv); X } X X while (gets(buf) != NULL) { X tab = index(buf, '\t'); X if (tab != NULL) X *tab = '\0'; X X for (p = index(buf, '.'); p != NULL; p = index(p + 1, '.')) { X if (instring(domains, p)) { X for (; p != NULL; p = index(p + 1, '.')) { X *p = '\0'; X if (tab != NULL) X printf("%s\t%s\n", buf, tab + 1); X else X printf("%s\n", buf); X *p = '.'; X } X break; X } X } X if (tab != NULL) X *tab = '\t'; X puts(buf); X } X} X X/* X** INSTRING -- Returns TRUE if the source string ``s'' can be found X** as a substring in target string ``t''. X*/ X Xinstring(t, s) X char *t, *s; X{ X extern char *index(); X register char *p; X register int len = strlen(s); X X for (p = index(t, *s); p != NULL; p = index(p + 1, *s)) X if (ispart(p, s, len)) X return TRUE; X return FALSE; X} X X/* X** ISPART -- Compare at most the first n chars of two strings X** without respect to upper/lower case. X*/ X Xispart(s, t, n) X register char *s, *t; X register int n; X{ X for (; n > 0 && *s != '\0' && *t != '\0'; s++, t++, n--) X if ((isupper(*s) ? tolower(*s) : *s) != X (isupper(*t) ? tolower(*t) : *t)) X break; X return (n == 0 || *s == *t); /* really *s == 0 && *t == 0 */ X} END_OF_ida/aux/mkdomext.c if test 2248 -ne `wc -c <ida/aux/mkdomext.c`; then echo shar: \"ida/aux/mkdomext.c\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/aux/scanf.c -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/aux/scanf.c\" else echo shar: Extracting \"ida/aux/scanf.c\" $1089 characters$ sed "s/^X//" >ida/aux/scanf.c <<'END_OF_ida/aux/scanf.c' X/* X** SCANF -- Program to scan & extract input lines. X** Copyright (c) 1987, 1988 Lennart Lovstrand X** CIS Dept, Univ of Linkoping, Sweden X** X** Use it, abuse it, but don't sell it. X** X** Very simple version 0.11 of Tue Aug 23 12:01:10 BST 1988 X*/ X X#include "useful.h" X#include <stdio.h> X#include <ctype.h> X Xmain(argc, argv) X int argc; X char **argv; X{ X char buf[BUFSIZ], val[BUFSIZ]; X FILE *input; X bool ignore_case = FALSE; X X if (argc > 1 && strcmp(argv[1], "-i") == 0) { X ignore_case = TRUE; X argc--; argv++; X } X X if (argc < 2 || argc > 3) { X fprintf(stderr, "usage: scanf [-i] scanf_pattern [file]\n"); X exit(1); X } X X if (ignore_case) X lower(argv[1]); X X if (argc == 2) X input = stdin; X else { X input = fopen(argv[2], "r"); X if (input == NULL) { X perror(argv[2]); X exit(1); X } X } X X while (fgets(buf, sizeof(buf), input) != NULL) { X if (ignore_case) X lower(buf); X if (sscanf(buf, argv[1], val) == 1) X puts(val); X } X} X Xlower(p) X register char *p; X{ X for (; *p != '\0'; p++) X if (isupper(*p)) X *p = tolower(*p); X} END_OF_ida/aux/scanf.c if test 1089 -ne `wc -c <ida/aux/scanf.c`; then echo shar: \"ida/aux/scanf.c\" unpacked with wrong size! fi # end of overwriting check fi if test ! -d ida/cf ; then echo shar: Creating directory \"ida/cf\" mkdir ida/cf fi if test -f ida/cf/Makefile -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/cf/Makefile\" else echo shar: Extracting \"ida/cf/Makefile\" $900 characters$ sed "s/^X//" >ida/cf/Makefile <<'END_OF_ida/cf/Makefile' X# X# MAKEFILE -- Configuration Files. X# Copyright (c) 1987 Lennart Lovstrand X# CIS Dept, Univ of Linkoping, Sweden X# X# Use it, abuse it, but don't sell it. X# X# Generic version. X XSITENAME= europarc XCONFIGS= $(SITENAME).cf newaliases.cf X X# The following definitions are inserted by ../Makefile X# Change them there--not here! XLIBDIR= /usr/lib/mail X Xall: $(CONFIGS) X Xinstall: $(CONFIGS) X cp $(SITENAME).cf /usr/lib/sendmail.cf X cp newaliases.cf $(LIBDIR) X Xdiff: X -diff /usr/lib/sendmail.cf $(SITENAME).cf X Xclean: X -rm -f \#* *~ *.cf X Xbackup: X tar cf Backup.tar *.m4 *.mc X X$(CONFIGS): Sendmail.mc X Xsendmail.cf Sendmail.cf: X @echo 'Based on what host/site? Do make <host>.cf instead.' X Xstop: X -skill sendmail X Xrestart: stop X /usr/lib/sendmail -bd -q30m X X.SUFFIXES: .cf .m4 X X.m4.cf: X @echo "# NOTE: This file was automatically generated from an m4 specification" >$*.cf X m4 $*.m4 >>$*.cf END_OF_ida/cf/Makefile if test 900 -ne `wc -c <ida/cf/Makefile`; then echo shar: \"ida/cf/Makefile\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/cf/Makefile.europarc -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/cf/Makefile.europarc\" else echo shar: Extracting \"ida/cf/Makefile.europarc\" $900 characters$ sed "s/^X//" >ida/cf/Makefile.europarc <<'END_OF_ida/cf/Makefile.europarc' X# X# MAKEFILE -- Configuration Files. X# Copyright (c) 1987 Lennart Lovstrand X# CIS Dept, Univ of Linkoping, Sweden X# X# Use it, abuse it, but don't sell it. X# X# Generic version. X XSITENAME= europarc XCONFIGS= $(SITENAME).cf newaliases.cf X X# The following definitions are inserted by ../Makefile X# Change them there--not here! XLIBDIR= /usr/lib/mail X Xall: $(CONFIGS) X Xinstall: $(CONFIGS) X cp $(SITENAME).cf /usr/lib/sendmail.cf X cp newaliases.cf $(LIBDIR) X Xdiff: X -diff /usr/lib/sendmail.cf $(SITENAME).cf X Xclean: X -rm -f \#* *~ *.cf X Xbackup: X tar cf Backup.tar *.m4 *.mc X X$(CONFIGS): Sendmail.mc X Xsendmail.cf Sendmail.cf: X @echo 'Based on what host/site? Do make <host>.cf instead.' X Xstop: X -skill sendmail X Xrestart: stop X /usr/lib/sendmail -bd -q30m X X.SUFFIXES: .cf .m4 X X.m4.cf: X @echo "# NOTE: This file was automatically generated from an m4 specification" >$*.cf X m4 $*.m4 >>$*.cf END_OF_ida/cf/Makefile.europarc if test 900 -ne `wc -c <ida/cf/Makefile.europarc`; then echo shar: \"ida/cf/Makefile.europarc\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/cf/Makefile.generic -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/cf/Makefile.generic\" else echo shar: Extracting \"ida/cf/Makefile.generic\" $939 characters$ sed "s/^X//" >ida/cf/Makefile.generic <<'END_OF_ida/cf/Makefile.generic' X# X# MAKEFILE -- Configuration Files. X# Copyright (c) 1987 Lennart Lovstrand X# CIS Dept, Univ of Linkoping, Sweden X# X# Use it, abuse it, but don't sell it. X# X# Generic version. X XSITENAME= # Value of `hostname | sed 's/\..