CP/M/CPM_CDROM.iso/simtel/archives/cpm/9001-1.txt

Text File | 1993-02-19 | 137KB | 3,753 lines

 2-Jan-90 22:19:46-MST,5376;000000000000
Mail-From: KPETERSEN created at  2-Jan-90 22:12:21
Return-Path: <[e-mail]>
Date: Tue,  2 Jan 90 22:12:21 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #1
To: [e-mail]

INFO-CPM Digest             Tue,  2 Jan 90       Volume 90 : Issue    1

Today's Topics:
                           ALGOL under CP/M
                       CLOCK/CALENDAR FOR CP/M
                      Sorry for mangled articles
                             UUCP (CP/M)
                       Vector 4 Screen Control
                            Z280/Z80 DIFF
----------------------------------------------------------------------

Date: Fri, 29 Dec 89 17:24:13 -0800
From: [e-mail] (Murphy's beta test site.)
Subject: ALGOL under CP/M
Message-ID: <[e-mail]>

;         I found in a reference book [1, pp. 273-276] an article
;    by William Woodall about an Algol68 subset compiler for CP/M
;    computers available from the CP/M user's group.  I searched...

If you're looking for a language called ALGOL/M it is in wide
distribution on many RCP/M systems such as Royal Oak, or
available in the CP/M Roundtable on GEnie.  I'm not sure of the
current address of CPMUG, but haven't had great success with
chapters when it came to getting disks through the mail.  The
best thing is to call one of the BBSes and download it direct.

Email me direct for details.

rcs

------------------------------

Date: 28 Dec 89 02:15:36 GMT
From: zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!caesar.cs.montana.edu!ogicse!littlei!omepd!mipos3!pcocd2![e-mail]  (Justin Masters ~)
Subject: CLOCK/CALENDAR FOR CP/M
Message-ID: <[e-mail]>

In article <[e-mail]> [e-mail] (Jim Lips Earl) writes:
+Try JAMECO ELECTRONICS for that clock chip.  Their catalog shows a
+MSM5832RS 18 pin Microprocessor Real Time Clock/Calendar for $2.95.
+Address:
+Jameco Electronics
+1355 Belmont, CA  94002
+[phone]
+
+I've had good luck with these guys, and recommend them highly.  They
+ship very fast.

Yeah, he brags about 'em all the time. :)

If they don't carry them (I noticed you said you tried all over the country),
you might want to find out what kind of inputs/outputs are on that chip, and
if it's easy to swap in another chip, you might want to get an MM58274 (harder
to find) or MM58174.  Jim has the '274 running his clock in his computer.
Jim, I still haven't put mine together yet...

+--
+      Jim "Lips" Earl             UUCP: ucbvax!ucdavis!csusac!mmsac!jim
+          KB6KCP              INTERNET: mmsac![e-mail]
+   =======================================================================
+                  The opinions stated herein are all mine.


-----------------------------------------------------------------------------
Fireman to homeowner:    At one point we  |     Justin Masters
 decided to fight fire with fire...       |
 basically your house burned even faster. | [e-mail]

------------------------------

Date: 27 Dec 89 03:31:10 GMT
From: cs.utexas.edu!mailrus!jarvis.csri.toronto.edu!torsqnt!tmsoft![e-mail]  (Michael A. Shiels)
Subject: Sorry for mangled articles
Message-ID: <[e-mail]>

Due to a slight configuration problem my site (masnet.uucp) which gateways
for canremote.uucp has caused a couple of articles to reappear with mangled
headers.  The problem was corrected but not before a few articles got out
of my hands. Sorry for any confusion caused.  IT HAS BEEN FIXED!!

Michael A. Shiels

------------------------------

Date: 22 Dec 89 14:38:00 GMT
From: mailrus!jarvis.csri.toronto.edu!torsqnt!tmsoft!masnet!canremote![e-mail]  (LARRY MOORE)
Subject: UUCP (CP/M)
Message-ID: <[e-mail]>

Yes, I've been using David Goodenough's CP/M UUCP package on my Morrow
Designs' MD34.  My UUCP address is: dciem!lfergus!larry.
What problems have you been having?
---
 * Via ProDoor 3.1R

------------------------------

Date: 1 Jan 90 22:39:17 GMT
From: quanta.eng.ohio-state.edu!rcgl1.eng.ohio-state.edu![e-mail]  (Curran, Jim)
Subject: Vector 4 Screen Control
Message-ID: <[e-mail]>

Hi,
    I've got a secondhand Vector Graphics Model 4 CP/M-86
machine sans owner's manual, etc.   I was hoping someone could
help me with the screen codes such as cursor movement, clear
screen, clear line, delete character, etc....  I want to configure
some software but without this info, my screen gets very messy.
Thanks in advance,
                Jim Curran
[e-mail]

------------------------------

Date: 29 Dec 89 16:30:00 GMT
From: munnari.oz.au!basser!metro!sunaus.oz!softway!peg![e-mail]
Subject: Z280/Z80 DIFF
Message-ID: <136600001@peg>

Can any body help me with Z280 proccessor I would like to know
what new reg, inst it has over a Z80 so that I can implement them
with my current Z80/cpm system that  runs as an interpreter under
DEC VAX/VMS.
    Mark Garrett

------------------------------

End of INFO-CPM Digest V90 Issue #1
***********************************
 5-Jan-90 21:20:24-MST,9164;000000000000
Return-Path: <[e-mail]>
Date: Fri,  5 Jan 90 21:15:15 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #2
To: [e-mail]

INFO-CPM Digest             Fri,  5 Jan 90       Volume 90 : Issue    2

Today's Topics:
                    CP/M for Cromemco C10 Computer
                     Cromemco TUART board wanted
        IBM bus to SCSI adaptor//IOMEGA controller transplant
                    Info-CPM subscription request
                      Info on TeleVideo TS-1603?
                              Superbrain
              WANTED: CP/M for Cromemco w/Tandon drives
                  Z80 Dissassembler in C,  RECEIVED
----------------------------------------------------------------------

Date: Wed, 03 Jan 90 16:27:02 EST
From: [e-mail]
Subject: CP/M for Cromemco C10 Computer

   As a Boston Computer Society volunteer consultant, I have again been
approached by someone who inherited an old 8-bit computer without its
operating system.  The machine is a Cromemco C10 with a pair of 5.25"
disk drives.  The new owner does have a copy of the CDOS operating
system, but he has already had trouble getting a number of CP/M programs
to work (such as debuggers, since CDOS apparently uses RST 7, the
default interrupt for most debuggers).  If anyone out there could supply
a CP/M boot disk, we would appreciate it.  (I am assuming that Cromemco
is no longer in business and that there is no way to get official
support.  If I am wrong, please inform me.)

-- Jay Sage


------------------------------

Date: 6 Jan 90 03:30:27 GMT
From: titanic.cs.wisc.edu![e-mail]  (Anthony Rich)
Subject: Cromemco TUART board wanted
Message-ID: <[e-mail]>

I'm looking for a Cromemco TUART (dual serial port) S-100 board
(working, of course!)  Let me know if you have one you'll part
with for a reasonable sum.

 -- Tony
--
-------------------------------------------------------------
Email:    [e-mail]    Phone: [phone]
US mail:  Tony Rich, 4321 Sentinel Pass, Madison, WI 53711
-------------------------------------------------------------

------------------------------

Date: 5 Jan 90 01:53:09 GMT
From: sumax!amc-gw!sigma!flash![e-mail]  (William Swan)
Subject: IBM bus to SCSI adaptor//IOMEGA controller transplant
Message-ID: <[e-mail]>

In <[e-mail]> [e-mail] (Michael Bergman) writes:
>Has anyone fooled around with IOMEGA "Bernoulli Box" drives?  I am
>wondering whether I can adapt a cheap 10 + 10 drive originally
>intended for the IBM PC to work with my Mac. [...]

I have one of the Bernoulli Box (10+10) drives for the PC. It is on my
list of things to fool around with (perhaps a hard drive for my auld
CP/M box - I actually had one running on it many years ago, somebody
else marketed the design...). The controller board in this one has every
appearance of using a SCSI interface (although the unit I hooked up to
the CP/M box years ago had a SASI interface instead).

I unfortunately have no documentation on the interface command set -
the unit has a controller board for the PC (does not seem to work on an
AT, haven't tried it with a PC yet) and associated software. Still,
given a working configuration I don't see it being that difficult to
adapt to some other system - assuming the interface from that system is
not too difficult.


--
Bill Swan      [e-mail]          Send postal address for info:
    Innocent but in prison in Washington State for 13.5 years:
    Ms. Debbie Runyan: incarcerated 01/1989, scheduled release 07/2002.
                       In now:  0 years, 11 months,  2 weeks,  1 day.

------------------------------

Date: 4 Jan 90 22:31:30 GMT
From: pacbell!sactoh0![e-mail]  (Ian R. Justman)
Subject: Info-CPM subscription request
Message-ID: <[e-mail]>

I would like to subscribe to the Info-CPM digest if possible.
--
Home:   Ian Justman   |UUCP:(1) My CP/M machine.       |"One of the few
6612 Whitsett Drive   |     (2) My host.               |die-hard CP/M
North Highlands, CA   |(1) !pacbell!sactoh0!ijsys!ianj |addicts left on this
[phone]   95660|(2) !pacbell!sactoh0!ianj       |planet"

------------------------------

Date: 3 Jan 90 20:23:29 GMT
From: usc!cs.utexas.edu!sun-barr!newstop!texsun!texbell!wuarchive!kuhub.cc.ukans.edu![e-mail]  (RICHARD KERSHENBAUM)
Subject: Info on TeleVideo TS-1603?
Message-ID: <[e-mail]>

A friend has a chance to buy a TeleVideo TS-1603 microcomputer *very* cheaply,
but neither of us knows anything about that machine.  I suggested that someone
on the net might know (as is usually the case in any situation!)...

This machine comes with CP/M-86, but is there a version of MS-DOS for it?

If not, will it run CP/M executables intended for Z80-based machines?

What sorts of software packages are available for the TS-1603?

Thanks for any help!

                --- Richard
--

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|  Richard M. Kershenbaum          Bitnet:   richard@ukanvax                  |
|  Manager, Technical Services     Internet: [e-mail]       |
|  The University of Kansas        Fax:      [phone]              |
|  Computer Center                 Phone:    [phone]                    |
|  Lawrence, Kansas 66045                                                     |
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

------------------------------

Date: 3 Jan 90 08:15:50 GMT
From: ubc-cs!alberta!ccu![e-mail]  (Dan Fandrich)
Subject: Superbrain
Message-ID: <[e-mail]>

In article <[e-mail]> [e-mail] (Jeffery Foy) writes:
>Dan, I would appreciate seeing the insert for your superbrain. Thx.
>
>    Jeff

I've mailed a copy to you.  I'd be glad to send it (the ZMP 1.5 overlay for
the Superbrain w/8251 USART) to anyone else who wants it.  One of these days
I'll have to upload it to SIMTEL-20, but for now I'm the exclusive source!
(I just hope all 30 Superbrain owners out there don't barrage me with
requests all at once! :-)


>>> Dan Fandrich

CdnNet:     [e-mail]
Compu$erve: 72365,306
FidoNet:    Dan Fandrich at 1:153/508
--
>>> Dan Fandrich

CdnNet:     [e-mail]
Compu$erve: 72365,306

------------------------------

Date: 6 Jan 90 03:16:49 GMT
From: titanic.cs.wisc.edu![e-mail]  (Anthony Rich)
Subject: WANTED: CP/M for Cromemco w/Tandon drives
Message-ID: <[e-mail]>

WANTED:  A version of CP/M that runs on a Cromemco
         and supports Tandon 8" and 5.25" floppy drives.

I can't boot my copy of CP/M.

Long ago I bought a copy of MICAH CP/M for the Cromemco configured for
PerSci 8" drives.  My PerSci drive unit died last summer, so I
replaced it with a Tandon TM828-2.  Now I can't boot my copy of MICAH
CP/M.  (MICAH also sold CP/M configured for the Tandon, but at that time
my PerSci's were working, so I got the PerSci version.)

I've tried writing to MICAH twice and gotten no response...most likely
they've moved or aren't in business anymore.  My most recent address
for MICAH is:

        Dr. Jerome Freedman
        MICro Applications and Hardware (MICAH)
        15 Princess Street
        Sausalito, CA 94965

Questions:

1.  Does anybody out there in California know if he/they still exist?

2.  Does anyone have the Tandon version of MICAH CP/M they could send
    me?  (Yes, I'm a registered owner of MICAH CP/M, for whatever THAT's
    worth these days! :^)

3.  Is any other version of CP/M for the Cromemco available that supports
    Tandon drives?  I'm not the only orphaned Cromemco owner looking for
    CP/M.  I'll pass along any info I can find to others who would like it.

4.  If anyone has just the Tandon floppy disk driver code, I might be able
    to install it myself.  (I think the source code for the PerSci drivers
    came with MICAH CP/M, along with some way to install it.  I think I
    could substitute the Tandon driver code without too much pain.)

Thanks in advance for any help you can give me.

  -- Tony

--
----------------------------------------------------------
Email:    [e-mail]
US mail:  Tony Rich
          4321 Sentinel Pass

------------------------------

Date: 4 Jan 90 21:43:35 GMT
From: umigw!mthvax.cs.miami.edu![e-mail]  (Dru Nelson)
Subject: Z80 Dissassembler in C,  RECEIVED
Message-ID: <[e-mail]>

   Short intrusion:

      I received a copy of the Z280 disassembler.  Thank you.


--
%% Dru Nelson %% Miami, FL %% Internet:  [e-mail]  %%

------------------------------

End of INFO-CPM Digest V90 Issue #2
***********************************
 8-Jan-90 17:05:53-MST,3618;000000000000
Mail-From: KPETERSEN created at  8-Jan-90 16:56:22
Return-Path: <[e-mail]>
Date: Mon,  8 Jan 90 16:56:22 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #3
To: [e-mail]

INFO-CPM Digest             Mon,  8 Jan 90       Volume 90 : Issue    3

Today's Topics:
                          3-1/2" disc drives
                           New drive needed
                    Want: Z80 Dissassembler Source
----------------------------------------------------------------------

Date: 6 Jan 90 00:36:13 GMT
From: van-bc!ubc-cs!alberta!atha![e-mail]  (Richard Loken)
Subject: 3-1/2" disc drives
Message-ID: <[e-mail]>

I recently embarked on a project to put 3-1/2" 1.44 Mbyte wafer drives in my
dear old TRS80 Model II.  I randomly purchased 3 Panasonic drives and got out
my dentist pliers and got the pinouts and some jumper info from Matsushita.

The gentleman at Matsushita says there are a myraid of variations and he has
never heard of the one I have.  It seems to set all its options with cute little
switches - but only six.  The man from Matsushita has not heard of this method
and he has not heard of half the options.  Something was said about unauthorized
importers and venders.  Two interesting options are:

    AT - PS2    (gag, yuck, my trash-80 may reject them)
    A - B

Any idea what these two do??

How do you terminate these little rice boxes?  I see not a hint of a termination
avenue.  I will install them and experiment and if I can't find a way then I
will build a tiny board ... but really there must be a way.

     *********        73
    **********        Richard Loken VE6BSV
   .      ****
  ..      ****        Athabasca University
 ....     ****        Athabasca, Alberta Canada
..........****        [e-mail]    {alberta|decwrl}!atha!tech

------------------------------

Date: Sat, 6 Jan 90 10:04 PDT
From: Steven Russell <[e-mail]>
Subject: New drive needed

My Osborne 1 has recently developed a flaky B drive.  The Osborne uses
a Siemans SS/DD drive.  What I need to know is this -- is it possible to
get a replacement drive anymore?  Who would be likely to have them?
Thanks in advance for any help.

-Steven Russell
[e-mail]


------------------------------

Date: 6 Jan 90 06:37:10 GMT
From: ubc-cs!alberta!calgary!ccu![e-mail]  (Dave Rose)
Subject: Want: Z80 Dissassembler Source
Message-ID: <[e-mail]>

In article <[e-mail]> [e-mail] (Dru Nelson) writes:
>
>   The holidays are over so I thought now would be a good time to ask.
>
>   I am in need of C source code for a z80 dissassembler.  I don't run an
>   IBM machine and can't use its simulators, debuggers, or dissassemblers.
>   So I am looking for C code.  There are dissassemblers for my machine,
>   but they cost money.
>
>   If anybody has or knows where I can get source code for such an item
>   I would be grateful.
>

Leave a message to a person with the id of


[e-mail]

He just sent me mail saying he has the c source for such a beast.


