home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Computer Panoráma
/
computer_panorama_1997-12-hibas.iso
/
SHARE
/
SOUND
/
MULTQ102.ZIP
/
Multique.exe
/
string.txt
next >
Wrap
Text File
|
1997-09-25
|
11KB
|
245 lines
213 Opens a wave editor to edit the selected audio section
300 View commands
301 View the beginning of the selected section
302 View the end of the selected track
303 View the end of the selected section
304 View the entire project
305 View 1 second of the project
306 View 10 seconds of the project
307 View 1 minute of the project
308 View 5 minutes of the project
309 View 1 hour of the project
310 Shows volume levels within sections
311 View marker's position
313 Shows waveforms or images in sections when zoomed in
314 Sets the zoom level for showing contents
316 Shows a grid and snaps dragged units to the grid
317 Sets the grid size
318 Snaps marker to nearest audio zero-crossing
500 Playback commands
501 Plays the entire project
502 Plays the part shown in the window
503 Plays the part shown in the window, starting at the marker
504 Plays the part shown in the window, stopping at the marker
505 Plays from the marker to then end
506 Stops playback
507 Combines and saves all digital audio tracks to a single file
601 Set playback device and sampling rate
603 Set folder locations for different sections
604 Register Multiquence
2000 Access help
2001 Help table of contents
2002 Help on using online Help
2009 Shows Multiquence version information
3000 Options menu
3001 Sets options for the selected section
3002 Adds a digital audio section to the track
3003 Deletes the selected section
3004 Mutes the selected section
3005 Divides the selected section at marker
3006 Trims beginning of selected section up to marker
3007 Trims end of selected section after marker
3008 Adds another copy of the selected section
3021 Adds a MIDI section to the track
3022 Adds a CD section to the track
3023 Adds a video section to the track
3024 Adds a recording section to the track
3040 Adds a flange effect to an audio section
3041 Adjusts equalization of an audio section
3042 Resets volume graph to full for selected section
3043 Adjusts the left/right balance of an audio section
3044 Adjusts the playback speed/pitch of an audio section
3051 Moves the marker to the mouse location
3052 Moves the marker to the playback position
3055 Set the position of the marker
3100 Track commands
3101 Creates a new track
3103 Adds a section to the track
3104 Deletes the entire track
3107 Insert space before the selected section
3108 Insert silence at the mouse position or before the section
10001 Silence
10002 Contents Threshold
10003 Grid Size
10004 Playback Speed
10010 &Undo %s Ctrl+Z
10011 new track
10012 delete track
10013 add section
10014 delete section
10015 move
10016 mute
10017 split
10018 length
10019 trim
10020 space
10021 track up
10022 track down
10023 speed
10100 Supported files|*.wav;*.voc;*.au;*.iff;*.aifc;*.aif;*.aiff;*.mat;*.mid;*.rmi;*.avi|Digital audio files|*.wav;*.voc;*.au;*.iff;*.aifc;*.aif;*.aiff;*.mat|MIDI files|*.mid;*.rmi|Video files|*.avi|All files|*.*|
10101 Programs|*.exe;*.com;*.bat;*.pif|All files|*.*|
10500 Length
10501 Threshold time
10502 Grid spacing
10503 Speed ratio
10580
10581 s
10582 %
10583 ms
10584 Hz
10600 Gain
10601 Center
10901 Data Error
10902 entry error.\nPlease enter numbers only.
10903 Range Error
10904 is out of range.\nValid range:
10905 entry error.\nPlease enter a floating point number.
10906 Time Format Error
10907 entry error.\nPlease separate time into hours, minutes, and seconds using colons
10908 entry error.\nOnly three numbers may follow the decimal point.
10909 entry error.\nDecimal point should only appear after seconds.
10910 entry error.\nOnly 2 numbers may appear between colons. Use a '.' after seconds when specifying milliseconds.
10911 entry error.\nA value greater than 59 is not allowed for minutes or seconds in the given format.
10912 entry error.\nToo many colons have been entered. Make sure you have a '.' instead of a ':' after seconds.
10913 entry error.\nPlease enter the time in one of these formats: HH:MM:SS.TTT, MMM:SS.TTT, or SSSSS.TTT
11000 'To' time must be later than 'From' time.
11001 The length of the recording section could not be changed. Make sure there is enough storage available on your hard drive.
11002 Could not open MIDI section. File may be missing.
11003 Could not open CD device or device is busy. Check that the CD-ROM drive is working correctly and contains an audio CD.
11004 Could not open video section. File may be missing.
11006 Could not find a CD-ROM drive.
11010 Could not determine length of CD. Check that the CD-ROM drive is working correctly and contains an audio CD.
11011 Could not determine number of tracks on CD.
11012 No audio tracks found on CD.
11013 Could not determine position of track on CD.
11020 Delete selected track and all sections?
11021 Could not open the wave file.
11022 Could not write to the wave file. Make sure there is enough storage available on your hard drive.
11023 Section not found.
11024 Could not open the file:\n
11025 File does not contain a Multiquence project.\nUse 'Track | Add ...' to add a file to a track.
11026 File is too short or corrupted.
11027 Could not read from file. File is invalid or memory is unavailable.
11028 You need a newer version of Multiquence to open this file.
11030 Could not create the file:\n
11031 Could not write to the file. Make sure there is enough storage available on your hard drive.
11040 Not enough storage to recreate recording unit!
11041 Not enough storage to undo length change!
11045 Please specify a filename.
11046 File could not be created. Make sure there is enough storage available on your hard drive.
11047 Could not create section.
11048 Cannot trim a looped section.
11049 Cannot split a looped section.
11050 Save changes to project?
11051 Section has been modified and will be re-opend from hard drive.
11052 Section has been modified and the length has changed. Use 'Options | Section' to make adjustments.
11053 Section cannot be opened and may have been deleted.
11060 No editor specified. Please use 'Options | Folder' to set the editor.
11200 Recording Options
11201 MIDI Options
11202 CD Options
11203 Video Options
11210 Delete Track
11211 Save As Wave
11212 Find Section
11213 Open
11214 Save
11215 Add Section
11216 Undo
11217 Trim
11218 Split
11219 Open editor
11601 Could not open recording file.
11602 Input source for recording could not be selected.
11603 Could not write to recording file. Make sure there is enough storage available on your hard drive.
11604 Not enough memory to create playback buffers.
11605 High resolution timer could not be created.
11606 Could not create multimedia callback window.
11607 Could not create playback thread.
11608 Could not create multimedia thread.
11609 Clipping required. Maximum output level was %2.2lf%%.
11610 System is not fast enough to process all channels/effects.
11611 Not enough memory to associate section with a device.
11612 Could not open device for this section.
11613 Device returned an ID of 0.
11614 Could not prepare media in advance. Synchronization may be affected.
11615 Could not open the device. Another section may be using the device.
11616 Device would not play this section.
11617 Not enough memory to create a recorder.
11618 Recording device is busy or is not 'full duplex'. Your sound card must support simultaneous playback and recording in 16-bit stereo.
11619 Could not reserve 16-bit stereo device for recording.
16000 Finished.
16001 A new recording file is being created.
16100 Number of channel for this file has changed.
16101 File could not be opened.
16102 Length of file has changed. Adjustments may be required.
16103 Dynamic volume points that are outside the length of the file have been truncated.
16104 Position of the last dynamic volume point has been adjusted to match the length of the file.
16106 Not enough storage to create the recording file.
16107 Input device does not exists on this system. First available device will be used instead.
16108 Input source can not be selected. First available input will be used instead.
16109 'From' value set