*//'` or equiv XCONFIGS= $(SITENAME).cf newaliases.cf X X# The following definitions are inserted by ../Makefile X# Change them there--not here! XLIBDIR= /usr/lib/mail X Xall: $(CONFIGS) X Xinstall: $(CONFIGS) X cp $(SITENAME).cf /usr/lib/sendmail.cf X cp newaliases.cf $(LIBDIR) X Xdiff: X -diff /usr/lib/sendmail.cf $(SITENAME).cf X Xclean: X -rm -f \#* *~ *.cf X Xbackup: X tar cf Backup.tar *.m4 *.mc X X$(CONFIGS): Sendmail.mc X Xsendmail.cf Sendmail.cf: X @echo 'Based on what host/site? Do make <host>.cf instead.' X Xstop: X -skill sendmail X Xrestart: stop X /usr/lib/sendmail -bd -q30m X X.SUFFIXES: .cf .m4 X X.m4.cf: X @echo "# NOTE: This file was automatically generated from an m4 specification" >$*.cf X m4 $*.m4 >>$*.cf END_OF_ida/cf/Makefile.generic if test 939 -ne `wc -c <ida/cf/Makefile.generic`; then echo shar: \"ida/cf/Makefile.generic\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/cf/Makefile.ida -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/cf/Makefile.ida\" else echo shar: Extracting \"ida/cf/Makefile.ida\" $1235 characters$ sed "s/^X//" >ida/cf/Makefile.ida <<'END_OF_ida/cf/Makefile.ida' X# X# MAKEFILE -- Configuration Files. X# Copyright (c) 1987 Lennart Lovstrand X# CIS Dept, Univ of Linkoping, Sweden X# X# Use it, abuse it, but don't sell it. X# X# Special IDA version. X X XCONFIGS= asterix.cf client.cf majestix.cf newaliases.cf obelix.cf X XCLIENTS= crabbofix lillefix miraculix portofix prefix senilix \ X smidefix tragicomix X X# The following definitions are inserted by ../Makefile X# Change them there--not here! XLIBDIR= /usr/lib/mail X Xall: $(CONFIGS) X Xinstall: $(CONFIGS) X cp majestix.cf client.cf newaliases.cf $(LIBDIR) X rcp asterix.cf asterix:/usr/lib/sendmail.cf X mail -s sendmail.cf real_lel@obelix <obelix.cf X Xclients: $(CLIENTS) X X$(CLIENTS): X -rsh $@ rm /private$(LIBDIR)/sendmail.fc X -rcp client.cf $@:/private$(LIBDIR)/sendmail.cf X Xdiff: X -diff $(LIBDIR)/majestix.cf majestix.cf X -diff $(LIBDIR)/client.cf client.cf X Xclean: X -rm -f \#* *~ *.cf X Xbackup: X tar cf Backup.tar *.m4 *.mc X X$(CONFIGS): Sendmail.mc X Xsendmail.cf Sendmail.cf: X @echo 'Based on what host? Do make <host>.cf instead.' X Xstop: X -skill sendmail X Xrestart: stop X /usr/lib/sendmail -bd -q30m X X.SUFFIXES: .cf .m4 X X.m4.cf: X @echo "# NOTE: This file was automatically generated from an m4 specification" >$*.cf X m4 $*.m4 >>$*.cf END_OF_ida/cf/Makefile.ida if test 1235 -ne `wc -c <ida/cf/Makefile.ida`; then echo shar: \"ida/cf/Makefile.ida\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/cf/asterix.m4 -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/cf/asterix.m4\" else echo shar: Extracting \"ida/cf/asterix.m4\" $463 characters$ sed "s/^X//" >ida/cf/asterix.m4 <<'END_OF_ida/cf/asterix.m4' X# Sendmail configuration file for asterix.liu.se Xdefine(ALIASES, LIBDIR/aliases) Xdefine(DECNETXTABLE, LIBDIR/decnet/xtable) Xdefine(DECNETNODES, LIBDIR/decnet/nodes) Xdefine(DEFAULT_DOMAIN, liu.se) Xdefine(DOMAINTABLE, LIBDIR/domaintable) Xdefine(GENERICFROM, LIBDIR/generics) Xdefine(LIUIDA) Xdefine(MAILERTABLE, LIBDIR/mailertable) Xdefine(PATHTABLE, LIBDIR/pathtable) Xdefine(UUCPNODES, /usr/lib/uucp/L.sys) Xdefine(UUCPXTABLE, LIBDIR/uucp/xtable) Xinclude(Sendmail.mc) END_OF_ida/cf/asterix.m4 if test 463 -ne `wc -c <ida/cf/asterix.m4`; then echo shar: \"ida/cf/asterix.m4\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/cf/cftest -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/cf/cftest\" else echo shar: Extracting \"ida/cf/cftest\" $264 characters$ sed "s/^X//" >ida/cf/cftest <<'END_OF_ida/cf/cftest' X#!/bin/sh X# X# usage: cftest [sendmail_options] < test_file X# X# sends the test patterns on stdin through sendmail and X# collects the results. X# X X/usr/lib/sendmail -bt $* | awk '\ X !/^>/ {lastline = $0} \ X /^>/ {print lastline; print ""; print substr($0, 3, 999)}' END_OF_ida/cf/cftest if test 264 -ne `wc -c <ida/cf/cftest`; then echo shar: \"ida/cf/cftest\" unpacked with wrong size! fi chmod +x ida/cf/cftest # end of overwriting check fi if test -f ida/cf/client.m4 -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/cf/client.m4\" else echo shar: Extracting \"ida/cf/client.m4\" $427 characters$ sed "s/^X//" >ida/cf/client.m4 <<'END_OF_ida/cf/client.m4' X# Sendmail configuration file for Sun-3 clients (*.liu.se) Xdefine(ALIASES, LIBDIR/aliases) Xdefine(DECNETXTABLE, LIBDIR/decnet/xtable) Xdefine(DECNETNODES, LIBDIR/decnet/nodes) Xdefine(DEFAULT_DOMAIN, liu.se) Xdefine(DOMAINTABLE, LIBDIR/domaintable) Xdefine(GENERICFROM, LIBDIR/generics) Xdefine(LIUIDA) Xdefine(PSEUDONYMS, all) Xdefine(RELAY_HOST, majestix) Xdefine(RELAY_MAILER, TCP) Xdefine(RSH_SERVER, majestix) Xinclude(Sendmail.mc) END_OF_ida/cf/client.m4 if test 427 -ne `wc -c <ida/cf/client.m4`; then echo shar: \"ida/cf/client.m4\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/cf/europarc.m4 -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/cf/europarc.m4\" else echo shar: Extracting \"ida/cf/europarc.m4\" $544 characters$ sed "s/^X//" >ida/cf/europarc.m4 <<'END_OF_ida/cf/europarc.m4' X# Sendmail configuration file for domain EuroPARC.Xerox.COM Xdefine(ALIASES, %mail.aliases)dnl Xdefine(DOMAINTABLE, %mail.domaintable)dnl Xdefine(GENERICFROM, %mail.generics)dnl Xdefine(MAILERTABLE, LIBDIR/mailertable)dnl Xdefine(PATHTABLE, %mail.pathtable)dnl Xdefine(PSEUDODOMAINS, BITNET CSNET JUNET MAILNET UUCP)dnl Xdefine(RSH_SERVER, mailhost)dnl Xdefine(UUCPNODES, |uuname)dnl Xdefine(XEROXGV, Xerox.COM)dnl Xdefine(XEROXNS, XNS.EuroPARC.Xerox.COM)dnl Xdefine(XNSDOMAIN, IP:RX)dnl Xdefine(XNSMAIL, /usr/local/bin/xnsmail)dnl Xinclude(Sendmail.mc)dnl END_OF_ida/cf/europarc.m4 if test 544 -ne `wc -c <ida/cf/europarc.m4`; then echo shar: \"ida/cf/europarc.m4\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/cf/majestix.m4 -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/cf/majestix.m4\" else echo shar: Extracting \"ida/cf/majestix.m4\" $575 characters$ sed "s/^X//" >ida/cf/majestix.m4 <<'END_OF_ida/cf/majestix.m4' X# Sendmail configuration file for host majestix.liu.se Xdefine(ALIASES, LIBDIR/aliases) Xdefine(DECNETXTABLE, LIBDIR/decnet/xtable) Xdefine(DECNETNODES, LIBDIR/decnet/nodes) Xdefine(DEFAULT_DOMAIN, liu.se) Xdefine(DOMAINTABLE, LIBDIR/domaintable) Xdefine(GENERICFROM, LIBDIR/generics) Xdefine(LIUIDA) Xdefine(MAILERTABLE, LIBDIR/mailertable) Xdefine(PATHTABLE, LIBDIR/pathtable) Xdefine(PSEUDONYMS, ida.liu.se liuida all) Xdefine(UUCPNAME, liuida) Xdefine(UUCPNODES, /usr/lib/uucp/L.sys) Xdefine(UUCPRELAYS, LIBDIR/uucp/relays) Xdefine(UUCPXTABLE, LIBDIR/uucp/xtable) Xinclude(Sendmail.mc) END_OF_ida/cf/majestix.m4 if test 575 -ne `wc -c <ida/cf/majestix.m4`; then echo shar: \"ida/cf/majestix.m4\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/cf/newaliases.m4 -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/cf/newaliases.m4\" else echo shar: Extracting \"ida/cf/newaliases.m4\" $322 characters$ sed "s/^X//" >ida/cf/newaliases.m4 <<'END_OF_ida/cf/newaliases.m4' X# General configuration file for newaliases program X# X# Check that the DOMAINTABLE definition agrees with your site's setup. X# Note that ALIASES never, never, never should be set to a YP map here. X# Xdefine(ALIASES, LIBDIR/aliases)dnl