--

Dave Rose                 :          Email - [e-mail]
10 Covent Rd.             : Local (Amdahl) - [e-mail]
Winnipeg, Manitoba, Canada:

------------------------------

End of INFO-CPM Digest V90 Issue #3
***********************************
10-Jan-90 13:19:31-MST,17802;000000000000
Return-Path: <[e-mail]>
Date: Wed, 10 Jan 90 13:15:12 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #4
To: [e-mail]

INFO-CPM Digest             Wed, 10 Jan 90       Volume 90 : Issue    4

Today's Topics:
                     Atari Mouse in US available?
                 Communications Package for Kaypro 2
                         CP/M clock (2 msgs)
                    Looking for software (2 msgs)
               Patch for Z80/Z280 disassembler package
                              Questions
----------------------------------------------------------------------

Date: 21 Dec 89 12:15:43 GMT
From: snorkelwacker!spdcc!merk!alliant!linus!nixbur!nixpbe!peun11![e-mail]  (Moellers)
Subject: Atari Mouse in US available?
Message-ID: <[e-mail]>

Hi,

I have recently built an interface to connect an Atari Mouse to my
SB180FX (Steve Ciarcia's Z-System).
I would like to publish the design in Steve's "Circuit Cellar Ink", but
this would only make sense if the mouse itself was separately available
in the US (I had difficulties buying one in Germany, I got mine from the
Netherlands).

So: can one buy an Atari Mouse separately from the Machine itself?


Josef Moellers                      |    c/o Nixdorf Computer AG
 USA: uunet!philabs!linus!nixbur!mollers.pad  |    Abt. DX-PC
!USA: mcvax!unido!nixpbe!mollers.pad          |    Pontanusstr
Phone: [phone]              |    D-4790 Paderborn

------------------------------

Date: 9 Jan 90 18:32:54 GMT
From: tank!cicero![e-mail]  (Jeffrey Smith)
Subject: Communications Package for Kaypro 2
Message-ID: <[e-mail]>


 I am looking for a communications/terminal emulation package for my poor
old Kaypro 2.  Ideally, I could then use it to dial up to the mainframe I
use and have it pretend to be a VT52 or an h19 or some other such useful
device.  Thanks in advance.

Jeff

INTERNET: [e-mail]
BITNET: [e-mail]

------------------------------

Date: 10 Jan 90 17:25:40 GMT
From: oliveb!orc!mipos3!pcocd2![e-mail]  (Justin Masters ~)
Subject: CP/M clock
Message-ID: <[e-mail]>

In article <[e-mail]> [e-mail] (Ian R. Justman) writes:
+Just curious, has anyone successfully implemented the MM58174AN
+real-time clock chip on their system, whether S-100 bus or not?  If
+so, I would very much like to know how, as I got a large system I'm
+using for spare parts.

Check with Jim "Lips" Earl.  He's got a clock setup using the MM58274 (extra
bells and whistles), which is essentially the same.  I'd send you a schematic,
but I still haven't unpacked since moving in that stuff last year.  If he
can't find it, let me know, and I'll dig up a copy for you.
+
+Thanks muchly in advance.
No problem. ;)
+--
+Home:   Ian Justman   |UUCP:(1) My CP/M machine.       |"One of the few
+6612 Whitsett Drive   |     (2) My host.               |die-hard CP/M
+North Highlands, CA   |(1) !pacbell!sactoh0!ijsys!ianj |addicts left on this
+[phone]   95660|(2) !pacbell!sactoh0!ianj       |planet"


-----------------------------------------------------------------------------
Fireman to homeowner:    At one point we  |     Justin Masters
 decided to fight fire with fire...       |
 basically your house burned even faster. | [e-mail]

------------------------------

Date: 10 Jan 90 05:03:48 GMT
From: pacbell!sactoh0![e-mail]  (Ian R. Justman)
Subject: CP/M clock
Message-ID: <[e-mail]>

Just curious, has anyone successfully implemented the MM58174AN
real-time clock chip on their system, whether S-100 bus or not?  If
so, I would very much like to know how, as I got a large system I'm
using for spare parts.

Thanks muchly in advance.
--
Home:   Ian Justman   |UUCP:(1) My CP/M machine.       |"One of the few
6612 Whitsett Drive   |     (2) My host.               |die-hard CP/M
North Highlands, CA   |(1) !pacbell!sactoh0!ijsys!ianj |addicts left on this
[phone]   95660|(2) !pacbell!sactoh0!ianj       |planet"

------------------------------

Date: 9 Jan 90 20:18:36 GMT
From: pdn!dinsdale.paradyne.com![e-mail]  (George W. Leach)
Subject: Looking for software
Message-ID: <[e-mail]>

       I have not even seen a CP/M box in over a decade, let alone use
one.  However, I know someone who has no access to this newsgroup/mailing
list that is interested in obtaining CP/M software.


       He is specifically looking for an implementation of Small C for
CP/M as well as other "good" applications.  Any information that you can
provide to me will be appreciated.  Info on various BBS systems would be
fine.  Pointers to other means of obtaining public domain stuff would also
be appreciated.


       Please reply via e-mail, I do not normally read this newsgroup/list.

Thank You,

George

George W. Leach                    AT&T Paradyne
(uunet|att)!pdn!reggie                Mail stop LG-133
Phone: [phone]                P.O. Box 2826
FAX: [phone]                Largo, FL 34649-2826 USA

------------------------------

Date: 10 Jan 90 14:25:34 GMT
From: att!laidbak![e-mail]  (Luke Weerts)
Subject: Looking for software
Message-ID: <[e-mail]>

In article <[e-mail]> [e-mail] (George W. Leach) writes:
> [stuff deleted]
>       He is specifically looking for an implementation of Small C for
>CP/M as well as other "good" applications.  Any information that you can
>provide to me will be appreciated.  Info on various BBS systems would be
>fine.  Pointers to other means of obtaining public domain stuff would also
>be appreciated.
>George
>

Thought this might be of general interest:

One good source for C stuff on CP/M (or any other OS for that matter)
is C Users Group.  They have a pretty good PD library of C code including
Small C for CP/M.  They also publish a good monthly C mag "C Users Journal"

Their address etc.:

C Users Journal
2601 Iowa Street
Lawrence, Kansas 66047
[phone]

My only relation to the group is one of a satisfied customer.

Luke Weerts

------------------------------

Date: 10 Jan 90 12:48:38 GMT
From: mcsun!hp4nl!kunivv1![e-mail]  (Privileged Account)
Subject: Patch for Z80/Z280 disassembler package
Message-ID: <[e-mail]>

This is a patch for the Z80/Z280 disassembler package. The package was
originally posted as

> Newsgroups: comp.os.cpm
> Subject: Z80/Z280 disassembler in C
> Summary: Here it is
> Keywords: Z80 Z280 disassembler C
> Message-ID: <[e-mail]>
> Date: 27 Dec 89 12:36:54 GMT

This patch corrects the following:

        * It fixes a portability bug (NULL was mistakenly used as 0)

        * It corrects a Z280 disassembler bug ([DD|FD] ED 06/16/26/36 was
          interchanged with [DD|FD] ED 0E/1E/2E/3E)

        * It changes outhex.c to always output leading zero's on byte
          and word values that sometimes need it. This takes care of
          annoying things like

                LD      HL,(9F00H)
                LD      DE,(0A001H)

    * It includes some cosmetic changes that caused problems with
      ancient compilers that accept the =op form (it was already
      marked obsolete by K&R 1. sigh). Thanks to Dru Nelson
      <[e-mail]> for pointing this out to me.

--
Luc Rooijakkers                                 Internet: [e-mail]
Faculty of Mathematics and Computer Science     UUCP: uunet!cs.kun.nl!lwj
University of Nijmegen, the Netherlands         tel. [phone]

*** old/Makefile    Wed Jan 10 12:27:19 1990
--- Makefile    Wed Jan 10 13:18:52 1990
***************
*** 15,16 ****
--- 15,21 ----

+ # Change this if your compiler doesn't have void
+
+ VOID=
+ #VOID=-Dvoid=int
+
  # You might change this if you have gcc
*** old/README    Wed Jan 10 12:27:20 1990
--- README    Wed Jan 10 13:17:44 1990
***************
*** 40,41 ****
--- 40,48 ----

+ - In disas.c, the file to be disassembled is opened with mode "rb",
+   meaning binary mode. On some systems, this may be different from the
+   default text mode.
+
+ - If you don't have a compiler that accepts void, enable the VOID macro
+   in the Makefile.
+
  Byte order is not (should not) be a problem, since I've tried to insure
*** old/dis.c    Wed Jan 10 12:27:24 1990
--- dis.c    Wed Jan 10 13:11:31 1990
***************
*** 29,39 ****
   *
!  * ../../88    Created as symbolic Z280 disassembler
!  * ../../88    Extended to non-symbolic Z280 disassembler
!  * ../../88    Added #if's for Z80 disassembler
!  * 07/07/88    First final version
!  * 12/08/89    Split off output routines
!  * 01/10/89    Split OUT_IO into OUT_INP,OUT_OUTP
!  * 23/12/89    Split off more output routines
!  * 24/12/89    Cleaned up for public release
!  * 27/12/89    Use strchr() instead of strstr()
   *
--- 29,42 ----
   *
!  * ../../88    Created as symbolic Z280 disassembler. lwj
!  * ../../88    Extended to non-symbolic Z280 disassembler. lwj
!  * ../../88    Added #if's for Z80 disassembler. lwj
!  * 07/07/88    First final version. lwj
!  * 12/08/89    Split off output routines. lwj
!  * 01/10/89    Split OUT_IO into OUT_INP,OUT_OUTP. lwj
!  * 23/12/89    Split off more output routines. lwj
!  * 24/12/89    Cleaned up for public release. lwj
!  * 27/12/89    Use strchr() instead of strstr(). lwj
!  * 02/01/90    Replaced several NULL's by AM_NULL's. lwj
!  * 08/01/90    Fixed LDW (HL),rp / LWD rp,(HL) swapped bug. lwj
!  * 10/01/90    Portability mods. lwj
   *
***************
*** 42,46 ****
  #ifdef Z280
!     char DisId[] = "@(#) DIS (Z280) 27/12/89";
  #else
!     char DisId[] = "@(#) DIS (Z80) 27/12/89";
  #endif
--- 45,49 ----
  #ifdef Z280
!     char DisId[] = "@(#) DIS (Z280) 10/01/90";
  #else
!     char DisId[] = "@(#) DIS (Z80) 10/01/90";
  #endif
***************
*** 110,112 ****
      for(bp=buf;s<sp;)
!         *bp++=*s++;

--- 113,115 ----
      for(bp=buf;s<sp;)
!         *bp++ = *s++;

***************
*** 245,247 ****
      if(disp>=0x80)
!         disp+=-0x100;    /* cryptic but portable */

--- 248,250 ----
      if(disp>=0x80)
!         disp += -0x100;    /* cryptic but portable */

***************
*** 578,580 ****
  #else
!                 if(am_code==NULL) {
  #endif
--- 581,583 ----
  #else
!                 if(am_code==AM_NULL) {
  #endif
***************
*** 654,656 ****
  #ifdef Z80
!             if(am_code==NULL) {
  #endif
--- 657,659 ----
  #ifdef Z80
!             if(am_code==AM_NULL) {
  #endif
***************
*** 816,820 ****
              outop("LD"W);
-             outrp((op>>4)&0x03);
-             outs(",");
              outim();
          } else {
--- 819,823 ----
              outop("LD"W);
              outim();
+             outs(",");
+             outrp((op>>4)&0x03);
          } else {
***************
*** 821,825 ****
              outop("LD"W);
-             outim();
-             outs(",");
              outrp((op>>4)&0x03);
          }
--- 824,828 ----
              outop("LD"W);
              outrp((op>>4)&0x03);
+             outs(",");
+             outim();
          }
***************
*** 1119,1121 ****
          case 0x9F:
!             if (am_code==NULL) {
                  outop( (op==0x97) ? "EPUF" : "EPUI" );
--- 1122,1124 ----
          case 0x9F:
!             if (am_code==AM_NULL) {
                  outop( (op==0x97) ? "EPUF" : "EPUI" );
***************
*** 1128,1130 ****
          case 0xAF:
!             if (am_code==NULL) {
                  outop( (op==0xA7) ? "EPUM" : "MEPU" );
--- 1131,1133 ----
          case 0xAF:
!             if (am_code==AM_NULL) {
                  outop( (op==0xA7) ? "EPUM" : "MEPU" );
***************
*** 1139,1141 ****
          case 0xB7:
!             if (am_code==NULL) {
                  outop("INW");
--- 1142,1144 ----
          case 0xB7:
!             if (am_code==AM_NULL) {
                  outop("INW");
***************
*** 1147,1149 ****
          case 0xBF:
!             if (am_code==NULL) {
                  outop("OUTW");
--- 1150,1152 ----
          case 0xBF:
!             if (am_code==AM_NULL) {
                  outop("OUTW");
*** old/disas.c    Wed Jan 10 12:27:26 1990
--- disas.c    Wed Jan 10 13:15:49 1990
***************
*** 21,25 ****
   *
!  * ../../88    Created
!  * 16/12/89    Fixed JR/JP address bug
!  * 26/12/89    Cut down for public release
   *
--- 21,26 ----
   *
!  * ../../88    Created. lwj
!  * 16/12/89    Fixed JR/JP address bug. lwj
!  * 26/12/89    Cut down for public release. lwj
!  * 10/01/90    Portability mods. lwj
   *
***************
*** 27,29 ****

! char DisasId[] = "@(#) DISAS 26/12/89";

--- 28,30 ----

! char DisasId[] = "@(#) DISAS 10/01/90";

***************
*** 108,109 ****
--- 109,112 ----

+     /* open file in binary mode ("rb") */
+
      if((file=fopen(name,"rb"))==NULL) {
***************
*** 237,239 ****
              col++;
!         *linep++=*s++;
      }
--- 240,242 ----
              col++;
!         *linep++ = *s++;
      }
***************
*** 252,254 ****
      while(((col+8)&~7)<=pos) {
!         *linep++='\t';
          col=(col+8)&~7;
--- 255,257 ----
      while(((col+8)&~7)<=pos) {
!         *linep++ = '\t';
          col=(col+8)&~7;
***************
*** 257,259 ****
      while(col<pos) {
!         *linep++=' ';
          col++;
--- 260,262 ----
      while(col<pos) {
!         *linep++ = ' ';
          col++;
*** old/oplist.c    Wed Jan 10 12:27:27 1990
--- oplist.c    Wed Jan 10 13:11:53 1990
***************
*** 20,23 ****
   *
!  * 23/12/89    Split off from dis.c
!  * 26/12/89    Added debugging option
   *
--- 20,24 ----
   *
!  * 23/12/89    Split off from dis.c. lwj
!  * 26/12/89    Added debugging option. lwj
!  * 10/01/90    Portability mods. lwj
   *
***************
*** 25,27 ****

! char OpListId[] = "@(#) OPLIST 26/12/89";

--- 26,28 ----

! char OpListId[] = "@(#) OPLIST 10/01/90";

***************
*** 163,165 ****
      while(*s)
!         *outbufp++=*s++;
  }
--- 164,166 ----
      while(*s)
!         *outbufp++ = *s++;
  }
*** old/optab.c    Wed Jan 10 12:27:28 1990
--- optab.c    Wed Jan 10 13:12:04 1990
***************
*** 20,23 ****
   *
!  * 23/12/89    Split off from dis.c
!  * 26/12/89    Added debugging option
   *
--- 20,24 ----
   *
!  * 23/12/89    Split off from dis.c. lwj
!  * 26/12/89    Added debugging option. lwj
!  * 10/01/90    Portability mods. lwj
   *
***************
*** 25,27 ****

! char OpTabId[] = "@(#) OPTAB 26/12/89";

--- 26,28 ----

! char OpTabId[] = "@(#) OPTAB 10/01/90";

***************
*** 223,225 ****
      for(;*s!='\0';s++)
!         *outbufp++= (*s=='\t') ? ' ' : *s;
  }
--- 224,226 ----
      for(;*s!='\0';s++)
!         *outbufp++ = (*s=='\t') ? ' ' : *s;
  }
*** old/outdebug.c    Wed Jan 10 12:27:29 1990
--- outdebug.c    Wed Jan 10 13:11:05 1990
***************
*** 16,18 ****
   *
!  * 23/12/89    Split off from dis.c
   *
--- 16,18 ----
   *
!  * 23/12/89    Split off from dis.c. lwj
   *
*** old/outhex.c    Wed Jan 10 12:27:30 1990
--- outhex.c    Wed Jan 10 13:10:26 1990
***************
*** 10,12 ****
  #include <stdio.h>
- #include <ctype.h>

