home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Beijing Paradise BBS Backup
/
PARADISE.ISO
/
software
/
BBSDOORW
/
FDTN_003.ZIP
/
C-V34.002
< prev
next >
Wrap
Text File
|
1995-02-11
|
4KB
|
88 lines
-------------------------------------------------------------------------
Filename....: FDTN-003; FrontDoor Technical Note #003
Rev.........: 002
Dated.......: 08-Jan-1995
Subject.....: Use of FrontDoor 2.12, FrontDoor 2.20c.mL and above
with USRobotics Courier and Sportster modems
Author......: Edward Hobson
2:443/59.24@fidonet
-------------------------------------------------------------------------
FDSETUP, Modem menu:
+----------------------------------------- Command strings +
| |
| Escape code +++ |
| Return on-line ~ATO| |
| Onhook ATH0| |
| Offhook ~ATM0H1| | * Note!
| Dial ATDT | ** Note!
| \-Prefix |
| \-Suffix | |
| Delay 3 |
| Init-1 AT&F1&K2M1E0H0S15=8S19=4S28=20S34=8| |
| Init-2 |
| Init-3 |
| Down ~ATM0H1| | * Note!
| Attention AT| |
| |
+----------------------------------------------------------+
* In some countries/states it is illegal to take the line off-hook for
long periods of time. In others, you are billed from the second the
line goes off-hook. If you previously configured 'Lower DTR when
busy' to 'Yes' then the 'Offhook' string will never be sent.
However, the 'Down' string is sent regardless of this setting. If
you want to ensure that the line is never busied out by the modem
going 'off-hook' then blank out both of these strings.
** If your telephone exchange cannot support MFT tone dialling, change
the 'Dial' string to read 'ATDP' (do not include quotation marks).
+----------------------------------------- Answer control +
| |
| Manual answer Yes |
| Force answer ATB0M1A| |
| Answer delay 1 |
| Enable LDFRS No |
| |
+---------------------------------------------------------+
FDSETUP, Manager menu, Modem sub-menu:
These options allow you to configure FrontDoor to send specific
commands to the modem, if it matches a particular speed, nodelist
flag, or node number with the system being called.
In the case of USRobotics Courier Dual Standard modems (those
supporting HST as well as regular ITU high speed protocols) it is
important to choose the highest supported protocol when dialling out.
Insert each of the following lines in the correct order. If your
Courier modem does not support HST as well as ITU high speed protocols
then omit this section.
HST ATB1|
V32 ATB0|
H14 ATB1|
V32B ATB0|
H16 ATB1|
V32T ATB0|
UV32T ATB0|
USRobotics modems sometimes have trouble negotiating error correction
with some Rockwell-chipset based V.FC modems. In order to fix this
problem, it is necessary to disable the V.42 detection phase, and
force a LAPM or MNP link. This is done by setting S-register to 48 or
32 respectively. If you experience such problems, add the following to
the list:
VFC ATS27=48|
V34 ATS27=48|
End of document
===============