Xdefine(DOMAINTABLE, %mail.domaintable)dnl Xdefine(NEWALIASES)dnl Xinclude(Sendmail.mc)dnl END_OF_ida/cf/newaliases.m4 if test 322 -ne `wc -c <ida/cf/newaliases.m4`; then echo shar: \"ida/cf/newaliases.m4\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/cf/obelix.m4 -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/cf/obelix.m4\" else echo shar: Extracting \"ida/cf/obelix.m4\" $320 characters$ sed "s/^X//" >ida/cf/obelix.m4 <<'END_OF_ida/cf/obelix.m4' X# Sendmail configuration file for host obelix.UUCP Xdefine(ALIASES, LIBDIR/aliases) Xdefine(BSD29) Xdefine(DEFAULT_DOMAIN, liu.se) Xdefine(RELAY_HOST, asterix) Xdefine(RELAY_MAILER, UUCP-B) Xdefine(PSEUDONYMS, obelix.UUCP obelix.liu.se obelix.liu obelix.ida.liu.se) Xdefine(UUCPNODES, /usr/lib/uucp/L.sys) Xinclude(Sendmail.mc) END_OF_ida/cf/obelix.m4 if test 320 -ne `wc -c <ida/cf/obelix.m4`; then echo shar: \"ida/cf/obelix.m4\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/cf/tests -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/cf/tests\" else echo shar: Extracting \"ida/cf/tests\" $98 characters$ sed "s/^X//" >ida/cf/tests <<'END_OF_ida/cf/tests' X3,19 a!b X3,19 a!b!c X3,19 a!b@c X3,19 a!b%c@d X3,19 a!b%c%d X3,19 a!b%c@d.d X3,19 a!b%c.c@d.d X3,19 a@b END_OF_ida/cf/tests if test 98 -ne `wc -c <ida/cf/tests`; then echo shar: \"ida/cf/tests\" unpacked with wrong size! fi # end of overwriting check fi if test ! -d ida/doc ; then echo shar: Creating directory \"ida/doc\" mkdir ida/doc fi if test -f ida/doc/Makefile -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/doc/Makefile\" else echo shar: Extracting \"ida/doc/Makefile\" $996 characters$ sed "s/^X//" >ida/doc/Makefile <<'END_OF_ida/doc/Makefile' X# X# MAKEFILE -- The Documentation Files. X# Copyright (c) 1987 Lennart Lovstrand X# CIS Dept, Univ of Linkoping, Sweden X# X# Use it, abuse it, but don't sell it. X# X XMAN1S= dbm.1 mkdomext.1 XMAN8S= xalparse.8 XMANS= $(MAN1S) $(MAN8S) XDOC= paper.ms XDOCS= part1.ms part2.ms X X# The following definitions are inserted by ../Makefile X# Change them there--not here! XMAN8DIR= /usr/man/manl XMAN8EXT= .l XMAN1DIR= /usr/man/manl XMAN1EXT= .l XTROFF= pstroff X Xdoc: $(DOC) X refer -e -l,2 -s $(DOC) | tbl | $(TROFF) -ms X Xdoc.lpr: $(DOC) X refer -e -l,2 -s $(DOC) | tbl | nroff -ms > $@ X Xman: $(MANS) X for m in $(MANS); do \ X $(TROFF) -man $$m; \ X done X Xman.lpr: $(MANS) X for m in $(MANS); do \ X nroff -man $$m > $$m.lpr; \ X done X X$(DOC): X cat $(DOCS) >$(DOC) X -rm -f $(DOCS) X Xinstall: $(MANS) X for m in $(MAN1S); do \ X cp $$m $(MAN1DIR)/`basename $$m .1`$(MAN1EXT); \ X done X for m in $(MAN8S); do \ X cp $$m $(MAN8DIR)/`basename $$m .8`$(MAN8EXT); \ X done X Xclean: X -rm -f \#* *~ *.lpr END_OF_ida/doc/Makefile if test 996 -ne `wc -c <ida/doc/Makefile`; then echo shar: \"ida/doc/Makefile\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/doc/cover.tr -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/doc/cover.tr\" else echo shar: Extracting \"ida/doc/cover.tr\" $227 characters$ sed "s/^X//" >ida/doc/cover.tr <<'END_OF_ida/doc/cover.tr' X.fp 1 R X.fp 2 I X.fp 3 B X.fp 4 S X.nf X.vs 0.3i X.sv 2.47i X.ce 100 X.ps 18 X.ft 2 XExamensarbete X.sp X.ft 3 XElectronic Mail Addressing Xin Theory and Practice X.ft 1 X.sp X.ps 14 XLennart L$o:vstrand X.sp X.ps 12 XLiTH-IDA-Ex-8715 X1987-05-27 END_OF_ida/doc/cover.tr if test 227 -ne `wc -c <ida/doc/cover.tr`; then echo shar: \"ida/doc/cover.tr\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/doc/mkdomext.1 -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/doc/mkdomext.1\" else echo shar: Extracting \"ida/doc/mkdomext.1\" \(1613 characters$ sed "s/^X//" >ida/doc/mkdomext.1 <<'END_OF_ida/doc/mkdomext.1' X.TH MKDOMEXT 1 "24 April 1987" \" -*- nroff -*- X.SH NAME Xmkdomext \- make the exteneded set of domain names X.SH SYNOPSIS X.B mkdomext X.IR domain " [\|.\|.\|.\|]" X.SH DESCRIPTION XThis program acts as a filter that, when supplied with fully qualified Xdomain names on stdin, will generate all legal abbreviations of these on Xstdout with respect to the parent domains given on the command line. It Xis used to be able to recognize unqualified local subdomains and sibling Xdomains from one or more positions in the domain hierarchy. X.PP XThe fully qualified domains on stdin should be given one on a line, each Xterminated by a newline or tab. Any text after the tab will go through Xuntouched. This makes it especially useful for filtering the output of Xthe X.IR dbm (1) X.B parse Xfunction when producing a domain name server table. X.SH EXAMPLE X.nf X.ta \w'majestix.liu.se'u+5n X% cat >foo Xmajestix.liu.se majestix.liu.se Xobelix.liu.se obelix.liu.se Xobelix.\s-1UUCP\s+1 obelix.liu.se Xaida.uu.se aida.uu.se Xmc.lcs.mit.edu mc.lcs.mit.edu Xmit-mc mc.lcs.mit.edu X^D X% mkdomext liu.se \s-1UUCP\s+1 <foo >bar X% cat bar Xmajestix majestix.liu.se Xmajestix.liu majestix.liu.se Xmajestix.liu.se majestix.liu.se Xobelix obelix.liu.se Xobelix.liu obelix.liu.se Xobelix.liu.se obelix.liu.se Xobelix obelix.liu.se Xobelix.\s-1UUCP\s+1 obelix.liu.se Xaida.uu aida.uu.se Xaida.uu.se aida.uu.se Xmc.lcs.mit.edu mc.lcs.mit.edu Xmit-mc mc.lcs.mit.edu X.SH AUTHOR X.nf XLennart Lovstrand <lel@ida.liu.se> XCIS Dept, Univ of Linkoping, Sweden X.fi X.SH "SEE ALSO" X.IR dbm (1) X.br XRFC822\-Standard for the Format of ARPA Internet Text Messages X(section 6.2.2) END_OF_ida/doc/mkdomext.1 if test 1613 -ne `wc -c <ida/doc/mkdomext.1`; then echo shar: \"ida/doc/mkdomext.1\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/doc/xalparse.8 -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/doc/xalparse.8\" else echo shar: Extracting \"ida/doc/xalparse.8\" $1604 characters$ sed "s/^X//" >ida/doc/xalparse.8 <<'END_OF_ida/doc/xalparse.8' X.TH XALPARSE 8 "24 April 1987" \" -*- nroff -*- X.SH NAME Xxalparse \- parse an extended aliases file X.SH SYNOPSIS X.B xalparse X.I xaliases aliases generics X.SH DESCRIPTION XThe X.I xalparse Xprogram parses an extended aliases file and produceces an ordinary Xaliases file together with a file with generic address translations. X.PP XThe format of the xaliases file is a superset of X.IR aliases (5): X.RS Xalias, alias, \|.\|.\|.\|: prefix address, prefix address, \|.\|.\|.