--- 10,11 ----
***************
*** 17,21 ****
   *
!  * 12/08/89    Split off from dis.c
!  * 01/10/89    Split OUT_IO into OUT_INP, OUT_OUTP
!  * 23/12/89    Cleaned up for public release
   *
--- 16,22 ----
   *
!  * 12/08/89    Split off from dis.c. lwj
!  * 01/10/89    Split OUT_IO into OUT_INP, OUT_OUTP. lwj
!  * 23/12/89    Cleaned up for public release. lwj
!  * 08/01/90    Always include leading zero when possibly needed. lwj
!  * 10/01/90    Portability mods. lwj
   *
***************
*** 23,25 ****

! char OutHexId[] = "@(#) OUTHEX 23/12/89";

--- 24,26 ----

! char OutHexId[] = "@(#) OUTHEX 10/01/90";

***************
*** 43,45 ****
      case OUT_EPU:
!         sprintf(buf,"%02XH",value);
          break;
--- 44,46 ----
      case OUT_EPU:
!         sprintf(buf,"%03XH",value);
          break;
***************
*** 49,51 ****
      case OUT_CALL:
!         sprintf(buf,"%04XH",value);
          break;
--- 50,52 ----
      case OUT_CALL:
!         sprintf(buf,"%05XH",value);
          break;
***************
*** 74,76 ****
      case OUT_JR:
!         sprintf(buf,"%04XH",addr+value);
          break;
--- 75,77 ----
      case OUT_JR:
!         sprintf(buf,"%05XH",addr+value);
          break;
***************
*** 88,92 ****
      }
-
-     if(isalpha(buf[0]))
-         outs("0");

--- 89,90 ----
*** old/outsym.c    Wed Jan 10 12:27:31 1990
--- outsym.c    Wed Jan 10 13:10:45 1990
***************
*** 16,18 ****
   *
!  * 23/12/89    Split off from dis.c
   *
--- 16,18 ----
   *
!  * 23/12/89    Split off from dis.c. lwj
   *

--
Luc Rooijakkers                                 Internet: [e-mail]
Faculty of Mathematics and Computer Science     UUCP: uunet!cs.kun.nl!lwj
University of Nijmegen, the Netherlands         tel. [phone]

------------------------------

Date: Sun, 7 Jan 90 22:19:00 CST
From: Forgive and Remember!!! <[e-mail]>
Subject: Questions

  - - The original note follows - -

I recently sent for a log file of the messages of this list.  TINY.
So rather than sending for a second log file for an answer to my
question I thought that I would post a message.

In the log file that I got there was talk of SUPERBRAIN.  What is it ?

Second question.  Since I'm very new to cp/m and you guys out there
seem to know TONS of info about cp/m, I figured that you should know
about the value of my cp/m+onn o

Many years ago my parents got me a commodore 128 computer, it has a
z80 microprocessor and I've used it for little or nothing.  Mostly
because I haved no programs that can do anything or that are any
fun.    Is there anything out there ???
        Is there anyone out there ???

Ok.....it's your turn....FIRE AWAY.....

--------Russ

------------------------------

End of INFO-CPM Digest V90 Issue #4
***********************************
12-Jan-90 20:19:06-MST,10017;000000000000
Return-Path: <[e-mail]>
Date: Fri, 12 Jan 90 20:15:18 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #5
To: [e-mail]

INFO-CPM Digest             Fri, 12 Jan 90       Volume 90 : Issue    5

Today's Topics:
                         CP/M clock (2 msgs)
        IBM bus to SCSI adaptor//IOMEGA controller transplant
                            NEC V20 / CPM
                    S-100 Cromemco 8PIO ... help?
                       Thanks to L. Rooijakkers
                       Turbo-Modula-2 Problems?
----------------------------------------------------------------------

Date: 12 Jan 90 06:35:33 GMT
From: [e-mail]  (Roger Hanscom)
Subject: CP/M Clock
Message-ID: <[e-mail]>

There are plans in the Jul/Aug 1981 Microsystems Journal (p. 64) for a S-100
clock based on the MSM5832 chip.  It uses an 8255 PPI chip for the clock
port.  Those of you with eleven bits of unused parallel port could probably
rig up the clock chip on that with a minimum of parts count.  I just got done
wire wrapping the complete circuit for my S-100 system, and it works fine.
Unfortunately the software published in the article got munged, so if
anyone is interested, I can provide listings of what I came up with.  I've
got two clock-read entry points in ROMed code.  One reads the clock and
returns to the monitor (a monitor "date" command is next!), the other does
a ret just like any other subroutine, so it can be called from an application.
When CP/M boots, it prints the date and date at the top of the screen, and I
put the day and date on printed listings.  I just wish that there was an
easy way to timestamp files in CP/M 2.2 @:^).

              roger               [e-mail]

------------------------------

Date: 11 Jan 90 17:32:54 GMT
From: swrinde!zaphod.mps.ohio-state.edu!sunybcs!nsscb![e-mail]  (Andy Meyer)
Subject: CP/M clock
Message-ID: <[e-mail]>

In article <[e-mail]> [e-mail] (Ian R. Justman) writes:
> Just curious, has anyone successfully implemented the MM58174AN
> real-time clock chip on their system, whether S-100 bus or not?

If your system has a Z80 CPU, you may want to try a Kenmore Z-Time clock.
It's a piggyback board which plugs into the CPU socket of your machine
and then you plug your CPU chip into the clock board. It looks very
easy to "talk to", although I'm still having a tough time trying to
cram one into my Altos 580. (The motherboard is below the hard disk
and controller, and there's very little clearance. Then, of course, the
40-pin DIP headers I bought to build an extender cable hang too far over
the edges of the socket, and interfere with other chips...)

I don't have their address handy, but the Z-Time clock is made by an
outfit in Rochester, NY. It shouldn't be too tough to find one.

Andy
--
 Andreas Meyer N2FYE                 AT&T National Systems Support Center
 uucp: ..!sunybcs!nsscb!ameyer  or:  [e-mail]
 Remember: Never moon a werewolf.    att!ulysses!nsscb!rebus!ameyer

------------------------------

Date: 11 Jan 90 16:55:21 GMT
From: sumax!amc-gw!sigma!flash![e-mail]  (William Swan)
Subject: IBM bus to SCSI adaptor//IOMEGA controller transplant
Message-ID: <[e-mail]>

In article <[e-mail]> [e-mail] (Roger Ivie) writes:
}>>Has anyone fooled around with IOMEGA "Bernoulli Box" drives?  I am
}>>wondering whether I can adapt a cheap 10 + 10 drive originally
}>>intended for the IBM PC to work with my Mac. [...]
}Some old sales literature that I have for the beasties indicates that they
}are SASI rather than SCSI devices. [...]

This was true - the set I connected to my Alspa CP/M box long about '82
were SASI drives, but the PROMs in the set I have now are explicitly
labelled "SCSI". None of which is very helpful to Mr.Bergman who asked
the original question...



--
Bill Swan      [e-mail]          Send postal address for info:
    Innocent but in prison in Washington State for 13.5 years:
    Ms. Debbie Runyan: incarcerated 01/1989, scheduled release 07/2002.
                       In now:  0 years, 11 months,  3 weeks,  1 day.

------------------------------

Date: Fri, 12 Jan 90 16:56 MET
From: Roland Barenbrug <[e-mail]>
Subject: NEC V20 / CPM

As far as I know the NEC V20 processor has the capability to
execute Z80 (or 8080 ?) opcodes. Is there some program that supports
these capabilities and e.g. realizes a CP/M environment on a MSDOS
machine ? I know this application might sound quite weird, but I need
it because my CP/M system has no harddisk at the moment.
The last problem could be solved if some can supply information on
a cheap ECB bus (well known in Europe) compatible harddisk controller.

Thanks for any information,

Roland Barenbrug


PTT Research Neher Laboratorium
Leidschendam, Netherlands

Bitnet : [e-mail]     Domain: [e-mail]

------------------------------

Date: 12 Jan 90 06:08:49 GMT
From: [e-mail]  (Roger Hanscom)
Subject: S-100 Cromemco 8PIO ... help?
Message-ID: <[e-mail]>


Does anybody have dox for an S-100 Cromemco 8PIO, or know anything about one?

I have a bunch of questions about the board.  I bought it for scrap, and of
course there was no documentation with it at all.

  /-------------------------------------------------------\
  |  xxxxxxxx    ------- ------- ------- -------    ----- |
  |              | H67 | | H45 | | H23 | | H01 |    | R | |
  | ----------   ------- ------- ------- -------    | 1 | |
  | |   S1   |       C R O M E M C O  8 P I O       ----- |
  | ----------                                      ----- |
  | ----------                                      | R | |
  | |   S2   |                                      | 2 | |
  | ----------                                      ----- |
  |                                                       |
  |                                                       |
  |                                                       |
  |                                                       |
  |                                                       |
  \_____                                      ------------/
       |                                      |
       ----------------------------------------
1.  S1 & S2 are 8 position dip switches. The leftmost 5 bits of S2 set the MSB
    of the card address (A3->A7), and then the 25-pin headers (H0->H7) are the
    8 parallel ports counting up from the base address.  What are the rightmost
    3 positions of this switch used for??  They are marked D0->D2.
2.  The x's represent 8 LEDs that seem to be controlled by the 8 bits of S1,
    and seem to appear on port7.  Surely there must be more??  What am I
    missing??
3.  Each 25-pin header (Hkl) has the following pin-out:
           ? 0 1 2 3 4 5 6 7 ? ? ? *   <---port l
           ? ? ? 0 1 2 3 4 5 6 7 ? ?   <---port k
    where pin * is cut off.  I can find the bit positions (as shown), and the
    ?'s are probably handshakes, etc.  But which are what?  R1 and R2 are
    relays, and R1 audibly latches on pins 0 and 1 of port 1.  What are they
    used for and how?
4.  To the left of the relays there are jumper positions marked:  NC, Jn-24,
    Jn-23, and PIC, where n is 4 for R1 and 3 for R2.  What are these for?
    Jn-23 and Jn-24 are connected to pins 23 and 24 of H01 and H23.  Do bits
    0 and 1 of ports 1 and 3 supply AC or DC to pins 23 and 24 of the header?

The relays are marked: "*SIGMA (* is a backward RU)
                        60RE1S-5DC
                        1A,28VDC
                        .5A,120VAC"
The board has an optoisolator on it MCT66, and one other jumper (factory
installed??) labeled "Port 6 out".  It is: REV. E1, MOD LEVEL 1.

The card is in really good shape, and is quite usable, as long as I can get
some help on these questions.  I will appreciate any clues.

            roger               [e-mail]

------------------------------

Date: 11 Jan 90 10:27:09 +0100
From: [e-mail]
Subject: Thanks to L. Rooijakkers

I would like to thank Luc Rooijakkers, for the work he
did on the Z280 disassembler.

Luc: be seeing you

Eric Toonen
[e-mail]


------------------------------

Date: Fri, 12 Jan 90 15:21+0100
From: [e-mail]
Subject: Turbo-Modula-2 Problems?
Message-ID: <900112142128.163676@DMZRZU71-UNI-MAINZ--GERMANY>

 I encountered a serious problem with Turbo-Modula 2 Version 1.0
for Z80. When using the TM2-environment heavily, editing, compiling
etc., it happens that existing files not concerned with M2 will be
overwritten. Damage is reported by CLEANDIR, error message is:
'two files share the same block.' or so.
On my 20 Meg hard drive, TM2 is installed on user area 3. The affected files
mostly, if not always,  reside on user 0 to 2.
Im am running ZCPR33 and NOVADOSH. I never had such problems with
any other software. Could it be the TM2 'RENAME' Routine?
How could it be fixed?

Ruediger.


-------------------------------------------------------------------------------
Ruediger Soerensen, University of Mainz, W. Germany
                    Dpt. of Meteorology

BITNET:         ROGER@DMZRZU71
                  CPM@DMZRZU71
paper mail:
                    R. Soerensen
                    Universitaet Mainz
                    Inst. f. Meteorologie
                    D-6500 Mainz 1
-------------------------------------------------------------------------------

------------------------------

End of INFO-CPM Digest V90 Issue #5
***********************************
12-Jan-90 23:28:33-MST,7469;000000000000
Mail-From: KPETERSEN created at 12-Jan-90 23:23:56
Return-Path: <[e-mail]>
Date: Fri, 12 Jan 90 23:23:55 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #6
To: [e-mail]

INFO-CPM Digest             Fri, 12 Jan 90       Volume 90 : Issue    6

Today's Topics:
                          3-1/2" disc drives
        IBM bus to SCSI adaptor//IOMEGA controller transplant
            NEED info on Morrow Designs S100 CP/M machine
                  TUART & CP/M:  good news, bad news
----------------------------------------------------------------------

Date: 10 Jan 90 01:16:46 GMT
From: samsung!usc!cs.utexas.edu!hellgate.utah.edu!cc.utah.edu!cc.usu.edu![e-mail]  (Roger Ivie)
Subject: 3-1/2" disc drives
Message-ID: <[e-mail]>

In article <[e-mail]>, [e-mail] (Richard Loken) writes:
> I recently embarked on a project to put 3-1/2" 1.44 Mbyte wafer drives in my
> dear old TRS80 Model II.  I randomly purchased 3 Panasonic drives and got out
> my dentist pliers and got the pinouts and some jumper info from Matsushita.
>
>
>     AT - PS2    (gag, yuck, my trash-80 may reject them)
>     A - B
>
    AT - PS2 probably governs the operation of the Diskette Changed/Drive
    Ready line. ATs need diskette changed, and I had assumed that PS/2s
    did also.

    It is also possible that this controls drive selects in conjunction
    with the A - B option. ATs have a twisty in the cable so that all
    drives are jumpered as drive one. It is mildly possible that PS/2s
    do not, and the A - B switch would control the drive select (either
    0 or 1) if the thing is in PS/2 mode.

> How do you terminate these little rice boxes?  I see not a hint of a termination
> avenue.

    These buggers usually have high-resistance terminators (abt 3k)
    in them that are hard wired on. Since the terminators are high
    resistance, it doesn't really hurt to have two terminated
    drives in the system.

===============================================================================
Roger Ivie

35 S 300 W
Logan, Ut.  84321
[phone]
===============================================================================

------------------------------

Date: 10 Jan 90 01:11:20 GMT
From: zaphod.mps.ohio-state.edu!uwm.edu!cs.utexas.edu!hellgate.utah.edu!cc.utah.edu!cc.usu.edu![e-mail]  (Roger Ivie)
Subject: IBM bus to SCSI adaptor//IOMEGA controller transplant
Message-ID: <[e-mail]>

In article <[e-mail]>, [e-mail] (William Swan) writes:
> In <[e-mail]> [e-mail] (Michael Bergman) writes:
>>Has anyone fooled around with IOMEGA "Bernoulli Box" drives?  I am
>>wondering whether I can adapt a cheap 10 + 10 drive originally
>>intended for the IBM PC to work with my Mac. [...]
>

Some old sales literature that I have for the beasties indicates that they
are SASI rather than SCSI devices. I don't have the literature handy, so I
may be mistaken; nevertheless, I distinctly remember that they were SASI
devices. Given that SCSI is rumored to be a superset of SASI, they may
work. But I would be very surprised.

===============================================================================
Roger Ivie

35 S 300 W
Logan, Ut.  84321
[phone]
===============================================================================

------------------------------

Date: Sat, 13 Jan 90 00:09:51 EST
From: [e-mail] (Mark Becker)
Subject: NEED info on Morrow Designs S100 CP/M machine
Message-ID: <9001130509.AA10248@rice-chex>

Hello *

In front of me is a Morrow Designs CP/M S100 machine.  It has a hard
drive, a floppy (8"), and some boards in the card cage.  The boards are:

    * MPZ80 Processor board.  Everything is here.. EPROM is
      labelled "MON 4.45".  There is a DIP switch on the card, 8
      positions.  There is one empty socket; looks like room for
      another EPROM.

    * DJDMA Floppy controller board.

