0 Create a chamfer a given distance from an intersection\nChamfer (Distance and Distance)\n\n
1 Create a chamfer defined by its distance and angle\nChamfer (Distance and Angle)\n\n
2 Create a chamfer defined by its length and angle\nChamfer (Length and Angle)\n\n
3 Extend two lines to a meeting point\nMeet 2 Lines\n\n
4 Extend line to a meeting point\nT Meet Double Lines\n\n
5 Clean meeting point\nX Meet Double Lines\n\n
6 Connect two lines with a smooth arc\nFillet\n\n
100 Process the whole multiline\nMultiline\n\n
101 Delete gaps in the chosen entity\nDelete Gaps\n\n
102 Cleanup intersection\nCleanup\n\n
103 Delete CutLines in the chosen entity\nDelete CutLines\n\n
300 \nDelete Gaps
301 \nDelete Cutline
302 \nMeet Lines
400 Key in Distance A and Distance B and click on the first line/double line
401 Key in the Distance and Angle and click on the first line/double line
402 Key in the Length and Angle and click on the first line/double line
403 Click on the second line/double line
404 Click on the second line/double line
405 Click on the second line/double line
406 Select the first entity
407 Select the second entity
898 A currently selected entity has lost connections to its dimensions. We recommend deleting these dimensions and re-doing them.
899 Failed because selection contains graphics which are read only.
900 Wrong option selection.
901 Chamfer is not possible in this case.
902 Wrong selection. Try to select the second segment again or use the local menu.
903 For this case, the modification requested is not possible.
904 Cannot fillet or chamfer these two segments of the same multiline.Try to select the second segment again or use the local menu.
905 At least one of these two choosen segments of different multilines is not a start/end segment.Try to select the second segment again or use the local menu.
906 At least one of these two multilines is closed.Explode complex entities before trying to Fillet or Chamfer.
907 Cannot fillet or chamfer these two segments.Try to select the second segment again or use the local menu.
908 Radius is too small for fillet.Try again or use the local menu.
909 Cannot fillet these arcs.
910 These two segments belong to the same multiline so a Meet cannot be performed on them.
911 These two segments belong to the same multiline so a Meet cannot be performed on them.
912 These two segments belong to the same multiline so a Meet cannot be performed on them.
913 At least one of the two chosen segments of different multilines is not a start/end segment.
914 Cannot Meet these two segments.
915 Meet is not possible, try again!
916 Cannot X_Meet these two segments.
917 At least one of the two multilines is closed. Meet is not possible, try again!