\| X.RE XIt differes by allowing more than one LHS alias and by adding an Xoptional X.I prefix Xin front of each RHS address. The X.I prefix Xmarks the address as either inbound or outbound according to the Xfollowing table: X.RS X.nf X.ta \w'(\fIno mark\fP)'u+5n X(\fIno mark\fP) Inbound X< Outbound X> Inbound X<> Both Inbound and Outbound X.fi X.RE X.PP XInbound aliasing is the normal function implemented by X.IR aliases (5). XAll inbound entries are therefore simply copied to the X.I aliases Xoutput file. Outbound addresses are written to the X.I generics Xfile in a format suitable for parsing by X.I dbm (1). XEach line will consist of the first LHS X.I alias Xof the entry followed by the outbound addresses separated with spaces. XThe X.I generics Xfile is then normally loaded into a X.IR dbm (3) Xdatabase that is read by X.IR sendmail (8) Xand used to substitute header sender addresses with the aliased name. X.SH AUTHOR X.nf XLennart Lovstrand <lel@ida.liu.se> XCIS Dept, Univ of Linkoping, Sweden X.fi X.SH "SEE ALSO" X.IR dbm (1), X.IR aliases (5), X.IR sendmail (8) X.br XElectronic Mail Addressing in Theory and Practice with The IDA Sendmail XEnchancement Kit. END_OF_ida/doc/xalparse.8 if test 1604 -ne `wc -c <ida/doc/xalparse.8`; then echo shar: \"ida/doc/xalparse.8\" unpacked with wrong size! fi # end of overwriting check fi if test ! -d ida/lib ; then echo shar: Creating directory \"ida/lib\" mkdir ida/lib fi if test -f ida/lib/Makefile -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/lib/Makefile\" else echo shar: Extracting \"ida/lib/Makefile\" $1974 characters$ sed "s/^X//" >ida/lib/Makefile <<'END_OF_ida/lib/Makefile' X# X# MAKEFILE -- Library Files. X# Copyright (c) 1987, 1988 Lennart Lovstrand X# CIS Dept, Univ of Linkoping, Sweden X# X# Use it, abuse it, but don't sell it. X# X# EuroPARC version without DECnet. X# Remove those files from TABLES that you aren't using. X X XLOCALDOMAINS= EuroPARC.Xerox.COM UUCP # only if domaintable is used XPATHFLAGS= -C25 -i -lEuroNet XSENDMAIL= /usr/lib/sendmail XSKILL= /usr/local/bin/skill # not required XTABLES= $(YP)domaintable$(DBMDIREXT) $(YP)generics$(DBMDIREXT) \ X $(YP)pathtable$(DBMDIREXT) $(YP)aliases$(DBMDIREXT) X# mailertable$(DBMDIREXT) uucp/xtable$(DBMDIREXT) XUUCPNODES= /usr/lib/uucp/L.sys X# Prefix for YP dbm files; remove this if you won't be using YP databases XYP= /etc/yp/europarc/mail. X X X# The following definitions are inserted by ../Makefile X# Change them there--not here! XDBMDIREXT= .dir XDBMPAGEXT= .pag X X X# Update all dbm tables Xall: $(TABLES) X Xaliases generics: xaliases X xalparse xaliases aliases generics X X$(YP)aliases$(DBMDIREXT): aliases newaliases.cf $(YP)domaintable$(DBMDIREXT) X $(SENDMAIL) -Cnewaliases.cf -bi X if [ -n "$(YP)" ]; then \ X mv aliases.dir $(YP)aliases.dir; \ X mv aliases.pag $(YP)aliases.pag; \ X fi X X$(YP)generics$(DBMDIREXT): generics X dbm -L make generics $(YP)generics X X$(YP)domaintable$(DBMDIREXT): domaintable X if [ -n "$(LOCALDOMAINS)" ]; then \ X dbm parse domaintable | mkdomext $(LOCALDOMAINS) |\ X dbm -IL load $(YP)domaintable; \ X else \ X dbm parse domaintable | dbm -IL load $(YP)domaintable; \ X fi X X$(YP)pathtable$(DBMDIREXT): pathtable X pathalias $(PATHFLAGS) pathtable | dbm load $(YP)pathtable X Xmailertable$(DBMDIREXT): mailertable X dbm -L make mailertable mailertable X Xuucp/xtable$(DBMDIREXT): uucp/xtable $(UUCPNODES) X (dbm parse uucp/xtable; \ X awk '{printf "%s.UUCP\t%s\n", $$1, $$1}' $(UUCPNODES)) | \ X dbm -IL load uucp/xtable X Xstop: X -$(SKILL) sendmail X Xrestart: stop X $(SENDMAIL) -bd -q30m X Xclean: X -rm -f \#* *~ *.dir *.pag *.map *.dat */*.dir */*.pag */*.map */*.dat END_OF_ida/lib/Makefile if test 1974 -ne `wc -c <ida/lib/Makefile`; then echo shar: \"ida/lib/Makefile\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/lib/Makefile.europarc -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/lib/Makefile.europarc\" else echo shar: Extracting \"ida/lib/Makefile.europarc\" $1974 characters$ sed "s/^X//" >ida/lib/Makefile.europarc <<'END_OF_ida/lib/Makefile.europarc' X# X# MAKEFILE -- Library Files. X# Copyright (c) 1987, 1988 Lennart Lovstrand X# CIS Dept, Univ of Linkoping, Sweden X# X# Use it, abuse it, but don't sell it. X# X# EuroPARC version without DECnet. X# Remove those files from TABLES that you aren't using. X X XLOCALDOMAINS= EuroPARC.Xerox.COM UUCP # only if domaintable is used XPATHFLAGS= -C25 -i -lEuroNet XSENDMAIL= /usr/lib/sendmail XSKILL= /usr/local/bin/skill # not required XTABLES= $(YP)domaintable$(DBMDIREXT) $(YP)generics$(DBMDIREXT) \ X $(YP)pathtable$(DBMDIREXT) $(YP)aliases$(DBMDIREXT) X# mailertable$(DBMDIREXT) uucp/xtable$(DBMDIREXT) XUUCPNODES= /usr/lib/uucp/L.sys X# Prefix for YP dbm files; remove this if you won't be using YP databases XYP= /etc/yp/europarc/mail. X X X# The following definitions are inserted by ../Makefile X# Change them there--not here! XDBMDIREXT= .dir XDBMPAGEXT= .pag X X X# Update all dbm tables Xall: $(TABLES) X Xaliases generics: xaliases X xalparse xaliases aliases generics X X$(YP)aliases$(DBMDIREXT): aliases newaliases.cf $(YP)domaintable$(DBMDIREXT) X $(SENDMAIL) -Cnewaliases.cf -bi X if [ -n "$(YP)" ]; then \ X mv aliases.dir $(YP)aliases.dir; \ X mv aliases.pag $(YP)aliases.pag; \ X fi X X$(YP)generics$(DBMDIREXT): generics X dbm -L make generics $(YP)generics X X$(YP)domaintable$(DBMDIREXT): domaintable X if [ -n "$(LOCALDOMAINS)" ]; then \ X dbm parse domaintable | mkdomext $(LOCALDOMAINS) |\ X dbm -IL load $(YP)domaintable; \ X else \ X dbm parse domaintable | dbm -IL load $(YP)domaintable; \ X fi X X$(YP)pathtable$(DBMDIREXT): pathtable X pathalias $(PATHFLAGS) pathtable | dbm load $(YP)pathtable X Xmailertable$(DBMDIREXT): mailertable X dbm -L make mailertable mailertable X Xuucp/xtable$(DBMDIREXT): uucp/xtable $(UUCPNODES) X (dbm parse uucp/xtable; \ X awk '{printf "%s.UUCP\t%s\n", $$1, $$1}' $(UUCPNODES)) | \ X dbm -IL load uucp/xtable X Xstop: X -$(SKILL) sendmail X Xrestart: stop X $(SENDMAIL) -bd -q30m X Xclean: X -rm -f \#* *~ *.dir *.pag *.map *.dat */*.dir */*.pag */*.map */*.dat END_OF_ida/lib/Makefile.europarc if test 1974 -ne `wc -c <ida/lib/Makefile.europarc`; then echo shar: \"ida/lib/Makefile.europarc\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/lib/Makefile.generic -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/lib/Makefile.generic\" else echo shar: Extracting \"ida/lib/Makefile.generic\" $1968 characters$ sed "s/^X//" >ida/lib/Makefile.generic <<'END_OF_ida/lib/Makefile.generic' X# X# MAKEFILE -- Library Files. X# Copyright (c) 1987, 1988 Lennart Lovstrand X# CIS Dept, Univ of Linkoping, Sweden X# X# Use it, abuse it, but don't sell it. X# X# Generic version without DECnet. X# Remove those files from TABLES that you aren't using. X X XLOCALDOMAINS= #ida.liu.se UUCP # only if domaintable is used XPATHFLAGS= -C25 -i #-lIDA-TCP-NET XSENDMAIL= /usr/lib/sendmail XSKILL= /usr/local/bin/skill # not required XTABLES= $(YP)domaintable$(DBMDIREXT) $(YP)generics$(DBMDIREXT) \ X $(YP)pathtable$(DBMDIREXT) $(YP)aliases$(DBMDIREXT) \ X mailertable$(DBMDIREXT) uucp/xtable$(DBMDIREXT) XUUCPNODES= /usr/lib/uucp/L.sys X# Prefix for YP dbm files; remove this if you won't be using YP databases XYP= #/etc/yp/ida/mail. X X X# The following definitions are inserted by ../Makefile X# Change them there--not here! XDBMDIREXT= .dir XDBMPAGEXT= .pag X X X# Update all dbm tables Xall: $(TABLES) X Xaliases generics: xaliases X xalparse xaliases aliases generics X X$(YP)aliases$(DBMDIREXT): aliases newaliases.cf $(YP)domaintable$(DBMDIREXT) X $(SENDMAIL) -Cnewaliases.cf -bi X if [ -n "$(YP)" ]; then \ X mv aliases.dir $(YP)aliases.dir; \ X mv aliases.pag $(YP)aliases.pag; \ X fi X X$(YP)generics$(DBMDIREXT): generics X dbm -L make generics $(YP)generics X X$(YP)domaintable$(DBMDIREXT): domaintable X if [ -n "$(LOCALDOMAINS)" ]; then \ X dbm parse domaintable | mkdomext $(LOCALDOMAINS) |\ X dbm -IL load $(YP)domaintable; \ X else \ X dbm parse domaintable | dbm -IL load $(YP)domaintable; \ X fi X X$(YP)pathtable$(DBMDIREXT): pathtable X pathalias $(PATHFLAGS) pathtable | dbm load $(YP)pathtable X Xmailertable$(DBMDIREXT): mailertable X dbm -L make mailertable mailertable X Xuucp/xtable$(DBMDIREXT): uucp/xtable $(UUCPNODES) X (dbm parse uucp/xtable; \ X awk '{printf "%s.UUCP\t%s\n", $$1, $$1}' $(UUCPNODES)) | \ X dbm -IL load uucp/xtable X Xstop: X -$(SKILL) sendmail X Xrestart: stop X $(SENDMAIL) -bd -q30m X Xclean: X -rm -f \#* *~ *.dir *.pag *.map *.dat */*.dir */*.pag */*.map */*.dat END_OF_ida/lib/Makefile.generic if test 1968 -ne `wc -c <ida/lib/Makefile.generic`; then echo shar: \"ida/lib/Makefile.generic\" unpacked with wrong size! fi # end of overwriting check fi if test ! -d ida/lib/decnet ; then echo shar: Creating directory \"ida/lib/decnet\" mkdir ida/lib/decnet fi if test -f ida/lib/decnet/nodes -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/lib/decnet/nodes\" else echo shar: Extracting \"ida/lib/decnet/nodes\" $1248 characters$ sed "s/^X//" >ida/lib/decnet/nodes <<'END_OF_ida/lib/decnet/nodes' Xliuida Xlisbet Xlaura Xbill Xbull Xtrisse Xfrasse Xmurre Xfille Xbilbo Xfrodo Xelrond Xgollum Xolds Xchevy Xkafka Xrolls Xniva Xvaz Xlinnea Xlinus Xlina Xelinor Xp13l00 Xviktor Xludvig Xhazel Xbigwig Xkloker Xtoker Xclover Xfiver Xdaisy Xaladin Xturtle Xminmin Xjinjin Xweiwei Xfelix Xflinta Xflisa Xfrida Xfilip Xfilipb Xfenix Xfrank Xdec Xrtr13a Xmoll Xdur Xnfr Xelin Xelsy Xelmer Xromeo Xvaxkab Xkleo Xklas Xkicki Xvera Xkaron Xpallas Xfreja Xelvira Xsi Xrtr08a Xidun Xbrage Xbackus Xnoatun Xnjord Xskade Xgotl Xmeta Xpara Xthermo Xhelios Xoseen Xksab Xkthttt Xevild Xelinda Xelise Xella Xelton Xelena Xelke Xelsa Xeliza Xornen Xknoen Xffacom Xafivax Xa08001 Xplasma Xplasm1 Xvanb Xvana Xmcg Xvanc Xbasun Xpsypdp Xpsyvax Xutb1 Xutb2 Xbiovax Xostvax Xtpsyk Xargus Xrtm Xostpdp Xlvax Xmanwe Xskogis Xfjarr Xrtr09a Xmalin Xtekla Xcartus Xpelle Xpictor Xtlu Xmax Xkvax1 Xkvax2 Xsigurd Xescil Xgwax1 Xgwax2 Xkemist Xcell Xminc Xsilver Xlapse Xmaja Xrtr18a Ximunis Xxray Xgraph Ximmuna Xbmc1 Xfarfar Xeva Xnimbus Xlaban Xpax Xtersx Xapele1 Xtekn01 Xinfth1 Xtherm1 Xorgch1 Xfyvax1 Xfyvax2 Xelsys Xcontrl Xmeddat Xsostel Xfyvax3 Xcthmga Xrtr31a Xinfth2 Xinfth3 Xinfth4 Xkstad Xlnkarl Xedbild Xsmtgbg Xgotmed Xvega Xkcvax Xsirius Xgemini Xadam Xcastor Xpollux Xrigel Xpandor Xikaros Xjanus Xperdix Xpan Xshanno Xbutter Xerlang Xpluto Xagaton Xbode Xemma Xshiva Xegino Xsamson Xtyche Xgarbo Xalice Xmira Xp46xje Xp46ldc Xrtr46a Xp46ibm Xp46vm1 Xvaxi Xvaxii END_OF_ida/lib/decnet/nodes if test 1248 -ne `wc -c <ida/lib/decnet/nodes`; then echo shar: \"ida/lib/decnet/nodes\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/lib/decnet/xtable -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/lib/decnet/xtable\" else echo shar: Extracting \"ida/lib/decnet/xtable\" $1613 characters$ sed "s/^X//" >ida/lib/decnet/xtable <<'END_OF_ida/lib/decnet/xtable' X# X# DECnet domain translation table v1.0 X# Last edited by lel@ida.liu.se Mon Apr 20 21:42:58 MET DST 1987 X# X# This file contiains the official domain name for nodes X# either on the locally connected DECnet or on the national X# SUNET. X# X# Each line should contain the node's name within the DECnet X# followed by it's full official domain name. The domain name X# may be followed by other names by which the node should be X# recognized, eg. when nodes are present in multiple domains. X# X# Nodes not represented here but present in the decnet/nodes file X# are assumed to be contained in the SUNET.SE domain. X# X Xagaton agaton.lu.se Xaida aida.uu.se Xaladin aladin.liu.se Xbmc1 bmc1.uu.se Xcarmen carmen.uu.se Xcartus cartus.uu.se Xcell cell.uu.se Xclover clover.liu.se Xdaisy daisy.liu.se Xelinor elinor.liu.se Xescil escil.uu.se Xeva eva.uu.se Xfarfar farfar.uu.se Xfreja freja.qz.se Xgraph graph.uu.se Xgwax1 gwax1.uu.se Xgwax2 gwax2.uu.se Xhazel hazel.liu.se Ximmuna immuna.uu.se Ximunis imunis.uu.se Xjinjin jinjin.liu.se Xkemist kemist.uu.se Xkvax1 kvax1.uu.se Xkvax2 kvax2.uu.se Xlaban laban.uu.se Xlapse lapse.uu.se Xlina lina.liu.se Xlinnea linnea.liu.se Xlinus linus.liu.se Xlisbet lisbet.liu.se Xludvig ludvig.liu.se Xmaja maja.uu.se Xmalin malin.uu.se Xmax max.uu.se Xminc minc.uu.se Xminmin minmin.liu.se Xnimbus nimbus.uu.se Xp13l00 p13l00.liu.se Xpandor pandor.lu.se Xpax pax.uu.se Xpelle pelle.uu.se Xpictor pictor.uu.se Xrtr18a rtr18a.uu.se Xsigurd sigurd.uu.se Xsilver silver.uu.se Xtekla tekla.uu.se Xtlu tlu.uu.se Xturtle turtle.liu.se Xviktor viktor.liu.se Xweiwei weiwei.liu.se Xxray xray.uu.se END_OF_ida/lib/decnet/xtable if test 1613 -ne `wc -c <ida/lib/decnet/xtable`; then echo shar: \"ida/lib/decnet/xtable\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/lib/mailertable -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/lib/mailertable\" else echo shar: Extracting \"ida/lib/mailertable\" $650 characters$ sed "s/^X//" >ida/lib/mailertable <<'END_OF_ida/lib/mailertable' X# X# Mailer table for physical node majestix.liu.se X# (aka the UUCP node liuida) X# X# Format is <mailer>:<hostname> <official-name-1> ... <official-name-n> X# where mail sent to users on each of the <official-names> will X# be forced to invoke the specified mailer and sent to the X# specified host, which should be in a format that the mailer will X# understand. X XUUCP:alp alp.UUCP alp.se XUUCP:liutde liutde.UUCP liutde.se tde.liu.se XUUCP:prosys prosys.UUCP prosys.se XUUCP-A:enea enea.UUCP enea.se XUUCP-A:erilin erilin.UUCP erilin.se erilin.ericsson.se XUUCP-A:erix erix.UUCP erix.se erix.ericsson.se XUUCP-A:rainier rainier.UUCP rainier.se rainier.liu.se END_OF_ida/lib/mailertable if test 650 -ne `wc -c <ida/lib/mailertable`; then echo shar: \"ida/lib/mailertable\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/lib/restart_clients -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/lib/restart_clients\" else echo shar: Extracting \"ida/lib/restart_clients\" $202 characters$ sed "s/^X//" >ida/lib/restart_clients <<'END_OF_ida/lib/restart_clients' X#!