    * MM65K16S 64K memory card.  Loaded with 32 6116 2K x 8 static
      RAM chips.  Two sets of DIP switches, lots of headers with
      push-on shorting blocks.  There is one empty 20-pin socket.
      (My guess is that the board would do 16-bit transfers if the
       host processor could handle it.)

    * An HDCA-4A Winchester Controller.  It's wired to an 8" 20
      MByte hard drive.

    * Lastly, a Multi-IO Interface board.  Three 8250's, an 8259
      PIA, room for two EPROMS, and what looks like a real-time
      clock.

For those that have some experience in dealing with Morrow hardware, a
question: Turning the box ON and pressing RESET causes the hard drive
to move it's heads a bit.. and then a message is displayed: DFBA4

I then see a ":" prompt.  In tinkering around, I can display memory.

The previous owner said he had never seen anything like this; his
experience was that the machine had always booted up, displaying an A>
prompt.

Sigh.  No books, no manuals, nothing.  The machine was to serve a
useful purpose; with YOUR help it may still serve.

If YOU (the reader) have ANY info on these boards, switch settings,
whatever, please get in touch with me.  Pointers to hardcopy on the
manuals would be very much appreciated.

Save bandwidth - use e-mail.  I will reply.  If sufficient interest, I
will summarize to the group.

Regards,
Mark
+-----------------------------------------------+-----------------------+
| Mark Becker                    | .signature under    |
| Internet: [e-mail]            |    construction    |
| USENET:   {backbone}!mbmm!mbeck        |            |
+-----------------------------------------------+-----------------------+

------------------------------

Date: 11 Jan 90 19:11:43 GMT
From: titanic.cs.wisc.edu![e-mail]  (Anthony Rich)
Subject: TUART & CP/M:  good news, bad news
Message-ID: <[e-mail]>

The GOOD news:

Thanks for the many replies to my request for a Cromemco S-100 TUART
(dual serial port) board.  If anyone else needs one, email me and I'll
point you to some people who can supply one.  Prices varied from "swap
ya for something" to "free, if you pay postage" to about $30.

The BAD news:

I've gotten ZERO response to my questions about the availability of a CP/M
that runs on a Cromemco and boots from 8" and 5.25" Tandon floppies.

I still don't know if MICAH (a former supplier) is still in business in
Sausalito, CA.  (Can somebody out there in CA check?  Sausalito is still
there, isn't it? :^)  My most recent address for MICAH is:

   Dr. Jerome Freedman
   MICro Applications & Hardware
   15 Princess Street
   Sausalito, CA 94965.

If anyone has Tandon floppy-driver source code (8080/Z80), I might be able
to make-do with that.

Some other people have also expressed an interest in a version of CP/M for
the Cromemco if I can track one down.  Thanks in advance for any leads you
can provide!

   Tony
--
------------------------------------------------------------------------
Email:       [e-mail]  Phone:  [phone]
Disclaimer:  The opinions above are mine.  Others may agree or disagree.
------------------------------------------------------------------------

------------------------------

End of INFO-CPM Digest V90 Issue #6
***********************************
14-Jan-90 13:19:21-MST,13726;000000000000
Return-Path: <[e-mail]>
Date: Sun, 14 Jan 90 13:15:25 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #7
To: [e-mail]

INFO-CPM Digest             Sun, 14 Jan 90       Volume 90 : Issue    7

Today's Topics:
                    CompuPro documentation sought
                        INFO-CPM Digest V90 #6
                 Superbrain & Commodore 128 questions
                                 ZMP
----------------------------------------------------------------------

Date: 13 Jan 90 05:42:31 GMT
From: crash![e-mail]  (Marc Wilson)
Subject: CompuPro documentation sought
Message-ID: <[e-mail]>

Hello all.

I need to find documentation for the following S-100 boards.  I know how
to set up a couple of them, but with no manuals, I'm still pretty much
in the dark.

The boards are:

    1) CompuPro Disk 3
    2)   "  "   Disk 1A
    3)   "  "   Interfacer 3
    4)   "  "   Interfacer 4
    5)   "  "   512k MDrive-H
    6)   "  "   RAM 22
    7)   "  "   RAM 23
    8)   "  "   CPU 286

I have the RAM 22 and the MDrive-H in my box right now, and they work ok.
The CompuPro CP/M 8-16 manual has setup information for most of the rest
of these, but it's just switch settings.  No mention of what the switches
DO.  Or what all the shunts do, which for something like the Interfacer
3/4, is asking for trouble.  I mean, how would you like to have to
configure something as complicated as a System Support 1 ( which I DO
have a manual for, BTW ) without the manual?

Any information would be much appreciated.

--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Marc Wilson
     ARPA: ...!crash![e-mail]
           ...!crash!pnet01!pro-sol![e-mail]
     UUCP: [ cbosgd | hp-sdd!hplabs | sdcsvax | nosc ]!crash!mwilson
     INET: [e-mail]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

------------------------------

Date: Sun, 14 Jan 90 11:11:06 PDT
From: [e-mail]
Subject: INFO-CPM Digest V90 #6
Message-ID: <[e-mail]>

 *** VMS error in delivery mail, error message follows ***

EXOS Mail server: delivery error: %MAIL-E-OPENOUT, error opening LSI$ALTDISK:[TFOUSER]MAIL.MAI; as output
EXOS Mail server: delivery error: -SYSTEM-F-IVDEVNAM, invalid device nameISK:[TFOUSER]MAIL.MAI; as output
EXOS Mail server: delivery error:
%MAIL-E-OPENOUT, error opening LSI$ALTDISK:[TFOUSER]MAIL.MAI; as output
-SYSTEM-F-IVDEVNAM, invalid device name

 *** Original message follows ***

From : [e-mail]
Subject:  INFO-CPM Digest V90 #6

Return-path: <@WSMR-SIMTEL20.ARMY.MIL:[e-mail]>
Received: from WSMR-SIMTEL20.ARMY.MIL by vlsi.JPL.NASA.GOV
          id 0000009D002 ; Sun, 14 Jan 90 11:09:10 PDT
Date:  Fri, 12 Jan 90 23:23:55 MST
From:  [e-mail]
Reply-To:  [e-mail]
To:  [e-mail]

INFO-CPM Digest             Fri, 12 Jan 90       Volume 90 : Issue    6

Today's Topics:
                          3-1/2" disc drives
        IBM bus to SCSI adaptor//IOMEGA controller transplant
            NEED info on Morrow Designs S100 CP/M machine
                  TUART & CP/M:  good news, bad news
----------------------------------------------------------------------

Date: 10 Jan 90 01:16:46 GMT
From: samsung!usc!cs.utexas.edu!hellgate.utah.edu!cc.utah.edu!cc.usu.edu![e-mail]  (Roger Ivie)
Subject: 3-1/2" disc drives
Message-ID: <[e-mail]>

In article <[e-mail]>, [e-mail] (Richard Loken) writes:
> I recently embarked on a project to put 3-1/2" 1.44 Mbyte wafer drives in my
> dear old TRS80 Model II.  I randomly purchased 3 Panasonic drives and got out
> my dentist pliers and got the pinouts and some jumper info from Matsushita.
>
>
>     AT - PS2    (gag, yuck, my trash-80 may reject them)
>     A - B
>
    AT - PS2 probably governs the operation of the Diskette Changed/Drive
    Ready line. ATs need diskette changed, and I had assumed that PS/2s
    did also.

    It is also possible that this controls drive selects in conjunction
    with the A - B option. ATs have a twisty in the cable so that all
    drives are jumpered as drive one. It is mildly possible that PS/2s
    do not, and the A - B switch would control the drive select (either
    0 or 1) if the thing is in PS/2 mode.

> How do you terminate these little rice boxes?  I see not a hint of a termination
> avenue.

    These buggers usually have high-resistance terminators (abt 3k)
    in them that are hard wired on. Since the terminators are high
    resistance, it doesn't really hurt to have two terminated
    drives in the system.

===============================================================================
Roger Ivie

35 S 300 W
Logan, Ut.  84321
[phone]
===============================================================================

------------------------------

Date: 10 Jan 90 01:11:20 GMT
From: zaphod.mps.ohio-state.edu!uwm.edu!cs.utexas.edu!hellgate.utah.edu!cc.utah.edu!cc.usu.edu![e-mail]  (Roger Ivie)
Subject: IBM bus to SCSI adaptor//IOMEGA controller transplant
Message-ID: <[e-mail]>

In article <[e-mail]>, [e-mail] (William Swan) writes:
> In <[e-mail]> [e-mail] (Michael Bergman) writes:
>>Has anyone fooled around with IOMEGA "Bernoulli Box" drives?  I am
>>wondering whether I can adapt a cheap 10 + 10 drive originally
>>intended for the IBM PC to work with my Mac. [...]
>

Some old sales literature that I have for the beasties indicates that they
are SASI rather than SCSI devices. I don't have the literature handy, so I
may be mistaken; nevertheless, I distinctly remember that they were SASI
devices. Given that SCSI is rumored to be a superset of SASI, they may
work. But I would be very surprised.

===============================================================================
Roger Ivie

35 S 300 W
Logan, Ut.  84321
[phone]
===============================================================================

------------------------------

Date: Sat, 13 Jan 90 00:09:51 EST
From: [e-mail] (Mark Becker)
Subject: NEED info on Morrow Designs S100 CP/M machine
Message-ID: <9001130509.AA10248@rice-chex>

Hello *

In front of me is a Morrow Designs CP/M S100 machine.  It has a hard
drive, a floppy (8"), and some boards in the card cage.  The boards are:

    * MPZ80 Processor board.  Everything is here.. EPROM is
      labelled "MON 4.45".  There is a DIP switch on the card, 8
      positions.  There is one empty socket; looks like room for
      another EPROM.

    * DJDMA Floppy controller board.

    * MM65K16S 64K memory card.  Loaded with 32 6116 2K x 8 static
      RAM chips.  Two sets of DIP switches, lots of headers with
      push-on shorting blocks.  There is one empty 20-pin socket.
      (My guess is that the board would do 16-bit transfers if the
       host processor could handle it.)

    * An HDCA-4A Winchester Controller.  It's wired to an 8" 20
      MByte hard drive.

    * Lastly, a Multi-IO Interface board.  Three 8250's, an 8259
      PIA, room for two EPROMS, and what looks like a real-time
      clock.

For those that have some experience in dealing with Morrow hardware, a
question: Turning the box ON and pressing RESET causes the hard drive
to move it's heads a bit.. and then a message is displayed: DFBA4

I then see a ":" prompt.  In tinkering around, I can display memory.

The previous owner said he had never seen anything like this; his
experience was that the machine had always booted up, displaying an A>
prompt.

Sigh.  No books, no manuals, nothing.  The machine was to serve a
useful purpose; with YOUR help it may still serve.

If YOU (the reader) have ANY info on these boards, switch settings,
whatever, please get in touch with me.  Pointers to hardcopy on the
manuals would be very much appreciated.

Save bandwidth - use e-mail.  I will reply.  If sufficient interest, I
will summarize to the group.

Regards,
Mark
+-----------------------------------------------+-----------------------+
| Mark Becker                    | .signature under    |
| Internet: [e-mail]            |    construction    |
| USENET:   {backbone}!mbmm!mbeck        |            |
+-----------------------------------------------+-----------------------+

------------------------------

Date: 11 Jan 90 19:11:43 GMT
From: titanic.cs.wisc.edu![e-mail]  (Anthony Rich)
Subject: TUART & CP/M:  good news, bad news
Message-ID: <[e-mail]>

The GOOD news:

Thanks for the many replies to my request for a Cromemco S-100 TUART
(dual serial port) board.  If anyone else needs one, email me and I'll
point you to some people who can supply one.  Prices varied from "swap
ya for something" to "free, if you pay postage" to about $30.

The BAD news:

I've gotten ZERO response to my questions about the availability of a CP/M
that runs on a Cromemco and boots from 8" and 5.25" Tandon floppies.

I still don't know if MICAH (a former supplier) is still in business in
Sausalito, CA.  (Can somebody out there in CA check?  Sausalito is still
there, isn't it? :^)  My most recent address for MICAH is:

   Dr. Jerome Freedman
   MICro Applications & Hardware
   15 Princess Street
   Sausalito, CA 94965.

If anyone has Tandon floppy-driver source code (8080/Z80), I might be able
to make-do with that.

Some other people have also expressed an interest in a version of CP/M for
the Cromemco if I can track one down.  Thanks in advance for any leads you
can provide!

   Tony
--
------------------------------------------------------------------------
Email:       [e-mail]  Phone:  [phone]
Disclaimer:  The opinions above are mine.  Others may agree or disagree.
------------------------------------------------------------------------

------------------------------

End of INFO-CPM Digest V90 Issue #6
***********************************

------------------------------

Date: 13 Jan 90 18:48:53 GMT
From: cs.utexas.edu!wuarchive!texbell!vector!attctc!usource![e-mail]  (Dave Goodman)
Subject: Superbrain & Commodore 128 questions
Message-ID: <[e-mail]>

I am posting the following  for David Goodenough <[e-mail]>,
who is temporarily unable to post to this newsgroup.

--

Newsgroup: comp.os.cpm
Subject: Superbrain and Commodore 128 questions

Someone recently asked:
> In the log file that I got there was talk of SUPERBRAIN.  What is it ?

The Intertec Superbrain is a CP/M machine, can't remember too much about
them (I used them a bit while at college back in 1981 and 1982). Main things
that spring to mind is that it's a VT52 emulating terminal, uses a 1791
disk controller which has a nasty habit of inverting data written to disk.
Like most CP/M machines it has it's quirks, but once you get the hang of how
to work around them, you'll be all set.

> Many years ago my parents got me a commodore 128 computer, it has a
> z80 microprocessor and I've used it for little or nothing.  Mostly
> because I haved no programs that can do anything or that are any
> fun.    Is there anything out there ???
>         Is there anyone out there ???

You need to get that C128 going in CP/M mode!! First things first, drop me
a line with your US mail address and I'll ship out a disk with some useful
(read indispensible) utilities. I'll include a communications program all
set up for the C128, and once you're talking to whatever host you use (you
do have a 1670 modem, right?) I can start E-mailing out the games and other
goodies to get the 128 to strut it's stuff. If you have a Q-link account,
look me up - I'm Delta G there, and often times stick my head round the
door of conferences and the like.

If you are on a BITNET host, drop a line to [e-mail]
saying /PDDIR and HELP. That will put you in touch with the SIMTEL20
CP/M archives which are so full of good stuff it's unreal.

Please respond by E-mail to the addresses below, not to the addresses in
the header, as this is being posted by a friend.

                        Yours,
--
        [e-mail] - David Goodenough               +---+
                                                IHS     | +-+-+
        ..... !harvard!xait!lakart!dg                   +-+-+ |
AKA:    [e-mail]                     +---+
--
                                      __|__
Dave Goodman .   .   .   .   . --o--o--(_)--o--o-- .   .   .   .   . At home:
Internet: [e-mail]  .  [e-mail]
uucp:  ...attctc!usource!daveg          .  ...attctc!usource!misty!daveg

------------------------------

Date: Fri, 12 Jan 90 20:11:44 MST
From: Raymond Carter STEWS-NR-AD <[e-mail]>
Subject: ZMP

I am aware that ZMP (a Zmodem program) exists, and I see that there are
several overlays for it.  However, I see no note on an overlay for the C-128.
First, does anyone have a C-128 overlay for ZMP.  Next, if no one has done it
yet, can anyone tell me if the ZMP overlays are like anything else in the
world.  I have done a 128 overlay for QTERM - are they in anyway similar?


------------------------------

End of INFO-CPM Digest V90 Issue #7
***********************************
17-Jan-90 01:31:29-MST,6982;000000000000
Mail-From: KPETERSEN created at 17-Jan-90 01:23:20
Return-Path: <[e-mail]>
Date: Wed, 17 Jan 90 01:23:20 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #8
To: [e-mail]

INFO-CPM Digest             Wed, 17 Jan 90       Volume 90 : Issue    8

Today's Topics:
                                Kermit
                              Questions
                            Xerox 850 help
             Z-System compatible communications software
                     ZCPR33 vs. ZCPR34? (2 msgs)
----------------------------------------------------------------------

Date: 15 Jan 90 01:00:49 GMT
From: mcsun!sunic!sics.se!sics.se![e-mail]  (Kent Boortz)
Subject: Kermit
Message-ID: <[e-mail]>

Does anyone know where I can find the Kermit program for an old IBM? I think
it is running CP/M-86 but I know very little about CP/M and all the
documentation is gone. I have looked at the simtel kermit directory but
I could not find any executables. Thanks in advance...

Kent Boortz, SICS, Sweden

By the way, is there a Tetris clone that I can run on this machine?

------------------------------

Date: 15 Jan 90 01:33:17 GMT
From: pasteur!helios.ee.lbl.gov!hellgate.utah.edu!cc.utah.edu!cc.usu.edu![e-mail]  (Roger Ivie)
Subject: Questions
Message-ID: <[e-mail]>

In article <[e-mail]>, [e-mail] (Forgive and Remember!!!) writes:
> In the log file that I got there was talk of SUPERBRAIN.  What is it ?
>
    It's an old CP/M machine. It's the first machine that I saw
    advertised with 80 track 5.25" drives.

> Many years ago my parents got me a commodore 128 computer, it has a
> z80 microprocessor and I've used it for little or nothing.  Mostly
> because I haved no programs that can do anything or that are any
> fun.    Is there anything out there ???

    Unfortunately, you're a couple of months late. Until recently,
    Computer Shopper had an article devoted to CP/M on the 128.

    Yes, there's stuff out there. But I don't know where it is and
    what is available for the 128. I'm running software that I
    "obtained" about 10 years ago (well... except for Turbo Pascal
    and Wordstar 4.0; those I bought only a few years ago).

===============================================================================
Roger Ivie

35 S 300 W
Logan, Ut.  84321
[phone]
===============================================================================

------------------------------

Date: 16 Jan 90 03:57:58 GMT
From: fox!portal!cup.portal.com![e-mail]  (David H Close)
Subject: Xerox 850 help
Message-ID: <[e-mail]>

A friend has acquired a Xerox 850 without documentation or (apparently)
any boot disk.  He previously had a Xerox 820 but the boot disks from it
won't work on the 850.  I suspect, without seeing either, that the 850
uses a double-density, or double-sided, disk for booting, whereas the
820 had neither.  The 850 does not have any sort of hard disk.

If anyone can assist in determining what my friend has, might be interested
in purchasing it, or can help get it running, please let me know.  The
friend does not have net access and is physically in Los Angeles.

Dave Close, Compata, Arlington, Texas
[e-mail]

------------------------------

Date: Tue, 16 Jan 90 11:53:09 EST
From: [e-mail]
Subject: Z-System compatible communications software

Ian Justman asked (a while ago -- sorry it has taken me so long to get
around to writing a reply):

>> Does anyone know of a Z-System compatible communications package?

I'm not quite sure what is meant by this question.  There are no comm
programs that know about named directories, and so far none is able to use
the TCAP to configure the terminal codes, though I think it would be
possible to write a MEX or IMP overlay that would read the TCAP and hot-
patch the codes into the overlay.

If what you were hoping for is a comm package that would run right out of
the box, there is no hope.  The Z-System environment does not have any
information about the modem ports, and there is no BIOS standard for
supporting them as in MS-DOS.

There is a cute tool that Bruce Morgen invented and I elaborated on to allow
MEX and MEX-Plus (which internally looks a bit like Z-System in so far as it
allows multiple commands on a line) to shell a command out to the operating
system and then return automatically to MEX where it left off.  This is
called MEX2Z or MEX+2Z and should be on Z-Nodes (and perhaps on SIMTEL20).

Hope this helps a little...

-- Jay Sage


------------------------------

Date: 15 Jan 90 04:58:07 GMT
From: portal!cup.portal.com![e-mail]  (William Thomas Daugustine)
Subject: ZCPR33 vs. ZCPR34?
Message-ID: <[e-mail]>

Altho I do use NZ-COM (ZCPR34), I have some questions regarding it
and the differences from ZCPR33

About the only difference I know of is that NZCOM is an auto-installing
version of ZCPR33. What other differences are there? Or are there
any other differeces?

Thanx!

|----------------------------------------------------------------|
| Billy D'Augustine          [phone] | The author is not   |
| [e-mail]                | responsable for     |
| sun!portal!cup.portal.com!Azog-Thoth     | typgraphic errors!  |
|----------------------------------------------------------------|

------------------------------

Date: 15 Jan 90 21:42:38 GMT
From: pacbell!sactoh0![e-mail]  (Ian R. Justman)
Subject: ZCPR33 vs. ZCPR34?
Message-ID: <[e-mail]>

In article <[e-mail]>, [e-mail] (William Thomas Daugustine) writes:
>
> Altho I do use NZ-COM (ZCPR34), I have some questions regarding it
> and the differences from ZCPR33
>
> About the only difference I know of is that NZCOM is an auto-installing
> version of ZCPR33. What other differences are there? Or are there
> any other differeces?

I would like to know too.  I am running ZCPR33 on my system and
thoroughly enjoying it.  I _HAD_ to run it so I could use VLU.  The
only difference is that I downloaded it from a local BBS a while
back, and don't understand how NZCOM works, nor can I presently
afford it.  So, I would like to know how that works, too, just for
the fun of it...
--
Home:   Ian Justman   |UUCP:(1) My CP/M machine.       |"One of the few
6612 Whitsett Drive   |     (2) My host.               |die-hard CP/M
North Highlands, CA   |(1) !pacbell!sactoh0!ijsys!ianj |addicts left on this
[phone]   95660|(2) !pacbell!sactoh0!ianj       |planet"

------------------------------

End of INFO-CPM Digest V90 Issue #8
***********************************
17-Jan-90 13:22:54-MST,10061;000000000000
Return-Path: <[e-mail]>
Date: Wed, 17 Jan 90 13:18:47 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #9
To: [e-mail]

INFO-CPM Digest             Wed, 17 Jan 90       Volume 90 : Issue    9

Today's Topics:
                           How NZCOM Works
                            IBM PC kermit
                                Kermit
                            MAKE for CP/M?
                            NEC V20 / CPM
                      ToolBoxes for Turbo Pascal
                          ZCPR33 vs. ZCPR34?
----------------------------------------------------------------------

Date: Wed, 17 Jan 90 10:09:31 EST
From: [e-mail]
Subject: How NZCOM Works

Ian Justman commented:

>> ... and don't understand how NZCOM works, nor can I presently
>> afford it.  So, I would like to know how that works, too...

That matter is dealt with in the same issue of TCJ that covers the new
features in ZCPR34.

P.S.  Come on guys!  There is a great magazine out there, The Computer
Journal, that is the only one left catering to 8-bit computer hobbyists.
If you don't support it, then there will be none, and all of you will
complain about the lack of support for CP/M.  A subscription is only
$16 for a year (US, 6 issues), and Sage Microsystems East will even pay
the first $2 on new subscriptions.  Probably about 95% of all the questions
I get about Z-System have been answered in TCJ articles in columns by me,
Bridger Mitchell, and the other Z-System developers.

------------------------------

Date: Wed 17 Jan 90 14:53:11-EST
From: John C Klensin <[e-mail]>
Subject: IBM PC kermit
Message-ID: <[e-mail]>

Most of the IBM PCs in the world run PCDOS of some flavor.  The current
MSDOS kermit (2.30 or 3.0) will run with PCDOS 2.1 or later if you have the
circa 256K of memory it needs.  For smaller or older machines or versions
of the OS, you are going to need a very early kermit.  I can paw throught
my floppy disks if necessary and try to find you one, and let you know.

IBM CP/M-86 Kermit has never been released, due to some difficulties in
shipping, communications problems in the USA, and the fact that it
represents a later release and compiler (with a few new features) than the
other CP/M-86 kermits.  Their maintainers weren't excited about putting the
new features and structure (really intended to support a native Concurrent
CP/M implementation) into their versions, and my collaborators and I have
never gotten adequately motivated, despite good intentions, to retrofit the
changes into the older version.  If you really need the thing, I can try to
send you a version, but this raises the other problem with CP/M-86 kermit,
and CP/M-86 generally, which is that, unlike CP/M-80, there is no standard
HEX format and LOAD/UNLOAD programs generally available.  And, because we
were never able to get recent versions of Concurrent to run on our
hardware, it is difficult for us to even read and copy the diskettes
now (it means booting CP/M-86 from floppies, then operating in a floppy-
only environment).

I *do* have diskettes containing a working version of IBM PC CP/M-86
kermit.  If you really need it, do you have suggestions for getting the
software to you?
    john klensin
    [e-mail]
-------

------------------------------

Date: 16 Jan 90 02:05:51 GMT
From: helios.ee.lbl.gov!hellgate.utah.edu!cc.utah.edu!cc.usu.edu![e-mail]  (Roger Ivie)
Subject: Kermit
Message-ID: <[e-mail]>

In article <[e-mail]>, [e-mail] (Kent Boortz) writes:
> Does anyone know where I can find the Kermit program for an old IBM? I think
> it is running CP/M-86 but I know very little about CP/M and all the
> documentation is gone. I have looked at the simtel kermit directory but
> I could not find any executables. Thanks in advance...
>

If you have easy access to BITNET, send the message "HELP" to
KERMSRV@CUVMA. This is the on-line repository for KERMIT, and they have
it for everything. For example, yesterday I picked up PDP-8 KERMIT for
my DECmate II. I am absolutely certain that they have CP/M-86 KERMIT,
since I have it for my Rainbow.

>
> By the way, is there a Tetris clone that I can run on this machine?

I've not seen Tetris for CP/M-86, but there are several DOS flavors.

--
===============================================================================
Roger Ivie

35 S 300 W
Logan, Ut.  84321
[phone]
===============================================================================

------------------------------

Date: 16 Jan 90 08:42:49 GMT
From: usc!samsung!munnari.oz.au!cluster!metro!ipso!stcns3![e-mail]  (Dave Horsfall)
Subject: MAKE for CP/M?
Message-ID: <[e-mail]>

No, this is not a joke.  Has anyone ported "make" for CP/M?  It would
have to be really simple, of course.  Ignore the (non-existent) time
stamps and just re-compile (or perhaps keep a simple data-base of
time stamps based on the file-modified bit?) etc.  Ignore the rules
about yacc/lex/whatever, and heaps of other shortcuts...

For the record, my C compiler supports execl()/execv(), as well as
spawnl(), spawnv() and spawnve(), (but not fork()/system() :-).
(Please don't ask for the compiler - it's commercial, and the author
probably reads this group.  I can supply details upon request though.)

Failing an existing product, I may take a stab at doing it myself.
Although constrained by 360k floppies (albeit with 64kb RAM disk) does
tend to severely limit one...

(Hmmm...  has anyone outside of Australia heard of the Microbee
computer, in its various incarnations?  Great little machine!)

Cheers, as they say "down-under".

PS - that dis-assembler was great!

--
Dave Horsfall (VK2KFU),  Alcatel STC Australia,  [e-mail]
[e-mail],  ...munnari!stcns3.stc.oz.AU!dave

------------------------------

Date: 17 Jan 90 08:47:41 GMT
From: sun-barr!ccut!ascgw!fgw!mfd!spad!sysrap![e-mail]  (Masahiro SEKIGUCHI)
Subject: NEC V20 / CPM
Message-ID: <[e-mail]>

From article <[e-mail]>,
    by [e-mail] (Roland Barenbrug):

> As far as I know the NEC V20 processor has the capability to
> execute Z80 (or 8080 ?) opcodes.

V20 executes all 8080 instructions but none of Z80's extension.

> Is there some program that supports
> these capabilities and e.g. realizes a CP/M environment on a MSDOS
> machine ?

There are.
I've seen two different free programs distributed in Japan.
--
    Masahiro Sekiguchi
    Architecture Dept., R&P Div., Fujitsu Limited
    [e-mail] (JUNET) -or- PDB01144 (NIFTY-Serve)

------------------------------

Date: 17 Jan 90 03:15:57 GMT
From: van-bc!ubc-cs!alberta!ccu![e-mail]  (Dave Rose)
Subject: ToolBoxes for Turbo Pascal
Message-ID: <[e-mail]>

After frustrating myself for several hours I realized that the reason that
a program I had wouldn't compile is because it was looking for some external
programs to "include". Now apparently these files are part of a Turbo Pascal
"toolbox". Now the source I am trying to compile is the ROSBBS, obtained from
the Simtel20 archives. Does anyone have these "toolbox" accessories, or at
least know where abouts I might obtain them?

Dave


--

Dave Rose                 :          Email - [e-mail]
10 Covent Rd.             : Local (Amdahl) - #[e-mail]
Winnipeg, Manitoba, Canada:

------------------------------

Date: Wed, 17 Jan 90 10:01:31 EST
From: [e-mail]
Subject: ZCPR33 vs. ZCPR34?

William Thomas Daugustine asked:

>> Altho I do use NZ-COM (ZCPR34), I have some questions regarding it
>> and the differences from ZCPR33.  About the only difference I know
>> of is that NZCOM is an auto-installing version of ZCPR33. What other
>> differences are there?

   You should take a look at the files containing my columns from The
Computer Journal (names like TCJ##.WZ -- and you should subscribe!).
I do not remember the issue (perhaps #38), but I covered this subject
in detail in one of them, the one in which NZCOM was first announced.
ZCPR34 is not the same as ZCPR33; it is the next revision.  The command
processor in NZCOM is the same command processor that can be installed
manually from the ZCPR34 source code, which is available to those who
insist on doing a manual installation.

   Unfortunately, after more than a year, I can no longer remember what
all the differences were.  One is that Z34 can handle type-4 programs,
those that are fully relocatable.  Type-3 programs, introduced with
Z33, load to a fixed address but one that may differ from 100H (a typical
address is 8000H).  Type-4 programs typically load as high in memory as
possible in the given configuration.  This address is automatically adjusted
for the system size and for the presence of RSXs (resident system extensions)
such as ZEX.

   With Z34 support was added for the new environment data that includes
a complete map of which drives are supported.  MAXDR (max drive) alone
can not cover cases such as drives A, B, F, and G.  Setting MAXDR to G
left the system open to getting hung up if drive C was accessed.  The new
Z3ENV also has the addresses and sizes of the CCP, DOS, and BIOS (starting
address only).  This paves the way for advanced command processors and
DOSs that are larger than those prescribed by CP/M.

   These are the main points, but my recollection is that the TCJ article
mentioned a total of four new features.

-- Jay Sage

------------------------------

End of INFO-CPM Digest V90 Issue #9
***********************************
18-Jan-90 14:19:39-MST,10534;000000000000
Return-Path: <[e-mail]>
Date: Thu, 18 Jan 90 14:15:09 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #10
To: [e-mail]

INFO-CPM Digest             Thu, 18 Jan 90       Volume 90 : Issue   10

Today's Topics:
                            BMC OKI If-800
        IBM bus to SCSI adaptor//IOMEGA controller transplant
                        INFO-CPM Digest V90 #9
                            MAKE for CP/M?
         Newcomer questions (emacs, C compiler, libc, books)
    Termcap entry for Kermit-80 needed (generic version) (2 msgs)
                      ToolBoxes for Turbo Pascal
----------------------------------------------------------------------

Date: 17 Jan 90 10:38:54 GMT
From: mcsun!unido!sbsvax![e-mail]  (c/o Peter Gaal)
Subject: BMC OKI If-800
Message-ID: <[e-mail]>

Hallo !

I found a computer called BMC OKI IF-800-20.

I think it`s a CPM machine, but i have no manual or other informations.
I have no system disk , too.
Could someone help me ?


Thanks




***********************************************************************
*                          +                                          *
* Ralf-Henning Glomb       +     Love glider pilots                   *
* Dorfstrasse 4            +     we need more of them                 *
* D - 5190 Stolberg        +                                          *
* (West -Germany)          +                                          *
* ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*
* !!!!!!!!!!! CAUTION !!!!!!! CAUTION !!!!!!!!!! CAUTION !!!!!!!!!!!!!*
* !!!!                                                           !!!!!*
* !!!!  For mailing, ONLY use the following adress :             !!!!!*
* !!!!                                                           !!!!!*
* !!!!  [e-mail]            !!!!!*
* !!!!                                                           !!!!!*
* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*
***********************************************************************

------------------------------

Date: 16 Jan 90 22:38:33 GMT
From: ingr![e-mail]  (Phil Johnson)
Subject: IBM bus to SCSI adaptor//IOMEGA controller transplant
Message-ID: <[e-mail]>

The original IOmega boxes were SASI interfaces, but IOmega changed to SCSI
several years ago.

The SASI interface is indeed the predecessor of SCSI, but they are not
compatible.




--
Philip E. Johnson                    UUCP:  usenet!ingr!b3!sys_7a!phil
MY words,                           VOICE:  [phone]
MY opinion!