/bin/sh X# restart sendmail on all clients X# X Xfor h in crabbofix lillefix miraculix portofix prefix senilix smidefix tragicomix; do X echo -n "$h " X rsh $h -n "(cd /usr/lib/mail; make restart)" Xdone END_OF_ida/lib/restart_clients if test 202 -ne `wc -c <ida/lib/restart_clients`; then echo shar: \"ida/lib/restart_clients\" unpacked with wrong size! fi chmod +x ida/lib/restart_clients # end of overwriting check fi if test -f ida/lib/sendmail.hf -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/lib/sendmail.hf\" else echo shar: Extracting \"ida/lib/sendmail.hf\" $1858 characters$ sed "s/^X//" >ida/lib/sendmail.hf <<'END_OF_ida/lib/sendmail.hf' X@(#) sendmail.hf 4.2 6/7/85 Xcpyr Xcpyr Sendmail Xcpyr Copyright (c) 1983 Eric P. Allman Xcpyr Berkeley, California Xcpyr Xcpyr Copyright (c) 1983 Regents of the University of California. Xcpyr All rights reserved. The Berkeley software License Agreement Xcpyr specifies the terms and conditions for redistribution. Xcpyr Xcpyr @(#)sendmail.hf 4.2 (Berkeley) 6/7/85 Xcpyr Xsmtp Commands: Xsmtp HELO MAIL RCPT DATA RSET Xsmtp NOOP QUIT HELP VRFY EXPN Xsmtp For more info use "HELP <topic>". Xsmtp To report bugs in the implementation contact eric@Berkeley.ARPA Xsmtp or eric@UCB-ARPA.ARPA. Xsmtp For local information contact postmaster at this site. Xhelp HELP [ <topic> ] Xhelp The HELP command gives help info. Xhelo HELO <hostname> Xhelo Introduce yourself. I am a boor, so I really don't Xhelo care if you do. Xmail MAIL FROM: <sender> Xmail Specifies the sender. Xrcpt RCPT TO: <recipient> Xrcpt Specifies the recipient. Can be used any number of times. Xdata DATA Xdata Following text is collected as the message. Xdata End with a single dot. Xrset RSET Xrset Resets the system. Xquit QUIT Xquit Exit sendmail (SMTP). Xvrfy VRFY <recipient> Xvrfy Not implemented to protocol. Gives some sexy Xvrfy information. Xexpn EXPN <recipient> Xexpn Same as VRFY in this implementation. Xnoop NOOP Xnoop Do nothing. Xsend SEND FROM: <sender> Xsend replaces the MAIL command, and can be used to send Xsend directly to a users terminal. Not supported in this Xsend implementation. Xsoml SOML FROM: <sender> Xsoml Send or mail. If the user is logged in, send directly, Xsoml otherwise mail. Not supported in this implementation. Xsaml SAML FROM: <sender> Xsaml Send and mail. Send directly to the user's terminal, Xsaml and also mail a letter. Not supported in this Xsaml implementation. Xturn TURN Xturn Reverses the direction of the connection. Not currently Xturn implemented. END_OF_ida/lib/sendmail.hf if test 1858 -ne `wc -c <ida/lib/sendmail.hf`; then echo shar: \"ida/lib/sendmail.hf\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/lib/sendmail.st -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/lib/sendmail.st\" else echo shar: Extracting \"ida/lib/sendmail.st\" $0 character$ sed "s/^X//" >ida/lib/sendmail.st <<'END_OF_ida/lib/sendmail.st' END_OF_ida/lib/sendmail.st if test 0 -ne `wc -c <ida/lib/sendmail.st`; then echo shar: \"ida/lib/sendmail.st\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/lib/stop_clients -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/lib/stop_clients\" else echo shar: Extracting \"ida/lib/stop_clients\" $196 characters$ sed "s/^X//" >ida/lib/stop_clients <<'END_OF_ida/lib/stop_clients' X#!/bin/sh X# stop sendmail on all clients X# X Xfor h in crabbofix lillefix miraculix portofix prefix senilix smidefix tragicomix; do X echo -n "$h " X rsh $h -n "(cd /usr/lib/mail; make stop)" Xdone END_OF_ida/lib/stop_clients if test 196 -ne `wc -c <ida/lib/stop_clients`; then echo shar: \"ida/lib/stop_clients\" unpacked with wrong size! fi chmod +x ida/lib/stop_clients # end of overwriting check fi if test ! -d ida/lib/uucp ; then echo shar: Creating directory \"ida/lib/uucp\" mkdir ida/lib/uucp fi if test -f ida/lib/uucp/relays -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/lib/uucp/relays\" else echo shar: Extracting \"ida/lib/uucp/relays\" $548 characters$ sed "s/^X//" >ida/lib/uucp/relays <<'END_OF_ida/lib/uucp/relays' Xakgua.UUCP Xalberta.UUCP Xbellcore.UUCP Xburl.UUCP Xcbosgd.UUCP Xcernvax.UUCP Xclyde.UUCP Xcmcl2.UUCP Xcuae2.UUCP Xdecvax.UUCP Xdecwrl.UUCP Xdiku.UUCP Xdrillsys.UUCP Xenea.UUCP Xenea.se Xgatech.UUCP Xglacier.UUCP Xhao.UUCP Xhplabs.UUCP Xi2unix.UUCP Xihnp4.UUCP Xinria.UUCP Xkddlab.UUCP Xlll-crg.UUCP Xlll-lcc.UUCP Xmcnc.UUCP Xmcvax.UUCP Xmcvax.cwi.nl Xmunnari.UUCP Xoliveb.UUCP Xpenet.UUCP Xphilabs.UUCP Xprlb2.UUCP Xqantel.UUCP Xsdcrdcf.UUCP Xsdcsvax.UUCP Xseismo.UUCP Xtektronix.UUCP Xubc-vision.UUCP Xukc.UUCP Xulysses.UUCP Xunido.UUCP Xutzoo.UUCP Xuw-beaver.UUCP Xvmars.UUCP Xwatmath.UUCP END_OF_ida/lib/uucp/relays if test 548 -ne `wc -c <ida/lib/uucp/relays`; then echo shar: \"ida/lib/uucp/relays\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/lib/uucp/xtable -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/lib/uucp/xtable\" else echo shar: Extracting \"ida/lib/uucp/xtable\" $672 characters$ sed "s/^X//" >ida/lib/uucp/xtable <<'END_OF_ida/lib/uucp/xtable' X# X# Translation table between domain addresses and X# flat-spaced UUCP node names. X# X# This table is used when formatting addresses for X# delivery overold-fashioned UUCP links. Batched SMTP X# over UUCP does not use this table, since it is assumed X# that (B)SMTP nodes already know about domain names. X# X# It is never necessary to enter a translation from "foo.UUCP" X# to "foo", since that already (automatically) is done by X# ruleset 14. X# X Xalp alp.se Xemil emil.uu.se Xenea enea.se Xerilin erilin.ericsson.se Xerix erix.ericsson.se Xkuling kuling.uu.se Xliuida ida.liu.se Xliutde tde.liu.se Xmcvax mcvax.cwi.nl Xnumax numax.uu.se Xobelix obelix.liu.se Xprosys prosys.se END_OF_ida/lib/uucp/xtable if test 672 -ne `wc -c <ida/lib/uucp/xtable`; then echo shar: \"ida/lib/uucp/xtable\" unpacked with wrong size! fi # end of overwriting check fi if test ! -d ida/patches ; then echo shar: Creating directory \"ida/patches\" mkdir ida/patches fi if test -f ida/patches/MDBM.edit -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/patches/MDBM.edit\" else echo shar: Extracting \"ida/patches/MDBM.edit\" $171 characters$ sed "s/^X//" >ida/patches/MDBM.edit <<'END_OF_ida/patches/MDBM.edit' X: MDBM.edit SRCDIR DBMLIB Xcd $1 Xchmod u+w Makefile Xecho ">>> Editing $1/Makefile to enable MDBM..." X/bin/ed Makefile <<EOF Xg/^LIBS=/s/-ldbm/$2/ Xw Xq XEOF Xchmod u-w Makefile END_OF_ida/patches/MDBM.edit if test 171 -ne `wc -c <ida/patches/MDBM.edit`; then echo shar: \"ida/patches/MDBM.edit\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/patches/Makefile -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/patches/Makefile\" else echo shar: Extracting \"ida/patches/Makefile\" $1119 characters$ sed "s/^X//" >ida/patches/Makefile <<'END_OF_ida/patches/Makefile' X# X# MAKEFILE -- Sendmail Patches. X# Copyright (c) 1987 Lennart Lovstrand X# CIS Dept, Univ of Linkoping, Sweden X# X# Use it, abuse it, but don't sell it. X# X XSRCDIFFS= Makefile.diff Version.c.diff alias.c.diff \ X arpadate.c.diff conf.c.diff conf.h.diff daemon.c.diff \ X deliver.c.diff domain.c.diff headers.c.diff macro.c.diff \ X main.c.diff parseaddr.c.diff queue.c.diff readcf.c.diff \ X recipient.c.diff savemail.c.diff sendmail.h.diff \ X srvrsmtp.c.diff usersmtp.c.diff util.c.diff XDOCDIFFS= op.me.diff X X X# The following definitions are inserted by ../Makefile X# Change them there--not here! XMDBM= XDBMLIB= -ldbm XSRCDIR= ../../src XDOCDIR= ../../doc X Xpatch: X for f in $(SRCDIFFS); do \ X patch $(SRCDIR)/`basename $$f .diff` $$f; \ X done X for f in $(DOCDIFFS); do \ X patch $(DOCDIR)/`basename $$f .diff` $$f; \ X done X -if [ -n "$(MDBM)" ]; then \ X cp mdbm_compat.h $(SRCDIR); \ X patch -d $(SRCDIR) -b .old < MDBM.diffs; \ X sh MDBM.edit $(SRCDIR) $(DBMLIB); \ X fi X Xbackup: X tar cvf Backup.tar $(SRCDIR)/*.[hc] $(DOCDIR)/op.me X Xrestore: X tar xvf Backup.tar X Xclean: X -rm -f \#* *~ Backup.tar END_OF_ida/patches/Makefile if test 1119 -ne `wc -c <ida/patches/Makefile`; then echo shar: \"ida/patches/Makefile\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/patches/Makefile.diff -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/patches/Makefile.diff\" else echo shar: Extracting \"ida/patches/Makefile.diff\" $1221 characters$ sed "s/^X//" >ida/patches/Makefile.diff <<'END_OF_ida/patches/Makefile.diff' X*** Makefile.orig Sat Aug 20 05:10:52 1988 X--- Makefile Sun Sep 25 18:16:07 1988 X*************** X*** 22,27 **** X--- 22,28 ---- X X CFLAGS= -O -I. -I../include -DVMUNIX -DMXDOMAIN X ASMSED= ../include/asm.sed X+ LIBS= -ldbm -lresolv X X GET= sccs get X DELTA= sccs delta X*************** X*** 29,44 **** X PRT= sccs prt X X .c.o: X! cc -S ${CFLAGS} $*.c X! sed -f ${ASMSED} $*.s | as -o $*.o X! rm -f $*.s X X! sendmail: ${OBJS} Version.o X! ${CC} ${COPTS} -o $@ Version.o ${OBJS} -ldbm X! size sendmail; ls -l sendmail; ${WHAT} < Version.o X! X! dsendmail: ${OBJS} Version.o X! ${CC} ${COPTS} -o sendmail Version.o ${OBJS} -ldbm -lresolv X size sendmail; ls -l sendmail; ${WHAT} < Version.o X X install: X--- 30,46 ---- X PRT= sccs prt X X .c.o: X! cc -c ${CFLAGS} $*.c X! # cc -S ${CFLAGS} $*.c X! # sed -f ${ASMSED} $*.s | as -o $*.o X! # rm -f $*.s X X! # The date sendmail was compiled is written to the X! # freeze file, to avoid reading in a .fc file created X! # by a different version. X! sendmail: $(OBJS) Version.o X! echo 'char datecompiled[] = "' `date` '";' >datecompiled.c X! $(CC) $(COPTS) -o sendmail Version.o datecompiled.c $(OBJS) $(LIBS) X size sendmail; ls -l sendmail; ${WHAT} < Version.o X X install: END_OF_ida/patches/Makefile.diff if test 1221 -ne `wc -c <ida/patches/Makefile.diff`; then echo shar: \"ida/patches/Makefile.diff\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/patches/Version.c.diff -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/patches/Version.c.diff\" else echo shar: Extracting \"ida/patches/Version.c.diff\" $419 characters$ sed "s/^X//" >ida/patches/Version.c.diff <<'END_OF_ida/patches/Version.c.diff' X*** Version.c.orig Mon Mar 14 04:02:40 1988 X--- Version.c Mon Aug 1 15:09:46 1988 X*************** X*** 18,24 **** X static char sccsid[] = "@(#)version.c 5.59 (Berkeley) 3/13/88"; X #endif /* not lint */ X X! char Version[] = "5.59"; X X # ifdef COMMENT X X--- 18,24 ---- X static char sccsid[] = "@(#)version.c 5.59 (Berkeley) 3/13/88"; X #endif /* not lint */ X X! char Version[] = "5.59++"; X X # ifdef COMMENT X END_OF_ida/patches/Version.c.diff if test 419 -ne `wc -c <ida/patches/Version.c.diff`; then echo shar: \"ida/patches/Version.c.diff\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/patches/arpadate.c.diff -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/patches/arpadate.c.diff\" else echo shar: Extracting \"ida/patches/arpadate.c.diff\" $407 characters$ sed "s/^X//" >ida/patches/arpadate.c.diff <<'END_OF_ida/patches/arpadate.c.diff' X*** arpadate.c.orig Sat Apr 2 01:51:03 1988 X--- arpadate.c Mon Aug 1 19:33:25 1988 X*************** X*** 139,145 **** X--- 139,149 ---- X else X p = tzname[0]; X # else X+ #ifndef sun X p = localtime(&t.time)->tm_zone; X+ #else X+ p = (char *)timezone(t.timezone, localtime(&t.time)->tm_isdst); X+ #endif X # endif USG X if ((strncmp(p, "GMT", 3) == 0 || strncmp(p, "gmt", 3) == 0) && X p[3] != '\0') END_OF_ida/patches/arpadate.c.diff if test 407 -ne `wc -c <ida/patches/arpadate.c.diff`; then echo shar: \"ida/patches/arpadate.c.diff\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/patches/conf.c.diff -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/patches/conf.c.diff\" else echo shar: Extracting \"ida/patches/conf.c.diff\" $714 characters$ sed "s/^X//" >ida/patches/conf.c.diff <<'END_OF_ida/patches/conf.c.diff' X*** conf.c.orig Sat Apr 2 01:51:04 1988 X--- conf.c Fri Aug 26 01:33:56 1988 X*************** X*** 81,86 **** X--- 81,87 ---- X "resent-cc", H_RCPT|H_RESENT, X "bcc", H_RCPT|H_ACHECK, X "resent-bcc", H_RCPT|H_ACHECK|H_RESENT, X+ "apparently-to", H_RCPT, X /* message identification and control */ X "message-id", 0, X "resent-message-id", H_RESENT, X*************** X*** 142,147 **** X--- 143,150 ---- X X setdefaults() X { X+ int c; X+ X QueueLA = 8; X QueueFactor = 10000; X RefuseLA = 12; X*************** X*** 152,157 **** X--- 155,165 ---- X FileMode = 0644; X DefUid = 1; X DefGid = 1; X+ X+ # ifdef NDBM X+ for (c = 0; c < 128; c++) X+ DbmTab[c].db_dbm = DB_NOTYETOPEN; X+ # endif NDBM X } X X /* END_OF_ida/patches/conf.c.diff if test 714 -ne `wc -c <ida/patches/conf.c.diff`; then echo shar: \"ida/patches/conf.c.diff\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/patches/conf.h.diff -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/patches/conf.h.diff\" else echo shar: Extracting \"ida/patches/conf.h.diff\" $811 characters$ sed "s/^X//" >ida/patches/conf.h.diff <<'END_OF_ida/patches/conf.h.diff' X*** conf.h.orig Sat Apr 2 01:21:19 1988 X--- conf.h Fri Aug 26 18:24:13 1988 X*************** X*** 48,53 **** X--- 48,54 ---- X X # define DBM 1 /* use DBM library (requires -ldbm) */ X # define NDBM 1 /* new DBM library available (requires DBM) */ X+ # define YP 1 /* enable Yellow Pages code */ X # define DEBUG 1 /* enable debugging */ X # define LOG 1 /* enable logging */ X # define SMTP 1 /* enable user and server SMTP */ X*************** X*** 56,58 **** X--- 57,66 ---- X # define DAEMON 1 /* include the daemon (requires IPC & SMTP) */ X # define SETPROCTITLE 1 /* munge argv to display current status */ X /* # define WIZ 1 /* allow wizard mode */ X+ X+ /* X+ ** This was neither defined under SunOS 3.5 nor my test BSD4.3 machine. X+ */ X+ #ifndef EX_CONFIG X+ # define EX_CONFIG 78 X+ #endif EX_CONFIG END_OF_ida/patches/conf.h.diff if test 811 -ne `wc -c <ida/patches/conf.h.diff`; then echo shar: \"ida/patches/conf.h.diff\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/patches/domain.c.diff -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/patches/domain.c.diff\" else echo shar: Extracting \"ida/patches/domain.c.diff\" $1082 characters$ sed "s/^X//" >ida/patches/domain.c.diff <<'END_OF_ida/patches/domain.c.diff' X*** domain.c.orig Wed May 4 01:13:44 1988 X--- domain.c Thu Aug 25 10:26:46 1988 X*************** X*** 147,152 **** X--- 147,169 ---- X return(nmx); X } X X+ /* X+ ** Getcanonname() below is broken in the sense that it won't return X+ ** unqualified local host names with their full domain extension, X+ ** unless the argument is an alias. X+ ** X+ ** Since gethostbyname() calls the name server with bind 4.8, X+ ** I don't see why this function would be needed at all. I've X+ ** therefore restored the old code in maphostname() of daemon.c X+ ** that uses gethostbyname(). If there's something I've missed, X+ ** feel free to change maphostname() to again call getcanonname(), X+ ** but also make sure that the latter will qualify the host with X+ ** its full domain AND return a status code indicating if the host X+ ** was found. X+ ** X+ ** Lennart Lovstrand, Rank Xerox EuroPARC, 24-Aug-88 X+ */ X+ #ifdef GETHOSTBYNAME_ISNT_ENOUGH X getcanonname(host, hbsize) X char *host; X int hbsize; X*************** X*** 224,226 **** X--- 241,244 ---- X } X } X } X+ #endif GETHOSTBYNAME_ISNT_ENOUGH END_OF_ida/patches/domain.c.diff if test 1082 -ne `wc -c <ida/patches/domain.c.diff`; then echo shar: \"ida/patches/domain.c.diff\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/patches/headers.c.diff -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/patches/headers.c.diff\" else echo shar: Extracting \"ida/patches/headers.c.diff\" $503 characters$ sed "s/^X//" >ida/patches/headers.c.diff <<'END_OF_ida/patches/headers.c.diff' X*** headers.c.orig Mon Mar 14 05:31:51 1988 X--- headers.c Mon Aug 1 15:07:23 1988 X*************** X*** 782,788 **** X *p = '\0'; X X /* translate the name to be relative */ X! name = remotename(name, m, bitset(H_FROM, h->h_flags), FALSE); X if (*name == '\0') X { X *p = savechar; X--- 782,789 ---- X *p = '\0'; X X /* translate the name to be relative */ X! name = remotename(name, m, bitset(H_FROM, h->h_flags), FALSE, X! TRUE); X if (*name == '\0') X { X *p = savechar; END_OF_ida/patches/headers.c.diff if test 503 -ne `wc -c <ida/patches/headers.c.diff`; then echo shar: \"ida/patches/headers.c.diff\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/patches/mdbm_compat.h -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/patches/mdbm_compat.h\" else echo shar: Extracting \"ida/patches/mdbm_compat.h\" $899 characters$ sed "s/^X//" >ida/patches/mdbm_compat.h <<'END_OF_ida/patches/mdbm_compat.h' X/** X ** MDBM Compatibility File X ** X ** These definitions will make sendmail use Maryland's mdbm X ** library package instead of the new multifile database X ** routines of 4.3. X ** X ** Note: Don't use this if you already have ndbm. X **/ X X#include <mdbm.h> X Xtypedef struct mdbm DBMFILE; X X#ifndef NDBM X# define NDBM X#endif NDBM X#ifndef MDBM X# define MDBM X#endif MDBM X X/* X * Mdbm equivalents for ndbm functions X */ X X#define DB_DIREXT ".map" X#define DB_PAGEXT ".dat" X X#define DBM_REPLACE MDBM_REPLACE X#define DBM_INSERT MDBM_INSERT X X#define dbm_dirfno(db) ((db)->mdbm_mapfd) X#define dbm_pagfno(db) ((db)->mdbm_datafd) X X#define dbm_open(file, flags, mode) \ X mdbm_open(file, flags, mode, NULL, NULL, NULL) X#define dbm_close mdbm_close X#define dbm_fetch mdbm_fetch X#define dbm_store mdbm_store X#define dbm_firstkey mdbm_firstkey X#define dbm_nextkey mdbm_nextkey /* don't forget to fill in 2nd param! */ END_OF_ida/patches/mdbm_compat.h if test 899 -ne `wc -c <ida/patches/mdbm_compat.h`; then echo shar: \"ida/patches/mdbm_compat.h\" unpacked with wrong size! fi # end of overwriting check fi if test -f ida/patches/queue.c.diff -a "${1}" != "-c" ; then echo shar: Will not over-write existing file \"ida/patches/queue.c.diff\" else echo shar: Extracting \"ida/patches/queue.c.diff\" $855 characters$ sed "s/^X//" >ida/patches/queue.c.diff <<'END_OF_ida/patches/queue.c.diff' X*** queue.c.orig Mon Mar 14 03:54:04 1988 X--- queue.c Sat Aug 20 01:15:36 1988 X*************** X*** 181,187 **** X */ X X bzero((char *) &nullmailer, sizeof nullmailer); X! nullmailer.m_r_rwset = nullmailer.m_s_rwset = -1; X nullmailer.m_eol = "\n"; X X define('g', "\001f", e); X--- 181,188 ---- X */ X X bzero((char *) &nullmailer, sizeof nullmailer); X! nullmailer.m_re_rwset = nullmailer.m_se_rwset = -1; X! nullmailer.m_rh_rwset = nullmailer.m_sh_rwset = -1; X nullmailer.m_eol = "\n"; X X define('g', "\001f", e); X*************** X*** 336,342 **** X ** Make sure the alias database is open. X */ X X! initaliases(AliasFile, FALSE); X X /* X ** Start making passes through the queue. X--- 337,343 ---- X ** Make sure the alias database is open. X */ X X! initaliases(FALSE); X X /* X ** Start making passes through the queue. END_OF_ida/patches/queue.c.diff if test 855 -ne `wc -c <ida/patches/queue.c.diff`; then echo shar: \"ida/patches/queue.c.diff\" unpacked with wrong size! fi # end of overwriting check fi echo shar: End of archive 1 $of 8$. cp /dev/null ark1isdone MISSING="" for I in 1 2 3 4 5 6 7 8 ; do if test ! -f ark${I}isdone ; then MISSING="${MISSING} ${I}" fi done if test "${MISSING}" = "" ; then echo You have unpacked all 8 archives. echo "See ida/README and ida/INSTALL for further directions." rm -f ark[1-9]isdone else echo You still need to unpack the following archives: echo " " ${MISSING} fi ## End of shell archive. exit 0