------------------------------

Date: Thu, 18 Jan 90 09:32:16 CST
From: Rob Caton <[e-mail]>
Subject: INFO-CPM Digest V90 #9
Message-ID: <[e-mail]>

>Subject: NEC V20 / CPM
>
>> Is there some program that supports
>> these capabilities and e.g. realizes a CP/M environment on a MSDOS
>> machine ?
>
>There are.
>I've seen two different free programs distributed in Japan.
>--

There are a few emulators available on Simtel20, under <msdos.emulators>.
I have the 8080 emulator and the Z80 emulator, and have had no problems yet!
They are V2080J88.arc and ZRUN321.ARC.

Rob Caton
Programmer/Analyst
Washington University
>------------------------------

------------------------------

Date: 17 Jan 90 22:21:15 GMT
From: zephyr.ens.tek.com!wrgate!copper![e-mail]  (Michael D. Kersenbrock)
Subject: MAKE for CP/M?
Message-ID: <[e-mail]>

Yes, I did quite some years ago.  It had to jump thorough some hoops to
work properly (esp. for it to terminate when a module had a compile
error).

> It would
>have to be really simple, of course.  Ignore the (non-existent) time

Why?  My "base" for my port was one posted (from Australia) for some
odd (for here) version of UNIX.  It ran under CP/M pretty much the
same as one does for UNIX.

>stamps and just re-compile (or perhaps keep a simple data-base of
>time stamps based on the file-modified bit?) etc.  Ignore the rules
>about yacc/lex/whatever, and heaps of other shortcuts...

One thing though: mine WAS for CP/M 3.0 ("CP/M Plus") with time
stamps supported.  If the CP/M 3.0 timestamp "call" were implemented
under some other CP/M (using a OS-call filter, I forget the CP/M term),
then it'd work as-is.

>For the record, my C compiler supports execl()/execv(), as well as
>spawnl(), spawnv() and spawnve(), (but not fork()/system() :-).
>(Please don't ask for the compiler - it's commercial, and the author
>probably reads this group.  I can supply details upon request though.)

Mine was built using the Aztec C II compiler.  My mechanism was to build
a .BAT file with the suitable "command-lines", then chain to that file.

>
>Failing an existing product, I may take a stab at doing it myself.
>Although constrained by 360k floppies (albeit with 64kb RAM disk) does
>tend to severely limit one...

I had 1.2 MB floppies and 1Meg of DRAM (mostly disk cache).  The floppy size
might hurt things if your compiler is big....

>
>(Hmmm...  has anyone outside of Australia heard of the Microbee
>computer, in its various incarnations?  Great little machine!)
>
>Cheers, as they say "down-under".
>
>PS - that dis-assembler was great!
>
>--
>Dave Horsfall (VK2KFU),  Alcatel STC Australia,  [e-mail]
>[e-mail],  ...munnari!stcns3.stc.oz.AU!dave


I had my "make" put into the Simtel CP/M archive (probably under CPM3).
It'd be a good starting point if you can't upgrade to CP/M 3.0 nor
write something to "fake" CP/M 3.0's "standard" timestamp call.
I might have it at home as well.  The old beast is gathering dust....

Mike Kersenbrock WB4IOJ
Tektronix Microprocessor Development Products
[e-mail]
Aloha, Oregon
--
Mike Kersenbrock
Tektronix Microprocessor Development Products
[e-mail]
Aloha, Oregon

------------------------------

Date: 18 Jan 90 16:35:05 GMT
From: [e-mail]  (Bennett Todd)
Subject: Newcomer questions (emacs, C compiler, libc, books)
Message-ID: <[e-mail]>

I just recently bought a TRS-80 Model 4P. That confession doesn't come
easy; this perverse act has really estranged me from many folks around
here who aren't keen on older technology:-).

Does anybody have a teeny weenie editor that feels sorta like an EMACS
for this critter (or more generally for CP/M in general)?

What C compiler(s) are recommended for this beastie? If I can't get a
tiny emacs-style editor from someone else my next attempt is going to be
to port ELLE.

Does anybody have something like unto a PD useable subset of libc.a for
CP/M? One of those would bring the goal closer into reach, given the
availability of Small-C (which I would be willing to try and hack ELLE
into) or the possibility of back-ending gcc for the Z80 (as a
cross-compiler only, obviously).

I should remark that this is running Montezuma CP/M 2.2.

(P.S. Thanks to the folks who responded to my plea for help getting
CP/M; it turns out I found someone who lives rather near me who had what
I needed).

Also, does anybody have favorite books to recommend for (1) CP/M
architecture and systems programming, and (2) Z80 machine/assembler?

Thanks!

-Bennett
[e-mail]

------------------------------

Date: 18 Jan 90 16:23:39 GMT
From: tank!cps3xx!netnews.upenn.edu!scotty.dccs.upenn.edu![e-mail]  (Anthony Olejnik)
Subject: Termcap entry for Kermit-80 needed (generic version)
Message-ID: <[e-mail]>

I need a termcap entry for the generic version of Kermit80 for CPM.
My CPM system (Digilog S-1000) is not supported fully in the
Kermit distribution.

I did, however, get the generic implementation of Kermit up and
running on it. But I can't get EMACS to work properly with this
generic version.  EMACS needs a pretty smart terminal to run (like
a VT100).  I've tried using the termcap for ADM3A, but still had
problems with KERMIT80.

Any help would be greatly appreciated.

Thanks in advance.

--tony olejnik
  University of Pennsylvania
  Data communications and Computing Services
  [e-mail]


------------------------------

Date: 18 Jan 90 18:42:17 GMT
From: snorkelwacker!usc!jarthur!polyslo![e-mail]  (Mike Jarvis)
Subject: Termcap entry for Kermit-80 needed (generic version)
Message-ID: <[e-mail]>

In article <[e-mail]> [e-mail] (Anthony Olejnik) writes:
>I need a termcap entry for the generic version of Kermit80 for CPM.
>My CPM system (Digilog S-1000) is not supported fully in the
>Kermit distribution.

I've seen a lot of requests for Kermit (why?  I have no idea)  so I thought
I'd go ahead and post an anonymous ftp site which is dedicated to the lousy
thing....it has every version ever made and complete updates and info....

 ftp WATSON.CC.COLUMBIA.EDU

Have fun!

------
Mike Jarvis
Favorite quote of 1990 to date -- "CP/M?  What's that,...a mainfraim?"
(I just smiled)

------------------------------

Date: 18 Jan 90 13:39:40 GMT
From: ucsdhub!hp-sdd!ncr-sd!ncrlnk!ncrwic!encad!entec![e-mail]  (Brian Lair)
Subject: ToolBoxes for Turbo Pascal
Message-ID: <[e-mail]>

In article <[e-mail]>, [e-mail] (Dave Rose) writes:
>
>                        Now apparently these files are part of a Turbo Pascal
> "toolbox". Now the source I am trying to compile is the ROSBBS, obtained from
> the Simtel20 archives. Does anyone have these "toolbox" accessories, or at
> least know where abouts I might obtain them?

I ordered "Turbo Toolbox" directly from Borland a few years ago.  They then
cost about $50, I think.  I don't know if they still sell them.  I used the
software to develop a simple address book program, which is still serving
me well.  We also bought the toolbox here at work and used it for a while,
but had a lot of problems with the database files getting corrupted.

------------------------------

End of INFO-CPM Digest V90 Issue #10
************************************
20-Jan-90 05:21:43-MST,10290;000000000000
Return-Path: <[e-mail]>
Date: Sat, 20 Jan 90 05:15:16 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #11
To: [e-mail]

INFO-CPM Digest             Sat, 20 Jan 90       Volume 90 : Issue   11

Today's Topics:
                       Compupro manuals wanted
        IBM bus to SCSI adaptor//IOMEGA controller transplant
                            MAKE for CP/M
                            NEC V20 / CPM
         Newcomer questions (emacs, C compiler, libc, books)
                        PROGRAMMING NEWSLETTER
         Termcap entry for Kermit-80 needed (generic version)
----------------------------------------------------------------------

Date: 14 Jan 90 22:49:15 GMT
From: sndcsl.enet.dec.com![e-mail]  (Willie Smith 226-6121 13-Jan-1990 1946)
Subject: Compupro manuals wanted
Message-ID: <[e-mail]>

Path: sndcsl!smith
From: [e-mail] (Willie Smith)
Newsgroups: comp.os.cpm
Subject: Re: CompuPro documentation sought
Date: 13 JAN 90 19:38:53
Organization: Digital Equipment Corporation
Keywords:
Summary:
-Message-Text-Follows-

In article <[e-mail]>, [e-mail] (Marc Wilson) writes...
>I need to find documentation for the following S-100 boards.  I know how
>to set up a couple of them, but with no manuals, I'm still pretty much
>in the dark.
        [list of boards deleted]

Why not try Compupro?  I've got a few of the ones you want, but copying
them would take most of a day and you'd end up with bad copies...  You can
still buy them (as far as I know) from Compupro (well, Viasyn) and then you
get the real thing.

If I'm wrong and you  can't get them, write me and I'll see what I can do..


Willie Smith
[e-mail]
[e-mail]
{Usenet!Backbone}!decwrl!wookie.dec.com!w_smith
[".dec.com" may be replaced by ".enet.dec.com" in some or all of the above]

------------------------------

Date: 19 Jan 90 23:39:00 GMT
From: lectroid!cloud9!jjmhome!cpoint!frog![e-mail]  (John Woods)
Subject: IBM bus to SCSI adaptor//IOMEGA controller transplant
Message-ID: <[e-mail]>

In article <[e-mail]>, [e-mail] (Phil Johnson) writes:
> The original IOmega boxes were SASI interfaces, but IOmega changed to SCSI
> several years ago.
>
> The SASI interface is indeed the predecessor of SCSI, but they are not
> compatible.
>
This depends on what kind of demands you make upon the controllers.
Here we use SCSI devices from SASI host adaptors (and vice versa) with
great success.  The SCSI bus is certainly a wild and improper superset of
SASI, but the ancestry shows through quite strongly.
--
John Woods, Charles River Data Systems, Framingham MA, [phone]
...!decvax!frog!john, [e-mail], ...!mit-eddie!jfw, [e-mail]

Happiness is Planet Earth in your rear-view mirror.    - Sam Hurt

------------------------------

Date: Fri, 19 Jan 90 11:26:56 EST
From: [e-mail]
Subject: MAKE for CP/M

Dave Horsfall asked about a MAKE utility for CP/M.  There is one posted on
my Z-Node (617-965-7259, password = DDT) called RCPMKE13.LBR.  Here is the
entry in the FOR file:

----
RCPMKE13.LBR - ZCPR33 Specific
   RCPMKE13 is MAKE.RCP version 1.3.  MAKE is modeled on the
   Unix MAKE.  It runs as an ZCPR33 RCP, schedules source files for
   assembly/compilation and then monitors the assembly/compilation
   process, aborting if errors are detected.  It's superior to the
   FINDERR method in that multiple-pass compilers with overlays are
   supported ( PL/I ), or any compiler that overwrites the error
   location prior to warm booting.  See MAKE.DOC

----

As you will notice, however, the above program will work only in a modern
Z-System (ZCPR33 or later).

Dave commented further:

>> No, this is not a joke.  Has anyone ported "make" for CP/M?  It would
>> have to be really simple, of course.  Ignore the (non-existent) time
>> stamps and just re-compile (or perhaps keep a simple data-base of time
>> stamps based on the file-modified bit?) etc.

   What is this about "non-existent time stamps"?  If you use DateStamper or
any of the modern DOS replacements (of which there are now quite a few:
P2DOS, Z80DOS, NOVADOS, ZSDOS/ZDDOS, etc.), those time stamps would not be
"non-existent".  And I believe that there was version of MAKE available with
DateStamper that would do just what the standard Unix MAKE does.  I have
never been interested in any of this myself and have not tried it, but you
might try dropping Bridger a line at BRIDGER @ RAND.ORG.

-- Jay Sage


------------------------------

Date: 19 Jan 90 01:05:49 GMT
From: pacific.mps.ohio-state.edu!zaphod.mps.ohio-state.edu!usc!cs.utexas.edu!hellgate.utah.edu!cc.utah.edu!cc.usu.edu![e-mail]  (Roger Ivie)
Subject: NEC V20 / CPM
Message-ID: <[e-mail]>

In article <[e-mail]>, [e-mail] (Masahiro SEKIGUCHI) writes:
>> Is there some program that supports
>> these capabilities and e.g. realizes a CP/M environment on a MSDOS
>> machine ?
>
> There are.
> I've seen two different free programs distributed in Japan.

UniDOS, put out by the people that do Uniform, can run CP/M on a V20.
It also has a Z80 interpreter mode for ppl without a V20. But, most
excitingly, they also sell an 8 MHz Z80 coprocessor; it's very
fast, uses the DOS file structure, and runs almost all of my CP/M
stuff--even the disk sector editors!!!

===============================================================================
Roger Ivie

35 S 300 W
Logan, Ut.  84321
[phone]
===============================================================================

------------------------------

Date: 18 Jan 90 22:06:09 GMT
From: csusac!mmsac![e-mail]  (Jim Lips Earl)
Subject: Newcomer questions (emacs, C compiler, libc, books)
Message-ID: <[e-mail]>

> Also, does anybody have favorite books to recommend for (1) CP/M
> architecture and systems programming, and (2) Z80 machine/assembler?

I like "Mastering CP/M" by Alan R. Miller, published by SYBEX.

I've got two "regular" Model 4's, and I run Mont. Micro CP/M
exclusively.  None of this TRASHDOS stuff.  I also run a BBS on it,
with the overlays on the RAMDISK for fast loading.  Does the 4P have
the RAMDISK?

I use BDS C as my C compiler.  It compiles and runs fast, but
doesn't support every "standard C" function.  It is very inexpensive.

--
      Jim "Lips" Earl             UUCP: ucbvax!ucdavis!csusac!mmsac!jim
          KB6KCP              INTERNET: mmsac![e-mail]
   =======================================================================
                  The opinions stated herein are all mine.

------------------------------

Date: 18 Jan 90 06:42:00 GMT
From: swrinde!cs.utexas.edu!mailrus!jarvis.csri.toronto.edu!utgpu!utzoo!mnetor!tmsoft!masnet!canremote![e-mail]  (NIGEL ALLEN)
Subject: PROGRAMMING NEWSLETTER
Message-ID: <[e-mail]>

      A.K. Dewdney, Computer Recreations columnist with Scientific
American magazine, has launched a personal programming newsletter,
Algorithm. The new publication is aimed at amateur and professional
programmers alike. It extends the Computer Recreations tradition of
recreational and educational programming projects: the Mandelbrot set,
cellular automata, chaos and dynamics, weird machines, stellar
simulation, puzzles and many other topics.

      The new publication carries seven features and will expand to
include
more columns. Currently, it includes Algoletter, advice from
professionals; Easy Pieces, fascinating projects for beginning
programmers by Michael Ecker of Creative Computing fame; Personal
Programs, exercises for more advanced programmers by Cliff Pickover,
IBM's computer graphics wizard; Algopuzzles, computer mind-benders by
Dennis Shasha, author of The Puzzling Adventures of Dr. Ecco; Algofact
and
Algofiction, invited articles and stories from well-known scientists and
authors. A Bulletin Board advertises hosts of recreational products by
individuals and small companies.

      Algorithm puts the "personal" back in "personal computing" by
encouraging you to develop your programming skills while pursuing high
adventure on the frontiers of science and computing. Order a free
examination copy by writing Algorithm at P.O. Box 29237, Westmount
Postal Outlet, 785 Wonderland Road, London, Ontario, Canada N6K 1M6.
---
 * Via ProDoor 3.1R

------------------------------

Date: 18 Jan 90 22:54:33 GMT
From: pacbell!sactoh0![e-mail]  (Ian R. Justman)
Subject: Termcap entry for Kermit-80 needed (generic version)
Message-ID: <[e-mail]>

In article <[e-mail]>, [e-mail] (Anthony Olejnik) writes:
>
> I did, however, get the generic implementation of Kermit up and
> running on it. But I can't get EMACS to work properly with this
> generic version.  EMACS needs a pretty smart terminal to run (like
> a VT100).  I've tried using the termcap for ADM3A, but still had
> problems with KERMIT80.

You might consider looking at QTERM which has VT100 emulation.  A
friend of mine uses it locally on his TRS-80 model 4 using EMACS.
It's a pretty small, nice, and powerful program, with split screen,
practically all the flavors of Xmodem, plus it has Kermit, so it's
an ideal program to call mainframe systems.  And it has one of the
most powerful chat script languages I have ever used.  The newer
version (I'm beta testing it) has an even MORE powerful chat script
language.
--
Home:   Ian Justman   |UUCP:(1) My CP/M machine.       |"One of the few
6612 Whitsett Drive   |     (2) My host.               |die-hard CP/M
North Highlands, CA   |(1) !pacbell!sactoh0!ijsys!ianj |addicts left on this
[phone]   95660|(2) !pacbell!sactoh0!ianj       |planet"

------------------------------

End of INFO-CPM Digest V90 Issue #11
************************************
23-Jan-90 23:18:56-MST,9058;000000000000
Return-Path: <[e-mail]>
Date: Tue, 23 Jan 90 23:15:06 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #12
To: [e-mail]

INFO-CPM Digest             Tue, 23 Jan 90       Volume 90 : Issue   12

Today's Topics:
                                 CP/M
                   Determining disk space in BASIC
                       Eagle IV software search
                            MAKE for CP/M?
                          NetHack for CP/M?
                      PD Software for SuperBrain
                       VT-180 for free (sorta)
----------------------------------------------------------------------

Date: Tue, 23 Jan 90 20:49 MET
From: Noldus Information Technology bv <[e-mail]>
Subject: CP/M

Ref: CP/M

Dear moderator,

Can you please add the following message to the CP/M mailing list?
Or maybe you can answer the question at once.

Thanks in advance.

Lucas Noldus ([e-mail])

===============================================

I would like to know if there is a possibility to determine the number of
free bytes on a disk from inside a BASIC program on a CP/M computer.
The type of computers I am talking about are three types of portable
computers: Epson PX-4, Epson PX-8 and Husky Hunter. Further, the type of disk
I mean is a RAM disk.

The CP/M command STAT performs this function but (1) it cannot be issued from
inside BASIC, and (2) STAT produces information on the screen that I don't
want. However, STAT must be using some kind of CP/M service call and I would
like what kind of call or machine code routine that is. The manual of the
Epson PX-8 includes a list of BIOS services, but none of those concerns disk
space. The BASIC function FRE() returns the amount of free RAM but that's not
what I want. I need the number of bytes available for file storage.

Does anybody know how to do this? Any suggestion is welcome! Thanks in
advance.


        Lucas Noldus, Ph.D.
        Wageningen, The Netherlands
        [e-mail]


------------------------------

Date: Tue, 23 Jan 90 20:49 MET
From: Noldus Information Technology bv <[e-mail]>
Subject: Determining disk space in BASIC
Message-ID: <[e-mail]>

I would like to know if there is a possibility to determine the
number of free bytes on a disk from inside a BASIC program on a CP/M
computer.  The type of computers I am talking about are three types of
portable computers: Epson PX-4, Epson PX-8 and Husky Hunter. Further,
the type of disk I mean is a RAM disk.

The CP/M command STAT performs this function but (1) it cannot be
issued from inside BASIC, and (2) STAT produces information on the
screen that I don't want. However, STAT must be using some kind of
CP/M service call and I would like what kind of call or machine code
routine that is. The manual of the Epson PX-8 includes a list of BIOS
services, but none of those concerns disk space. The BASIC function
FRE() returns the amount of free RAM but that's not what I want. I
need the number of bytes available for file storage.

Does anybody know how to do this? Any suggestion is welcome! Thanks in
advance.


        Lucas Noldus, Ph.D.
        Wageningen, The Netherlands
        [e-mail]

------------------------------

Date: 22 Jan 90 14:58:08 GMT
From: usc!zaphod.mps.ohio-state.edu!rpi!crdgw1!ge-dab!peora!tarpit!myoho!alfred![e-mail]  (Elliot Dierksen)
Subject: Eagle IV software search
Message-ID: <[e-mail]>

I am looking for either a communications program or free standing error
checking file transfer program for an Eagle IV. Inexpensive and on Eagle
diskettes. I just want to get some data off this Eagle before I junk it. I
want to get this data transfered to IBM/PC format. If anyone has any sources
for this or alternative suggestions, I would appreciate it very much. Any
advise on serial transfers without error checking would also be interesting.

Thanx,

EBD
--
Elliot Dierksen        "I don't care if my lettuce has DDT on it,
                        as long as it's crisp!!" -- Jorma Kaukonen
Work) {att,codas}!candi!fang!ebd                      [phone]
Home) {peora,uunet,ucf-cs}!tarpit!alfred!elliot       [phone]

------------------------------

Date: 20 Jan 90 00:05:42 GMT
From: hpda!hpcuhb!hpcllla!hpclisp!hpsjtjb![e-mail]  (Tim Brengle)
Subject: MAKE for CP/M?
Message-ID: <[e-mail]>

Well, back when I was hacking on ADL more actively, I took Mike's MAKE and
converted it to run under CP/M 2.2 and BDS C versio 1.50a.  It used the archive
bit as a change indicator and worked just fine.

Later I changed it a bit so that it would work under C/NIX.  I couldn't find a
reasonable way to exec C/NIX's shell so I had it write a text file which could
then be run explicitly.

Send e-mail if you'd like me to try to get source and/or executables together.

Tim Brengle    [e-mail]    ...!hplabs!hpsjtjb!brengle

------------------------------

Date: 23 Jan 90 00:03:32 GMT
From: portal!cup.portal.com![e-mail]  (William Thomas Daugustine)
Subject: NetHack for CP/M?
Message-ID: <[e-mail]>

     Is  it  possible  (or has it already  been  done?)  to  port
NetHack to CP/M?
     I talked to a couple of people already about this, but  have
gotten  no straight answers... They were the kind of  people  who
refuse to belive that CP/M is still being used today...
     Anyways,  some  good  points were brought up.  I  dont  have
experence with it firsthand, but I was told that NetHack takes  a
meg  of RAM. In a 64k environment, that sounds daunting, but  for
one  thing, overlays can be used. Heck, theyre used all the  time
(take a look at WS4 and ZMP). So, only the 'core' need be running
in  RAM  at  one  time, while it pulls what  it  needs  from  the
overlay(s). Of couse, a hard disk would be needed...
     Another  was the 'non-standardness' of CP/M machines. I  see
that a port to MS-DOS exists, and MS-DOS uses quite a few of  the
same  calls  that CP/M has (MS-DOS Int 21h for the most  part  is
similar  to the BDOS). Things like termcap are no  problem,  ZCPR
users  already have that figured out, and CP/M users should  know
what  their  terminal  emulates (it seems that quite  a  few  are
TeleVideo and Lear-Siegler (sp) compatable)
     About  the only BIG problem I can really see is things  like
the BIOS, and that shouldnt be a problem, either. An extra header
file can define all the needed machine dependant stuff.

     Is  it possible? Or am I looking at something thats  just  a
pipe-dream?

|----------------------------------------------------------------|
| Billy D'Augustine          [phone] | The author is not   |
| [e-mail]                | responsable for     |
| sun!portal!cup.portal.com!Azog-Thoth     | typgraphic errors!  |
|----------------------------------------------------------------|

------------------------------

Date: 22 Jan 90 14:44:41 GMT
From: haven!vrdxhq!dev!dgis![e-mail]  (Timothy Swenson)
Subject: PD Software for SuperBrain
Message-ID: <[e-mail]>

    I am looking for some Public Domain software
for my SuperBRain II.  I am interested in Languages(
Pascal and C) and other utility programs.
    I have tried software from other CP/M machines, but
they do not seem to run right.
    Hope some one can find me some.  Thanks in advance.

        Tim Swenson

    [e-mail]

------------------------------

Date: 16 Jan 90 03:09:41 GMT
From: adobe![e-mail]  (Ross A. Jeynes)
Subject: VT-180 for free (sorta)
Message-ID: <[e-mail]>

Hi folks,

I've got a perfectly good DEC VT-180 sitting around that I will probably
never use again.  (This is a VT-100 terminal with a CP/M board, essentially)
It has:
    Four 5 1/4" disk drives
    64 K
    Lots of software (with documentation :-), including:
        C compiler (Mix C)
        Turbo Pascal
        Word Processor
        dBase II
        Statistical analysis software
        Multiplan (spreadsheet)
        Basic
        ...more stuff I can't think of right now

I would like to find someone with whom I can swap my CP/M boards in the
VT-180 for a set of VT-125 boards, or a VT-102 board (the former is obviously
perferred.)

So, If you have a VT-102 or VT-125 that you would be willing to swap boards
from, send me email ([e-mail]) or call me ([phone]), and we
can discuss logistics.  (I don't want to charge anything for the computer,
but it would be nice if you paid the shipping for it.)

-Ross Jeynes            Developer Support        Adobe Systems Incorporated

------------------------------

End of INFO-CPM Digest V90 Issue #12
************************************
25-Jan-90 21:19:28-MST,9899;000000000000
Return-Path: <[e-mail]>
Date: Thu, 25 Jan 90 21:15:12 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #13
To: [e-mail]

INFO-CPM Digest             Thu, 25 Jan 90       Volume 90 : Issue   13

Today's Topics:
                     CDC replacement disk drives?
        Finding documentation for SELECT (cp/m word processor)
                           make for CP/M 80
                        SIMTEL20 shell script
                     Will swap Kaypro 4/83 for ??
                            Z80MU (2 msgs)
----------------------------------------------------------------------

Date: Thu, 25 Jan 90 9:14:36 EST
From: "Paul V. Pullen" <[e-mail]>
Subject: CDC replacement disk drives?
Message-ID: <[e-mail]>

Does anyone out there know where I can either obtain replacement floppy disk
drives (CDC 9408 DSDD drives from an Intertec Compustar VPU-30) or get the
malfunctioning disk repaired?  The Intertec drawings call out CDC 9408/9409,
and the drive itself has a Magnetic Peripherals  Part number 77680001 and
equipment identification number BR8B1A on the plate at the rear of the drive.

I have 7 of these Intertec units using this drive at this location, and I know
I will need more disk drives in the future.  These have been running flawlessly
for approximately 9 years, and I hope to keep them in operation in the future.

Thanks for your assistance!

                Paul Pullen

--------------------------------------------------------------------------------
               ____    _____          _____    _____    _____    _____    _____
    /    /   /    /   /    /         /    /   /    /   /    /   /    /   /    /
   /    /   /        /    /         /        /    /   /    /   /        /
  /    /   /----/   /----/         /        /----    /    /   /--      /
 /    /        /   /    /         /    /   /  \     /    /   /        /    /
/____/   /____/   /    /         /____/   /    \   /____/   /____/   /____/

United States Army Chemical Research, Development and Engineering Center

[e-mail]

Snail Mail:  Commander
         USA-CRDEC
         Attn: SMCCR-PPI (Pullen) E-5604
         Aberdeen Proving Grounds,
                              Maryland  21010-5423

AT&T           [phone]
           [phone]
-----------------------------------------------------------------------------

------------------------------

Date: 25 Jan 90 19:30:21 GMT
From: orion.oac.uci.edu![e-mail]  (Steve Wooldridge)
Subject: Finding documentation for SELECT (cp/m word processor)
Message-ID: <[e-mail]>

A friend of mine recently got an old Xerox 820 computer with SELECT,
a word processor (version 01.04). The tutorial is fairly good, but does
anyone know where I might get some documentation on using the word
processor? This my friends very first intro to computers and she finds
it frustrating to try to remember all of the commands from memory. (She
got the program on disk but no written materials).

Thanks for any assistance.

------------------------------

Date: 25 Jan 90 04:49:52 GMT
From: [e-mail]  (Dr. Ted Carnevale)
Subject: make for CP/M 80
Message-ID: <[e-mail]>

Recently there were some postings requesting info about or bemoaning
the lack of date stamps and make utility under CP/M 2.2.
As Jay Sage pointed out, DateStamper provides a very functional
date stamping mechanism.  Furthermore, it comes with (or perhaps this
has to be requested additionally--it's been quite a while since I got
my copy) an implementation of make that knows how to use its date
stamps.  Not the same as UNIX make, perhaps, but much better than
nothing.  Sage Microsystems East used to (still does?) sell it--
phone [phone], addr 1435 Centre St., Newton Centre, Mass.02159-2469.
I bought my copy directly from Plu*Perfect Systems, but can't locate
their addr or phone # at the moment.

I have no commercial interest in Sage Microsystems or Plu*Perfect Systems,
just another satisfied customer.

------------------------------

Date: 25 Jan 90 08:38:27 GMT
From: pacbell!sactoh0![e-mail]  (Ian R. Justman)
Subject: SIMTEL20 shell script
Message-ID: <[e-mail]>

I thought I would pass this little thingie along for those wanting
to get files from SIMTEL20.  In order to get the directory, you
have to mail a request according to the helpfiles that have been
posted here from time to time.  BTW, I didn't write this file;
someone else did, a friend of mine with access to an MS-DOS machine
gave me a copy of the shell script and I modified it to suit my
needs.  As it stands, it sends files to my system.  You have to
modify it so it knows where you want your files to go, and how to
get to the list server.

Enjoy!!!!  (Or at least try...)

--------------Cut, chop, slash, lacerate, or whatever, here-------
#-------- BEGIN -----------------
# 'file' is location of a temporary file
file=/usr/tmp/simreq
# 'me' is my mail address
me=ames!pacbell!sactoh0!ijsys!ianj
# 'listserv' is address of list server
listserv=ames!vm1.nodak.edu!listserv
# print help if they goofed
if (test "$#" -ne "3")
  then
    echo "USAGE: getsimtel <disk> <directory> <filename>"
    echo
    echo "EXAMPLE: getsimtel pd1 msdos.filedocs simibm.arc"
    exit
fi
echo "Processing SIMTEL request . . . . please wait a minute."
echo
echo "/PDGET MAIL $1:<$2>$3 ( UUENCODE" > $file
# mail our request, 'fastmail' from ELM product
fastmail -r $me -F $me -s Request $file $listserv
echo "getsimtel done"
echo
echo "SIMTEL request sent. Please wait a day or so for receipt."
rm $file
#--------- END --------------------------
--
Home:   Ian Justman   |UUCP:(1) My CP/M machine.       |"One of the few
6612 Whitsett Drive   |     (2) My host.               |die-hard CP/M
North Highlands, CA   |(1) !pacbell!sactoh0!ijsys!ianj |addicts left on this
[phone]   95660|(2) !pacbell!sactoh0!ianj       |planet"

------------------------------

Date: 25 Jan 90 04:50:41 GMT
From: zaphod.mps.ohio-state.edu!usc!polyslo![e-mail]  (Mike Jarvis)
Subject: Will swap Kaypro 4/83 for ??
Message-ID: <[e-mail]>

I have a Kaypro 4/83 that I would be willing to trade for a 2meg or
bigger ramdisk for a Kaypro 4/84....OR the for boards needed to put a
hard drive into my 4/84. (or make an interesting offer!)

I am interested in making a ramdisk or the boards for a hard drive myself.
What books could I use for this?

If you want to swap a ramdisk, I have a 256K SWP ramdisk/MSDOS coprocessor
I'll throw in with the 4/83.

What is the biggest Ramdisk available for the Kaypros?  How big can one go?
What is the limiting factor?

Mike
[e-mail]

------------------------------

Date: 24 Jan 90 20:26:53 GMT
From: csusac!mmsac!qmet![e-mail]  (Steve Croft)
Subject: Z80MU
Message-ID: <[e-mail]>

I have an old version of Z80MU, a Z80/CPM software emulation for PC-DOS.
I tried to get ahold of Computerwise Consulting in Virginia with no
luck.  Does anyone know what the last version is and if any work is
being done on future versions?  The executable is in the public domain..
is the source, also?

We find the program useful and would like to move it to unix, if we can
get the code.

Steve Croft
--
******************************************************************************
*   If what I say is not correct,    *      Steve Croft, Qualimetrics, Inc.  *
*       then it's not what I meant!  *      (ucbvax!ucdavis!csusac!qmet!sc)  *
******************************************************************************

------------------------------

Date: 25 Jan 90 18:36:30 GMT
From: att!cbnews![e-mail]  (Larry A. Shurr)
Subject: Z80MU
Message-ID: <[e-mail]>

In article <[e-mail]> [e-mail] (Steve Croft) writes:
}I have an old version of Z80MU, a Z80/CPM software emulation for PC-DOS.
}I tried to get ahold of Computerwise Consulting in Virginia with no
}luck.  Does anyone know what the last version is and if any work is
}being done on future versions?  The executable is in the public domain..
}is the source, also?

There is a version 5.2a available.  It however, is payware: $150.00.
To here them tell it, the folks at Computerwise Consulting were severely
put upon by people demanding free support.  Frankly, I think that they
should have charged a nominal fee for the software and their usual fees
for consultation since they say that their problem was demands for
support.  However, I'm not they, so I don't know the whole story.

Since V3.10 suits my needs (used once in a blue moon and works fine), I
am not currently using V5.2a.  It'n not worth that kind of money for my
needs (your milage may vary).

They don't say anything about liscensing the source, but you don't
know until you ask.  I notice that their address is unchanged but they
seem to have a new phone:

        Computerwise Consulting Services
        P.O. Box 813
        McClean, VA 22101
        [phone]

I though that 3.10 was quite excellent and I don't understand why
people had any serious problems with it.

regards, Larry
--
Signed: Larry A. Shurr (cbema![e-mail] or att!cbema!las)
Clever signature, Wonderful wit, Outdo the others, Be a big hit! - Burma Shave
(With apologies to the real thing.  The above represents my views only.)
(You may now R'eply.  Forwarding from cbnews to my mail address now works!!!)

------------------------------

End of INFO-CPM Digest V90 Issue #13
************************************
27-Jan-90 23:42:47-MST,1796;000000000000
Mail-From: KPETERSEN created at 27-Jan-90 23:32:24
Return-Path: <[e-mail]>
Date: Sat, 27 Jan 90 23:32:23 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #14
To: [e-mail]

INFO-CPM Digest             Sat, 27 Jan 90       Volume 90 : Issue   14

Today's Topics:
                         Plu*Perfect Systems
                    Software for the C=128/Kaypro
----------------------------------------------------------------------

Date: Fri, 26 Jan 90 13:09:45 EST
From: [e-mail]
Subject: Plu*Perfect Systems

Dr. Ted Carnevale commented in a recent message:

>> I bought my copy directly from Plu*Perfect Systems, but can't locate
>> their addr or phone # at the moment.

Plu*Perfect Systems can be reached as follows:

     Bridger Mitchell ([e-mail])
     Plu*Perfect Systems
     410 23rd Street
     Santa Monica, CA 90402


------------------------------

Date: 26 Jan 90 12:01:00 GMT
From: deneb![e-mail]
Subject: Software for the C=128/Kaypro
Message-ID: <[e-mail]>

I have been looking for a long time for a copy of Borland's Turbo Pascal
3.0 with the Kaypro/C=128 patch for my C=128.  Borland stopped supporting
CP/M a few years back, and finding ANY of their software is getting more
and more difficult.  If you have a copy you can bear to part with (or a
copy of any of the supporting software, ie the ToolBox) please send mail to
[e-mail].

Also, on a more general note, does anyone know of any CP/M ftp sites
that still exist?

------------------------------

End of INFO-CPM Digest V90 Issue #14
************************************
31-Jan-90 10:27:56-MST,8808;000000000000
Return-Path: <[e-mail]>
Date: Wed, 31 Jan 90 10:15:20 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #15
To: [e-mail]

INFO-CPM Digest             Wed, 31 Jan 90       Volume 90 : Issue   15

Today's Topics:
                           compression help
                   program name under CP/M (2 msgs)
            Robin, games, particularly for young children
                            Sharp MZ-3500
                   Z100=cpm? Need startup software
                           Z100 = CPM? Yes.
                                Z80MU
----------------------------------------------------------------------

Date: Mon, 29 Jan 90 13:02:17 EST
From: "'Alex Bodnar Jr - [e-mail]'" <[e-mail]>
Subject: compression help
Message-ID: <[e-mail]>


i know this has been on the net before but ...... as murphy would have
it and i think its been a while since seeing it. what are used to un-
(crunch,squeeze,compress) the cpm files with a y in the suffix. *.?y?
i have downloaded the lzw.lbr from simtel20 and my nulu.com goes a
little crazy by adding all the files on the disk at the end of the
library and of course when opening the library it gives the CRC error
message. please advise. and THANK-YOU in advance.

alex bodnar
software engineering and development divion
aberdeen proving ground, maryland
KA3CIM

------------------------------

Date: 29 Jan 90 15:23:41 GMT
From: mcsun!unido!gmdzi![e-mail]  (Georg Wittig)
Subject: program name under CP/M
Message-ID: <[e-mail]>

Does there exist a standard way to determine the name of the current program
from within a program under CP/M PLUS?

For example, if my program is in file TEST.COM on drive b, does there exist a
CALL 5 or a specific address where I can find the string B:TEST.COM? The
FCB-Format would be acceptable, too.

And if I rename the program (without changing it), say to FOO.BAR, then I would
like to get the string B:FOO.BAR in the program.

I couldn't find a CALL 5 entry, nor do the addresses 0H - 0FFH contain that
information on my CP/M PLUS machine. :-|

But there *must* be a way to determine it, because the CCP displays the last
command (program) executed when I type Control-W. Where is the pointer to that
text?

Any ideas?
--
Georg Wittig   GMD-Z1.BI   P.O. Box 1240   D-5205 St. Augustin 1 (West Germany)
email: [e-mail]   phone: [phone]
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
"Freedom's just another word for nothing left to lose" (Kris Kristofferson)

------------------------------

Date: 30 Jan 90 09:10:03 GMT
From: mintaka!snorkelwacker!spdcc!merk!alliant!linus!nixbur!nixpbe!peun11![e-mail]  (Moellers)
Subject: program name under CP/M
Message-ID: <[e-mail]>

[e-mail] (Georg Wittig) writes:


>Does there exist a standard way to determine the name of the current program
>from within a program under CP/M PLUS?

[...stuff deleted...]

>I couldn't find a CALL 5 entry, nor do the addresses 0H - 0FFH contain that
>information on my CP/M PLUS machine. :-|

>But there *must* be a way to determine it, because the CCP displays the last
>command (program) executed when I type Control-W. Where is the pointer to that
>text?

I'm not sure about CP/M PLUS but my ZCPR33/Z-System works like this ...
As the CCP loads the program the same way as any other program would
load a file, it uses an FCB.
This FCB is located not in low core (0..ff) but rather somewhere in high
core (probably even above the CCP/BDOS/BIOS).
One trick might be to write a program which scans the entire memory for
it's own name (Call it AAAAAAAA.COM, look for 8 consecutive A's but
watch out for the command line buffer).
ZCPR33 has the address of this "external FCB" stored in it's
"environment descriptor" so you can just use a library function and
voila ... You know who You are (at least Your program knows who it is).

regards
Josef Moellers                      |    c/o Nixdorf Computer AG
 USA: uunet!philabs!linus!nixbur!mollers.pad  |    Abt. DX-PC
!USA: mcvax!unido!nixpbe!mollers.pad          |    Pontanusstr
Phone: [phone]              |    D-4790 Paderborn

------------------------------

Date: 30 Jan 90 23:06:04 GMT
From: cspi![e-mail]  (Cathy Segedy)
Subject: Robin, games, particularly for young children
Message-ID: <[e-mail]>

Hello.  I have a four-year old nephew who has access to a DEC Robin
running CPM.  I don't know much about the machine, but I was wondering
if there was anyone out there who might have some games for a youngster
to play.  Shareware, public domain, even for pay.
                    any help would be most appreciated.
                        cathy segedy
PS -- please send replies to me, as I am not sure if we get this newsgroup
decvax!cspi!segedy, apollo!cspi!segedy, uunet!tci!cspi!segedy

------------------------------

Date: 29 Jan 90 10:46:29 GMT
From: mcsun!sunic!sics.se!sics.se![e-mail]  (Kent Boortz)
Subject: Sharp MZ-3500
Message-ID: <[e-mail]>

A friend of mine has got an old Sharp MZ-3500 for free and asked
me if his his 9 years old son could use it to run some public
domain games.
  There are two different system diskettes with it. EOS, I think
it is an CP/M 2.2 clone, and FDOS.

    Does anyone have information about this machine, these
    operating systems and what operating system to use?

    Does anyone have the 22DISK (a good shareware program to
    read CP/M diskettes in a MSDOS PC) definitions for the diskette
    types (the different system disks use different formatting,
    I tried to define the EOS format but failed, (to me, a very
    strange sector order))?

    Does anyone know of suitable games for a 9 years old
    boy to run on it?

    Does anyone know the RS-232 pinout on the PCB connector
    (there is no real connector)?

Kent Boortz
[e-mail]



------------------------------

Date: 29 Jan 90 03:28:27 GMT
From: sdcc6!sdcc13![e-mail]  (Jerry Lugert)
Subject: Z100=cpm? Need startup software
Message-ID: <[e-mail]>

I recently bought a Zenith data systems Z100 with a 20 meg hardrive
and a turbo boost toggle switch?? for fifty bucks at a garage sell.
It's a 1986 model heath kit.

I don't know if it works, it didn't come with a manual or software.
Is this a cpm based machine?

Do you know where I can get some startup software?

Jerry
[e-mail]

------------------------------

Date: 31 Jan 90 02:48:37 GMT
From: astroatc!nicmad!madnix![e-mail]  (David Douthitt)
Subject: Z100 = CPM? Yes.
Message-ID: <[e-mail]>

In article <[e-mail]> [e-mail] (Jerry Lugert) writes:
|
| I recently bought a Zenith data systems Z100 with a 20 meg hardrive
| and a turbo boost toggle switch?? for fifty bucks at a garage sell.
| It's a 1986 model heath kit.
|
| I don't know if it works, it didn't come with a manual or software.
| Is this a CPM-based machine?

It's an MSDOS / CPM hybrid - comes with an 8080 and 8085 set of micro-
processors.  MSDOS and CPM dont CO-process; its a complete tradeoff.
From what I've heard, the MSDOS part is a kludge and not very compatible.
I wanted one of those when they came out... I hope you enjoy it!

    [david]

--
!======= David Douthitt :::: Madison, WI =======!== The Stainless Steel Rat ==!
!  ArpaNet: madnix![e-mail]              !                             !
!  UseNet: ...uwvax!astroatc!nicmad!madnix!rat  !  Mad Apple Forth:           !
!               {decvax!att}!                   !  The Madness starts here.   !

------------------------------

Date: 30 Jan 90 09:23:34 GMT
From: snorkelwacker!spdcc!merk!alliant!linus!nixbur!nixpbe!peun11![e-mail]  (Moellers)
Subject: Z80MU
Message-ID: <[e-mail]>

[e-mail] (Steve Croft) writes:

[... stuff about Z80MU deleted ...]

>We find the program useful and would like to move it to unix, if we can
>get the code.

As far as I know, Z80MU relies heavily on the similarities between
MESSDOS and CP/M to simplify the whole system.
You'll probably have to simulate MESSDOS or even CP/M to run Z80MU.

regards
Josef Moellers                      |    c/o Nixdorf Computer AG
 USA: uunet!philabs!linus!nixbur!mollers.pad  |    Abt. DX-PC
!USA: mcvax!unido!nixpbe!mollers.pad          |    Pontanusstr
Phone: [phone]              |    D-4790 Paderborn

------------------------------

End of INFO-CPM Digest V90 Issue #15
************************************
31-Jan-90 23:56:24-MST,5750;000000000000
Mail-From: KPETERSEN created at 31-Jan-90 23:47:42
Return-Path: <[e-mail]>
Date: Wed, 31 Jan 90 23:47:42 MST
From: [e-mail]
Reply-To: [e-mail]
Subject: INFO-CPM Digest V90 #16
To: [e-mail]

INFO-CPM Digest             Wed, 31 Jan 90       Volume 90 : Issue   16

Today's Topics:
               determining program name under CP/M PLUS
                      PD Software for SuperBrain
                      Trenton Computer Festival
                            Z80MU (2 msgs)
----------------------------------------------------------------------

Date: Wed, 31 Jan 90 10:53:10 PST
From: Bridger Mitchell <[e-mail]>
Subject: determining program name under CP/M PLUS
Message-ID: <9001311853.AA10946@newton>

  (Georg Wittig) mcsun!unido!gmdzi![e-mail] asked:

>> Does there exist a standard way to determine the name of the current
>> program from within a program under CP/M PLUS?

If you are running Z3PLUS (the Z-System version for CP/M 3) there is a
standard library function in the assembly-language Z3LIB package that
will return the name of the current program.  This, and the SYSLIB
package, are a great aid in applications programming.

If you are running only CP/M 3, the system saves the last command line
in a buffer in a CP/M 3 RSX.  In principle this can be located from
flags and pointers in the System Control Block; there is no system call
for that purpose, and I don't know of a canned routine to do it.
Perhaps someone else does.

The CP/M 3 archives on simtel20 include a file that has more
information about the SCB than is found in the CP/M 3 manuals.  It's
in a library (whose name I have forgotten) devoted to a z80
replacement for the stock CP/M 3 CCP.COM, developed in Canada before
Z3PLUS was available.

-- bridger mitchell

------------------------------

Date: 30 Jan 90 14:27:05 GMT
From: att!laidbak![e-mail]  (Luke Weerts)
Subject: PD Software for SuperBrain
Message-ID: <[e-mail]>

In article <[e-mail]> [e-mail] (Timothy Swenson) writes:
>
>    I am looking for some Public Domain software
>for my SuperBRain II.  I am interested in Languages(
>Pascal and C) and other utility programs.
>    I have tried software from other CP/M machines, but
>they do not seem to run right.
>    Hope some one can find me some.  Thanks in advance.
>
>        Tim Swenson
>
>    [e-mail]


Not  knowing what you mean by 'run right', I'll suggest my best source
for PD CP/M software especially in the 'C' vein as:

C Users Group
2601 Iowa St.
Lawrence, KS. 66047
[phone]

They offer their stuff in a wide variety of disk formats at a very
reasonable rate.  They offer two catalogs of available software as
well as a monthly magazine 'C Users Journal'.

If memory serves me correctly isn't the Superbrain what they originally
stuck into the Kaypros albeit with a different disk?

Hope this helps.

Luke

--
Luke Weerts, Software Technologies Group        | [e-mail]
INTERACTIVE Systems Corporation, Naperville, IL | ...!{sun,ico}!laidbak!luke

------------------------------

Date: Wed, 31 Jan 1990  23:44 MST
From: Keith Petersen <[e-mail]>
Subject: Trenton Computer Festival
Message-ID: <[e-mail]>

Relayed from RCP/M Royal Oak...

Msg 098 is 14 line(s) on 01/13/90 from BOB CLYNE
to ALL about TRENTON COMPUTER FESTIVAL

   I just received word that the Trenton (NJ) Computer Festival will be
held April 21 & 22 this year.  The location has been changed to Mercer
County College though.  The flyers are not out yet but if you want to be
put on the mailing list send a postcard to:

     TCF Database
     c/o ACGNJ
     P.O. Box 135
     Scotch Plains, NJ 07076

asking to be put on the mailing list.  They are reportedly preparing the
flyers now since some of the arrangements for the new location have just
been completed.
                                        Bob Clyne

------------------------------

Date: 31 Jan 90 16:48:42 GMT
From: ea.ecn.purdue.edu![e-mail]  (Jeffrey J Wieland)
Subject: Z80MU
Message-ID: <[e-mail]>

In article <[e-mail]> [e-mail] (Moellers) writes:
>[e-mail] (Steve Croft) writes:
>[... stuff about Z80MU deleted ...]
>As far as I know, Z80MU relies heavily on the similarities between
>MESSDOS and CP/M to simplify the whole system.
>You'll probably have to simulate MESSDOS or even CP/M to run Z80MU.

I have successfully run Z80MU under the DOS WINDOWS on our Sun 4
(SparkStation 1).  I didn't test it exhautively, but it seemed to run
WordStar, Turbo Pascal, and Turbo Modula II without difficulty.
It will probably run under any decent(?) MESSYDOS emulator for UNIX.
I always wanted to try it on one of the DOS-73 coprocessor board for
the UNIX-PC's.
--
                Jeff Wieland
            [e-mail]

------------------------------

Date: 1 Feb 90 04:02:43 GMT
From: usenet.ins.cwru.edu!cwjcc!ncoast![e-mail]  (Mike Squires)
Subject: Z80MU
Message-ID: <[e-mail]>

[e-mail] (Steve Croft) writes:

[... stuff about Z80MU deleted ...]

>We find the program useful and would like to move it to unix, if we can
>get the code.

Z80MU runs under VP/ix under XENIX 386 and I assume UNIX 386.  Very
strange - LU in one window and GNU EMACS in another......

------------------------------

End of INFO-CPM Digest V90 Issue #16
************************************